TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Factory Effex Evo 5 Series Graphic Kit p5200384 5200368

$66.99 Factory Effex Evo-4 Series Graphic Kit 10-01504 $66.99 Manufacturer: Factory Effex Dennis Kirk Part #: 529870 Factory Effex Evo-4 Series Graphic Kit: Manufacturer part # 10-01504 - Durable, scratch-proof 16-mil ultracurve vinyl is four times thicker than stock. Precut kits have special gas tank adhesive and anti-snag tabs. Kits include pieces for both sides of shroud, gas tank and airbox. , , NOTES: Includes graphics for shroud, tank, and front and rear fenders. 10-01504 2 on hand More Info/Options for Factory Effex Evo-4 Series Graphic Kit 10-01504

$66.99 Cycle Visions 5/8 in. Pulley/Sprocket Adapter CV2005 $66.99 Manufacturer: Cycle Visions Dennis Kirk Part #: 805408 Cycle Visions 5/8 in. Pulley/Sprocket Adapter: Manufacturer part # CV2005 - Made from 6061 T-6 aluminum and feature a machined finish. All spacers are flanged for perfect alignment. 80-4997 allows you to use late-model 1 1/8" pulley on early-style wheel. 80-4998 and 80-4999 allow the use of any combination of early- or late-style wheel, pulley or sprocket combination. NOTE: May require longer bolts.. CV2005 1 on hand More Info/Options for Cycle Visions 5/8 in. Pulley/Sprocket Adapter CV2005

$66.99 Devol Engineering Glide Plate KX3101 $66.99 Manufacturer: Devol Engineering Dennis Kirk Part #: 491350 Devol Engineering Glide Plate: Manufacturer part # KX3101 - Tough plate protects your engine from rocks and debris and has the strongest mounting system on the market. Strong 6061 T-6 aluminum alloy. Convenient oil drainage holes. Protect the full-frame rail and rear cross member. KX3101 1 on hand More Info/Options for Devol Engineering Glide Plate KX3101

$66.99 Works Connection MX Skid Plate 10006 $66.99 Manufacturer: Works Connection Dennis Kirk Part #: 513284 Works Connection MX Skid Plate: Manufacturer part # 10006 - Made from 6061-T6 aluminum. Each plate is custom-made for each model ensuring secure fit and finish. Built-in oil drain access hole. Factory foam included.. 10006 1 on hand More Info/Options for Works Connection MX Skid Plate 10006

$66.99 Devol Engineering Glide Plate KXF0104 $66.99 Manufacturer: Devol Engineering Dennis Kirk Part #: 493387 Devol Engineering Glide Plate: Manufacturer part # KXF0104 - Tough plate protects your engine from rocks and debris, and has the strongest mounting system on the market. Strong 6061 T-6 aluminum alloy. Convenient oil drainage holes. Protect the full-frame rail and rear cross member.. KXF0104 1 on hand More Info/Options for Devol Engineering Glide Plate KXF0104

$66.99 Sportech The Back Thing BACKTHING 347284M $66.99 Manufacturer: Sportech Dennis Kirk Part #: 347284M Sportech The Back Thing: Manufacturer part # BACKTHING - DennisKirk Part # 347284M - The legendary BackThing provides flexible full lumbar support that conforms to your spine. Made from all-directional stretch neoprene, BackThing stays in place and will not ride up and dig into your ribs. Therapeutic heat (from your body) is retained and directed into the soft tissue of your lowwer back - feels like a massage. Does not restrict movement. Dual-wrap design lets you snug up the side pulls to adjust the lumbar support pad in the small of your back. NOTE: There is no provision for heat packs in this belt. The retain heat is from your body.. BACKTHING More than 10 on hand More Info/Options for Sportech The Back Thing BACKTHING 347284M

$66.99 Accutronix 8-Ball Shifter Ball p573918 $66.99 Manufacturer: Accutronix Dennis Kirk Part #: 573918 Accutronix 8-Ball Shifter Ball: Manufacturer part # p573918 - High-quality casting resin shifter balls. Colors will not wear or scratch off. 2 1/8" diameter. Solid brass fittings with 1/2"-20 threads. Come with 3/8"-16 brass adapter. For all shifters utilizing either of these fitting sizes.. p573918 2 on hand More Info/Options for Accutronix 8-Ball Shifter Ball p573918

$66.99 Works Connection MX Skid Plate 10092 $66.99 Manufacturer: Works Connection Dennis Kirk Part #: 515156 Works Connection MX Skid Plate: Manufacturer part # 10092 - Each plate is custom-made for each model ensuring secure fit and finish. Built-in oil drain access hole. Factory foam included.. 10092 1 on hand More Info/Options for Works Connection MX Skid Plate 10092

$66.99 Sno-Stuff X-Calibar III Carbide Wear Rods 506-429 $66.99 Manufacturer: Sno-Stuff Dennis Kirk Part #: 031369 Sno-Stuff X-Calibar III Carbide Wear Rods: Manufacturer part # 506-429 - From Sno-Stuff, the original X-Calibar carbide wear rods. Bars feature various lengths of 60º center carbide for control, hardweld filler sections for durability, and some have carbide wear pads for even more wear resistance. Longer studs work with ski skins. X-Calibar III features six inches of 60º center carbide. 1 1/4 in. carbide wear pads front and rear. , NOTE: , Some models require drilling extra hole(s) in skis to mount carbides, , NOTE: , Wear rods replace the originals exactly on all models except those with E-Z Steer either as original equipment or installed later. For those models, the wear rods listed replace both the plate and the 2-stud, 14 3/4 in. wear rod with a 3-stud, 28 in. design. If you wish to retain the E-Z Steer plate, order part number 10533 for an X-Calibar I or part number 10610 for an X-Calibar III Plus design with 5 in. or 60º carbide. Both are 14 3/4 in. long. 506-429 10 on hand More Info/Options for Sno-Stuff X-Calibar III Carbide Wear Rods 506-429

$66.99 Magnum Sterling Chromite II Swivel-Fit Single Disc Front Brake Line p1902465 1902468 $66.99 Manufacturer: Magnum Dennis Kirk Part #: 1902468 Magnum Sterling Chromite II Swivel-Fit Single Disc Front Brake Line: Manufacturer part # p1902465 - DennisKirk Part # 1902468 - Swivel-Fit design offers custom style with unmatched adaptability and fit. Sleek, factory-crimped polished chrome fittings. Swivel fitting is tucked under the lower triple-tree; corrects banjo orientation which eliminates kinking in the braided line. Constructed of Kevlar for extreme high-performance/safety ratings and dramatically reduced line expansion for improved lever feel. Covered with a crystal clear Teflon outer jacket for impressive protection against scuffing; outer jacket will never discolor. Three lower section lengths available to cover most stock fork applications. Lines use 7/16 in. banjo fittings at the master cylinder and 90 degree 3/8 in. banjo fittings at the caliper. Exceeds all DOT FMVSS-106 specifications. Made in the U.S.A., , Included Items:, 1. (1) Brake line 50 in. with one 10mm 90 degree banjo and one 12mm 90 straight banjo fitting, 2. (2) 10mm crush washers, 3. (2) 12mm crush washers, 4. (1) Mounting clamp, , Stock Application Chart SOFTAIL FXST 00-06 , Total Length: 46 in., Lower Section Length: 22 in., Banjo Angle: 35 degree, Polished Stainless - #1902372, Black Pearl - #1902291, FXST/C 84-99 , Total Length: 48 in., Lower Section Length: 22 in., Banjo Angle: 180 degree, Sterling Chromite II - #1902465, FXSTC 07-08 , Total Length: 50 in., Lower Section Length: 22 in., Banjo Angle: 180 degree, Polished Stainless - #1902410, Black Pearl - #1902329, Sterling Chromite II - #1902467, FXSTD 00-07 , Total Length: 46 in., Lower Section Length: 22 in., Banjo Angle: 35 degree, Polished Stainless - #1902372, Black Pearl - #1902291, Sterling Chromite II - #1902429, FLST/F/C 87-07, FLSTN 93-96 , Total Length: 45 in., Lower Section Length: 20 in.,Banjo Angle: 35 degree, Polished Stainless - #1902369, Black Pearl - #1902288, Sterling Chromite II - #1902426 DYNA FXD 00-05 , Total Length: 40 in., Lower Section Length: 20 in., Banjo Angle: 35 degree, Sterling Chromite II - #1902424, Polished Stainless - #1902367, Black Pearl - #1902286, FXDB, FXDC, FXDL 92-05 , Total Length: 40 in., Lower Section Length: 20 in., Banjo Angle: 35 degree, Sterling Chromite II - #1902424, Polished Stainless - #1902367, Black Pearl - #1902286, FXDWG 06-07 , Total Length: 50 in., Lower Section Length: 24 in., Banjo Angle: 180 degree, Sterling Chromite II - #1902468, Polished Stainless - #1902411, Black Pearl - #1902330, FXDWG 93-05 , Total Length: 48 in., Lower Section Length: 22 in., Banjo Angle: 180 degree, Sterling Chromite II - #1902465, Polished Stainless - #1902408, Black Pearl - #1902327 XL XLH 86-91, XL883 Hugger 1987 , Total Length: 42 in., Lower Section Length: 20 in., Banjo Angle: 180 degree, Sterling Chromite II - #1902465. p1902465 1 on hand More Info/Options for Magnum Sterling Chromite II Swivel-Fit Single Disc Front Brake Line p1902465 1902468

$66.99 Nelson-Rigg Survivor 200 Roll Bag SVT200 $66.99 Manufacturer: Nelson-Rigg Dennis Kirk Part #: 507404 Nelson-Rigg Survivor 200 Roll Bag: Manufacturer part # SVT200 - Pockets on each side close with hook-and-loop tabs. Extra-large, heavy-duty zippers with pull fobs are reliable and easy to open and close, even with gloves. Strategically placed rivets for strength and reliability. Compatible with SVT-1000 and SVT-300. Measures 15 1/2 in. L x 9 in. D.. SVT200 1 on hand More Info/Options for Nelson-Rigg Survivor 200 Roll Bag SVT200

$66.99 Devol Engineering Gas Cap GCH01B $66.99 Manufacturer: Devol Engineering Dennis Kirk Part #: 183500 Devol Engineering Gas Cap: Manufacturer part # GCH01B - Add a good-looking new accessory to your tank. Features a strong CNC-milled billet aluminum body with milled tops and polished sides. Built-in air vent hose with check valve.. GCH01B 1 on hand More Info/Options for Devol Engineering Gas Cap GCH01B

$66.99 Devol Engineering Gas Cap GCY01B $66.99 Manufacturer: Devol Engineering Dennis Kirk Part #: 183504 Devol Engineering Gas Cap: Manufacturer part # GCY01B - Add a good-looking new accessory to your tank. Features a strong CNC-milled billet aluminum body with milled tops and polished sides. Built-in air vent hose with check valve.. GCY01B 1 on hand More Info/Options for Devol Engineering Gas Cap GCY01B

$66.99 K & N Factory-Style Filter Element BM-6501 $66.99 Manufacturer: K & N Dennis Kirk Part #: 303772 K & N Factory-Style Filter Element: Manufacturer part # BM-6501 - NON-RESTRICTIVE - dust and dirt will not clog the filter because they remain on the outside of the element. FREE-FLOWING - despite the outer layer of trapped dust and dirt, air flow between the particles remains virtually unaffected. MOISTURE-RESISTANT - moisture will not clog the oil-saturated element, even completely wet, the filter will allow the engine to breathe freely. MINIMAL-SERVICE - because dirt particles that build up on the outside of the element actually aid in the filtering action, frequent cleaning is not required. Unaffected by pollution control devices - oil breather blow-by is absorbed in the fabric without effect. , All K & N air filters must be treated with filter oil before installation .. BM-6501 1 on hand More Info/Options for K & N Factory-Style Filter Element BM-6501

$66.99 Gears Genesis Tank Bag p507030 $66.99 Manufacturer: Gears Dennis Kirk Part #: 507030 Gears Genesis Tank Bag: Manufacturer part # p507030 - Designed to match the lines of modern plastic gas tanks. Made of durable 1200-denier Technolast water-resistant, UV-treated polyester. Spacious main compartment and two low profile side pockets. Features an inner mesh pocket, key ring holder and pen holder. Bad easily lifts to allow access to the gas cap without removing suction cups. Rubber, easy-grip handle. Includes waterproof rain cover. Patented suction cup design offers secure mounting. Measures 12 in. L x 9.5 in. W x 6.2 in. H (rear) and 3 in. (front).. p507030 1 on hand More Info/Options for Gears Genesis Tank Bag p507030

$66.99 Works Connection MX Skid Plate 10216 $66.99 Manufacturer: Works Connection Dennis Kirk Part #: 49808 Works Connection MX Skid Plate: Manufacturer part # 10216 - Each plate is custom-made for each model ensuring secure fit and finish. Built-in oil drain access hole. Factory foam included.. 10216 3 on hand More Info/Options for Works Connection MX Skid Plate 10216

$66.99 Biketronics Plug-In Lighting Controls BT300X $66.99 Manufacturer: Biketronics Dennis Kirk Part #: 211162 Biketronics Plug-In Lighting Controls: Manufacturer part # BT300X - Tailbones converter adds running light and stoplight function to rear turn signals. Compact and heavy-duty, these lighting controls are made to work on all Harleys with or without OEM alarm. Designed by an electrical engineer who literally (wrote the book) on designing-in reliability. LED or custom turn signals can be used. Additional load equalizers not required on FrontRunner and TailBones. Replacement hardware used to remove OEM front signals found on Dresser models included with BlinkerSpot. Easy plug-in installation on XL 04-08 models. American engineered and manufactured.. BT300X 1 on hand More Info/Options for Biketronics Plug-In Lighting Controls BT300X

$66.99 Barnett Platinum Series Idle/Cruise Cable 35802PS6 $66.99 Manufacturer: Barnett Dennis Kirk Part #: 199836 Barnett Platinum Series Idle/Cruise Cable: Manufacturer part # 35802PS6 - Smooth-working, durable, made with the finest components available and virtually indestructible; these can only describe Barnett cables. Platinum Series cables feature a bright, silver-plated braided cover. Clutch cables available with standard nylon-lined, PVC-coated casings or in easy-pull high-efficiency design. 45" long (+6"). 90 degree elbow. , , NOTE: , Length given is that of the outer housing only, excluding elbows and/or adjusters, , For models listed with cruise control. 35802PS6 1 on hand More Info/Options for Barnett Platinum Series Idle/Cruise Cable 35802PS6

$66.99 Magnum Sterling C