TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Vance & Hines SS2-R 4-into-1 Exhaust System W

$449.95 Bikeman Billet Head Kit BMPBHK-4 $449.95 Manufacturer: Bikeman Dennis Kirk Part #: 140566 Bikeman Billet Head Kit: Manufacturer part # BMPBHK-4 - The Bikeman Performance billet head kits give you the best of both worlds with excellent horsepower gains and better cooling capacity. Billet head kits utilize an improved squish band, new pocket design and slightly more compression for pump gas friendly horsepower. Most models easily gain 4-5 peak horsepower and as much as 10 midrange horsepower all while keeping the motor running cooler. Most kits include two billet domes, a billet head cover, coolant elbow, o-rings and instructions. , , NOTE: For use in low elevation. BMPBHK-4 Expected Soon More Info/Options for Bikeman Billet Head Kit BMPBHK-4

$449.95 Shift Octane Jacket 70082 3567074M $449.95 Manufacturer: Shift Dennis Kirk Part #: 3567074M Shift Octane Jacket: Manufacturer part # 70082 - DennisKirk Part # 3567074M - Made from 1.2-1.4mm premium grain leather. Adjustable and removable CE-approved shoulder and elbow armor. Leather accordion panels in key flex areas for unrestricted movement. Perforated premium leather panels with additional air intake vents. Stretch Kevlar lower arm panels for added comfort and protection. Additional back padding for added protection. Removable, insulated full-sleeve liner.. 70082 1 on hand More Info/Options for Shift Octane Jacket 70082 3567074M

$449.95 Vance & Hines SS2-R 4-into-1 Exhaust System W/Chrome Header Pipe & Polished Aluminum Oval Muffler Sleeve 13529 $449.95 Manufacturer: Vance & Hines Dennis Kirk Part #: 443975 Vance & Hines SS2-R 4-into-1 Exhaust System W/Chrome Header Pipe & Polished Aluminum Oval Muffler Sleeve: Manufacturer part # 13529 - Designed to meet the demands of todays sportbike rider with increased performance and a responsible sound level. The ultimate in performance, finish and fit, for hassle-free installation. Three-piece design features quick-release, spring mounted canister and middle section. Large diameter, smooth-bend headpipes for maximum exhaust flow. Polished, hard nickel plating on all headers and middle pipes fights corrosion and rust. Unique high-volume oval design canisters are available in highly polished aluminum. An effective triple-chambered baffling system cancels noise waves, not the power pulses. All baffles are removable and re-packable. Billet, machined aluminum end caps. Some carburetor re-jetting may be required for optimum performance, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 13529 1 on hand More Info/Options for Vance & Hines SS2-R 4-into-1 Exhaust System W/Chrome Header Pipe & Polished Aluminum Oval Muffler Sleeve 13529

$449.95 Shift Octane Jacket 70082 3567074XL $449.95 Manufacturer: Shift Dennis Kirk Part #: 3567074XL Shift Octane Jacket: Manufacturer part # 70082 - DennisKirk Part # 3567074XL - Made from 1.2-1.4mm premium grain leather. Adjustable and removable CE-approved shoulder and elbow armor. Leather accordion panels in key flex areas for unrestricted movement. Perforated premium leather panels with additional air intake vents. Stretch Kevlar lower arm panels for added comfort and protection. Additional back padding for added protection. Removable, insulated full-sleeve liner.. 70082 1 on hand More Info/Options for Shift Octane Jacket 70082 3567074XL

$449.95 Shift Octane Jacket 70082 3567074XXL $449.95 Manufacturer: Shift Dennis Kirk Part #: 3567074XXL Shift Octane Jacket: Manufacturer part # 70082 - DennisKirk Part # 3567074XXL - Made from 1.2-1.4mm premium grain leather. Adjustable and removable CE-approved shoulder and elbow armor. Leather accordion panels in key flex areas for unrestricted movement. Perforated premium leather panels with additional air intake vents. Stretch Kevlar lower arm panels for added comfort and protection. Additional back padding for added protection. Removable, insulated full-sleeve liner.. 70082 1 on hand More Info/Options for Shift Octane Jacket 70082 3567074XXL

$449.95 Shift Octane Jacket 70082 3567075XXL $449.95 Manufacturer: Shift Dennis Kirk Part #: 3567075XXL Shift Octane Jacket: Manufacturer part # 70082 - DennisKirk Part # 3567075XXL - Made from 1.2-1.4mm premium grain leather. Adjustable and removable CE-approved shoulder and elbow armor. Leather accordion panels in key flex areas for unrestricted movement. Perforated premium leather panels with additional air intake vents. Stretch Kevlar lower arm panels for added comfort and protection. Additional back padding for added protection. Removable, insulated full-sleeve liner.. 70082 1 on hand More Info/Options for Shift Octane Jacket 70082 3567075XXL

$448.99 Edelbrock Thumb Throttle Carb Kit 3004 $448.99 Manufacturer: Edelbrock Dennis Kirk Part #: 16485 Edelbrock Thumb Throttle Carb Kit: Manufacturer part # 3004 - Pumper-style carburetor designed exclusively for ATVs; more horsepower and more reliability. Flat slide with single fuel circuit for easy external adjustment; no jets to replace. Features internal fuel cell and anti-slosh plate in fuel bowl for steady fuel delivery. Mounts directly and easily to stock manifold. For twist throttle or thumb throttle. throttle and cable included. NOTE: Thumb throttle are not included in this, must reuse the OEM thumb throttle. 3004 1 on hand More Info/Options for Edelbrock Thumb Throttle Carb Kit 3004

$448.99 Vance & Hines SS2-R 4-into-1 Exhaust System W/Chrome Header Pipe & Polished Aluminum Oval Muffler Sleeve 12534 $448.99 Manufacturer: Vance & Hines Dennis Kirk Part #: 442750 Vance & Hines SS2-R 4-into-1 Exhaust System W/Chrome Header Pipe & Polished Aluminum Oval Muffler Sleeve: Manufacturer part # 12534 - Designed to meet the demands of todays sportbike rider with increased performance and a responsible sound level. The ultimate in performance, finish and fit, for hassle-free installation. Three-piece design features quick-release, spring mounted canister and middle section. Large diameter, smooth-bend headpipes for maximum exhaust flow. Polished, hard nickel plating on all headers and middle pipes fights corrosion and rust. Unique high-volume oval design canisters are available in highly polished aluminum. An effective triple-chambered baffling system cancels noise waves, not the power pulses. All baffles are removable and re-packable. Billet, machined aluminum end caps. Some carburetor re-jetting may be required for optimum performance, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 12534 1 on hand More Info/Options for Vance & Hines SS2-R 4-into-1 Exhaust System W/Chrome Header Pipe & Polished Aluminum Oval Muffler Sleeve 12534

$448.99 Vance & Hines SS2-R 4-into-1 Exhaust System W/Chrome Header Pipe & Polished Aluminum Oval Muffler Sleeve 12535 $448.99 Manufacturer: Vance & Hines Dennis Kirk Part #: 443592 Vance & Hines SS2-R 4-into-1 Exhaust System W/Chrome Header Pipe & Polished Aluminum Oval Muffler Sleeve: Manufacturer part # 12535 - Designed to meet the demands of todays sportbike rider with increased performance and a responsible sound level. The ultimate in performance, finish and fit, for hassle-free installation. Three-piece design features quick-release, spring mounted canister and middle section. Large diameter, smooth-bend headpipes for maximum exhaust flow. Polished, hard nickel plating on all headers and middle pipes fights corrosion and rust. Unique high-volume oval design canisters are available in highly polished aluminum. An effective triple-chambered baffling system cancels noise waves, not the power pulses. All baffles are removable and re-packable. Billet, machined aluminum end caps Some carburetor re-jetting may be required for optimum performance, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 12535 2 on hand More Info/Options for Vance & Hines SS2-R 4-into-1 Exhaust System W/Chrome Header Pipe & Polished Aluminum Oval Muffler Sleeve 12535

$448.99 Vance & Hines Staightshots HS 16815 $448.99 Manufacturer: Vance & Hines Dennis Kirk Part #: H44083 Vance & Hines Staightshots HS: Manufacturer part # 16815 - Another innovation from Vance & Hines. Big 2 1/2" full-coverage, non-blueing header and muffler heat shields. Get that classic Vance & Hines hot-rod sound - mean & nasty. Removable baffles. Mounting hardware included. Made in the U.S.A.. NOTES: ,. Will not accept Hot Tips, ,. There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc, and is not caused by defective manufacturing. See lubrication products to help prevent or remove blueing ,. For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 16815 Expected Soon More Info/Options for Vance & Hines Staightshots HS 16815

$448.99 Vance & Hines SS2-R 4-into-1 Exhaust System W/Chrome Header Pipe & Polished Aluminum Ovan Muffler Sleeve 12518 $448.99 Manufacturer: Vance & Hines Dennis Kirk Part #: 440424 Vance & Hines SS2-R 4-into-1 Exhaust System W/Chrome Header Pipe & Polished Aluminum Ovan Muffler Sleeve: Manufacturer part # 12518 - Designed to meet the demands of todays sportbike rider with increased performance and a responsible sound level. The ultimate in performance, finish and fit, for hassle-free installation. Three-piece design features quick-release, spring mounted canister and middle section. Large diameter, smooth-bend headpipes for maximum exhaust flow. Polished, hard nickel plating on all headers and middle pipes fights corrosion and rust. Unique high-volume oval design canisters are available in highly polished aluminum. An effective triple-chambered baffling system cancels noise waves, not the power pulses. All baffles are removable and re-packable. Billet, machined aluminum end caps. Some carburetor re-jetting may be required for optimum performance. This system utilizes exhaust spigots and a quick-release, spring attached header, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 12518 1 on hand More Info/Options for Vance & Hines SS2-R 4-into-1 Exhaust System W/Chrome Header Pipe & Polished Aluminum Ovan Muffler Sleeve 12518

$447.99 MC Enterprises Driver Floorboard 2971 $447.99 Manufacturer: MC Enterprises Dennis Kirk Part #: 49361 MC Enterprises Driver Floorboard: Manufacturer part # 2971 - Polished aluminum boards for Gold Wing. Aspencades and Interstates retain stock engine guards or use our 50-566 wraparound case guard (see index). Heavy-duty construction, heli-arc welding and triple chrome-plating on all steel parts. Blend with stock polished items on the bike and feature non-slip diamond-patterned rubber foot pad. Includes a custom-polished aluminum heel/toe shifter and large rubber brake pad. , NOTE: Dimensions: 10 3/4 in. L x 4 1/2 in. W. 2971 1 on hand More Info/Options for MC Enterprises Driver Floorboard 2971

$447.99 MC Enterprises Driver Floorboard 30013 $447.99 Manufacturer: MC Enterprises Dennis Kirk Part #: 49772 MC Enterprises Driver Floorboard: Manufacturer part # 30013 - Add style and comfort for long road trips. Floorboards feature a rubber insert. Quick and easy bolt-on installation. All except Honda ACE include heel/toe shifters. Polished cast aluminum.. 30013 1 on hand More Info/Options for MC Enterprises Driver Floorboard 30013

$447.99 Wiseco Piston Kit- 3 Cylinder SK1239 $447.99 Manufacturer: Wiseco Dennis Kirk Part #: SK1239 Wiseco Piston Kit- 3 Cylinder: Manufacturer part # SK1239 - Wisecos pistons are the perfect fit between technology and performance. Extensive R and D test programs and advanced manufacturing techniques add up to performance and proven dependability. With a squeeze of the throttle you will experience the acceleration and torque that puts you in the lead while others can only follow. Sold complete with matched and balanced pistons, rings, wrist pins, circlips and top end gasket kit.. SK1239 Expected Soon More Info/Options for Wiseco Piston Kit- 3 Cylinder SK1239

$447.99 Vance & Hines Big Shots 18309 $447.99 Manufacturer: Vance & Hines Dennis Kirk Part #: 449074 Vance & Hines Big Shots: Manufacturer part # 18309 - After extensive R&D and dyno testing, Vance & Hines developed the new Big Shots performance exhaust system. Replaces the excessive bulk and weight of the stock system. Dramatically increase horsepower and torque. Supplied with the Vance and Hines Power Chamber, a unique crossover system that offers all the performance advantages of a 2-into-1 race system. Mammoth 2 1/2 in. full-coverage heat shields. Removable baffles and racy billet end tips. Virtually blue-proof. Complete mounting hardware with easy-to-understand installation instructions. For maximum performance, a Vance and Hines Power Commander is recommended, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture. Please consult the exhaust manufacturer directly with questions regarding any modifications that may be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore is not covered ny any warranty. See Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 18309 1 on hand More Info/Options for Vance & Hines Big Shots 18309

$447.99 Wiseco Piston Kit- 3 Cylinder SK1240 $447.99 Manufacturer: Wiseco Dennis Kirk Part #: SK1240 Wiseco Piston Kit- 3 Cylinder: Manufacturer part # SK1240 - Wisecos pistons are the perfect fit between technology and performance. Extensive R and D test programs and advanced manufacturing techniques add up to performance and proven dependability. With a squeeze of the throttle you will experience the acceleration and torque that puts you in the lead while others can only follow. Sold complete with matched and balanced pistons, rings, wrist pins, circlips and top end gasket kit.. SK1240 Expected Soon More Info/Options for Wiseco Piston Kit- 3 Cylinder SK1240

$447.99 Leo Vince SBK Stainless Oval Slip-On With Titanium Muffler Sleeve 7268 $447.99 Manufacturer: Leo Vince Dennis Kirk Part #: 4400912 Leo Vince SBK Stainless Oval Slip-On With Titanium Muffler Sleeve: Manufacturer part # 7268 - Specifically designed to boost torque and horsepower across the rpm range while producing a rich exhaust note. Slip-ons feature stainless steel mid-pipe. TIG-welded stainless steel AISI 304 muffler body and fittings. Satin-finish titanium muffler sleeve. Include aluminum alloy mounting strap and frame attachment brackets. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 7268