TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Maxxis Classic Cruiser Front Tire CLASSIC M6011 651628

$63.99 Maxxis Desert IT Tire MAXXCROSS DESERT 643076 $63.99 Manufacturer: Maxxis Dennis Kirk Part #: 643076 Maxxis Desert IT Tire: Manufacturer part # MAXXCROSS DESERT - DennisKirk Part # 643076 - For sandy and rocky conditions. The latest addition to Maxxis' off-road motorcycle tire line. Specially designed compound increases durability in rocky or desert conditions by reducing chipping and cutting. Stiffer carcass design minimizes flex, reducing the chance of pinched tubes. Tall knob design improves traction when tracing in sandy conditions. Sidewall ID Information: Maxxis MAXX IT DESERT 110/90-19. , Dimensions:, Inflated Width/Measuring Rim Width: 5.00 in./2.15 in., Inflated Diameter: 27.10 in., Acceptable Rim Widths: 2.15 in., Deepest Tread Depth: 22/32 in., Balance Dot: No, Directional arrow: No, Speed Rating: R-Rated for speeds up to 106 MPH, , Capacities and Construction:, Load Capacity/Inflation Pressure: 584 LBS/32 PSI, Load Range: Not specified, Bias or Radial Ply: Bias, Tread Plies/Material: Not specified, Sidewall Plies/Material: Not specified, DOT approved for Road Use: No, Tube or Tubeless: Tube-Type only, , NOTE: A new tube and rim strip is recommended with every new tire. MAXXCROSS DESERT 4 on hand More Info/Options for Maxxis Desert IT Tire MAXXCROSS DESERT 643076

$63.99 Maxxis M7305 Maxxcross IT Tire MAXXCROSS IT 541955 $63.99 Manufacturer: Maxxis Dennis Kirk Part #: 541955 Maxxis M7305 Maxxcross IT Tire: Manufacturer part # MAXXCROSS IT - DennisKirk Part # 541955 - Rated for speeds up to 81mph. Revolutionary new tire developed on the AMA Supercross and Motocross tours. Knob design provides remarkable control and steering accuracy in vast range of conditions. Rubber compound is formulated to deliver maximum traction and increased life of knob edges. Front tire in combination with the M7305 rear offer the best overall performance; rear tire in combination with M7304 front offer the best overall performance. Sidewall ID Information: Maxxis 110/90-19 62M MaxxCross IT. , Dimensions:, Inflated Width /Measuring Rim Width: 5.00 in./2.15 in., Inflated Diameter: 27.2 in., Acceptable Rim Width(s): 2.15 in., Deepest Tread Depth: 20/32 in.,, Directional Arrow: None, Speed Rating: M-Rated up to 81 MPH, , Capacities and Construction:, Load Capacity/Inflation Pressure: 585 lbs/32 PSI, Tread Plies/Material: Not Specified, Sidewall Plies/Material: Not Specified, DOT approved for Road Use: Not DOT Approved, Tube or Tubeless: Tube Type, , NOTE: A new tube and rim strip is recommended with every new tire. MAXXCROSS IT More than 10 on hand More Info/Options for Maxxis M7305 Maxxcross IT Tire MAXXCROSS IT 541955

$63.99 DP Brakes DP Sport HH+ Supersport Sintered Brake Pads SDP942HH $63.99 Manufacturer: DP Brakes Dennis Kirk Part #: 195534 DP Brakes DP Sport HH+ Supersport Sintered Brake Pads: Manufacturer part # SDP942HH - In brake pad shootout tests, DP Brakes were rated #1 in Germany's "Motorrad" magazine and England's "Motorcycle News". Get high-tech performance in all conditions for your motorcycle with DP Brakes brake pads and shoes. Sintered metal dust-free compound design gives superior performance for consistent, hard stops and fade-free performance. Brake pads and shoes have a short break-in period so you get maximum performance fast. Sintered metal compounds will outlast most organic or Kevlar pads and are safe for all OEM rotors. , SPORT HH+ SUPERSPORT PADS , Pads have an industry-high friction rating of HH+ for powerful stopping power with no mileage penalty. Brake fade is eliminated using new high-tech ceramic heat shield. Pad compound design is dust-free. Get maximum braking ability fast from short break-in period. For use ONLY on front wheel. , NOTE: NEVER USE SINTERED BRAKE PADS IN BIKES ORIGINALLY EQUIPPED WITH NON-SINTERED BRAKE PADS. Check your owners manual to see if sintered metal brakes were OEM equipment on your motorcycle., , NOTE: All brake pads and shoes are sold in a set for one disc or drum. You must order one set for each disc or drum on your motorcycle.. SDP942HH 1 on hand More Info/Options for DP Brakes DP Sport HH+ Supersport Sintered Brake Pads SDP942HH

$63.99 Carlisle Ultimax ATV Belt UA417 $63.99 Manufacturer: Carlisle Dennis Kirk Part #: 02627 Carlisle Ultimax ATV Belt: Manufacturer part # UA417 - Constructed from premium rubber compounds and tough Aramax inner cord. Enhances the efficiency of variable speed drive systems. Eliminates excessive friction and tension, to prevent your ATV from drive damage. Exact belt length minimizes system wear and avoids slippage.. UA417 3 on hand More Info/Options for Carlisle Ultimax ATV Belt UA417

$63.99 Nelson-Rigg Mini-Sport Tail Pack CL75 $63.99 Manufacturer: Nelson-Rigg Dennis Kirk Part #: 506589 Nelson-Rigg Mini-Sport Tail Pack: Manufacturer part # CL75 - Will fit even the smallest of tail sections. Made from UV-treated Tri-Max nylon with a fully lined interior. Even when empty the bag will retain its shape. Will work with Nelson-Rigg's saddlebags or for solo use. Measures 10" L x 9 1/2" W x 7" H.. CL75 More than 10 on hand More Info/Options for Nelson-Rigg Mini-Sport Tail Pack CL75

$63.99 Maxxis Classic Cruiser Front Tire CLASSIC M6011 651628 $63.99 Manufacturer: Maxxis Dennis Kirk Part #: 651628 Maxxis Classic Cruiser Front Tire: Manufacturer part # CLASSIC M6011 - DennisKirk Part # 651628 - Long-wearing carcass construction and specially formulated compound combine to give you unbeatable durability and performance. Unique matched tread pattern front and rear for maximum stability and handling. Special, deep offset tread pattern channels water away from contact patch for sure-footed handling in wet conditions. Sidewall ID Information: MAXXIS 90/90-19 52H CLASSIC. , Dimensions: , Inflated Width/Measuring Rim Width: 3.50 in./2.15 in., Inflated Diameter: 26.7 in., Acceptable Rim Width: 2.15 in., Deepest Tread Depth: 4/32 in., Balance dot: Yes-Yellow, Directional Arrow: Yes, Speed Rating: H-Rated up to 130 MPH, , Capacities and Construction: , Load Capacity/Inflation Pressure: 440 lbs./33 PSI, Load Range: B, Bias or Radial Ply: Bias, Tread Plies/Material: Not Specified, Sidewall Plies/Material: Not Specified, DOT Approved for Road Use: Yes, Tube or Tubeless: Tubeless. CLASSIC M6011 1 on hand More Info/Options for Maxxis Classic Cruiser Front Tire CLASSIC M6011 651628

$63.99 Emgo Bell-End Megaphone Mufflers p433825 $63.99 Manufacturer: Emgo Dennis Kirk Part #: 433825 Emgo Bell-End Megaphone Mufflers: Manufacturer part # p433825 - Bring back the glory days of choppers with these retro-styled mufflers. With a 1 3/4" inlet, a reducer will allow for an additional fitment to 1 5/8" and 1 1/2". The baffle can be removed. Comes in upswept (43-3826, 43-3827) or standard styles. Sold each. Right or Left side, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration, , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing... p433825 4 on hand More Info/Options for Emgo Bell-End Megaphone Mufflers p433825

$63.99 AGV Anti-Fog Shield AG0138 $63.99 Manufacturer: AGV Dennis Kirk Part #: 324641 AGV Anti-Fog Shield: Manufacturer part # AG0138 -. AG0138 6 on hand More Info/Options for AGV Anti-Fog Shield AG0138

$63.99 Superwinch Roller Fairlead for EX-1 1560A $63.99 Manufacturer: Superwinch Dennis Kirk Part #: 61308 Superwinch Roller Fairlead for EX-1: Manufacturer part # 1560A - Replacement part for Superwinch.. 1560A 1 on hand More Info/Options for Superwinch Roller Fairlead for EX-1 1560A

$63.99 UFO Husqvarna Enduro Rear Fenders w/Taillight HU03333041 $63.99 Manufacturer: UFO Dennis Kirk Part #: 618869 UFO Husqvarna Enduro Rear Fenders w/Taillight: Manufacturer part # HU03333041 - Plastic is color-matched to stock or in optional works colors. Pre-drilled pieces mount easily to stock locations. Made in Italy.. HU03333041 1 on hand More Info/Options for UFO Husqvarna Enduro Rear Fenders w/Taillight HU03333041

$63.99 Woodys Square Backer Plates ASW-3725 080017 $63.99 Manufacturer: Woodys Dennis Kirk Part #: 080017 Woodys Square Backer Plates: Manufacturer part # ASW-3725 - DennisKirk Part # 080017 - For single-point studs on rubber tracks to prevent pull-through. Square are 1 1/8", round are 1" diameter. 7mm fits 7mm and 1/4" stud shanks. Domed for strength. .125" Thickness and .205" Installed Heights.. ASW-3725 2 on hand More Info/Options for Woodys Square Backer Plates ASW-3725 080017

$63.99 Slip Streamer Standard Replacement Fairing Windshield 160 $63.99 Manufacturer: Slip Streamer Dennis Kirk Part #: 23471 Slip Streamer Standard Replacement Fairing Windshield: Manufacturer part # 160 - Made of crystal-clear 3/16 in. acrylic. Replace originals directly. Replacement windshields for Honda Gold Wing are taller and several inches wider than OEM windshields. Vented windshields channel fresh air for warm-weather comfort and feature tough brass and plastic mechanisms.. 160 3 on hand More Info/Options for Slip Streamer Standard Replacement Fairing Windshield 160

$63.99 JIMS Clutch Hub Puller 1004A $63.99 Manufacturer: JIMS Dennis Kirk Part #: H28028 JIMS Clutch Hub Puller: Manufacturer part # 1004A - Perfect for use on 3-, 5- or 10-finger clutch hubs as well as 45 in. clutch hubs. Also works on motor sprockets and alternator covers on Big Twins, early XL clutches and many other applications. Made in the U.S.A... 1004A 2 on hand More Info/Options for JIMS Clutch Hub Puller 1004A

$63.99 IRC Durotour RS-310 Muscle Bike/Sport Touring Front Tire RS-310 64374 $63.99 Manufacturer: IRC Dennis Kirk Part #: 64374 IRC Durotour RS-310 Muscle Bike/Sport Touring Front Tire: Manufacturer part # RS-310 - DennisKirk Part # 64374 - For general all around performance, handling and mileage, nothing beats a pair of RS-310s H-rated up to 130 mph. Muscle bike/Sport touring tire. Tube/tubeless for any rim. 90-series low profile. Available in black (BLK). Tire pictured on left. Sidewall ID Information: IRC 90/90-18 M/C 51H DURO TOUR RS-310F. , Dimensions: , Inflated Width/Measuring Rim Width: 3.70 in./2.15 in., Inflated Diameter: 24.5 in., Acceptable Rim Width: 2.15 in., Deepest Tread Depth: 6/32 in., Balance DOT: Yes, Directional Arrow: Yes, Speed Rating: H-Rated up to 130 MPH, , Capacities and Construction: , Load Capacity/Inflation Pressure: 430 lbs./41 PSI, Load Range: B, Bias or Radial Ply: Bias, Tread Plies/Material: 3 Nylon, Sidewall Plies/Material: 2 Nylon, DOT Approved for Road Use: Yes, Tube or Tubeless: Tubeless-Can be used with a tube. RS-310 Expected Soon More Info/Options for IRC Durotour RS-310 Muscle Bike/Sport Touring Front Tire RS-310 64374

$63.99 Roetin Hi Performance X-PR One Carbide Wear Rods XPR1-630 $63.99 Manufacturer: Roetin Dennis Kirk Part #: 03838 Roetin Hi Performance X-PR One Carbide Wear Rods: Manufacturer part # XPR1-630 - 6 1/2 in. of 60º carbide. 1/2 in. diameter host bar. Two carbide wear pads for added durability. , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.. XPR1-630 1 on hand More Info/Options for Roetin Hi Performance X-PR One Carbide Wear Rods XPR1-630

$63.99 Winderosa Engine Complete Gasket Set/2 Cylinder 711208 $63.99 Manufacturer: Winderosa Dennis Kirk Part #: 261480 Winderosa Engine Complete Gasket Set/2 Cylinder: Manufacturer part # 711208 - Complete gasket sets contain all necessary engine gaskets for a complete rebuild. They include cylinder head, base, intake and exhaust manifold gaskets or O-rings and crankshaft end seals. Single cylinder sets contain crankcase gasket where required.. 711208 More than 10 on hand More Info/Options for Winderosa Engine Complete Gasket Set/2 Cylinder 711208

$63.99 Sunstar Sprocket 2632338 $63.99 Manufacturer: Sunstar Dennis Kirk Part #: 80554238S Sunstar Sprocket: Manufacturer part # 2632338 - High quality, all steel sprockets meet the demands of todays highest horsepower machines. Powerdrive countershaft (front) sprockets are manufactured from case-hardened chromoly steel for the ultimate in strength and durability. They also receive a parkerizing surface treatment for rust and corrosion resistance. Sunstar steel rear sprockets are manufactured from the highest quality 1045 high-carbon steel, and most are heat treated for added strength and wear resistance. Computer designed weight reduction holes are included where possible. Most rear sprockets are zinc plated, and some have a baked-on durable paint for corrosion resistance. Many conversions are available from unpopular 632 and 532 sizes to 630 and 530 sizes for better chain selection, as well as other lighter-weight options for racing. Any time you use other than the standard front/rear sprocket sizes, clearance must be checked. When converting to a smaller chain size, especially for racing, be sure to use the highest grade 0-ring chain available (non-O-ring heavy-duty acceptable for drag racing). NOTE: To convert to 530 chain, order a Part Number 80-068- front sprocket and 80-035- rear sprocket. The following models must use a 6mm (.24") thick washer on the countershaft sprocket (acquire locally); GS750 80-83 - all and GS1000/1100/1150 - all.. 2632338 1 on hand More Info/Options for Sunstar Sprocket 2632338

$63.99 Nelson-Rigg Tail Pack CL750 $63.99 Manufacturer: Nelson-Rigg Dennis Kirk Part #: 506591 Nelson-Rigg Tail Pack: Manufacturer part # CL750 - Exclusive FiberTech panels give a performance-driven finish. Four-point bungee cord mounting system. Reinforced handle and quick-release shoulder strap. Smart fabric technology allows pack to be made of material that is tough yet pliable, water resistant yet breathable. Large compartment is big enough to hold full-face helmet. Outside zippered pocket and two inner mesh pockets. Highly visible reflective webbing. Measures 10 1/2" L x 11" W x 9" H.. CL750 3 on hand More Info/Options for Nelson-Rigg Tail Pack CL750