|
|
$415.95
Scorpion Oval Slip-On Muffler with Polished Stainless Steel Muffler Sleeve 4400626
Dennis Kirk Part #: 4400626
Scorpion Oval Slip-On Muffler with Polished Stainless Steel Muffler Sleeve 4400626: Manufacturer part # HA79 - High Exit High-performance mufflers that have been dyno- and track-proven to increase overall performance; very high mid-range performance boosts. Model-specific designs require no re-mapping or re-jetting. Stainless steel inner components. Space-technology sound absorption; never requires repacking and offers consistent sound. O2 Lambda sensor connectors are fitted for models that require sensors. Stainless steel inlet pipe , INCLUDED ITEMS: , One slip on silencer. Two 51-55mm band clamps. Five M8 washers. Two 55mm aluminum spacers. One 20mm aluminum spacers. Two M8 x 80mm cap head bolts. Two M8 x 40mm cap head bolts. Two M8 x 20mm cap head bolts. One bracket. One M12 copper washer. One M12 x 25mm bolt. One H type silencer strap. One protective rubber for silencer strap. Two connecting pipe. One instruction sheet. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. HA79
3 on Hand
More Info/Options for Scorpion Oval Slip-On Muffler with Polished Stainless Steel Muffler Sleeve 4400626
|
|
|
|
$415.95
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4402721
Dennis Kirk Part #: 4402721
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4402721: Mid-length designed pipes built for sound and to accentuate the rear portion of the bike. Outer pipe measures 2 1/2 inch in diameter; inner pipe is 1 3/4 inch diameter. End Cap/Hard Tips only fit Hard-Krome pipes w/Hardtips. Baffle is not removable. Customize with optional CNC-machined tapered (order 44-8258) or slash-cut (order 44-8255) or straight-cut (44-8252), , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing..
1 on Hand
More Info/Options for Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4402721
|
|
|
|
$415.95
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 449155
Dennis Kirk Part #: 449155
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 449155: Manufacturer part # 381-4010 - Mid-length designed pipes built for sound and to accentuate the rear portion of the bike. Outer pipe measures 2 1/2 in. diameter; inner pipe is 1 3/4 in. diameter. Will accept Hard-Tips billet end caps. Baffle is not removable. Customize with optional CNC-machined end caps:, Taper Style - 44-9166, Slash-Cut - 44-9165, Straight-Cut - 44-9164. Polished chrome finish, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 381-4010
Expected Soon
More Info/Options for Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 449155
|
|
|
|
$415.95
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4402788
Dennis Kirk Part #: 4402788
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4402788: Mid-length designed pipes built for sound and to accentuate the rear portion of the bike. Outer pipe measures 2 1/2 inch in diameter; inner pipe is 1 3/4 inch diameter. End Cap/Hard Tips only fit Hard-Krome pipes w/Hardtips. Baffle is not removable. Customize with optional CNC-machined tapered (order 44-8258) or slash-cut (order 44-8255) or straight-cut (44-8252), , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing..
1 on Hand
More Info/Options for Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4402788
|
|
|
|
$415.95
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 449751
Dennis Kirk Part #: 449751
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 449751: Manufacturer part # 381-6050 - Mid-length designed pipes built for sound and to accentuate the rear portion of the bike. Outer pipe measures 2 1/2 in. diameter; inner pipe is 1 3/4 in. diameter. Will accept Hard-Tips billet end caps. Baffle is not removable. Customize with optional CNC-machined end caps:, Taper Style - 44-9166, Slash-Cut - 44-9165, Straight-Cut - 44-9164. Polished chrome finish, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 381-6050
3 on Hand
More Info/Options for Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 449751
|
|
|
|
$415.95
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4400349
Dennis Kirk Part #: 4400349
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4400349: Manufacturer part # 381-6010 - Mid-length designed pipes built for sound and to accentuate the rear portion of the bike. Outer pipe measures 2 1/2 in. diameter; inner pipe is 1 3/4 in. diameter. Will accept Hard-Tips billet end caps. Baffle is not removable. Customize with optional CNC-machined end caps:, Taper Style - 44-9166, Slash-Cut - 44-9165, Straight-Cut - 44-9164. Polished chrome finish, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 381-6010
1 on Hand
More Info/Options for Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4400349
|
|
|
|
|
|
$415.95
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4402725
Dennis Kirk Part #: 4402725
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4402725: Mid-length designed pipes built for sound and to accentuate the rear portion of the bike. Outer pipe measures 2 1/2 inch in diameter; inner pipe is 1 3/4 inch diameter. End Cap/Hard Tips only fit Hard-Krome pipes w/Hardtips. Baffle is not removable. Customize with optional CNC-machined tapered (order 44-8258) or slash-cut (order 44-8255) or straight-cut (44-8252), , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing..
1 on Hand
More Info/Options for Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4402725
|
|
|
|
$415.95
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4400346
Dennis Kirk Part #: 4400346
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4400346: Manufacturer part # 381-2030 - Mid-length designed pipes built for sound and to accentuate the rear portion of the bike. Outer pipe measures 2 1/2 in. diameter; inner pipe is 1 3/4 in. diameter. Will accept Hard-Tips billet end caps. Baffle is not removable. Customize with optional CNC-machined end caps:, Taper Style - 44-9166, Slash-Cut - 44-9165, Straight-Cut - 44-9164. Polished chrome finish, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 381-2030
1 on Hand
More Info/Options for Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4400346
|
|
|
|
$415.95
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 449744
Dennis Kirk Part #: 449744
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 449744: Manufacturer part # 381-6020 - Mid-length designed pipes built for sound and to accentuate the rear portion of the bike. Outer pipe measures 2 1/2 in. diameter; inner pipe is 1 3/4 in. diameter. Will accept Hard-Tips billet end caps. Baffle is not removable. Customize with optional CNC-machined end caps:, Taper Style - 44-9166, Slash-Cut - 44-9165, Straight-Cut - 44-9164. Polished chrome finish, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 381-6020
1 on Hand
More Info/Options for Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 449744
|
|
|
|
$415.95
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4402723
Dennis Kirk Part #: 4402723
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4402723: Mid-length designed pipes built for sound and to accentuate the rear portion of the bike. Outer pipe measures 2 1/2 inch in diameter; inner pipe is 1 3/4 inch diameter. End Cap/Hard Tips only fit Hard-Krome pipes w/Hardtips. Baffle is not removable. Customize with optional CNC-machined tapered (order 44-8258) or slash-cut (order 44-8255) or straight-cut (44-8252), , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing..
1 on Hand
More Info/Options for Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4402723
|
|
|
|
$415.95
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 449406
Dennis Kirk Part #: 449406
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 449406: Manufacturer part # 381-2035 - Mid-length designed pipes built for sound and to accentuate the rear portion of the bike. Outer pipe measures 2 1/2 in. diameter; inner pipe is 1 3/4 in. diameter. Will accept Hard-Tips billet end caps. Baffle is not removable. Customize with optional CNC-machined end caps:, Taper Style - 44-9166, Slash-Cut - 44-9165, Straight-Cut - 44-9164. Polished chrome finish, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 381-2035
1 on Hand
More Info/Options for Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 449406
|
|
|
|
$415.95
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4401649
Dennis Kirk Part #: 4401649
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4401649: Manufacturer part # 381-8025 - Mid-length designed pipes built for sound and to accentuate the rear portion of the bike. Outer pipe measures 2 1/2 in. diameter; inner pipe is 1 3/4 in. diameter. Will accept Hard-Tips billet end caps. Baffle is not removable. Customize with optional CNC-machined end caps:, Taper Style - 44-9166, Slash-Cut - 44-9165, Straight-Cut - 44-9164. Polished chrome finish, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 381-8025
1 on Hand
More Info/Options for Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4401649
|
|
|
|
$415.95
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4402718
Dennis Kirk Part #: 4402718
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4402718: Mid-length designed pipes built for sound and to accentuate the rear portion of the bike. Outer pipe measures 2 1/2 inch in diameter; inner pipe is 1 3/4 inch diameter. End Cap/Hard Tips only fit Hard-Krome pipes w/Hardtips. Baffle is not removable. Customize with optional CNC-machined tapered (order 44-8258) or slash-cut (order 44-8255) or straight-cut (44-8252), , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing..
2 on Hand
More Info/Options for Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4402718
|
|
|
|
$415.95
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4401644
Dennis Kirk Part #: 4401644
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4401644: Manufacturer part # 381-4025 - Mid-length designed pipes built for sound and to accentuate the rear portion of the bike. Outer pipe measures 2 1/2 in. diameter; inner pipe is 1 3/4 in. diameter. Will accept Hard-Tips billet end caps. Baffle is not removable. Customize with optional CNC-machined end caps:, Taper Style - 44-9166, Slash-Cut - 44-9165, Straight-Cut - 44-9164. Polished chrome finish, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 381-4025
1 on Hand
More Info/Options for Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4401644
|
|
|
|
$415.95
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4402800
Dennis Kirk Part #: 4402800
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4402800: Mid-length designed pipes built for sound and to accentuate the rear portion of the bike. Outer pipe measures 2 1/2 inch in diameter; inner pipe is 1 3/4 inch diameter. End Cap/Hard Tips only fit Hard-Krome pipes w/Hardtips. Baffle is not removable. Customize with optional CNC-machined tapered (order 44-8258) or slash-cut (order 44-8255) or straight-cut (44-8252), , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing..
Expected Soon
More Info/Options for Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4402800
|
|
|
|
$415.95
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 449742
Dennis Kirk Part #: 449742
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 449742: Manufacturer part # 381-8010 - Mid-length designed pipes built for sound and to accentuate the rear portion of the bike. Outer pipe measures 2 1/2 in. diameter; inner pipe is 1 3/4 in. diameter. Will accept Hard-Tips billet end caps. Baffle is not removable. Customize with optional CNC-machined end caps:, Taper Style - 44-9166, Slash-Cut - 44-9165, Straight-Cut - 44-9164. Polished chrome finish, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 381-8010
1 on Hand
More Info/Options for Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 449742
|
|
|
|
$415.95
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4402716
Dennis Kirk Part #: 4402716
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4402716: Mid-length designed pipes built for sound and to accentuate the rear portion of the bike. Outer pipe measures 2 1/2 inch in diameter; inner pipe is 1 3/4 inch diameter. End Cap/Hard Tips only fit Hard-Krome pipes w/Hardtips. Baffle is not removable. Customize with optional CNC-machined tapered (order 44-8258) or slash-cut (order 44-8255) or straight-cut (44-8252), , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing..
Expected Soon
More Info/Options for Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 4402716
|
|
|
|
$415.95
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 449752
Dennis Kirk Part #: 449752
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System 449752: Manufacturer part # 381-6060 - Mid-length designed pipes built for sound and to accentuate the rear portion of the bike. Outer pipe measures 2 1/2 in. diameter; inner pipe is 1 3/4 in. diameter. Will accept Hard-Tips billet end caps. Baffle is not removable. Customize with optional CNC-machined end caps:, Taper Style - 44-9166, Slash-Cut - 44-9165, Straight-Cut - 44-9164. Polished chrome finish, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 381-6060
| |
