TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Samson Warlord Classic Exhaust System p449522

$474.99 DG X2 Complete Exhaust System with Spark Arrestor 107-2145 $474.99 Manufacturer: DG Dennis Kirk Part #: 432971 DG X2 Complete Exhaust System with Spark Arrestor: Manufacturer part # 107-2145 - The most advanced 4-stroke pipe DG has ever built. Stainless steel headpipe retains heat and expels exhaust gases from the cylinder much better. Muffler body comes with billet aluminum end caps and a screen-type spark arrestor. , NOTE: For replacement spark arrestor use part number 432948. 107-2145 1 on hand More Info/Options for DG X2 Complete Exhaust System with Spark Arrestor 107-2145

$474.99 Dakar Dual-Sport Kit 94243DK $474.99 Manufacturer: Dakar Dennis Kirk Part #: 212331 Dakar Dual-Sport Kit: Manufacturer part # 94243DK - Sleek and unobtrusive; the most complete conversion kits available today. OEM-quality and DOT-approved components are rugged and lightweight -- weighing only 6lb.. Each kit includes a self-contained headlight unit, turn signals with switch and alignment shims, ignition switch and keys, tail and brake lights and switches, board, battery, wiring harness, stator wiring, complete installation instructions and fender decal. HEADLIGHT ,. Wont dim at idle. Features DOT-approved glass lens with angle adjuster and high and low beams with high-beam indicator light. Color-matched, injection-molded number plate also included. , TURN SIGNALS ,. Less likely to snag and break because their size and placement keep them out of the way. DOT-approved, motard-style lights include alignment shims for proper mounting. , ELECTRICAL COMPONENTS , Installation is simple with the model-specific wiring harness. Power and efficiency are maximized through a state-of-the-art circuit board. The 1.2A, maintenance-free, lead acid battery makes the electrical system powerful enough to keep lights burning brightly, even at idle. Multi-function handlebar switch features headlight and turn signal controls along with an integrated high-beam indicator. , The following ligting stators are recommended:, Suzuki RM-Z250 2004 part number 20-1201, Suzuki RM-Z250 2005-2006 part number 20-1282, Suzuki RM-Z450 2005-2006 part number 20-1758.. 94243DK 2 on hand More Info/Options for Dakar Dual-Sport Kit 94243DK

$474.99 Samson Warlord Long Cannon Exhaust System p431217 431256 $474.99 Manufacturer: Samson Dennis Kirk Part #: 431256 Samson Warlord Long Cannon Exhaust System: Manufacturer part # p431217 - DennisKirk Part # 431256 - Pure style, fit, tone and performance, from exhaust port to pipe tip. These complete exhaust systems feature a virtually seamless transition from head pipe to muffler. 1 3/4 in. head pipes with 2 1/4 in. slip-on muffler bodies; 2 1/4 in. full-coverage heat shields included. All necessary mounting hardware and brackets are included, ensuring hassle-free installation, , NOTE:. Baffles not included For 1 3/4 in. replacement baffle use H252028 For 2 in. use H252027, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. p431217 Expected Soon More Info/Options for Samson Warlord Long Cannon Exhaust System p431217 431256

$474.99 Samson Warlord Slasher Exhaust System p431219 449525 $474.99 Manufacturer: Samson Dennis Kirk Part #: 449525 Samson Warlord Slasher Exhaust System: Manufacturer part # p431219 - DennisKirk Part # 449525 - Pure style, fit, tone and performance, from exhaust port to pipe tip. These complete exhaust systems feature a virtually seamless transition from head pipe to muffler. 1 3/4 in. head pipes with 2 1/4 in. slip-on muffler bodies; 2 1/4 in. full-coverage heat shields included. All necessary mounting hardware and brackets are included, ensuring hassle-free installation. , , Included items:, (1) Mounting bracket, (2) 1 7/8 in. Pinch pump, (2) 5/16 in.- 18 x 1 in. Hex head bolt, (2) 5/16 in. x 3/4 in. Carriage bolts, (2) 5/16 in. Nylock nuts(thick), (2) 5/16 in. Nylock nuts(thick), (4) 5/16 in. Flat washers, (6) #24 Hose clamps, , NOTE:. Baffles not included For 1 3/4 in. replacement baffle use H252028 For 2 in. use H252027, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. p431219 Expected Soon More Info/Options for Samson Warlord Slasher Exhaust System p431219 449525

$474.99 Leo Vince SBK Stainless High Mount Oval Slip-On With Titanium Muffler 6426 $474.99 Manufacturer: Leo Vince Dennis Kirk Part #: 4400935 Leo Vince SBK Stainless High Mount Oval Slip-On With Titanium Muffler : Manufacturer part # 6426 - Specifically designed to boost torque and horsepower across the rpm range while producing a rich exhaust note. Slip-ons feature stainless steel mid-pipe. TIG-welded stainless steel AISI 304 muffler body and fittings. Satin-finish titanium muffler sleeve. Include aluminum alloy mounting strap and frame attachment brackets, , NOTE: This item ships 3 or 4 days after the order is placed. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 6426 1 on hand More Info/Options for Leo Vince SBK Stainless High Mount Oval Slip-On With Titanium Muffler 6426

$474.99 Samson Warlord Classic Exhaust System p449522 $474.99 Manufacturer: Samson Dennis Kirk Part #: 431243 Samson Warlord Classic Exhaust System: Manufacturer part # p449522 - Pure style, fit, tone and performance, from exhaust port to pipe tip. These complete exhaust systems feature a virtually seamless transition from head pipe to muffler. 1 3/4 in. head pipes with 2 1/4 in. slip-on muffler bodies; 2 1/4 in. full-coverage heat shields included. All necessary mounting hardware and brackets are included, ensuring hassle-free installation. NOTE: Baffles not included. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. p449522 Expected Soon More Info/Options for Samson Warlord Classic Exhaust System p449522

$474.99 Roadhouse Slip-On Mufflers-4 in. Diameter 56200 $474.99 Manufacturer: Roadhouse Dennis Kirk Part #: 449717 Roadhouse Slip-On Mufflers-4 in. Diameter: Manufacturer part # 56200 - Dynamometer-tested systems produce 5 to 10% horsepower increase. Produce meaty exhaust note without being too loud. Slip-fit 4 in. diameter muffler canister with polished chrome finish and interchangeable tips. Removable 2 in. core with high-temperature fiber packing. Include detailed instructions and mounting hardware. Optional interchangeable tips available for customized look (sold separately). Optional quiet performance cores also available (sold separately), , Optional/Replacement Tips: Shark fin - part no. 449703 Cadilac - part no. 449704 Repl. standard - part no. 449705, ,. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 56200 1 on hand More Info/Options for Roadhouse Slip-On Mufflers-4 in. Diameter 56200

$474.99 Terry Components Alpha N Closed-Loop Fuel Management System FM200Q $474.99 Manufacturer: Terry Components Dennis Kirk Part #: 202041 Terry Components Alpha N Closed-Loop Fuel Management System: Manufacturer part # FM200Q - Closed-loop system programs the fuel injection system while you ride. You no longer need to make constant adjustments; just hook it up and you are set to ride. Decreases emissions and fuel consumption while increasing the horsepower and torque up to 20 percent. Works with 80in., 88in., 95in., 103in., EVO, Twin Cam and V-Rod engines. Uses factory OEM sensors and attaches directly to factory ECU. Fully automatic dynamic tuning with a Robust Platinum II oxygen sensor. Factory ECU calibration, updated calibration and race-tuned calibrations are all organized by the system. Organizes the factory ignition and fuel tables by using the factory preset calibration tables. Functions by using Alpha-N rpm and throttle position system. Over-molded, sealed, surface-mounted circuit board design. Easy-to-install; quick-connect installation. Made in the U.S.A.. , , Drilling and welding required when installing the O2 sensor on some models.. FM200Q Expected Soon More Info/Options for Terry Components Alpha N Closed-Loop Fuel Management System FM200Q

$474.99 Hawg Halters Inc. Roadlok Mid Sniper Single Disc Front Caliper LHRLCC501 $474.99 Manufacturer: Hawg Halters Inc. Dennis Kirk Part #: 1901434 Hawg Halters Inc. Roadlok Mid Sniper Single Disc Front Caliper: Manufacturer part # LHRLCC501 - Now you don't have to worry about chaining or padlocking your bike. The RoadLok MID (Motorcycle Immobilization Device) has been incorporated into the HHI 500 Series 4-piston brake calipers. The RoadLok MID features X-Rod anti-drill technology, ABLOY Exec locking mechanism, a BrakeBolt hardened stainless steel locking pin, key-chain quick-connect and the ReKey key replacement program. Have the comfort of knowing your bike is safe, even when you can't keep an eye on it. 6061 billet aluminum construction with a chrome finish. Includes all mounting hardware and banjo bolt crush washers.. LHRLCC501 1 on hand More Info/Options for Hawg Halters Inc. Roadlok Mid Sniper Single Disc Front Caliper LHRLCC501

$474.99 Wiseco Complete Piston Kit WK1330 $474.99 Manufacturer: Wiseco Dennis Kirk Part #: WK1330 Wiseco Complete Piston Kit : Manufacturer part # WK1330 - Wiseco-forged high-silicon aluminum alloy pistons are computer-machined to exacting tolerances. Designed for greater strength with reduced weight and improved heat transfer. Piston kits come complete with hi-performance forged pistons (enough for one engine), rings, wrist pins, circlips and full top end gasket kit. Replacement pistons include rings and circlips. Wiseco ring types fit only Wiseco pistons and are not interchangeable (i.e., CD is not interchangeable with TD). For replacement rings, order one set per piston.. WK1330 Expected Soon More Info/Options for Wiseco Complete Piston Kit WK1330

$474.99 Yoshimura Tri-Oval Race (TRS) Slip-On Muffler w/Glossy Carbon Fiber Muffler Sleeve 1320262 $474.99 Manufacturer: Yoshimura Dennis Kirk Part #: 447306 Yoshimura Tri-Oval Race (TRS) Slip-On Muffler w/Glossy Carbon Fiber Muffler Sleeve: Manufacturer part # 1320262 - A convenient slip-on muffler package with the TRS race exhaust features. Tested and developed with the help of three-time AMA Superbike Champion Mat Mladin. Tri-oval muffler shape gives you maximum cornering clearance, unique looks and a distinctive sound. Stainless steel race baffle is large 2 in. or 2.25 in. diameter for maximum exhaust gas flow. Muffler is quick-release glossy carbon fiber, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1320262 Expected Soon More Info/Options for Yoshimura Tri-Oval Race (TRS) Slip-On Muffler w/Glossy Carbon Fiber Muffler Sleeve 1320262

$474.99 DG X2 Complete Exhaust System with Spark Arrestor 107-4160 $474.99 Manufacturer: DG Dennis Kirk Part #: 432951 DG X2 Complete Exhaust System with Spark Arrestor: Manufacturer part # 107-4160 - The most advanced 4-stroke pipe DG has ever built. Stainless steel headpipe retains heat and expels exhaust gases from the cylinder much better. Muffler body comes with billet aluminum end caps and a screen-type spark arrestor. , NOTE: For replacement spark arrestor use part number 432948. 107-4160 1 on hand More Info/Options for DG X2 Complete Exhaust System with Spark Arrestor 107-4160

$474.99 Covington Cycle City Chrome Finned Primary Cover For BDL Belt Drives p02802 $474.99 Manufacturer: Covington Cycle City Dennis Kirk Part #: 02802 Covington Cycle City Chrome Finned Primary Cover For BDL Belt Drives: Manufacturer part # p02802 - Constructed of CNC-machined billet aluminum. Fit standard 3" BDL drives made after June 2006. Chrome or (polished finish - 02-803). , , Included Items:. , 1. (1) Primary cover. , 2. (4) 5/16"-18 x 1" socket head bolts. , 3. (4) 5/16" x 1/4" spacers.. p02802 1 on hand More Info/Options for Covington Cycle City Chrome Finned Primary Cover For BDL Belt Drives p02802

$474.99 Dakar Dual-Sport Kit 94244DK $474.99 Manufacturer: Dakar Dennis Kirk Part #: 212333 Dakar Dual-Sport Kit: Manufacturer part # 94244DK - Sleek and unobtrusive; the most complete conversion kits available today. OEM-quality and DOT-approved components are rugged and lightweight -- weighing only 6lb.. Each kit includes a self-contained headlight unit, turn signals with switch and alignment shims, ignition switch and keys, tail and brake lights and switches, board, battery, wiring harness, stator wiring, complete installation instructions and fender decal. HEADLIGHT ,. Wont dim at idle. Features DOT-approved glass lens with angle adjuster and high and low beams with high-beam indicator light. Color-matched, injection-molded number plate also included. , TURN SIGNALS ,. Less likely to snag and break because their size and placement keep them out of the way. DOT-approved, motard-style lights include alignment shims for proper mounting. , ELECTRICAL COMPONENTS , Installation is simple with the model-specific wiring harness. Power and efficiency are maximized through a state-of-the-art circuit board. The 1.2A, maintenance-free, lead acid battery makes the electrical system powerful enough to keep lights burning brightly, even at idle. Multi-function handlebar switch features headlight and turn signal controls along with an integrated high-beam indicator. We recommended using the following Moose 75W lighting stators with this kit:, Kawasaki KX250F 2004 use part number 20-1201, Kawasaki KX250F 2005-2006 use part number 20-1282.. 94244DK 1 on hand More Info/Options for Dakar Dual-Sport Kit 94244DK

$474.99 Yoshimura Tri-Oval Race (TRS) Slip-On Muffler with Glossy Carbon Fiber Muffler Sleeve 1415262 $474.99 Manufacturer: Yoshimura Dennis Kirk Part #: 449484 Yoshimura Tri-Oval Race (TRS) Slip-On Muffler with Glossy Carbon Fiber Muffler Sleeve: Manufacturer part # 1415262 - A convenient slip-on muffler package with the TRS race exhaust features. Tested and developed with the help of three-time AMA Superbike Champion Mat Mladin. Tri-oval muffler shape gives you maximum cornering clearance, unique looks and a distinctive sound. Stainless steel race baffle is large 2 in. or 2.25 in. diameter for maximum exhaust gas flow. Mufflers quick-release glossy carbon fiber. Half System, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1415262 1 on hand More Info/Options for Yoshimura Tri-Oval Race (TRS) Slip-On Muffler with Glossy Carbon Fiber Muffler Sleeve 1415262

$474.99 Samson Warlord Cannon Exhaust System 110-101 $474.99 Manufacturer: Samson Dennis Kirk Part #: 431209 Samson Warlord Cannon Exhaust System: Manufacturer part # 110-101 - Pure style, fit, tone and performance, from exhaust port to pipe tip. These complete exhaust systems feature a virtually seamless transition from head pipe to muffler. 1 3/4 in. head pipes with 2 1/4 in. slip-on muffler bodies; 2 1/4 in. full-coverage heat shields included. All necessary mounting hardware and brackets are included, ensuring hassle-free installation, , Included Items: , (1) Mounting Bracket, (2) 1 7/8 in. Pinch Clamps, (2) 5/16-18 x 1 in. Hex Head Bolts, (2) 5/16 in. x 3/4 Carriage Bolts, (2) 5/16 in. Nylock Nuts (thick), (2) 5/16 in. Nylock Nuts (thin), (4) 5/16 in. Flat Washers, (2) 1/4-20 x 2 3/4 in. Hex Head Cap Screw, (2) 1/4-20 Nylock Nuts, (1) 3/8-18 x 1 3/4 in. Hex Head Bolt, (1) 3/8-18 Nylock Nut, (1) 12m x 1/25 x 1/2 in. Hex Head Bolt, (1) 9/16 in. x 1 in. Chrome Spacer, (2) 5/8 in. x 7/16 in. Chrome Spacers, (6) #24 Hose Clamps, (2) 12m x 1.25 x 1/2 in. Hex Head Bolts (used for O2 Sensor nut on pipe), , NOTE:. Baffles not included For 1 3/4 in. replacement baffle use H252028 For 2 in. use H252027, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 110-101 <