TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Yoshimura RS-3 Oval Race Slip-On Muffler with Glossy Carbon Fiber Muffler Sleeve 1125252

$456.99 Hinson Inner Clutch Hub/Pressure Plate Kit H238 $456.99 Manufacturer: Hinson Dennis Kirk Part #: 382886 Hinson Inner Clutch Hub/Pressure Plate Kit: Manufacturer part # H238 - Allows use of eight fiber and seven steel plates (recommended plates use only). With the use of Hinson Clutch Components clutch baskets there is a lighter clutch lever pull and increased clutch life and performance. Creates less heat by allowing clutch to spin more true. Precision machined from billet T-6 aircraft-quality aluminum to aerospace tolerances and Akadized for five times the wear resistance of stock components. NOTE: Does not inlcude the Fiber Plate, Steel Plate, Springs or Bolt. H238 1 on hand More Info/Options for Hinson Inner Clutch Hub/Pressure Plate Kit H238

$456.99 Works Performance 12.6 in. Shock Absorber pH58700 $456.99 Manufacturer: Works Performance Dennis Kirk Part #: H58700 Works Performance 12.6 in. Shock Absorber: Manufacturer part # pH58700 - Features hard chrome high tensile 1/2 in. steel shafts and billet aluminum components with computer calibrated check ball, spring and orifice damping system. Chromed steel hydraulic tube with 1 3/8 in. damping piston and billet aluminum end caps. Select units feature the ARS (adjustable rate suspension) which allows the rider to increase or decrease the load carrying capacity of the shocks up to 50 percent without changing the preload of the springs. , Note: This item ships in 3-4 days after the order is placed.. pH58700 1 on hand More Info/Options for Works Performance 12.6 in. Shock Absorber pH58700

$456.99 Hinson Inner Clutch Hub/Pressure Plate Kit H281 $456.99 Manufacturer: Hinson Dennis Kirk Part #: 383375 Hinson Inner Clutch Hub/Pressure Plate Kit: Manufacturer part # H281 - Made from billet T-6 aluminum and hard coated. Five times the wear resistance of stock. Flexing and heat build-up stopped by rigid pressure plates. Clutch pull eased on most machines. Include button-type screws to mount the stock ring gear; baskets for Yamaha Banshee include clutch cushions. Race-proven by Team Honda, Team Suzuki and Team Pro Circuit.. H281 2 on hand More Info/Options for Hinson Inner Clutch Hub/Pressure Plate Kit H281

$456.99 Works Performance 11.5 in. Shock Absorber pH58701 $456.99 Manufacturer: Works Performance Dennis Kirk Part #: H58701 Works Performance 11.5 in. Shock Absorber: Manufacturer part # pH58701 - Features hard chrome high tensile 1/2 in. steel shafts and billet aluminum components with computer calibrated check ball, spring and orifice damping system. Chromed steel hydraulic tube with 1 3/8 in. damping piston and billet aluminum end caps. Select units feature the ARS (adjustable rate suspension) which allows the rider to increase or decrease the load carrying capacity of the shocks up to 50% without changing the preload of the springs. , Note: This item ships in 3-4 days after the order is placed.. pH58701 1 on hand More Info/Options for Works Performance 11.5 in. Shock Absorber pH58701

$456.99 Saddlemen Solo Seat with Driver Backrest 08100349 $456.99 Manufacturer: Saddlemen Dennis Kirk Part #: 454575 Saddlemen Solo Seat with Driver Backrest: Manufacturer part # 08100349 - Touring style solo seats that are wide and low for superior style and comfort. Feature removable/adjustable driver's backrest; vertical adjustments are made via a spring detent in the backrest bar and horizontal adjustments (fore-aft) are made with a thumbscrew. For additional comfort, both seats and pillions feature SaddleGel . Driver and passenger seats sold separately. Most models available in supple SaddleHyde or genuine leather cover in choice of plain or studded. Low sport profile or wide touring pillion styles available to match passenger or styling preferences.. , Dimensions: , Overall Length: 20 in., Drivers Seat: , Length: 18-1/4 in., Width: 15-1/2 in., Backrest Height: 6 in., , NOTE: This is a LoBoy style seat (lowers driver approx. 1-1/2 in.). 08100349 1 on hand More Info/Options for Saddlemen Solo Seat with Driver Backrest 08100349

$456.99 Arlen Ness Custom Handlebar Controls w/ 5/8 in. Master Cylinders 08-534 $456.99 Manufacturer: Arlen Ness Dennis Kirk Part #: H5735 Arlen Ness Custom Handlebar Controls w/ 5/8 in. Master Cylinders: Manufacturer part # 08-534 - Made for the rider that wants a clean handlebar with no switches. CNC-machined and brilliantly chrome plated. Choose from handlebars with 5/8 in. or 3/4 in. (H5738) master cylinders with mechanical clutch controls. Made in the U.S.A.. Throttle and grips not included.. 08-534 1 on hand More Info/Options for Arlen Ness Custom Handlebar Controls w/ 5/8 in. Master Cylinders 08-534

$456.99 Hinson Inner Clutch Hub/Pressure Plate Kit H267 $456.99 Manufacturer: Hinson Dennis Kirk Part #: 383088 Hinson Inner Clutch Hub/Pressure Plate Kit: Manufacturer part # H267 - Made from billet T-6 aluminum and hard coated. Five times the wear resistance of stock. Flexing and heat build-up stopped by rigid pressure plates. Clutch pull eased on most machines. Include button-type screws to mount the stock ring gear; baskets for Yamaha Banshee include clutch cushions. Race-proven by Team Honda, Team Suzuki and Team Pro Circuit.. H267 1 on hand More Info/Options for Hinson Inner Clutch Hub/Pressure Plate Kit H267

$456.99 Arlen Ness Custom Handlebar Controls w/ 3/4 in. Master Cylinder 08-536 $456.99 Manufacturer: Arlen Ness Dennis Kirk Part #: H5738 Arlen Ness Custom Handlebar Controls w/ 3/4 in. Master Cylinder: Manufacturer part # 08-536 - Made for the rider that wants a clean handlebar with no switches. CNC-machined and brilliantly chrome plated. Choose from handlebars with 5/8 in. (H5735) or 3/4 in. master cylinders with mechanical clutch controls. Made in the U.S.A.. Throttle and grips not included.. 08-536 1 on hand More Info/Options for Arlen Ness Custom Handlebar Controls w/ 3/4 in. Master Cylinder 08-536

$456.99 Edelbrock Qwiksilver Twist Throttle Carb Kit 3103 $456.99 Manufacturer: Edelbrock Dennis Kirk Part #: 165099 Edelbrock Qwiksilver Twist Throttle Carb Kit: Manufacturer part # 3103 - Pumper-style carburetor designed exclusively for ATVs; more horsepower and more reliability. Flat slide with single fuel circuit for easy external adjustment; no jets to replace. Features internal fuel cell and anti-slosh plate in fuel bowl for steady fuel delivery. Mounts directly and easily to stock manifold. For twist throttle only; twist throttle and cable included. For replacement cable order 19-5799. 3103 1 on hand More Info/Options for Edelbrock Qwiksilver Twist Throttle Carb Kit 3103

$456.99 Hinson Inner Clutch Hub/Pressure Plate Kit H223 $456.99 Manufacturer: Hinson Dennis Kirk Part #: 382526 Hinson Inner Clutch Hub/Pressure Plate Kit: Manufacturer part # H223 - Allows use of eight fiber and seven steel plates (recommended plates use only). With the use of Hinson Clutch Components clutch baskets there is a lighter clutch lever pull and increased clutch life and performance. Creates less heat by allowing clutch to spin more true. Precision machined from billet T-6 aircraft-quality aluminum to aerospace tolerances and Akadized for five times the wear resistance of stock components. NOTE: Does not inlcude the Fiber Plate, Steel Plate, Springs or Bolt. H223 1 on hand More Info/Options for Hinson Inner Clutch Hub/Pressure Plate Kit H223

$455.99 Yoshimura RS-3 Oval Race Bolt-On Muffler with Glossy Carbon Fiber Muffler Sleeve 1491252 $455.99 Manufacturer: Yoshimura Dennis Kirk Part #: 447880 Yoshimura RS-3 Oval Race Bolt-On Muffler with Glossy Carbon Fiber Muffler Sleeve: Manufacturer part # 1491252 - A convenient bolt-on design featuring Yoshimura's racing technology. Baffles are stainless steel 2 in. or 2.25 in. dia. race style. Carbon fiber exhaust canisters. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1491252 1 on hand More Info/Options for Yoshimura RS-3 Oval Race Bolt-On Muffler with Glossy Carbon Fiber Muffler Sleeve 1491252

$455.99 Leo Vince SBK EVO II Titanium Slip-On Mufflers 7553 $455.99 Manufacturer: Leo Vince Dennis Kirk Part #: 4402078 Leo Vince SBK EVO II Titanium Slip-On Mufflers: Manufacturer part # 7553 - The same quality and performance as Leo Vince's racing mufflers but with a more streetable exhaust note. Removable noise reducer in muffler outlet keeps sound down without restricting performance. Slip-on mufflers feature stainless steel mid-pipe. Muffler body and fittings are TIG-welded stainless steel AISI 304. Brushed aluminum or satin-finish titanium muffler bodies available. Mounting strap and frame attachment brackets are aluminum alloy. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 7553 1 on hand More Info/Options for Leo Vince SBK EVO II Titanium Slip-On Mufflers 7553

$455.99 Works Performance 12 in. Dual-Rate Chrome Spring Shock Absorber p582403 $455.99 Manufacturer: Works Performance Dennis Kirk Part #: 582403 Works Performance 12 in. Dual-Rate Chrome Spring Shock Absorber: Manufacturer part # p582403 - High tensile 1/2 in. steel shafts with billet aluminum components. Computer-calibrated check ball, spring and orifice damping system for precise performance. Hydraulic tubes are chromed steel with 1 3/8 in. damping piston and billet aluminum end caps. 1.6 in. lower than stock. , Note: This item ships in 3-4 days after the order is placed.. p582403 1 on hand More Info/Options for Works Performance 12 in. Dual-Rate Chrome Spring Shock Absorber p582403

$455.99 Leo Vince SBK Oval EVO II Stainless Slip-On with Carbon Muffler Sleeve 7968 $455.99 Manufacturer: Leo Vince Dennis Kirk Part #: 4402923 Leo Vince SBK Oval EVO II Stainless Slip-On with Carbon Muffler Sleeve: Manufacturer part # 7968 - Low-decibel exhaust note -- without sacrificing performance. Slip-on mufflers feature stainless steel mid-pipe. TIG-welded stainless steel AISI 304 muffler body and fittings. Brushed aluminum muffler bodies. Aluminum alloy mounting strap and frame attachment brackets, , Included Items: , 1. (1) Silencer, 2. (1) Mid-Pipe, 3. (1) Spring, 4. (1) 8mm-1.25 x 60mm Allen Head Bolt, 5. (1) 8mm-1.25 Nut, 6. (1) 8mm x 3/4" Spacer, 7. (1) Exhaust Hanger, , Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 7968 1 on hand More Info/Options for Leo Vince SBK Oval EVO II Stainless Slip-On with Carbon Muffler Sleeve 7968

$455.99 Leo Vince MotoGP Slip-On Stainless Steel Mufflers 7969 $455.99 Manufacturer: Leo Vince Dennis Kirk Part #: 4402924 Leo Vince MotoGP Slip-On Stainless Steel Mufflers: Manufacturer part # 7969 - Leo Vince's experience with top teams from MotoGP went into the look and performance of these mufflers. Significant power and torque increases. TIG-welded AISI 304 stainless steel silencer and connectors are sandblasted with stainless steel particles for a "factory" finish. Muffler outlet features a removable noise reducer that reduces sound without restricting performance. Mount to the frame with carbon fiber brackets. Stainless steel cat eliminator pipe (available separately) eliminates the OEM catalytic converter for track days or racing (link pipe may only be used with Leo Vince mufflers, not for use with stock mufflers); not intended for street use; include hardware to remove stock exhaust valve and to override OEM fuel-injection sensor, , Included Items: , (1) Silencer, (1) Mid-pipe, (1) Mounting Bracket, (2) 6mm-1.00 x 16 Flange Head Bolts, (1) 8mm-1.25mm x 50mm Socket Head Bolt, (1) 8mm-1.25 Flange Nut, (1) Exhaust Spring, (1) Gasket, (3) Spacer Bushings, (1) Spring Puller, , NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. 7969 1 on hand More Info/Options for Leo Vince MotoGP Slip-On Stainless Steel Mufflers 7969

$455.99 Custom Chrome Wide Glide Conversion Kit 13040 $455.99 Manufacturer: Custom Chrome Dennis Kirk Part #: H59059 Custom Chrome Wide Glide Conversion Kit: Manufacturer part # 13040 - Convert your 35mm or 39mm Showa front end to the Wide Glide look - everything you need is right here. Use with front fender (part number H39-0613) to get a Heritage-type look with 19" or 21" wheels. Complete kits includes: Chrome-forged triple tree set, lower clamp cover, chrome headlight mount and fork tube plugs and fork stop, chrome stem nut, chrome axle and axle spacer, chrome fender spacers and all necessary hardware. Kits for bikes between 84-99 include one rotor spacer and one right side hubcap; for dual-disc replacement parts for the spacers found in these kits, but also 78-83 dual-disc models with 35mm and 39mm forks. , , CONVERSION KITS. , Sportster adn FXR 84-87 (excpet FXLR 87) with single disc and 35mm forks PART NUMBER H59-057 (Kit raises front end about 1 1/2", May require fork tube plugs part number H59-060). , , Sportster and FXR 87-99 (except FXLR) with single disc and 39mm forks PART NUMBER H59-058 (Kit raises front end by about 1 1/2"). , , FX 77-83 with dual discs PART NUMBER H59-059 (Kit raises front end by about 1 1/2". , , DISC HUB SPACER KITS. , Fits conversion kit H59-058, 39mm Showa forks on 87-99 models, PART NUMBER H55-05. , , Fit conversion kit H59-057, 35mm forks on 84-87 models, PART NUMBER H55-06. , , Fits conversion kit H59-059, 35mm Showa forks on 77-83 dual disc models PART NUMBER H55-07. 13040 1 on hand More Info/Options for Custom Chrome Wide Glide Conversion Kit 13040

$455.99 Yoshimura RS-3 Oval Race Slip-On Muffler with Glossy Carbon Fiber Muffler Sleeve YZ606SO2 $455.99 Manufacturer: Yoshimura Dennis Kirk Part #: 430596 Yoshimura RS-3 Oval Race Slip-On Muffler with Glossy Carbon Fiber Muffler Sleeve: Manufacturer part # YZ606SO2 - A convenient slip-on design featuring Yoshimura's racing technology. Tailpipe is 20-gauge stainless steel to reduce weight and boost power. Baffles are stainless steel 2 in. or 2.25 in. diameter race style. Glossy carbon fiber quick-release exhaust canisters. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. YZ606SO2