TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Sno-Stuff X-Calibar II Carbide Wear Rods 505-115

$51.99 Winderosa Engine Complete Gasket Set/2 Cylinder 711214 $51.99 Manufacturer: Winderosa Dennis Kirk Part #: 261489 Winderosa Engine Complete Gasket Set/2 Cylinder: Manufacturer part # 711214 - Complete gasket sets contain all necessary engine gaskets for a complete rebuild. They include cylinder head, base, intake and exhaust manifold gaskets or O-rings and crankshaft end seals. Single cylinder sets contain crankcase gasket where required.. 711214 More than 10 on hand More Info/Options for Winderosa Engine Complete Gasket Set/2 Cylinder 711214

$51.99 Oxlite CV Boot Brush Guards 21470 $51.99 Manufacturer: Oxlite Dennis Kirk Part #: 513469 Oxlite CV Boot Brush Guards: Manufacturer part # 21470 - Protect CV joints and rubber boots on 4WD ATVs. Made from steel to take serious shocks. Specific fit to each model for bolt-on ease.. 21470 1 on hand More Info/Options for Oxlite CV Boot Brush Guards 21470

$51.99 UFO Kawasaki Radiator Shrouds KA02728026 $51.99 Manufacturer: UFO Dennis Kirk Part #: 610045 UFO Kawasaki Radiator Shrouds: Manufacturer part # KA02728026 - Plastic is color-matched to stock or in optional works colors. Pre-drilled pieces mount easily to stock locations. Made in Italy.. KA02728026 2 on hand More Info/Options for UFO Kawasaki Radiator Shrouds KA02728026

$51.99 AGV Anti-Scratch Shield 01300013 $51.99 Manufacturer: AGV Dennis Kirk Part #: 325121 AGV Anti-Scratch Shield: Manufacturer part # 01300013 - All AGV/MDS shields are UV-B protected.. 01300013 2 on hand More Info/Options for AGV Anti-Scratch Shield 01300013

$51.99 PIAA ATV Sport Mounting Bracket 74566 $51.99 Manufacturer: PIAA Dennis Kirk Part #: 212666 PIAA ATV Sport Mounting Bracket: Manufacturer part # 74566 - Lightweight brackets provide solid aluminum mounting for holding indicator lights and your ignition key. Mounts lights to your handlebar so light points in the direction you are steering. Easy to install in stock location using existing hardware.. 74566 1 on hand More Info/Options for PIAA ATV Sport Mounting Bracket 74566

$51.99 Kuryakyn Oil Line Nacelle 8204 $51.99 Manufacturer: Kuryakyn Dennis Kirk Part #: H49383 Kuryakyn Oil Line Nacelle: Manufacturer part # 8204 - This die cast chrome cover replaces the wrinkle black or plain cast surface where the oil pump used to be on previous engines. The stock chrome oil lines poke through the center of the cover for a high tech appearance. Chrome transmission shroud H49-392 highly recommended with this cover for maximum flash. Sold each.. 8204 1 on hand More Info/Options for Kuryakyn Oil Line Nacelle 8204

$51.99 Pivot Works Swingarm Bearing Kit PWSAKH33021 $51.99 Manufacturer: Pivot Works Dennis Kirk Part #: 123008 Pivot Works Swingarm Bearing Kit: Manufacturer part # PWSAKH33021 - Provides precise smooth action through entire arc of travel. Replace failing, worn components - restore handling and suspension control. Kit contains front swingarm pivot pins/bearings only. Manufactured to OEM specifications for a perfect fit. Considerable savings over OEM prices. Do not include shock pivot point bearings.. PWSAKH33021 1 on hand More Info/Options for Pivot Works Swingarm Bearing Kit PWSAKH33021

$51.99 Joker Machine Point End Caps 03-96 $51.99 Manufacturer: Joker Machine Dennis Kirk Part #: 595588 Joker Machine Point End Caps: Manufacturer part # 03-96 - Fits 59-5584, 595585 grips.. 03-96 1 on hand More Info/Options for Joker Machine Point End Caps 03-96

$51.99 GBC Dirt Devil II Tire AD1028 $51.99 Manufacturer: GBC Dennis Kirk Part #: 653037 GBC Dirt Devil II Tire: Manufacturer part # AD1028 - Reinforced lugs, traction spikes and an aggressive pattern provides grip in sloppy or sandy terrain. Heavy-duty construction. , , DIMENSIONS, Inflated Width/Measuring Rim Width: 8.00" / 6.50", Inflated Diameter: 21.90", Acceptable Rim Width: 6.50", Deepest Tread Depth: 20/32", Balance DOT: No, Directional Arrow: Yes, , CAPACITIES AND CONSTRUCTION, Load Capacity: 275 lbs., Bias or Radial Ply: Bias, Maximum Inflation Pressure to Seat Bead: 36 psi, Maximum Operating Pressure: 7 psi, Tread Plies/Material: 6 Nylon, Sidewall Plies/Material: 6 Nylon, DOT Approved for Road Use: No, Tube or Tubeless: Yes-either, Wheel Recommendation: Beadlock. AD1028 4 on hand More Info/Options for GBC Dirt Devil II Tire AD1028

$51.99 EBC Double H Sintered Metal Brake Pads FA4174HH $51.99 Manufacturer: EBC Dennis Kirk Part #: 1901019 EBC Double H Sintered Metal Brake Pads: Manufacturer part # FA4174HH - Feature a friction rating of HH - the highest in the industry. Last twice as long as organic pads an provide maximum brake effect. , NOTE: All brake pads and shoes are sold in sets for one disc or drum. Order one set for each disc or drum on your motorcycle, NOTE: Never use sintered metal brake pads in bikes originally equipped with non-sintered pads. FA4174HH 3 on hand More Info/Options for EBC Double H Sintered Metal Brake Pads FA4174HH

$51.99 Barnett Platinum Series Idle Cable 34201PS $51.99 Manufacturer: Barnett Dennis Kirk Part #: 199843 Barnett Platinum Series Idle Cable: Manufacturer part # 34201PS - Smooth-working, durable, made with the finest components available and virtually indestructible; these can only describe Barnett cables. Platinum Series cables feature a bright, silver-plated braided cover. Clutch cables available with standard nylon-lined, PVC-coated casings or in easy-pull high-efficiency design. 31" long. 90 degree elbow. , , NOTE: Length given is that of the outer housing only, excluding elbows and/or adjusters. 34201PS 1 on hand More Info/Options for Barnett Platinum Series Idle Cable 34201PS

$51.99 Klock Werks 3 1/2 in. End Cap p4403826 4403830 $51.99 Manufacturer: Klock Werks Dennis Kirk Part #: 4403830 Klock Werks 3 1/2 in. End Cap: Manufacturer part # p4403826 - DennisKirk Part # 4403830 - End caps allow you to customize your look. Sold each. Fits: WFB Performance Slip-On Mufflers: part numbers 4403822 and 4403824 WFB 3 1/2 in. Performance Slip-On Mufflers: part numbers 4403842, 4403840, 4403838, 4403836, 4403841, 4403839, 4403837 and 4403835. p4403826 Expected Soon More Info/Options for Klock Werks 3 1/2 in. End Cap p4403826 4403830

$51.99 Excella OF230 Intermediate-To-Hard Terrain Front Tire 03120105 $51.99 Manufacturer: Excella Dennis Kirk Part #: 643153 Excella OF230 Intermediate-To-Hard Terrain Front Tire: Manufacturer part # 03120105 - Designed for outstanding intermediate-to-hard performance. Shoulder knobs provide excellent grip in both dry and wet conditions. Compounded for long wear and great traction. Tube Type Tire. Sidewall ID Information: Excella 80/100-21(90/90-21) OF230 M/C 51M M+S Super Cross. , Dimensions:, Inflated Width/Measuring Rim Width: Not Available, Inflated Diameter: Not Available, Acceptable Rim Width: Not Available, Deepest Tread Depth: 16/32 in., Balance DOT: None, Directional Arrow: None, Speed Rating : M-Rated up to 81 MPH, , Capacities and Construction:, Load Capacity/Inflation Pressure: 430 LBS/33 PSI, Load Range: B, Bias or Radial Ply: Bias, Tread Plies/Material: Not Specified/Nylon, Sidewall Plies/Material: Not Specified/Nylon, DOT Approved for Road Use: Yes, Tube or Tubeless: Tube-Type, , NOTE: A new tube and rim strip is recommended with every new tire. 03120105 2 on hand More Info/Options for Excella OF230 Intermediate-To-Hard Terrain Front Tire 03120105

$51.99 Hydro-Turf ATV Seat Cover p455427 455437 $51.99 Manufacturer: Hydro-Turf Dennis Kirk Part #: 455437 Hydro-Turf ATV Seat Cover: Manufacturer part # p455427 - DennisKirk Part # 455437 - Perfect replacements for covers that have been faded or damaged. Can be used to protect new seats from punctures and daily wear and tear. Top of seat cover is black carbon fiber and sides are black with white contrast stitching. Foam and base are not included.. p455427 2 on hand More Info/Options for Hydro-Turf ATV Seat Cover p455427 455437

$51.99 Show Chrome Ball-Milled Bullet Marker Light 16-108 $51.99 Manufacturer: Show Chrome Dennis Kirk Part #: 210759 Show Chrome Ball-Milled Bullet Marker Light: Manufacturer part # 16-108 - Die-cast bodies. Bezel has built-in visor which can be rotated to any position for custom mounting; set screw holds visor in desired position. 3 in. L x 2 3/8 in. dia.. 50-watt, 12-volt halogen bulb. Sold each. 16-108 3 on hand More Info/Options for Show Chrome Ball-Milled Bullet Marker Light 16-108

$51.99 K & N Factory-Style Filter Element SU-2599 $51.99 Manufacturer: K & N Dennis Kirk Part #: 304458 K & N Factory-Style Filter Element: Manufacturer part # SU-2599 - NON-RESTRICTIVE - dust and dirt will not clog the filter because they remain on the outside of the element. FREE-FLOWING - despite the outer layer of trapped dust and dirt, air flow between the particles remains virtually unaffected. MOISTURE-RESISTANT - moisture will not clog the oil-saturated element, even completely wet, the filter will allow the engine to breathe freely. MINIMAL-SERVICE - because dirt particles that build up on the outside of the element actually aid in the filtering action, frequent cleaning is not required. Unaffected by pollution control devices - oil breather blow-by is absorbed in the fabric without effect. All K & N air filters must be treated with filter oil before installation.. SU-2599 1 on hand More Info/Options for K & N Factory-Style Filter Element SU-2599

$51.99 Sno-Stuff X-Calibar II Carbide Wear Rods 505-115 $51.99 Manufacturer: Sno-Stuff Dennis Kirk Part #: 03714 Sno-Stuff X-Calibar II Carbide Wear Rods: Manufacturer part # 505-115 - From Sno-Stuff, the original X-Calibar carbide wear rods. Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance. Longer studs work with ski skins. X-Calibar II feature four inches of 60º center carbide. One-inch carbide pads front and rear. Hardweld filler between front and rear carbide for added wear resistance. , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides. 505-115 6 on hand More Info/Options for Sno-Stuff X-Calibar II Carbide Wear Rods 505-115

$51.99 Sno-Stuff X-Calibar II Carbide Wear Rods 505-428 $51.99 Manufacturer: Sno-Stuff Dennis Kirk Part #: 03987 Sno-Stuff X-Calibar II Carbide Wear Rods: Manufacturer part # 505-428 - From Sno-Stuff, the original X-Calibar carbide wear rods. Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance. Longer studs work with ski skins. X-Calibar II feature four inches of 60º center carbide. One-inch carbide pads front and rear. Hardweld filler between front and rear carbide for added wear resistance. , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides, , NOTE: , Wear rods replace the originals exactly on all models except those with E-Z Steer either as original equipment or installed later. For those models, the wear rods listed replace both the plate and the 2-stud, 14 3/4 in. wear rod with a 3-stud, 28 in. design. If you wish to retain the E-Z Steer plate, order part number 10533 for an X-Calibar I or part number 10610 for an X-Calibar III Plus design with 5 in. or 60º carbide. Both are 14 3/4 in. long. 505-428 4 on hand More Info/Options for Sno-Stuff X-Calibar II Carbide Wear Rods 505-428

$51.99 Sno-Stuff X-Calibar II Carbide Wear Rods 505-629 $51.99 Manufacturer: Sno-Stuff Dennis Kirk Part #: 031813 Sno-Stuff X-Calibar II Carbide Wear Rods: Manufacturer part # 505-629 - From Sno-Stuff, the original X-Calibar carbide wear rods. Bars feature various lengths of 60° center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance. All are painted to coordinate with the brand-neon green for Arctic Cat, purple for Polaris, yellow for Ski-Doo and red for Yamaha (remove paint from studs for easier installation). Longer studs work with ski skins. X-Calibar II feature four inches of 60° center carbide. One-inch carbide pads front and rear. 60° tapered carbide resists chipping. Hardweld filler between front and rear carbide for added wear resistance. NOTE: Some models require drilling extra hole(s) in skis to mount carbides.. 505-629 3 on hand More Info/Options for Sno-Stuff X-Calibar II Carbide Wear Rods 505-629