TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Magnum Sterling Chromite II Custom Single-Disc Brake Line 36143

$63.99 Goodridge 45 Degree Female Hose End 60450203C $63.99 Manufacturer: Goodridge Dennis Kirk Part #: 198454 Goodridge 45 Degree Female Hose End: Manufacturer part # 60450203C - Chrome-plated finish. Designed for use with -2 size hose. Accepts most hydraulic brake light switches.. 60450203C 1 on hand More Info/Options for Goodridge 45 Degree Female Hose End 60450203C

$63.99 Roetin Hi Performance X-PR One Carbide Wear Rods XPR1-258 $63.99 Manufacturer: Roetin Dennis Kirk Part #: 031901 Roetin Hi Performance X-PR One Carbide Wear Rods: Manufacturer part # XPR1-258 - 6 1/2 in. of 60º carbide. 1/2 in. diameter host bar. Two carbide wear pads for added durability. , , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing., , NOTE: , Some of the models listed have EZ Steer as original equipment, which is retained with the installation of any X-10 One or X-PR One carbides. If you wish to eliminate the original plate and 2-stud, 14 3/4 in. wear rods you may replace them with an X-10 One or X-PR One 3-stud, 27 1/2 in. type, , Polaris Touring 600 HO FCI IQ 08/Touring IQ FS/FST 08 only requires one rod per ski. XPR1-258 2 on hand More Info/Options for Roetin Hi Performance X-PR One Carbide Wear Rods XPR1-258

$63.99 Maxxis M932 Razr Tire M932 RAZR $63.99 Manufacturer: Maxxis Dennis Kirk Part #: 652322 Maxxis M932 Razr Tire: Manufacturer part # M932 RAZR - Race-proven design features the latest in cutting-edge performance and technology. Rugged construction for puncture resistance with a weight-saving design. Front tire features a raised center ridge for precise steering and side knobs that improve steering and handling. Rear tire provides maximum acceleration on hard pack or mud. Tire compound designed for improved traction and superior wear. Tube or tubeless. M932 RAZR 3 on hand More Info/Options for Maxxis M932 Razr Tire M932 RAZR

$63.99 EK 520 ATVG Chain 520SRX 11004488 $63.99 Manufacturer: EK Dennis Kirk Part #: 11004488 EK 520 ATVG Chain: Manufacturer part # 520SRX - DennisKirk Part # 11004488 - For utility, unmodified and noncompetition machines. Thicker side plates, longer wear life and fatigue strength. Four-point pin riveting. ATVG features X-ring seals to lock in K3 lube and lock out grit. Solid bushings and rollers for longer chain life. , Includes a Clip Type Master Link , , Replacement connecting link:, Clip-Type: part no. 11-0088, Rivet Type: part No. 11-0089. 520SRX 2 on hand More Info/Options for EK 520 ATVG Chain 520SRX 11004488

$63.99 Maxxis M962 Mud Bug Tire M962 MUD BUG $63.99 Manufacturer: Maxxis Dennis Kirk Part #: 541635 Maxxis M962 Mud Bug Tire: Manufacturer part # M962 MUD BUG - Great for riding in the Mud. Rugged, reinforced carcass construction. Features traction lugs of exceptional strength. Lug design overlaps the centerline ridge to direct mud away from the contact patch which provides traction in the most demanding conditions. Delivers superior ground clearance, puncture resistance and ride quality. Tube or tubeless. M962 MUD BUG 4 on hand More Info/Options for Maxxis M962 Mud Bug Tire M962 MUD BUG

$63.99 Kenda K535 Knarly Tire K535 541611 $63.99 Manufacturer: Kenda Dennis Kirk Part #: 541611 Kenda K535 Knarly Tire: Manufacturer part # K535 - DennisKirk Part # 541611 - Bring it on Baja!. Hefty knobs and sidewalls. Ready for high speed punishment. Tube or tubeless. K535 4 on hand More Info/Options for Kenda K535 Knarly Tire K535 541611

$63.99 Vesrah Clutch Discs VC140 $63.99 Manufacturer: Vesrah Dennis Kirk Part #: 38638 Vesrah Clutch Discs: Manufacturer part # VC140 - High quality Vesrah clutch discs are manufactured to meet OEM standards. Friction plates are made of high-friction, high-density materials to reduce expansion and fading under hard use and high-heat conditions. Includes friction plates only, not steel plates. , NOTE: Most disc set package quantities match OEM quantity requirements. However, to simplify our line we have eliminated some less popular package quantities and substituted sets with more discs.. VC140 2 on hand More Info/Options for Vesrah Clutch Discs VC140

$63.99 Parts Unlimited Piston Assembly 09-609 $63.99 Manufacturer: Parts Unlimited Dennis Kirk Part #: 131136S Parts Unlimited Piston Assembly: Manufacturer part # 09-609 - Dennis Kirk has high-quality, OEM-type piston assemblies to fit most popular snowmobiles. These pistons more closely match the original equipment in ring design, construction and weight than our other aftermarket pistons. Its not necessary to replace both pistons in a twin-cylinder engine if you need only one. All piston assemblies include rings(s), wrist pin and circlips. , , Replacement Ring Set: 131136SR, , NOTE: Dennis Kirk recommends the following preliminary work to be performed by a qualified mechanic prior to installing new pistons. If the old piston has failed, determine the cause and remedy the problem before replacing. Air leaks and/or a lean fuel mixture are the two biggest causes of burned pistons. In cases where any part of the old piston is broken or burned through, the crankcase should be disassembled and throughly flushed of any debris.. 09-609 Expected Soon More Info/Options for Parts Unlimited Piston Assembly 09-609

$63.99 Belt Drives LTD SS-2 2 in. Belt Drive Polished Dome Cover SSPDC $63.99 Manufacturer: Belt Drives LTD Dennis Kirk Part #: 02681 Belt Drives LTD SS-2 2 in. Belt Drive Polished Dome Cover: Manufacturer part # SSPDC - Polished dome covers for BDL SS-2 in. belt drive; Part No. 02-673.. SSPDC 1 on hand More Info/Options for Belt Drives LTD SS-2 2 in. Belt Drive Polished Dome Cover SSPDC

$63.99 Pirelli MT21 Tire 0341500 $63.99 Manufacturer: Pirelli Dennis Kirk Part #: 651283 Pirelli MT21 Tire: Manufacturer part # 0341500 - DOT APPROVED. Provides excellent off-road performance, even over long distances. Chosen as one of the most aggressive dual sport tires on the market for two consecutive years by Dirt Bike magazine. Designed mainly for off-road use. Sidewall ID Information: Pirelli 110/80-18 M/C 58P MT21 Rally. , Dimensions:, Inflated Width /Measuring Rim Width: 4.45 in./2.50 in., Inflated Diameter: 26.06 in., Acceptable Rim Width(s): 2.15-3.00 in., Deepest Tread Depth: 17/32 in., Directional Arrow: None, Speed Rating: P-Rated up to 93 MPH, , Capacities and Construction:, Load Capacity/Inflation Pressure: 535 lbs/32 PSI, Tread Plies/Material: 3 Nylon, Sidewall Plies/Material: 2 Nylon, DOT approved for Road Use: Yes, Tube or Tubeless: Tube Type, , NOTE: 90 percent offroad/10 percent on road, , NOTE: A new tube is recommended with every new tire. 0341500 4 on hand More Info/Options for Pirelli MT21 Tire 0341500

$63.99 Magnum Black Pearl Braided Custom Single-Disc Brake Line p1902277 1902280 $63.99 Manufacturer: Magnum Dennis Kirk Part #: 1902280 Magnum Black Pearl Braided Custom Single-Disc Brake Line: Manufacturer part # p1902277 - DennisKirk Part # 1902280 - Black Pearl braid features black-chrome fittings. 35 degree 12mm banjo fittings on the master cylinder end of the brake line (also available in 35 or 90 degree top angle). Black Pearl single-disc brake lines available in lengths of 40 in. - 58 in.. All lines have a 7/16 in. banjo fitting on the master cylinder end and a 90 degree 3/8 in./10mm banjo fitting on the caliper end. , , Included Items:. , 1. (1) Brake line 52" with one 10mm 90 degree banjo and one 12mm straight banjo fitting. , 2. (2) 10mm crush washers , 3. (2) 12mm crush washers. , 4. (1) Instruction sheet.. p1902277 2 on hand More Info/Options for Magnum Black Pearl Braided Custom Single-Disc Brake Line p1902277 1902280

$63.99 Genuine James Top End Gasket Set JGI1705499X $63.99 Manufacturer: Genuine James Dennis Kirk Part #: h26414 Genuine James Top End Gasket Set: Manufacturer part # JGI1705499X - Sets contain all gaskets, oil seals and O-rings necessary to completely rebuild top end. Set include graphite-coated head gaskets. .036 in head gasket, metal with silicone rocker box gaskets. Replaces OEM # 17054-99-x. For models listed with 95 in. big bore. NOTE: Includes valve stem seals. JGI1705499X 1 on hand More Info/Options for Genuine James Top End Gasket Set JGI1705499X

$63.99 JIMS Solid Tappet +.002 in. 2472-1 $63.99 Manufacturer: JIMS Dennis Kirk Part #: H14414 JIMS Solid Tappet +.002 in.: Manufacturer part # 2472-1 - Big Axle design features an outer wheel/roller with a 27% greater wall size for less harmonic distortion and better tracking of cam lobe. Standard tappets made from top quality materials that meet or exceed all OEM specs. Pin bearings are 12% smaller for increased rpm and more precise tracking. 36% larger axle doubles as the inner race, allowing the pin bearings and complete roller assembly to rotate around the axle instead of an inner race, which eliminates movement in and around the axle. Made in the U.S.A.. Replaces OEM # 18509-52B. , NOTE: Adjustable pushrods must be used with solid tappets.. 2472-1 2 on hand More Info/Options for JIMS Solid Tappet +.002 in. 2472-1

$63.99 DP Brakes DP Racing Sintered Race Brake Pads DP964 $63.99 Manufacturer: DP Brakes Dennis Kirk Part #: 1901102 DP Brakes DP Racing Sintered Race Brake Pads: Manufacturer part # DP964 - In brake pad shootout tests, DP Brakes were rated #1 in Germany's Motorrad magazine and Englands Motorcycle News. Get high-tech performance in all conditions for your motorcycle with DP Brakes brake pads and shoes. Sintered metal dust-free compound design gives superior performance for consistent, hard stops and fade-free performance. Brake pads and shoes have a quick break-in period so you get maximum performance fast. Sintered metal compounds will outlast more organic or Kevlar® pads, and are safe for all OEM rotors. Recommended for track use ONLY . Pads are designed to perform at the World Superbike level, where an HH friction rating is required. Pad backplate has a cream colored, state-of-the-art Zirconium-based ceramic material on rear of backing plate that works as a heat shield in high-stress conditions to keep heat away from the caliper piston and fluid. Fingertip control throughout the stop combined with maximum initial braking power. Fade-free performance even in the harshest conditions. , NOTE: NEVER USE SINTERED BRAKE PADS IN BIKES ORIGINALLY EQUIPPED WITH NON-SINTERED BRAKE PADS. Check your owners manual to see if sintered metal brakes were OEM equipment on your motorcycle., , NOTE: All brake pads and shoes are sold in a set for one disc or drum. You must order one set for each disc or drum on your motorcycle. DP964 1 on hand More Info/Options for DP Brakes DP Racing Sintered Race Brake Pads DP964

$63.99 Magnum Sterling Chromite II Custom Single-Disc Brake Line 36143 $63.99 Manufacturer: Magnum Dennis Kirk Part #: 1900527 Magnum Sterling Chromite II Custom Single-Disc Brake Line: Manufacturer part # 36143 - Same features as the other Chromite II brake lines. 35°, 12mm banjo fittings on the master cylinder end of the brake lines. Single-disc brake line in lengths of 36"-74". All lines have a 7/16" banjo fitting on the master cylinder end and a 90° 3/8"/10mm banjo fitting on the caliper end. , Included Items: , (1) Brake line 43 in. w/one 10mm 90-degree banjo and one 12mm 35-degree banjo, (2) 10mm crush washers, (2) 12mm crush washers. 36143 1 on hand More Info/Options for Magnum Sterling Chromite II Custom Single-Disc Brake Line 36143

$63.99 Sno-Stuff Gradient Graphics Style Windshield 450-231-03 $63.99 Manufacturer: Sno-Stuff Dennis Kirk Part #: 24435 Sno-Stuff Gradient Graphics Style Windshield: Manufacturer part # 450-231-03 - Sno Stuff windshields match originals exactly. Tough, cold-resistant .075 in. thick butyrate material. Precision cut and formed with permanently attached trim molding. Mounting O-rings, dart screws and grommets available separately. Note: All windshields are protected with plastic shrinkwrap for shipping. Before removing, be certain that you are going to keep it. Windshields with plastic wrap removed are not returnable Note: For Indy Ultra SP 1997 and XCR440 Special 1996 OEM windshields have hand wings; this replacement windshield does not. 450-231-03 More than 10 on hand More Info/Options for Sno-Stuff Gradient Graphics Style Windshield 450-231-03

$63.99 Dowco Standard Watercraft Cover 5200100 $63.99 Manufacturer: Dowco Dennis Kirk Part #: 56621 Dowco Standard Watercraft Cover: Manufacturer part # 5200100 - Get optimal protection from sun, moisture and mildew. Custom-fit AquaGuard covers. Water-repellent, medium-weight polyester. Secure fit with pin openings, heavy-duty tie-down looks and an electic shock-cord hem. Comes in dark blue.. 5200100 1 on hand More Info/Options for Dowco Standard Watercraft Cover 5200100

$63.99 Roetin Hi Performance X-PR1 Carbide Wear Rods XPR1-262 $63.99 Manufacturer: Roetin Dennis Kirk Part #: 032025 Roetin Hi Performance X-PR1 Carbide Wear Rods: Manufacturer part # XPR1-262 - The ideal 60 degree trail runner for performance riders. 6 1/2 in. of 60 degree carbide on a 1/2 in. diameter host bar. Four carbide wear pads for added durability. Heavy-duty 3/8 in. diameter studs (can be used with plastic ski covers).. XPR1-262 1 on hand More Info/Options for Roetin Hi Performance X-PR1 Carbide Wear Rods XPR1-262

$63.99 Carlisle Ultimax ATV Belt UA435 $63.99 Manufacturer: Carlisle Dennis Kirk Part #: 02668