TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Sno-Stuff X-Calibar II Carbide Wear Rods 505-113

$51.99 Barnett Platinum Series Idle Cable 55401PS $51.99 Manufacturer: Barnett Dennis Kirk Part #: 199793 Barnett Platinum Series Idle Cable: Manufacturer part # 55401PS - Smooth-working, durable, made with the finest components available and virtually indestructible; these can only describe Barnett cables. Platinum Series cables feature a bright, silver-plated braided cover. Clutch cables available with standard nylon-lined, PVC-coated casings or in easy-pull high-efficiency design. 42 1/2" long. 90 degree elbow. , , NOTE: Length given is that of the outer housing only, excluding elbows and/or adjusters. 55401PS 1 on hand More Info/Options for Barnett Platinum Series Idle Cable 55401PS

$51.99 Russell Cycleflex Renegade Front Brake Line R08735B $51.99 Manufacturer: Russell Dennis Kirk Part #: 199067 Russell Cycleflex Renegade Front Brake Line: Manufacturer part # R08735B - Get an awesome look and stronger, more responsive braking from a name you can trust. Made-to-fit kits come ready to install for a perfect fit on stock machines. Teflon inner liner gives smooth fluid transfer. Stainless steel outer braid reduces brake-line expansion and looks great All lines are clear-coat and exceed OEM pressure specifications. Renegade lines have a twilight black finish. , , Included Items:. , 1. (2) 10mm crush washers. , 2. (2) 12mm crush washers. , 3. (1) 39" line with one straight 12mm banjo adapter and one 10mm 90 degree banjo adapter.. R08735B 1 on hand More Info/Options for Russell Cycleflex Renegade Front Brake Line R08735B

$51.99 Barnett Platinum Series Throttle Cable 34301PS $51.99 Manufacturer: Barnett Dennis Kirk Part #: 199866 Barnett Platinum Series Throttle Cable: Manufacturer part # 34301PS - Smooth-working, durable, made with the finest components available and virtually indestructible; these can only describe Barnett cables. Platinum Series cables feature a bright, silver-plated braided cover. Clutch cables available with standard nylon-lined, PVC-coated casings or in easy-pull high-efficiency design. 31 " long. 90 degree elbow. , , NOTE: Length given is that of the outer housing only, excluding elbows and/or adjusters.. 34301PS 1 on hand More Info/Options for Barnett Platinum Series Throttle Cable 34301PS

$51.99 Hydro-Turf ATV Seat Cover p455427 455436 $51.99 Manufacturer: Hydro-Turf Dennis Kirk Part #: 455436 Hydro-Turf ATV Seat Cover: Manufacturer part # p455427 - DennisKirk Part # 455436 - Perfect replacements for covers that have been faded or damaged. Can be used to protect new seats from punctures and daily wear and tear. Top of seat cover is black carbon fiber and sides are black with white contrast stitching. Foam and base are not included.. p455427 1 on hand More Info/Options for Hydro-Turf ATV Seat Cover p455427 455436

$51.99 Kimpex Polycarbonate Black Windshield 06-629-12 $51.99 Manufacturer: Kimpex Dennis Kirk Part #: 24238 Kimpex Polycarbonate Black Windshield: Manufacturer part # 06-629-12 - Stronger, resists scratching and retains flexibility in all weather. Outer edge trim is bonded to all windshields - attaching O-rings included where applicable. OEM-style replacement windshields constructed from optical grade .075 in. thick polycarbonate. Note: Color is opaque, high-gloss black Note: All windshields are protected with plastic shrinkwrap for shipping. Before removing, be certain that you are going to keep it. Windshields with plastic wrap removed are not returnable Note: This is an OEM design windshield; uses original clips to mount. 06-629-12 7 on hand More Info/Options for Kimpex Polycarbonate Black Windshield 06-629-12

$51.99 Barnett Platinum Series Idle Cable 41506PS $51.99 Manufacturer: Barnett Dennis Kirk Part #: 199787 Barnett Platinum Series Idle Cable: Manufacturer part # 41506PS - Smooth-working, durable, made with the finest components available and virtually indestructible; these can only describe Barnett cables. Platinum Series cables feature a bright, silver-plated braided cover. Clutch cables available with standard nylon-lined, PVC-coated casings or in easy-pull high-efficiency design. 30 1/2" long. 90 degree elbow. , , NOTE: Length given is that of the outer housing only, excluding elbows and/or adjusters. 41506PS 1 on hand More Info/Options for Barnett Platinum Series Idle Cable 41506PS

$51.99 Custom Chrome Primary Belt-8mm 43033 $51.99 Manufacturer: Custom Chrome Dennis Kirk Part #: H11164 Custom Chrome Primary Belt-8mm: Manufacturer part # 43033 - Fit most primary belt drive units on the road today. Bullseye belt, fits Big Twin with closed primary, and Kick or Electric start from E36-84. All Karata HTD with Tin Primaries. Replacement Primo belt number 30853-2-BE and Phase II 8mm Bullseye belt. NOTE: Belts have no warranty whatsoever .. 43033 2 on hand More Info/Options for Custom Chrome Primary Belt-8mm 43033

$51.99 Works Connection Hot Start Kit 16089 $51.99 Manufacturer: Works Connection Dennis Kirk Part #: 571831 Works Connection Hot Start Kit: Manufacturer part # 16089 - Made from lightweight yet rugged 6061 T-6 aluminum and anodized for additional strength. Includes lower and shorter hot start lever. Fits models listed in fitment that have existing Works Connection perch.. 16089 1 on hand More Info/Options for Works Connection Hot Start Kit 16089

$51.99 Cobra Alloy Grab Bar 504206 $51.99 Manufacturer: Cobra Dennis Kirk Part #: 492229 Cobra Alloy Grab Bar: Manufacturer part # 504206 - Constructed of lightweight aluminum alloy. Cobra Protec-Coat finish keeps the rail looking great. Rubber end caps protects the inside in all riding conditions. Antenna mount included.. 504206 2 on hand More Info/Options for Cobra Alloy Grab Bar 504206

$51.99 Sno-Stuff X-Calibar II Carbide Wear Rods 505-113 $51.99 Manufacturer: Sno-Stuff Dennis Kirk Part #: 03586 Sno-Stuff X-Calibar II Carbide Wear Rods: Manufacturer part # 505-113 - From Sno-Stuff, the original X-Calibar carbide wear rods. Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance. Longer studs work with ski skins. X-Calibar II feature four inches of 60º center carbide. One-inch carbide pads front and rear. Hardweld filler between front and rear carbide for added wear resistance. , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides. 505-113 More than 10 on hand More Info/Options for Sno-Stuff X-Calibar II Carbide Wear Rods 505-113

$51.99 Sno-Stuff X-Calibar II Carbide Wear Rods 505-427 $51.99 Manufacturer: Sno-Stuff Dennis Kirk Part #: 031079 Sno-Stuff X-Calibar II Carbide Wear Rods: Manufacturer part # 505-427 - From Sno-Stuff, the original X-Calibar carbide wear rods. Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance. Longer studs work with ski skins. X-Calibar II feature four inches of 60º center carbide. One-inch carbide pads front and rear. Hardweld filler between front and rear carbide for added wear resistance. , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides, , NOTE: , Wear rods replace the originals exactly on all models except those with E-Z Steer either as original equipment or installed later. For those models, the wear rods listed replace both the plate and the 2-stud, 14 3/4 in. wear rod with a 3-stud, 28 in. design. If you wish to retain the E-Z Steer plate, order part number 10533 for an X-Calibar I or part number 10610 for an X-Calibar III Plus design with 5 in. or 60º carbide. Both are 14 3/4 in. long. 505-427 6 on hand More Info/Options for Sno-Stuff X-Calibar II Carbide Wear Rods 505-427

$51.99 Sno-Stuff X-Calibar II Carbide Wear Rods 505-628 $51.99 Manufacturer: Sno-Stuff Dennis Kirk Part #: 031812 Sno-Stuff X-Calibar II Carbide Wear Rods: Manufacturer part # 505-628 - From Sno-Stuff, the original X-Calibar carbide wear rods. Bars feature various lengths of 60° center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance. All are painted to coordinate with the brand-neon green for Arctic Cat, purple for Polaris, yellow for Ski-Doo and red for Yamaha (remove paint from studs for easier installation). Longer studs work with ski skins. X-Calibar II feature four inches of 60° center carbide. One-inch carbide pads front and rear. 60° tapered carbide resists chipping. Hardweld filler between front and rear carbide for added wear resistance. NOTE: Some models require drilling extra hole(s) in skis to mount carbides NOTE: Wear rods replace the originals exactly on all models except those with E-Z Steer either as original equipment or installed later. For those models, the wear rods listed replace both the plate and the 2-stud, 14 3/4 in. wear rod with a 3-stud, 28 in. design. If you wish to retain the E-Z Steer plate, order part number 10533 for an X-Calibar I or part number 10610 for an X-Calibar III Plus design with 5 in. or 60° carbide. Both are 14 3/4 in. long. 505-628 5 on hand More Info/Options for Sno-Stuff X-Calibar II Carbide Wear Rods 505-628

$51.99 Magnum Polished Stainless Custom Single-Disc Brake Line p1902358 1902358 $51.99 Manufacturer: Magnum Dennis Kirk Part #: 1902358 Magnum Polished Stainless Custom Single-Disc Brake Line: Manufacturer part # p1902358 - DennisKirk Part # 1902358 - Polished stainless braid is more brilliant than regular stainless. 180 degree 12mm banjo fittings on the master cylinder end of the brake line (also available in 90 or 35 degree top angle). Polished stainless single-disc brake lines available in lengths of 40 in. - 58 in.. All lines have a 7/16 in. banjo fitting on the master cylinder end and a 90 degree 3/8 in./10mm banjo fitting on the caliper end. Crush washers and instruction sheet included.. p1902358 1 on hand More Info/Options for Magnum Polished Stainless Custom Single-Disc Brake Line p1902358 1902358

$51.99 Magnum Swivel-Fit Single Disc Front Brake Line p1902405 1902379 $51.99 Manufacturer: Magnum Dennis Kirk Part #: 1902379 Magnum Swivel-Fit Single Disc Front Brake Line: Manufacturer part # p1902405 - DennisKirk Part # 1902379 - Swivel-Fit design offers custom style with unmatched adaptability and fit. Sleek, factory-crimped polished chrome fittings. Swivel fitting is tucked under the lower triple-tree; corrects banjo orientation which eliminates kinking in the braided line. Constructed of Kevlar for extreme high-performance/safety ratings and dramatically reduced line expansion for improved lever feel. Covered with a crystal clear Teflon outer jacket for impressive protection against scuffing; outer jacket will never discolor. Three lower section lengths available to cover most stock fork applications. Lines use 7/16 in. banjo fittings at the master cylinder and 90 degree 3/8 in. banjo fittings at the caliper. Exceeds all DOT FMVSS-106 specifications. Made in the U.S.A., , Included Items , (1) Brake line 42 in. W/One 10MM 90 deg. banjo and one 12MM 90 deg. banjo fitting, (2) 10MM crush washers, (2) 12MM crush washers, (1) Hose mounting clamp, (1) Instructions sheet, , Stock Application Chart SOFTAIL FXST 00-06 , Total Length: 46 in., Lower Section Length: 22 in., Banjo Angle: 35 degree, Polished Stainless - #1902372, Black Pearl - #1902291, FXST/C 84-99 , Total Length: 48 in., Lower Section Length: 22 in., Banjo Angle: 180 degree, Sterling Chromite II - #1902465, FXSTC 07-08 , Total Length: 50 in., Lower Section Length: 22 in., Banjo Angle: 180 degree, Polished Stainless - #1902410, Black Pearl - #1902329, Sterling Chromite II - #1902467, FXSTD 00-07 , Total Length: 46 in., Lower Section Length: 22 in., Banjo Angle: 35 degree, Polished Stainless - #1902372, Black Pearl - #1902291, Sterling Chromite II - #1902429, FLST/F/C 87-07, FLSTN 93-96 , Total Length: 45 in., Lower Section Length: 20 in.,Banjo Angle: 35 degree, Polished Stainless - #1902369, Black Pearl - #1902288, Sterling Chromite II - #1902426 DYNA FXD 00-05 , Total Length: 40 in., Lower Section Length: 20 in., Banjo Angle: 35 degree, Sterling Chromite II - #1902424, Polished Stainless - #1902367, Black Pearl - #1902286, FXDB, FXDC, FXDL 92-05 , Total Length: 40 in., Lower Section Length: 20 in., Banjo Angle: 35 degree, Sterling Chromite II - #1902424, Polished Stainless - #1902367, Black Pearl - #1902286, FXDWG 06-07 , Total Length: 50 in., Lower Section Length: 24 in., Banjo Angle: 180 degree, Sterling Chromite II - #1902468, Polished Stainless - #1902411, Black Pearl - #1902330, FXDWG 93-05 , Total Length: 48 in., Lower Section Length: 22 in., Banjo Angle: 180 degree, Sterling Chromite II - #1902465, Polished Stainless - #1902408, Black Pearl - #1902327 XL XLH 86-91, XL883 Hugger 1987 , Total Length: 42 in., Lower Section Length: 20 in., Banjo Angle: 180 degree, Sterling Chromite II - #1902465. p1902405 1 on hand More Info/Options for Magnum Swivel-Fit Single Disc Front Brake Line p1902405 1902379

$51.99 Novello Handlebar Wire Extension Kit for CB Radio DNWHRC15 $51.99 Manufacturer: Novello Dennis Kirk Part #: 212821 Novello Handlebar Wire Extension Kit for CB Radio: Manufacturer part # DNWHRC15 - 12 wire. No cutting, soldering or hassle. Kits include color-coded wire, OEM pin connectors, 1/8 in. and 3/8 in. shrink tubing, complete instructions, illustration and wire block diagram. Can be internally wired through handlebars. , , NOTE: For 1996-2006 Harley-Davidson with a CB radio, , Must also order standard kit: 211742 without cruise, 211746 with cruise. DNWHRC15 1 on hand More Info/Options for Novello Handlebar Wire Extension Kit for CB Radio DNWHRC15

$51.99 EBC GFA Race Sintered Metal Brake Pads GFA263HH $51.99 Manufacturer: EBC Dennis Kirk Part #: 195525 EBC GFA Race Sintered Metal Brake Pads: Manufacturer part # GFA263HH - GFA series pads come with super-hard backing plates and vented, compact construction to prevent backplate bending during extreme use. Design produces a firmer brake lever and eliminates pad drag under race use. Outstanding performance and superb feel along with good durability. For track use ONLY, , NOTE: All brake pads and shoes are sold in sets for one disc or drum. Order one set for each disc or drum on your motorcycle, , NOTE: Never use sintered metal brake pads in calipers originally equipped with non-sintered brake pads. Check your owners manual to see if sintered metal brake pads are standard equipment on your motorcycle, , NOTE: Fits the following A.P. Racing caliper:, 6-piston 4466/4477 series.. GFA263HH 2 on hand More Info/Options for EBC GFA Race Sintered Metal Brake Pads GFA263HH

$51.99 Emgo OEM Replacement Mirror 2069794 $51.99 Manufacturer: Emgo Dennis Kirk Part #: 392732 Emgo OEM Replacement Mirror: Manufacturer part # 2069794 - Replaces OEM number 56600-41G00. Economical EMGO mirrors are available in a wide variety of shapes, sizes and finishes. Order the one listed for your motorcycle for an exact match, or simply order any with the correct method of attachment. , , Dimensions:, Mirror Width (Glass Only): 132mm/5-1/4in., Mirror Height (Glass Only): 84mm/3-1/4in., Stem Height: 76mm/3in., Stem Offset: 5in., Thread Size: Two 5mm x 20mm studs.. 2069794 1 on hand More Info/Options for Emgo OEM Replacement Mirror 2069794

$51.99 FMF TI-4 Aluminum Cone Cap w/Spark Arrester Screen 040176 $51.99 Manufacturer: FMF Dennis Kirk Part #: 447673 FMF TI-4 Aluminum Cone Cap w/Spark Arrester Screen: Manufacturer part # 040176 -. 040176