TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Shoei X-Eleven Kiyonari Helmet 02-138

$470.00 Icon Vintage Flattrack Jacket p3410718 3410718M $470.00 Manufacturer: Icon Dennis Kirk Part #: 3410718M Icon Vintage Flattrack Jacket: Manufacturer part # p3410718 - DennisKirk Part # 3410718M - Heavy-duty 1.2-1.4mm leather construction. Vintage leather treatment. Vintage flattrack graphics. CE-approved armor in elbows and shoulders. Zippered cooling vents. Insulated liner is removable.. p3410718 1 on hand More Info/Options for Icon Vintage Flattrack Jacket p3410718 3410718M

$470.00 Icon Vintage Flattrack Jacket p3410718 3410718S $470.00 Manufacturer: Icon Dennis Kirk Part #: 3410718S Icon Vintage Flattrack Jacket: Manufacturer part # p3410718 - DennisKirk Part # 3410718S - Heavy-duty 1.2-1.4mm leather construction. Vintage leather treatment. Vintage flattrack graphics. CE-approved armor in elbows and shoulders. Zippered cooling vents. Insulated liner is removable.. p3410718 1 on hand More Info/Options for Icon Vintage Flattrack Jacket p3410718 3410718S

$470.00 Icon Vintage Flattrack Jacket p3410718 3410718XL $470.00 Manufacturer: Icon Dennis Kirk Part #: 3410718XL Icon Vintage Flattrack Jacket: Manufacturer part # p3410718 - DennisKirk Part # 3410718XL - Heavy-duty 1.2-1.4mm leather construction. Vintage leather treatment. Vintage flattrack graphics. CE-approved armor in elbows and shoulders. Zippered cooling vents. Insulated liner is removable.. p3410718 1 on hand More Info/Options for Icon Vintage Flattrack Jacket p3410718 3410718XL

$470.00 Icon Vintage Flattrack Jacket p3410718 3410718L $470.00 Manufacturer: Icon Dennis Kirk Part #: 3410718L Icon Vintage Flattrack Jacket: Manufacturer part # p3410718 - DennisKirk Part # 3410718L - Heavy-duty 1.2-1.4mm leather construction. Vintage leather treatment. Vintage flattrack graphics. CE-approved armor in elbows and shoulders. Zippered cooling vents. Insulated liner is removable.. p3410718 2 on hand More Info/Options for Icon Vintage Flattrack Jacket p3410718 3410718L

$470.00 Icon Vintage Flattrack Jacket p3410718 3410718XXL $470.00 Manufacturer: Icon Dennis Kirk Part #: 3410718XXL Icon Vintage Flattrack Jacket: Manufacturer part # p3410718 - DennisKirk Part # 3410718XXL - Heavy-duty 1.2-1.4mm leather construction. Vintage leather treatment. Vintage flattrack graphics. CE-approved armor in elbows and shoulders. Zippered cooling vents. Insulated liner is removable.. p3410718 2 on hand More Info/Options for Icon Vintage Flattrack Jacket p3410718 3410718XXL

$469.99 Scorpion Oval Slip-On Muffler with Polished Stainless Steel Muffler Sleeve SI 86 $469.99 Manufacturer: Scorpion Dennis Kirk Part #: 4401307 Scorpion Oval Slip-On Muffler with Polished Stainless Steel Muffler Sleeve: Manufacturer part # SI 86 - High-performance mufflers that have been dyno- and track-proven to increase overall performance; very high mid-range performance boosts. Model-specific designs require no re-mapping or re-jetting. Stainless steel inner components. Space-technology sound absorbtion; never requires repacking and offers consistent sound. Lambda sensor connectors are fitted for models that require sensors. Slip-on style. Stainless steel inlet pipe. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. SI 86 3 on hand More Info/Options for Scorpion Oval Slip-On Muffler with Polished Stainless Steel Muffler Sleeve SI 86

$469.99 Edelbrock Thumb Throttle Carb Kit 3027 $469.99 Manufacturer: Edelbrock Dennis Kirk Part #: 16486 Edelbrock Thumb Throttle Carb Kit: Manufacturer part # 3027 - Pumper-style carburetor designed exclusively for ATVs; more horsepower and more reliability. Flat slide with single fuel circuit for easy external adjustment; no jets to replace. Features internal fuel cell and anti-slosh plate in fuel bowl for steady fuel delivery. Mounts directly and easily to stock manifold. For twist throttle or thumb throttle. throttle and cable included. NOTE: Thumb throttle are not included in this, must reuse the OEM thumb throttle. For machines listed with a big bore kit.. 3027 2 on hand More Info/Options for Edelbrock Thumb Throttle Carb Kit 3027

$469.99 Scorpion Oval Slip-On Muffler with Polished Stainless Steel Muffler Sleeve SI 97 $469.99 Manufacturer: Scorpion Dennis Kirk Part #: 4402254 Scorpion Oval Slip-On Muffler with Polished Stainless Steel Muffler Sleeve: Manufacturer part # SI 97 - High-performance mufflers that have been dyno- and track-proven to increase overall performance; very high mid-range performance boosts. Model-specific designs require no re-mapping or re-jetting. Stainless steel inner components. Space-technology sound absorption; never requires repacking and offers consistent sound. O2 Lambda sensor connectors are fitted for models that require sensors. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. , , NOTE: Catalyst has been removed; recommended for race use only. SI 97 Expected Soon More Info/Options for Scorpion Oval Slip-On Muffler with Polished Stainless Steel Muffler Sleeve SI 97

$469.99 Accutronix Elite 41mm Wide Glide Triple Tree TWG41EC $469.99 Manufacturer: Accutronix Dennis Kirk Part #: 588176 Accutronix Elite 41mm Wide Glide Triple Tree: Manufacturer part # TWG41EC - Chrome-plated 6061 T-6 billet aluminum. Radius groove design matches the rest of the Elite line. Includes stem, stem nut, pinch bolts and fork stops. Made in the U.S.A... TWG41EC 1 on hand More Info/Options for Accutronix Elite 41mm Wide Glide Triple Tree TWG41EC

$469.99 Scorpion Oval Slip-on Muffler with Polished Stainless Steel Muffler Sleeve SI 85 $469.99 Manufacturer: Scorpion Dennis Kirk Part #: 4400652 Scorpion Oval Slip-on Muffler with Polished Stainless Steel Muffler Sleeve: Manufacturer part # SI 85 - High-performance mufflers that have been dyno- and track-proven to increase overall performance; very high mid-range performance boosts. Model-specific designs require no re-mapping or re-jetting. Stainless steel inner components. Space-technology sound absorption; never requires repacking and offers consistent sound. O2 Lambda sensor connectors are fitted for models that require sensors. Stainless steel inlet pipe INCLUDED ITEMS: One K5 silencer. One 43-47mm band clamp. One carbon silencer bracket. One aluminum collar. One replacement servo wheel. One cover ring to be refitted when DB killer is removed. One instruction sheet. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. SI 85 5 on hand More Info/Options for Scorpion Oval Slip-on Muffler with Polished Stainless Steel Muffler Sleeve SI 85

$469.99 Rivera Engineering Pro Clutch Kit p383430 $469.99 Manufacturer: Rivera Engineering Dennis Kirk Part #: 383430 Rivera Engineering Pro Clutch Kit: Manufacturer part # p383430 - Gets horsepower to the rear wheel by providing a large increase in clutch plate surface. Kit features a diaphragm clutch spring for maximum plate pressure. Includes hub, plates and spring. Install easily by removing original clutch hub, pressing in the Pro Clutch hub and installing the clutch pack. Replacement clutch components are also available. Made in the U.S.A... p383430 1 on hand More Info/Options for Rivera Engineering Pro Clutch Kit p383430

$469.95 BUB Sleepers Slip-On Mufflers 142020BB $469.95 Manufacturer: BUB Dennis Kirk Part #: 430720 BUB Sleepers Slip-On Mufflers: Manufacturer part # 142020BB - Sleepers mufflers from BUB follow the same lines as the stock mufflers, but that is where the similarities end. Chrome end caps grace the ends of these beauties. Deep, throaty sound - as it should be, but not obnoxious. Baffles are removable so you can run them with or without packing. Half the weight of stock and increaced acceleration all more fun to your ride. Mounting hardware and instructions included. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 142020BB 1 on hand More Info/Options for BUB Sleepers Slip-On Mufflers 142020BB

$469.95 BUB Flush-Cut Chambermaids 141024CG $469.95 Manufacturer: BUB Dennis Kirk Part #: 431186 BUB Flush-Cut Chambermaids: Manufacturer part # 141024CG - Fat 2 in. pipes in a mid-length design with full-length 2 1/4 in. heat shields welded in place. Dial-in your machine with the included two sets of torque chambers and a pair of baffles. Torque chambers give you the sound of straight pipes and provide the correct back pressure for proper performance. Made in the U.S.A., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 141024CG 1 on hand More Info/Options for BUB Flush-Cut Chambermaids 141024CG

$469.95 Vance & Hines Classic II Bagger Dual Exhaust System 19403 $469.95 Manufacturer: Vance & Hines Dennis Kirk Part #: 445212 Vance & Hines Classic II Bagger Dual Exhaust System: Manufacturer part # 19403 - For Touring Cruisers. Power, performance and great sound for Japanese touring cruisers. Oversized 4 in. mufflers featuring 220 degree full coverage. Full length headpipe heat shields that virtually eliminate blueing for new looking, show quality pipes for many years to come. Comes complete with all necessary mounting hardware and instructions. Carburetor re-jetting may be necessary for optimum performance. This is a 2:2 dual exhaust which exits one pipe on each side of the motorcycle, under the saddlebags. End caps are not included and not used on this system. These are 4 in. diameter mufflers with slash-down ends, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 19403 1 on hand More Info/Options for Vance & Hines Classic II Bagger Dual Exhaust System 19403

$469.95 Vance & Hines SS2-R 4-into-1 Exhaust System W/Chrome Header Pipe & Polished Aluminum Oval Muffler Sleeve 12504 $469.95 Manufacturer: Vance & Hines Dennis Kirk Part #: 440421 Vance & Hines SS2-R 4-into-1 Exhaust System W/Chrome Header Pipe & Polished Aluminum Oval Muffler Sleeve: Manufacturer part # 12504 - Designed to meet the demands of todays sportbike rider with increased performance and a responsible sound level. The ultimate in performance, finish and fit, for hassle-free installation. Three-piece design features quick-release, spring mounted canister and middle section. Large diameter, smooth-bend headpipes for maximum exhaust flow. Polished, hard nickel plating on all headers and middle pipes fights corrosion and rust. Unique high-volume oval design canisters are available in highly polished aluminum. An effective triple-chambered baffling system cancels noise waves, not the power pulses. All baffles are removable and re-packable. Billet, machined aluminum end caps Some carburetor re-jetting may be required for optimum performance, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 12504 1 on hand More Info/Options for Vance & Hines SS2-R 4-into-1 Exhaust System W/Chrome Header Pipe & Polished Aluminum Oval Muffler Sleeve 12504

$468.99 Vance & Hines Pro-Pipe BP Exhaust System 17549 $468.99 Manufacturer: Vance & Hines Dennis Kirk Part #: 4402065 Vance & Hines Pro-Pipe BP Exhaust System: Manufacturer part # 17549 - A 100% blue-proof design makes this the most sought after 2-into-1 performance pipe for Harleys. Newly improved with the addition of blue-proof technology over the entire pipe.. With 2-1/8 in. header and collector heat shield and new full coverage megaphone heat shield, Pro Pipe BP carries on the heritage of track proven performance, now with a blue proof chrome finish. Includes mounts for factory O2 Sensors. Removable baffles. Made in the U.S.A.. , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 17549 1 on hand More Info/Options for Vance & Hines Pro-Pipe BP Exhaust System 17549

$468.99 Scorpion Titanium Slip-On Silencer DSHA 55 $468.99 Manufacturer: Scorpion Dennis Kirk Part #: 432486 Scorpion Titanium Slip-On Silencer: Manufacturer part # DSHA 55 - Model-specific design to bring out the best in your machine. Boost power throughout the rpm range and improve throttle response. No repacking or re-jetting. Include removable, U.S.F.S. approved spark arrestor. Stainless steel head pipes available for an easy upgrade to a full system, order Part no. 43-2502. INCLUDED ITEMS: One slip on silencer. One 51-55mm band clamp. One 43-47mm band clamp. One M8 washer. One M8 x 45mm cap head bolt. One 25mm aluminum spacer. One H type silencer strap. One protective rubber for silencer strap. One connecting pipe. One instruction sheet. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration .. DSHA 55 1 on hand Mo