|
|
$1310.99
Akrapovic Hexagonal Slip-On Muffler with Carbon Fiber Muffler Sleeve 4402387
Dennis Kirk Part #: 4402387
Akrapovic Hexagonal Slip-On Muffler with Carbon Fiber Muffler Sleeve 4402387: Manufacturer part # SS10SO3TZC - Hexagonal canister with carbon fiber outer sleeve. Hexagonal mufflers have a carbon fiber outlet cap while the perforated inner sleeve and inlet cap are titanium. Inlet cap joint is CNC-machined and connected by tempered silicon-shielded springs. Lightweight carbon fiber muffler clamp included. Stainless steel link pipe is either conical or cylindrical based on the connection to the muffler to produce the maximum performance boost. Some mufflers include a carbon fiber heat shield. NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with any questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or Power Commander is recommended please see the Chems/Lubes section or perform a search using your make, model and year for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. , , NOTE: Akrapovic recommends you do not use any acidic cleaning solution (wheel cleaners, etc.) on this product. The use of these chemicals my lead to failure of the front rosettes. , , NOTE: This item ships 3-4 days after the order is processed. SS10SO3TZC
1 on Hand
More Info/Options for Akrapovic Hexagonal Slip-On Muffler with Carbon Fiber Muffler Sleeve 4402387
|
|
|
|
$1310.99
Akrapovic Hexagonal Slip-On Muffler with Titanium Muffler Sleeve 4402388
Dennis Kirk Part #: 4402388
Akrapovic Hexagonal Slip-On Muffler with Titanium Muffler Sleeve 4402388: Manufacturer part # SS10SO3TZT - Hexagonal canister with titanium outer sleeve. Hexagonal mufflers have a carbon fiber outlet cap while the perforated inner sleeve and inlet cap are titanium. Inlet cap joint is CNC-machined and connected by tempered silicon-shielded springs. Lightweight carbon fiber muffler clamp included. Stainless steel or titanium link pipe is either conical or cylindrical based on the connection to the muffler to produce the maximum performance boost. Some mufflers include a carbon fiber heat shield, , CAUTION: Akrapovic recommends you do not use any acidic cleaning solution (wheel cleaners, etc.) on this product. The use of these chemicals may lead to failure of the front rosette(s) , ,. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with any questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or Power Commander is recommended please see the Chems/Lubes section or perform a search using your make, model and year for products available, ,. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SS10SO3TZT
1 on Hand
More Info/Options for Akrapovic Hexagonal Slip-On Muffler with Titanium Muffler Sleeve 4402388
|
|
|
|
|
|
|
|
|
|
|
|
$1296.99
KR Tuned Titanium Slip-On Mufflers 4402580
Dennis Kirk Part #: 4402580
KR Tuned Titanium Slip-On Mufflers 4402580: Manufacturer part # 506102299 - Extreme-performance design in a slip-on package. Special canister shape is designed to hug closely to your bike to allow higher lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 506102299
1 on Hand
More Info/Options for KR Tuned Titanium Slip-On Mufflers 4402580
|
|
|
|
$1296.99
KR Tuned Carbon Fiber Slip-On Mufflers 4402581
Dennis Kirk Part #: 4402581
KR Tuned Carbon Fiber Slip-On Mufflers 4402581: Manufacturer part # 506102200 - Extreme-performance design in a slip-on package. Special canister shape is designed to hug closely to your bike to allow higher lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 506102200
1 on Hand
More Info/Options for KR Tuned Carbon Fiber Slip-On Mufflers 4402581
|
|
|
|
$1150.99
Shock Absorber/Pair Progressive Suspension Airtail I.A.S. Shocks
Dennis Kirk Part #: 588569
Shock Absorber/Pair Progressive Suspension Airtail I.A.S. Shocks: Manufacturer part # 7401002C - Integrated air and coil shock. Features height adjustments and independent firmness. The smooth ride and suspension control comes from the linear rate coil which is combined with dual-chamber air shocks. Uses inertia-valve technology to separate wheel movement from chassis movement, (I.A.S.) Inertia Active System. The bottoming control and suspension adjustment for the bike's load is provided by one air chamber; adjustment for ride height is provided by the second air chamber. Manual fill system comes standard with the shocks; an Electronic Control Center (ECC) and on-board control center that provide on-the-fly suspension control and fingertip control are optional. The ECC provides fingertip control and features independent load and ride height controls and LED pressure indicators. Adjust every aspect of your I.A.S. system with the touch of a button by combining the ECC and the on-board compressor. On-board compressor and ECC sold separately. Shocks are sold in pairs. Made in the U.S.A.. , , NOTE: "Air compressor may need" custom mounting on FL models with cruise control... 7401002C
1 on Hand
More Info/Options for Shock Absorber/Pair Progressive Suspension Airtail I.A.S. Shocks
|
|
|
|
$1287.99
Akrapovic Dual Oval Slip-On Mufflers With Carbon Fiber Muffler Sleeves 4400433
Dennis Kirk Part #: 4400433
Akrapovic Dual Oval Slip-On Mufflers With Carbon Fiber Muffler Sleeves 4400433: Manufacturer part # SD9MSO1DTC - Oval-shaped can with carbon fiber outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. Joint of the inlet cap is milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Conical or cylindrical link pipe is made titanium; shape is determined on the basis of tests of the connection of the link pipe with the muffler to obtain maximum performance increase. Carbon-fiber heat shield included, if called for in the design. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SD9MSO1DTC
1 on Hand
More Info/Options for Akrapovic Dual Oval Slip-On Mufflers With Carbon Fiber Muffler Sleeves 4400433
|
|
|
|
$1287.99
Akrapovic Dual Oval Titanium Slip-On Mufflers with Titanium Muffler Sleeves 4400434
Dennis Kirk Part #: 4400434
Akrapovic Dual Oval Titanium Slip-On Mufflers with Titanium Muffler Sleeves 4400434: Manufacturer part # SD9MSO1DTT - Oval-shaped can with titanium outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. Joint of the inlet cap is milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Conical or cylindrical link pipe is made of titanium; shape is determined on the basis of tests of the connection of the link pipe with the muffler to obtain maximum performance increase. Carbon-fiber heat shield included, if called for in the design. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SD9MSO1DTT
1 on Hand
More Info/Options for Akrapovic Dual Oval Titanium Slip-On Mufflers with Titanium Muffler Sleeves 4400434
|
|
|
|
$1287.99
Akrapovic Dual Oval Titanium Slip-On Mufflers with Titanium Muffler Sleeves 4400447
Dennis Kirk Part #: 4400447
Akrapovic Dual Oval Titanium Slip-On Mufflers with Titanium Muffler Sleeves 4400447: Manufacturer part # SH10SO2T - Oval-shaped can with titanium outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. Joint of the inlet cap is milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Conical or cylindrical link pipe is made of titanium; shape is determined on the basis of tests of the connection of the link pipe with the muffler to obtain maximum performance increase. Carbon-fiber heat shield included, if called for in the design. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SH10SO2T
1 on Hand
More Info/Options for Akrapovic Dual Oval Titanium Slip-On Mufflers with Titanium Muffler Sleeves 4400447
|
|
|
|
$1287.99
Akrapovic Dual Oval Slip-On Mufflers With Carbon Fiber Muffler Sleeves 4400446
Dennis Kirk Part #: 4400446
Akrapovic Dual Oval Slip-On Mufflers With Carbon Fiber Muffler Sleeves 4400446: Manufacturer part # SH10SO2C - Oval-shaped can with carbon fiber outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. Joint of the inlet cap is milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Conical or cylindrical link pipe is made titanium; shape is determined on the basis of tests of the connection of the link pipe with the muffler to obtain maximum performance increase. Carbon-fiber heat shield included, if called for in the design. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SH10SO2C
1 on Hand
More Info/Options for Akrapovic Dual Oval Slip-On Mufflers With Carbon Fiber Muffler Sleeves 4400446
|
|
|
|
CLOSEOUT!
Was: $1703.99
Now: $1022.39
5-Speed Transmission Power House Right Side Transmission Assembly for Custom Frame Big Twin
Dennis Kirk Part #: 149337
5-Speed Transmission Power House Right Side Transmission Assembly for Custom Frame Big Twin: Manufacturer part # 70318 - The Right Side Drive (RSD) transmission when mounted in a custom RSD frame will allow the use of super wide rear tire without offsetting the engine. 5 speed with a polished case. All transmissions listed include a chrome plated top cover, shift rod lever and hydraulic clutch actuator cover. The hydraulic clutch actuator is designed to be used with a 11/16" bore master cylinder and requires a 10mm banjo bolt. The 5-speed version includes standard ratio gears and the 6-speed includes standard ratio gears with an 86:1 ratio 6th gear. For maximum strength all gears are the same width as OEM gears. The 32 tooth pulley will accept a 1 1/2" wide drive belt. The splined main shaft is designed for a 1990/Later style clutch hub. A neutral switch and speedometer sensor block off plate are included. Smooth shifting is accomplished by bronze shift forks and a roller type shift drum detent arm. Includes a 24 month Manufacturer's Warranty. Includes Manufacturer's Statement of Origin.. 70318
1 on Hand
More Info/Options for 5-Speed Transmission Power House Right Side Transmission Assembly for Custom Frame Big Twin
|
|
|
|
|
|
$noprice
S&S 88 in./95 in. Cam, Pushrod and Induction Hot Set-Up Kit 140196
Dennis Kirk Part #: 140196
S&S 88 in./95 in. Cam, Pushrod and Induction Hot Set-Up Kit 140196: Inexpensive way to boost power from 88 in. and 95 in. Twin Cam engines with stock heads and valve springs. Include S&S adjustable pushrods and pushrod tube kit, 510 cam kit, bearings, gaskets and instructions. Carbureted kits also include an S&S Super E carburetor kit. Fuel-injected kits also include an S&S high-flow air cleaner kit that bolts directly to the Delphi throttle body. Made in the U.S.A.. NOTE: This project requires a skilled technician. It is the responsibility of the person assembling the parts to check all clearances and assembly specifications. NOTE: This item ships 3 or 4 days after the order is placed.
1 on Hand
More Info/Options for S&S 88 in./95 in. Cam, Pushrod and Induction Hot Set-Up Kit 140196
|
|
|
|
$noprice
S&S Stroker Kit - 106 in. Twin Cam A Motor 149296
Dennis Kirk Part #: 149296
S&S Stroker Kit - 106 in. Twin Cam A Motor 149296: Manufacturer part # 322490 - Economical way to increase horsepower and torque. Include assembled flywheels with shafts and instructions. Do not require any motor case modification; cylinders must be bored to 3 7/8 in.. For Twin Cam A motors. Piston kits sold separately, part numbers listed below). Made in the U.S.A.. NOTE: This project requires a skilled technician. It is the responsibility of the person assembling the parts to check all clearances and assembly specifications., , Piston Kits (pairs). + .005" part no. 13119405. + .010" part no. 1311941. + .020" part no. 1311942. NOTE: This item ships in 3-4 days after the order is placed.. 322490
1 on Hand
More Info/Options for S&S Stroker Kit - 106 in. Twin Cam A Motor 149296
|
|
|
|
$1258.99
Custom Valley Rear Fenders for 200mm Wide Drive Kits 392837
Dennis Kirk Part #: 392837
Custom Valley Rear Fenders for 200mm Wide Drive Kits 392837: 14-gauge stamped-steel fender. Looks almost like an OEM fender fitting right inside the frame, just like stock. In addition to the stock-appearing rear fender there are a couple of other fender options available. An optional smooth version so you can do whatever you want with the look and lighting. An optional custom-style which features an LED taillight and frenched licensed plate. , , NOTE: Replacement fenders for wide drive kits Part Nos. 494832, 494833, 494834, 492393, 492392 and 492391. , , This item ships 3-4 business days after order is placed.
1 on Hand
More Info/Options for Custom Valley Rear Fenders for 200mm Wide Drive Kits 392837
|
|
|
|
|
|
|
|
$1255.95
RC Components Eclipse Savage One-Piece Forged Aluminum Front Wheel 554745
Dennis Kirk Part #: 554745
RC Components Eclipse Savage One-Piece Forged Aluminum Front Wheel 554745: Made from the highest-quality forged aluminum to create a strong and durable wheel. CNC-machined and quality tested to ensure finest product possible. Matching belt pulleys and brake rotors available to create a custom package. Made in the U.S.A.. NOTE: Custom wheels have a wider than stock hub and require custom spacing. NOTE: All rear wheels use RC Components 108z bolt pattern Sportbike Sprockets, sold separately. NOTE: Suzuki GSX1300R Hayabusa custom application.
| |
