TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Samson Warlord Classic Exhaust System p449522 431249

CLEARANCE! Was: $635.99 Now: $476.99 Leo Vince SBK Factory Stainless Slip-On With Titanium Muffler 7123 $476.99 Manufacturer: Leo Vince Dennis Kirk Part #: 4400864 Leo Vince SBK Factory Stainless Slip-On With Titanium Muffler: Manufacturer part # 7123 - Convenient slip-on design feature streamlined muffler body for maximum performance gains. Lightweight titanium muffler with satin-finish titanium muffler sleeve. Titanium mid-pipe. Carbon fiber muffler strap with stainless steel mounting hardware. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 7123 2 on hand More Info/Options for Leo Vince SBK Factory Stainless Slip-On With Titanium Muffler 7123

$476.99 Arlen Ness Jagged Ness-Tech 1 1/2 in. 70T Billet Pulley 16-603 $476.99 Manufacturer: Arlen Ness Dennis Kirk Part #: 805374 Arlen Ness Jagged Ness-Tech 1 1/2 in. 70T Billet Pulley: Manufacturer part # 16-603 - Precision-machined from a single piece of 6061 T-6 aluminum and then polished and chrome plated. Features machined design on both sides of the pulley. Includes an adapter ring to allow mounting on most 86-06 style wheels. Matches the Ness-Tech® billet wheels and rotors. Forged and machined in the U.S.A.. NOTE: This item ships in 3-4 days after the order is placed.. 16-603 1 on hand More Info/Options for Arlen Ness Jagged Ness-Tech 1 1/2 in. 70T Billet Pulley 16-603

$476.99 Arlen Ness Hammer Ness-Tech 1 1/2 in. 65T Billet Pulley 16-750 $476.99 Manufacturer: Arlen Ness Dennis Kirk Part #: 805366 Arlen Ness Hammer Ness-Tech 1 1/2 in. 65T Billet Pulley: Manufacturer part # 16-750 - Precision-machined from a single piece of 6061 T-6 aluminum and then polished and chrome plated. Features machined design on both sides of the pulley. Includes an adapter ring to allow mounting on most 86-06 style wheels. Matches the Ness-Tech® billet wheels and rotors. Forged and machined in the U.S.A.. NOTE: This item ships in 3-4 days after the order is placed.. 16-750 1 on hand More Info/Options for Arlen Ness Hammer Ness-Tech 1 1/2 in. 65T Billet Pulley 16-750

$476.99 Nolan X-602 Casey Stoner Phillip Island Replica Helmet prod2070005 3302530XL $476.99 Manufacturer: Nolan Dennis Kirk Part #: 3302530XL Nolan X-602 Casey Stoner Phillip Island Replica Helmet: Manufacturer part # prod2070005 - DennisKirk Part # 3302530XL - DOT and ECE-2205 certified. Aerodynamic and lightweight composite fiber shell (carbon, Kevlar, Kural and fiberglass). Dual air intakes and a rear exhaust that's integrated into the spoiler combine to efficiently flow air. Lexan face shield features UV400 protection to block 100% of UV rays. Shield mechanism securely fixes the shield closed or slightly open; also allows tool-less quick change. Vents integrated into the chin bar allow air to flow over the face shield for efficient defogging. Anti-fog inserts are made of 100% anti-fog material. Fully-removable liner is anti-bacterial, anti-fungal, hypoallergenic, machine washable and is made of sweat-wicking material. Cheek pads are fully removable. Double D-ring retention.. prod2070005 1 on hand More Info/Options for Nolan X-602 Casey Stoner Phillip Island Replica Helmet prod2070005 3302530XL

$475.99 Belt Drives LTD Rear Clutch Basket w/ Bearing and 69 tooth ring gear for SS-2 2 in. Belt Drive SS69RP $475.99 Manufacturer: Belt Drives LTD Dennis Kirk Part #: 02684 Belt Drives LTD Rear Clutch Basket w/ Bearing and 69 tooth ring gear for SS-2 2 in. Belt Drive: Manufacturer part # SS69RP - Rear clutch basket with bearing ring gear 69 tooth for SS-2 2 inch belt drive; Part No. 02-673.. SS69RP 1 on hand More Info/Options for Belt Drives LTD Rear Clutch Basket w/ Bearing and 69 tooth ring gear for SS-2 2 in. Belt Drive SS69RP

$475.99 WSM Crankshaft Rebuild Kit p149240 131341 $475.99 Manufacturer: WSM Dennis Kirk Part #: 131341 WSM Crankshaft Rebuild Kit: Manufacturer part # p149240 - DennisKirk Part # 131341 - Complete kits include connecting rods, bottom pin, thrust washers, top and bottom bearings, webs if applicable, oil seals, O-rings and machined bearings with set pin holes or pins when applicable. Highest-quality bearings for 2-stroke crankshaft applications.. p149240 1 on hand More Info/Options for WSM Crankshaft Rebuild Kit p149240 131341

$475.99 Vance & Hines Longshot HS 18511 $475.99 Manufacturer: Vance & Hines Dennis Kirk Part #: 449561 Vance & Hines Longshot HS: Manufacturer part # 18511 - 2.5 in. full-coverage header and muffler heat shields are virtually blue-proof. Features the traditional Vance & Hines hot-rod sound. New scalloped slash-cut ends. Removable baffles and mounting hardware included. Made in the U.S.A., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture. Please consult the exhaust manufacturer directly with questions regarding any modifications that may be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore is not covered ny any warranty. See Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 18511 3 on hand More Info/Options for Vance & Hines Longshot HS 18511

$475.99 Thunder Designs Side-Mount Taillight License Plate Assembly TC-142 $475.99 Manufacturer: Thunder Designs Dennis Kirk Part #: H21428 Thunder Designs Side-Mount Taillight License Plate Assembly: Manufacturer part # TC-142 - License plate bracket made of chrome billet aluminum features LED lights. Attaches to the left side of the swingarm. Choose from oval flat or inside radius style. Mounting brackets fit most Softail models, , Dimensions: , Outside(overall): 9 3/8 in. x 4 1/2 in., Window size: 6 9/16 x 3 3/4 in.. Mounting Brackets: , H21-429: Side swingarm bracket for 1-1/8 in. tube. H21-430: Side swingarm bracket for 1-1/4 in. tube. H21-431: Side swingarm bracket for 1-3/16 in. tube. H21-432: Side swingarm bracket for 1-1/2 in. tube. TC-142 1 on hand More Info/Options for Thunder Designs Side-Mount Taillight License Plate Assembly TC-142

$475.95 Cobra True Duals Classic Exhaust Systems w/Billet Tips 4368 $475.95 Manufacturer: Cobra Dennis Kirk Part #: 4400275 Cobra True Duals Classic Exhaust Systems w/Billet Tips: Manufacturer part # 4368 - This True-dual Classic system increases performance without the weight. Features full-length 2.5 in. heat shields with no bluing. 4 in. muffler bodies with proprietary technology. Deep but quiet sound. Highly polished chromed billet tips complete this great deep, quiet system. Baffles are removable, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 4368 1 on hand More Info/Options for Cobra True Duals Classic Exhaust Systems w/Billet Tips 4368

$474.99 Works Shocks Gasser Shock Absorber p582196 582230 $474.99 Manufacturer: Works Shocks Dennis Kirk Part #: 582230 Works Shocks Gasser Shock Absorber: Manufacturer part # p582196 - DennisKirk Part # 582230 - Rider weight: 190-240 lbs.. Remote resevoirs. Adjustable rate suspension . , Whether you are a motocrosser or weekend warrior, Works Performance shocks deliver maximum performance and durability. Unlike mass-produced shocks, Works builds shocks for specific types of riding and rider weight to deliver the best possible handling. In virtually all cases, shocks are designed to produce the maximum wheel travel available with the stock suspension design. Designed for typical use, including competition - for lighter-weight riders who are very aggressive we recommend the shodks rated for heavier riders. , High-pressure gas dampers feature a 1/2in. hard-chromed steel shaft and a 1 3/8in. diameter piston with 6-stage damping. Durable welded steel body with threaded pre-load adjustment. , Note: This item ships in 3-4 days after the order is placed.. p582196 1 on hand More Info/Options for Works Shocks Gasser Shock Absorber p582196 582230

$474.99 Covington Cycle City Chrome Toxic Primary Cover For BDL Belt Drives p02802 $474.99 Manufacturer: Covington Cycle City Dennis Kirk Part #: 02806 Covington Cycle City Chrome Toxic Primary Cover For BDL Belt Drives: Manufacturer part # p02802 - Constructed of CNC-machined billet aluminum. Fit standard 3" BDL drives made after June 2006. Chrome or (polished finish - 02-807), , Included Items: , (1) Primary Cover, (4) 5/16 in.-18 x 1 in. Socket head bolts, (4) 1/4 in. Spacer washers. p02802 1 on hand More Info/Options for Covington Cycle City Chrome Toxic Primary Cover For BDL Belt Drives p02802

$474.99 Terry Components Terminal Velocity III Fuel Management System p208937 208940 $474.99 Manufacturer: Terry Components Dennis Kirk Part #: 208940 Terry Components Terminal Velocity III Fuel Management System: Manufacturer part # p208937 - DennisKirk Part # 208940 - Maximizes performance while decreasing emissions and fuel consumption. Horsepower and torque increases. Automatically re-calibrates for modifications made to the motorcycle such as aftermarket exhaust, air cleaner, etc.. Adjusts as you ride, compensates for changes in engine load conditions. Available for Delphi, Magneti-Marelli ECU systems and 08-09 fly-by-wire throttle models. Works in conjunction with the factory closed-loop system; some applications use factory O2 sensors, other applications include O2 sensor. Quick-connect plugs for easy installation. Works with factory and race tuner downloads. , , NOTE: Round plug/TPS and uses factory O2 sensors. , , NOTE: Not for sale or use on California emission-equipped motorcycles.. p208937 3 on hand More Info/Options for Terry Components Terminal Velocity III Fuel Management System p208937 208940

$474.99 Yoshimura Tri-Oval Race (TRS) Slip-On Muffler w/Glossy Carbon Fiber Muffler Sleeve 1111262 $474.99 Manufacturer: Yoshimura Dennis Kirk Part #: 449274 Yoshimura Tri-Oval Race (TRS) Slip-On Muffler w/Glossy Carbon Fiber Muffler Sleeve: Manufacturer part # 1111262 - A convenient slip-on muffler package with the TRS race exhaust features. Tested and developed with the help of three-time AMA Superbike Champion Mat Mladin. Tri-oval muffler shape gives you maximum cornering clearance, unique looks and a distinctive sound. Slip-on style. Stainless steel race baffle is large 2 in. or 2.25 in. diameter for maximum exhaust gas flow. Slip-on mufflers are quick-release glossy carbon fiber. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1111262 1 on hand More Info/Options for Yoshimura Tri-Oval Race (TRS) Slip-On Muffler w/Glossy Carbon Fiber Muffler Sleeve 1111262

$474.99 Samson Warlord Street Sweeper Exhaust System p431218 449530 $474.99 Manufacturer: Samson Dennis Kirk Part #: 449530 Samson Warlord Street Sweeper Exhaust System: Manufacturer part # p431218 - DennisKirk Part # 449530 - Pure style, fit, tone and performance, from exhaust port to pipe tip. These complete exhaust systems feature a virtually seamless transition from head pipe to muffler. 1 3/4 in. head pipes with 2 1/4 in. slip-on muffler bodies; 2 1/4 in. full-coverage heat shields included. All necessary mounting hardware and brackets are included, ensuring hassle-free installation. , , Included items:, (1) Mounting bracket, (2) 1 7/8 in. Pinch pump, (2) 5/16 in.- 18 x 1 in. Hex head bolt, (2) 5/16 in. x 3/4 in. Carriage bolts, (2) 5/16 in. Nylock nuts(thick), (2) 5/16 in. Nylock nuts(thick), (4) 5/16 in. Flat washers, (6) #24 Hose clamps, , NOTE:. Baffles not included For 1 3/4 in. replacement baffle use H252028 For 2 in. use H252027, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. p431218 1 on hand More Info/Options for Samson Warlord Street Sweeper Exhaust System p431218 449530

$474.99 Samson Warlord Rip Saw Exhaust System p431220 431253 $474.99 Manufacturer: Samson Dennis Kirk Part #: 431253 Samson Warlord Rip Saw Exhaust System: Manufacturer part # p431220 - DennisKirk Part # 431253 - Pure style, fit, tone and performance, from exhaust port to pipe tip. These complete exhaust systems feature a virtually seamless transition from head pipe to muffler. 1 3/4 in. head pipes with 2 1/4 in. slip-on muffler bodies; 2 1/4 in. full-coverage heat shields included. All necessary mounting hardware and brackets are included, ensuring hassle-free installation, , NOTE:. Baffles not included For 1 3/4 in. replacement baffle use H252028 For 2 in. use H252027, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. p431220 1 on hand More Info/Options for Samson Warlord Rip Saw Exhaust System p431220 431253

$474.99 Samson 2 into 1 Thunder Pro Exhaust System p4401105 4401107 $474.99 Manufacturer: Samson Dennis Kirk Part #: 4401107 Samson 2 into 1 Thunder Pro Exhaust System: Manufacturer part # p4401105 - DennisKirk Part # 4401107 - Performance gains and a deep, powerful tone from 2-into-1 system. Lighter weight than comparable systems. Quicker throttle response with increased torque and horsepower from the patented Veritech baffle. Made in the U.S.A.. , , Included Items: , (1) SP06-90 Mounting Bracket, (1) 5/16-18" x 3/4" Carriage Bolt, (1) 5/16" Nylock Nut, (1) 7/16" Lock Washers, (6) #24 Hose Clamps, (2) #44 Hose Clamps, (1) 1/4-20 x 3/8" Allen Head Bolt, (1) 10-32 x 3/8" Allen Head Bolt, (1) A-230 End Cap, (1) SP04-19 Baffle, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. p4401105 1 on hand More Info/Options for Samson 2 into 1 Thunder Pro Exhaust System p4401105 4401107

$474.99 Samson Warlord Classic Exhaust System p449522 449516 $474.99 Manufacturer: Samson Dennis Kirk Part #: 449516 Samson Warlord Classic Exhaust System: Manufacturer part # p449522 - DennisKirk Part # 449516 - Pure style, fit, tone and performance, from exhaust port to pipe tip. These complete exhaust systems feature a virtually seamless transition from head pipe to muffler. 1 3/4 in. head pipes with 2 1/4 in. slip-on muffler bodies; 2 1/4 in. full-coverage heat shie