TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Samson Warlord Street Sweeper Exhaust System p431218

$474.99 Yoshimura TRC Tri-Oval Slip-On Muffler with Satin-Finish Titanium Muffler Sleeve 1116277 $474.99 Manufacturer: Yoshimura Dennis Kirk Part #: 440041 Yoshimura TRC Tri-Oval Slip-On Muffler with Satin-Finish Titanium Muffler Sleeve: Manufacturer part # 1116277 - All the features of Yoshimura's race-winning TRC exhaust line now in a convenient slip-on package. The tri-oval muffler body design provides superior ground clearance and a unique exhaust note. A newly designed cone end cap features a vent system that dissipates unwanted heat from the exhaust tip; this results in increased performance. Stainless Steel tailpipe and titanium muffler, ,. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1116277 1 on hand More Info/Options for Yoshimura TRC Tri-Oval Slip-On Muffler with Satin-Finish Titanium Muffler Sleeve 1116277

$474.99 Samson Warlord Street Sweeper Exhaust System p431218 $474.99 Manufacturer: Samson Dennis Kirk Part #: 449518 Samson Warlord Street Sweeper Exhaust System: Manufacturer part # p431218 - Pure style, fit, tone and performance, from exhaust port to pipe tip. These complete exhaust systems feature a virtually seamless transition from head pipe to muffler. 1 3/4 in. head pipes with 2 1/4 in. slip-on muffler bodies; 2 1/4 in. full-coverage heat shields included. All necessary mounting hardware and brackets are included, ensuring hassle-free installation, , NOTE:. Baffles not included For 1 3/4 in. replacement baffle use H252028 For 2 in. use H252027, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. p431218 1 on hand More Info/Options for Samson Warlord Street Sweeper Exhaust System p431218

$474.99 Samson Warlord Rip Saw Exhaust System p431220 $474.99 Manufacturer: Samson Dennis Kirk Part #: 431214 Samson Warlord Rip Saw Exhaust System: Manufacturer part # p431220 - Pure style, fit, tone and performance, from exhaust port to pipe tip. These complete exhaust systems feature a virtually seamless transition from head pipe to muffler. 1 3/4 in. head pipes with 2 1/4 in. slip-on muffler bodies; 2 1/4 in. full-coverage heat shields included. All necessary mounting hardware and brackets are included, ensuring hassle-free installation, , NOTE:. Baffles not included For 1 3/4 in. replacement baffle use H252028 For 2 in. use H252027, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. p431220 2 on hand More Info/Options for Samson Warlord Rip Saw Exhaust System p431220

$474.99 Feuling Motor Oil Pump Corporation Chrome Oil Cooler Kit 2000 $474.99 Manufacturer: Feuling Motor Oil Pump Corporation Dennis Kirk Part #: 493893 Feuling Motor Oil Pump Corporation Chrome Oil Cooler Kit: Manufacturer part # 2000 - This filtration system is designed to be used as an additional filter along with your stock oil filter. Drastically reduces contamination and viscosity breakdown. Protects engine from cylinder/piston/ring/bearing wear, cylinder bore polishing and extreme oil temperatures. To take advantage of air flow off front tire, mount above voltage regulator between frame rails. Filter/cooler housing and mounting bracket, oil filter mount, braided steel lines and swivel fittings, spin-on oil filter and all necessary hardware are included. For replacement oil filter, order DK part no. 305211.. 2000 1 on hand More Info/Options for Feuling Motor Oil Pump Corporation Chrome Oil Cooler Kit 2000

$474.99 Leo Vince SBK Stainless High Mount Oval Slip-Ons With Carbon Fiber Muffler 6428 $474.99 Manufacturer: Leo Vince Dennis Kirk Part #: 4400870 Leo Vince SBK Stainless High Mount Oval Slip-Ons With Carbon Fiber Muffler : Manufacturer part # 6428 - Specifically designed to boost torque and horsepower across the rpm range while producing a rich exhaust note. Slip-ons feature stainless steel mid-pipe. TIG-welded stainless steel AISI 304 muffler body and fittings. Glossy carbon fiber muffler sleeve. Include aluminum alloy mounting strap and frame attachment brackets, , NOTE: This item ships 3 or 4 days after the order is placed. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 6428 1 on hand More Info/Options for Leo Vince SBK Stainless High Mount Oval Slip-Ons With Carbon Fiber Muffler 6428

$474.99 Jay Brake Enterprises J-FL Series Forward Controls 750JFL133 $474.99 Manufacturer: Jay Brake Enterprises Dennis Kirk Part #: 574357 Jay Brake Enterprises J-FL Series Forward Controls: Manufacturer part # 750JFL133 - The style and feel of forward controls designed specifically for baggers. Constructed of steel and billet aluminum. Utilize stock mounts, pivot points and master cylinder. Can be mounted with or without crash bar. Stock kick stand can be mounted to controls with included mounting block. All steel components have a powder-coat black finish; billet aluminum components are available with chrome or black-anodized finish. Sold as a set.. 750JFL133 1 on hand More Info/Options for Jay Brake Enterprises J-FL Series Forward Controls 750JFL133

$474.99 Samson Warlord Classic Exhaust System p449522 449534 $474.99 Manufacturer: Samson Dennis Kirk Part #: 449534 Samson Warlord Classic Exhaust System: Manufacturer part # p449522 - DennisKirk Part # 449534 - Pure style, fit, tone and performance, from exhaust port to pipe tip. These complete exhaust systems feature a virtually seamless transition from head pipe to muffler. 1 3/4 in. head pipes with 2 1/4 in. slip-on muffler bodies; 2 1/4 in. full-coverage heat shields included. All necessary mounting hardware and brackets are included, ensuring hassle-free installation. , , Included items: (1) SP06 -50 Mounting bracket, (2) 1 7/8 in. pinch clamps, (2) 5/16 in.-18 x 1 in. Hex head bolts, (2) 5/16 in. x 3/4 in. Carriage bolts, (2) 5/16 in. Nylock nuts(thick), (2) 5/16 in. Nylock nuts(thin), (4) 5/16 in. Flat washers, (2) 1/4 in.-20 x 2 3/4 in. Hex Head cap screw, (2) 1/4 in-20 nylock nuts, (1) 2/8 in.-18 x 1 3/4 in. Hex head bolt, (1) 3/8 in.-18 Nylock nut, (1) 9/16 in. x 1 in. Chrome spacer (2) 5/8 in. x 7/16 in. Chrome spacers, (6 ) #24 Hose clamps, (2) Honda Flange. NOTE: Baffles not included. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. p449522 1 on hand More Info/Options for Samson Warlord Classic Exhaust System p449522 449534

$474.99 Jay Brake Enterprises J-FL Series Forward Controls 650JFL133 $474.99 Manufacturer: Jay Brake Enterprises Dennis Kirk Part #: 573902 Jay Brake Enterprises J-FL Series Forward Controls: Manufacturer part # 650JFL133 - The style and feel of forward controls designed specifically for baggers. Constructed of steel and billet aluminum. Utilize stock mounts, pivot points and master cylinder. Can be mounted with or without crash bar. Stock kick stand can be mounted to controls with included mounting block. All steel components have a powder-coat black finish; billet aluminum components are available with chrome or black-anodized finish. Sold as a set.. 650JFL133 2 on hand More Info/Options for Jay Brake Enterprises J-FL Series Forward Controls 650JFL133

$474.99 Yoshimura Tri-Oval (TRS) Race Slip-On with Glossy Carbon Fiber Muffler Sleeve 1215262CA $474.99 Manufacturer: Yoshimura Dennis Kirk Part #: 4401249 Yoshimura Tri-Oval (TRS) Race Slip-On with Glossy Carbon Fiber Muffler Sleeve: Manufacturer part # 1215262CA - A convenient slip-on/bolt-on muffler package with the TRS race exhaust features. Tested and developed with the help of three-time AMA Superbike Champion Mat Mladin. Tri-oval muffler shape gives you maximum cornering clearance, unique looks and a distinctive sound. Race stainless steel baffle. Slip-on mufflers are quick-release For use on California models, and all 2006 models. , ,. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1215262CA 1 on hand More Info/Options for Yoshimura Tri-Oval (TRS) Race Slip-On with Glossy Carbon Fiber Muffler Sleeve 1215262CA

$474.99 Yoshimura RS-5 Slip-On Muffler with Titanium Muffler Sleeve 1225277 $474.99 Manufacturer: Yoshimura Dennis Kirk Part #: 4401317 Yoshimura RS-5 Slip-On Muffler with Titanium Muffler Sleeve: Manufacturer part # 1225277 - Yoshimura's most cutting-edge exhaust design. RS-5 slip-ons are designed to replicate the lines of the original exhaust, but give your bike the growl of its MotoGP cousin. Improved throttle response and power delivery. Features Yoshimura's trademark fit and finish and cone-style end cap. Titanium slip-on design. Includes: tailpipe, muffler, hardware and instructions Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1225277 1 on hand More Info/Options for Yoshimura RS-5 Slip-On Muffler with Titanium Muffler Sleeve 1225277

$474.99 Works Shocks Gasser Shock Absorber p582196 582229 $474.99 Manufacturer: Works Shocks Dennis Kirk Part #: 582229 Works Shocks Gasser Shock Absorber: Manufacturer part # p582196 - DennisKirk Part # 582229 - Rider weight: 125-180 lbs.. Remote resevoirs. Adjustable rate suspension . , Whether you are a motocrosser or weekend warrior, Works Performance shocks deliver maximum performance and durability. Unlike mass-produced shocks, Works builds shocks for specific types of riding and rider weight to deliver the best possible handling. In virtually all cases, shocks are designed to produce the maximum wheel travel available with the stock suspension design. Designed for typical use, including competition - for lighter-weight riders who are very aggressive we recommend the shodks rated for heavier riders. , High-pressure gas dampers feature a 1/2in. hard-chromed steel shaft and a 1 3/8in. diameter piston with 6-stage damping. Durable welded steel body with threaded pre-load adjustment. , Note: This item ships in 3-4 days after the order is placed.. p582196 1 on hand More Info/Options for Works Shocks Gasser Shock Absorber p582196 582229

$474.99 Performance Machine Rear Caliper Kit/Chrome Finish 12680052CH $474.99 Manufacturer: Performance Machine Dennis Kirk Part #: H190401 Performance Machine Rear Caliper Kit/Chrome Finish: Manufacturer part # 12680052CH - The number one name in custom brake calipers. Precision machined from billet aluminum. Calipers are four-piston dual action design for positive stopping power. Made in the U.S.A... 12680052CH 1 on hand More Info/Options for Performance Machine Rear Caliper Kit/Chrome Finish 12680052CH

$474.99 Performance Machine Rear Caliper Kit/Chrome Finish 12790052CH $474.99 Manufacturer: Performance Machine Dennis Kirk Part #: H190402 Performance Machine Rear Caliper Kit/Chrome Finish: Manufacturer part # 12790052CH - The number one name in custom brake calipers. Precision machined from billet aluminum. Calipers are four-piston dual action design for positive stopping power. Made in the U.S.A... 12790052CH 1 on hand More Info/Options for Performance Machine Rear Caliper Kit/Chrome Finish 12790052CH

$474.99 Covington Cycle City Chrome Tribal Primary Cover For BDL Belt Drives p02802 $474.99 Manufacturer: Covington Cycle City Dennis Kirk Part #: 02808 Covington Cycle City Chrome Tribal Primary Cover For BDL Belt Drives: Manufacturer part # p02802 - Constructed of CNC-machined billet aluminum. Fit standard 3" BDL drives made after June 2006. Chrome or (polished finish - 02-809).. p02802 1 on hand More Info/Options for Covington Cycle City Chrome Tribal Primary Cover For BDL Belt Drives p02802

$474.99 Terry Components Terminal Velocity III Fuel Management System p208937 $474.99 Manufacturer: Terry Components Dennis Kirk Part #: 208942 Terry Components Terminal Velocity III Fuel Management System: Manufacturer part # p208937 - Maximizes performance while decreasing emissions and fuel consumption. Horsepower and torque increases. Automatically re-calibrates for modifications made to the motorcycle such as aftermarket exhaust, air cleaner, etc.. Adjusts as you ride, compensates for changes in engine load conditions. Available for Delphi, Magneti-Marelli ECU systems and 08-09 fly-by-wire throttle models. Works in conjunction with the factory closed-loop system; some applications use factory O2 sensors, other applications include O2 sensor. Quick-connect plugs for easy installation. Works with factory and race tuner downloads. , , NOTE: Flag plug/TPS and uses factory O2 sensors. , , NOTE: Not for sale or use on California emission-equipped motorcycles.. p208937 1 on hand More Info/Options for Terry Components Terminal Velocity III Fuel Management System p208937

$474.99 Samson Warlord Classic Exhaust System 110-103 $474.99 Manufacturer: Samson Dennis Kirk Part #: 431210 Samson Warlord Classic Exhaust System: Manufacturer part # 110-103 - Pure style, fit, tone and performance, from exhaust port to pipe tip. These complete exhaust systems feature a virtually seamless transition from head pipe to muffler. 1 3/4 in. head pipes with 2 1/4 in. slip-on muffler bodies; 2 1/4 in. full-coverage heat shields included. All necessary mounting hardware and brackets are included, ensuring hassle-free installation. NOTE: Baffles not included. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 110-103 1 on hand More Info/Options for Samson Warlord Classic Exhaust System 110-103