TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Magnum Sterling Chromite II Braided Throttle Cable 3351S

$50.99 Magnum Black Pearl Alternataive Length Braided Idle Cable p1901951 1901949 $50.99 Manufacturer: Magnum Dennis Kirk Part #: 1901949 Magnum Black Pearl Alternataive Length Braided Idle Cable: Manufacturer part # p1901951 - DennisKirk Part # 1901949 - State-of-the-art idle cable by Magnum. Black Pearl braid features black-chrome fittings. Advanced multi-strand design for superior flexibility. Polyethylene inner lining ensures smooth, trouble-free operation. PVC and high-temperature polyester moisture barrier under the braiding keeps out the elements and prolongs life. Made in the U.S.A.. Alternative length cable, , NOTE: , Length given is length of outer housing only, excluding elbows, , All pre-96 cables have threaded elbows; 96 and later cables have non-threaded elbows, , Specs: , Housing Length: 45 1/2", Overall Length: 55 5/8", Travel: 4 3/4".. p1901951 1 on hand More Info/Options for Magnum Black Pearl Alternataive Length Braided Idle Cable p1901951 1901949

$50.99 K & N Factory-Style Filter Element SU-5503 $50.99 Manufacturer: K & N Dennis Kirk Part #: 30379 K & N Factory-Style Filter Element: Manufacturer part # SU-5503 - NON-RESTRICTIVE - dust and dirt will not clog the filter because they remain on the outside of the element. FREE-FLOWING - despite the outer layer of trapped dust and dirt, air flow between the particles remains virtually unaffected. MOISTURE-RESISTANT - moisture will not clog the oil-saturated element, even completely wet, the filter will allow the engine to breathe freely. MINIMAL-SERVICE - because dirt particles that build up on the outside of the element actually aid in the filtering action, frequent cleaning is not required. Unaffected by pollution control devices - oil breather blow-by is absorbed in the fabric without effect. All K & N air filters must be treated with filter oil before installation. , , Note: For S100 aerosol cleaner 21 oz can, use part number 31-379.. SU-5503 1 on hand More Info/Options for K & N Factory-Style Filter Element SU-5503

$50.99 Covington Cycle City Rear Master Cylinder Cover p574169 574170 $50.99 Manufacturer: Covington Cycle City Dennis Kirk Part #: 574170 Covington Cycle City Rear Master Cylinder Cover: Manufacturer part # p574169 - DennisKirk Part # 574170 - CNC-machined from billet aluminum. Include mounting hardware. Sold each. Also available in black - Part No. 574169.. p574169 2 on hand More Info/Options for Covington Cycle City Rear Master Cylinder Cover p574169 574170

$50.99 Maier Rear Fender 12510 617662 $50.99 Manufacturer: Maier Dennis Kirk Part #: 617662 Maier Rear Fender: Manufacturer part # 12510 - DennisKirk Part # 617662 - Exact fit for each model listed. High-density polyethylene construction. Color-matched to the original equipment. Fork/drum guards, fork/disc guards, radiator scoops and side panels sold in pairs, decals sold separately; front and rear fenders sold each. Rear fenders do not include splash guard. Use stock mounting hardware. Drilling is required. , , Explosion Red will match CRF 2006.. 12510 3 on hand More Info/Options for Maier Rear Fender 12510 617662

CLEARANCE! Was: $67.99 Now: $50.99 AFX FX-9 Helmet 0110-0491 $50.99 Manufacturer: AFX Dennis Kirk Part #: 3300620XS AFX FX-9 Helmet: Manufacturer part # 0110-0491 - DOT certified. Made of thermoplastic poly alloy. Ultra-lightweight shell design. Clear-coat finish protects helmet paint and graphics, while providing a great-looking shine. Replaceable, adjustable forehead vent and non-adjustable chin vents provide increased airflow and reduced wind noise. Washable, plush-brushed, hypoallergenic nylon liner. Ballistic nylon chin bar liner for durability and good looks. Painted, three-screw AFX Air Force visor. Two aluminum visor screws and new design center screw. Square type D-ring with chin strap holder. Medium helmet weighs 3 lb. 5 oz... 0110-0491 3 on hand More Info/Options for AFX FX-9 Helmet 0110-0491

$50.99 Sunstar Sprocket 2438344 $50.99 Manufacturer: Sunstar Dennis Kirk Part #: 80509544S Sunstar Sprocket: Manufacturer part # 2438344 - High quality, all steel sprockets meet the demands of todays highest horsepower machines. Powerdrive countershaft (front) sprockets are manufactured from case-hardened chromoly steel for the ultimate in strength and durability. They also receive a parkerizing surface treatment for rust and corrosion resistance. Sunstar steel rear sprockets are manufactured from the highest quality 1045 high-carbon steel, and most are heat treated for added strength and wear resistance. Computer designed weight reduction holes are included where possible. Most rear sprockets are zinc plated, and some have a baked-on durable paint for corrosion resistance. Many conversions are available from unpopular 632 and 532 sizes to 630 and 530 sizes for better chain selection, as well as other lighter-weight options for racing. Any time you use other than the standard front/rear sprocket sizes, clearance must be checked. When converting to a smaller chain size, especially for racing, be sure to use the highest grade 0-ring chain available (non-O-ring heavy-duty acceptable for drag racing). , NOTE: At this time we are not able to specify on our website the standard tooth sizes of the sprockets or size and length of chain for your motorcycle. We will display every sprocket that fits. If you need the standard tooth size information or chain size and length, call us toll-free 800-969-7504.. 2438344 1 on hand More Info/Options for Sunstar Sprocket 2438344

$50.99 Maier Universal-Fit Rear Number Plate 50990 $50.99 Manufacturer: Maier Dennis Kirk Part #: 617014 Maier Universal-Fit Rear Number Plate: Manufacturer part # 50990 - Tough polyethylene construction. Solid background design. Rear plate attaches to grab rail. Includes mounting hardware. Measure 10 1/2" W x 9" H.. 50990 1 on hand More Info/Options for Maier Universal-Fit Rear Number Plate 50990

$50.99 Stud Boy Super Stock Carbide Wear Rods POL-R2079-40 $50.99 Manufacturer: Stud Boy Dennis Kirk Part #: 031317 Stud Boy Super Stock Carbide Wear Rods: Manufacturer part # POL-R2079-40 - Large 1/2" diameter host bar for long life and great handling. Front and rear carbide pads to increase durability. Has four inches of 90° control carbide. Great for sleds without studs or conservatively studded. Angle cut at rear of bar to ease trailer unloading. Easy installation. , Some models require drilling extra holes in skis to mount carbides.Dennis Kirk recommends removing any paint from the studs before use by wire brushing. , Wear Rods replace hte originals exactly on all models except those with "EZ-Steer" either as OEM or aftermarket. If your model was equipped with EZ steer it will be eliminated with the installation of these carbides. These will replace both the original plate and 2-stud, 14 3/4 wear rod with a 3 stud, 28 1/2 in. design.. POL-R2079-40 7 on hand More Info/Options for Stud Boy Super Stock Carbide Wear Rods POL-R2079-40

$50.99 Arlen Ness Grooved Shift Peg 07-473 $50.99 Manufacturer: Arlen Ness Dennis Kirk Part #: 493463 Arlen Ness Grooved Shift Peg: Manufacturer part # 07-473 - Black anodized pegs feature male mounts. Shift pegs sold each Matching footpegs - DK part no: 493465. Made in the U.S.A... 07-473 1 on hand More Info/Options for Arlen Ness Grooved Shift Peg 07-473

$50.99 Magnum Sterling Chromite II Braided Throttle Cable 3301 $50.99 Manufacturer: Magnum Dennis Kirk Part #: HC913 Magnum Sterling Chromite II Braided Throttle Cable: Manufacturer part # 3301 - State of the art throttle cable by Magnum. Patented Sterling Chromite® II metal braiding has a tough enamel coating for no scratch application and lasting, chrome-like brilliancy. Advanced multi-strand design for superior flexibility. Polyethylene inner lining ensures smooth, trouble-free operation. PVC and high-temperature polyester moisture barrier under the braiding keeps out the elements and prolongs life. Chrome fittings. Stock length for models listed , NOTE: Length given is length of outer housing only, excluding elbows (check your length), , NOTE: All pre-96 cables have threaded elbows; 96 and later cables have non-threaded elbows Specs: Elbow: 45 degrees Travel: 3 3/4 in. Handlebar fitting: Threaded, OEM number: 56324-81C, , Alternative length braided throttle cables for custom heigth/width handlebars on FX/FL modles 1981-1989: , #HC921 (33 3/4" w/90° elbow), #HC922 (39 1/2" w/90° elbow ), #HC925 (42 1/2" w/70° elbow), #HC913 (32 1/2" w/45° elbow), #HC914 (38" w/45° elbow ). 3301 2 on hand More Info/Options for Magnum Sterling Chromite II Braided Throttle Cable 3301

$50.99 Magnum 3/8 in./10mm 90 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line 37229 $50.99 Manufacturer: Magnum Dennis Kirk Part #: 198972 Magnum 3/8 in./10mm 90 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line : Manufacturer part # 37229 - Revolutionary new concept in aftermarket H-D steel-braided brake lines. One-piece upper lines feature brazed-on fittings that screw into the junction block at one end and the master cylinder at the other. Lines feature Magnum's Sterling Chromite II finish; fittings are polished chrome. Now it's easier to make brake line changes when installing new handlebars since you only have to replace the upper line. Upper lines are available in 11 in. - 39 in. lengths with 90 degree, 35 degree or straight upper banjo fittings, ensuring a clean, custom look in any application. Meet DOT MVSS-106 specifications. Made in 29 in. with one 10mm 90 degree banjo and one 3/8 in.-24 female inverted flare. , 2. (2) 10mm crush washers , NOTE: , Upper and lower lines must be purchased separately (See below for Part No., Lower Brake Line Assemlies FXST/I/C, FXSTB/I, FXSTD/I 1984-2008; FXDWG 1993-2005 with single disc, Part No. H19971, , FLHR/C/I, FLHT, FLHTC/I, FLHTCU/I, FLTR/I 1994-2007 with dual disc, Part No. H19975, , FLST/C/I, FLSTF/I, FLSTN 1987-2008 with single disc, Part No. H19972, , FXD 1995-2008; FXDL 2001-2007; XL/H 883/C/Dlx/Hugger, XL/H 1200/C 1987-2003 with single disc, Part No. H19973, , FXDX, FXDXT 1998-2005; FXDL 1993-1999; XL 1200S 1996-2003; XL 883R 2002-2003 with dual disc, Part No. H19974, , XL 883/L/C, 1200C 2004-2008 with single disc, Part No. 199151. 37229 2 on hand More Info/Options for Magnum 3/8 in./10mm 90 Degree Custom Sterling Chromite II Designer Series Upper Front Brake Line 37229

$50.99 Steffes OEM Replacement Skis 1061 $50.99 Manufacturer: Steffes Dennis Kirk Part #: 1061 Steffes OEM Replacement Skis: Manufacturer part # 1061 - Made in the U.S.A. of high-quality steel, Steffes skis offer optimum reliability and performance. All leaf spring-type skis match the latest updated version from the OEMs and include a shock bracket. Durable, high-gloss black finish.. 1061 9 on hand More Info/Options for Steffes OEM Replacement Skis 1061

$50.99 Sno-Stuff Mini Dolly Set 710-300 $50.99 Manufacturer: Sno-Stuff Dennis Kirk Part #: 28494 Sno-Stuff Mini Dolly Set: Manufacturer part # 710-300 - An inexpensive way to save yourself from backbreaking work. Dollies feature thick 1/8" steel deck plates with three heavy-duty plastic swivel wheels. Dollies won't tip over and have a rubber pad in the center so skis won't slide off. Compact design can be stored easily. Set of three universal pieces. 2 1/2" plastic castors.. 710-300 More than 10 on hand More Info/Options for Sno-Stuff Mini Dolly Set 710-300

$50.99 Excella OF-219 Enduro Competition Tire OF219 $50.99 Manufacturer: Excella Dennis Kirk Part #: 642980 Excella OF-219 Enduro Competition Tire: Manufacturer part # OF219 - Rated for speeds up to 93mph. Excella's most aggressive off-road performance tire, DOT- and FIM-approved. This has a full 15/32 in. of tread depth for excellent traction on every surface, from hard-pack to loose dirt. Natural rubber compound with a rugged casing for outstanding traction and tread life. FIM-competition approved. Sidewall ID Information: Excella 80/100-21 M/C 51P OF219 Enduro Competition. , Dimensions:, Inflated Width/Measuring Rim Width: Not Available, Inflated Diameter: Not Available, Acceptable Rim Width: Not Available, Deepest Tread Depth: 14/32 in., Balance Dot: None, Directional Arrow: None, Speed Rating : P-Rated up to 93 MPH, , Capacities and Construction:, Load Capacity/Inflation Pressure: 430 LBS/33 PSI, Load Range: B, Bias or Radial Ply: Bias, Tread Plies/Material: Not Specified/Nylon, Sidewall Plies/Material: Not Specified/Nylon, DOT Approved for Road Use: Yes, Tube or Tubeless: Tube-Type, , NOTE: A new tube and rim strip is recommended with every new tire. OF219 4 on hand More Info/Options for Excella OF-219 Enduro Competition Tire OF219

$50.99 Magnum Sterling Chromite II Braided Throttle Cable 3304 $50.99 Manufacturer: Magnum Dennis Kirk Part #: HC919 Magnum Sterling Chromite II Braided Throttle Cable: Manufacturer part # 3304 - State of the art throttle cable by Magnum. Patented Sterling Chromite® II metal braiding has a tough enamel coating for no scratch application and lasting, chrome-like brilliancy. Advanced multi-strand design for superior flexibility. Polyethylene inner lining ensures smooth, trouble-free operation. PVC and high-temperature polyester moisture barrier under the braiding keeps out the elements and prolongs life. Chrome fittings. , , NOTE: Length given is length of outer housing only, excluding elbows (check your length), , NOTE: All pre-96 cables have threaded elbows; 96 and later cables have non-threaded elbows, , Specs: , Elbow: 45 degrees, Travel: 5 1/4 in., Handlebar fitting: Threaded, , For alternate length cable: , #HC920 (36"), #HC926 (31 3/4"). 3304 2 on hand More Info/Options for Magnum Sterling Chromite II Braided Throttle Cable 3304

$50.99 Magnum Sterling Chromite II Braided Throttle Cable 3307 $50.99 Manufacturer: Magnum Dennis Kirk Part #: HC925 Magnum Sterling Chromite II Braided Throttle Cable: Manufacturer part # 3307 - State of the art throttle cable by Magnum. Patented Sterling Chromite® II metal braiding has a tough enamel coating for no scratch application and lasting, chrome-like brilliancy. Advanced multi-strand design for superior flexibility. Polyethylene inner lining ensures smooth, trouble-free operation. PVC and high-temperature polyester moisture barrier under the braiding keeps out the elements and prolongs life. Chrome fittings. , NOTE: Length given is length of outer housing only, excluding elbows (check your length), , NOTE: All pre-96 cables have threaded elbows; 96 and later cables have non-threaded elbows, , Specs: , Elbow: 70 degrees, Travel: 3 3/4 in., Handlebar fitting: Threaded, OEM number: 56327-81B, , Alternative length braided throttle cables for custom heigth/width handlebars on FX/FL modles 1981-1989: , #HC921 (33 3/4" w/90° elbow), #HC922 (39 1/2" w/90° elbow ), #HC925 (42 1/2" w/70° elbow), #HC913 (32 1/2" w/45° elbow), #HC914 (38" w/45° elbow ). 3307 1 on hand More Info/Options for Magnum Sterling Chromite II Braided Throttle Cable 3307

$50.99 Magnum Sterling Chromite II Braided Throttle Cable 3309 $50.99 Manufacturer: Magnum Dennis Kirk Part #: HC927 Magnum Sterling Chromite II Braided Throttle Cable: Manufacturer part # 3309 - State of the art throttle cable by Magnum. Patented Sterling Chromite® II metal braiding has a tough enamel coating for no scratch application and lasting, chrome-like brilliancy. Advanced multi-strand design for superior flexibility. Polyethylene inner lining ensures smooth, trouble-free operation. PVC and high-temperature polyester moisture barrier under the braiding keeps out the elements and prolongs life. Chrome fittings. , NOTE: Length given is length of outer housing only, excluding elbows (check your length), , NOTE: All pre-96 cables have threaded elbows; 96 and later cables have non-threaded elbows, , Specs: , Elbow: 90 degrees, Travel: 5 in., Handlebar fitting: Threaded, OEM number: 56356-92, , For alternative length braided throttle cables for custom height/width handlebars on Dresser, Dyna Glide, and Softail models 90-95: , #HC915 (30"), #HC927 (32 1/2"), #198806 (34 1/2"), #HC916 (36"), #198807 (36 1/2"), #HC928 (38"), #HC931 (39 1/2"), #198808 (42"), #198809 (44"), #HC932 (45 1/2"), #198811 (48"). 3309 2 on hand More Info/Options for Magnum Sterling Chromite II Braided Throttle Cable 3309