TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Magnum Swivel-Fit Single Disc Front Brake Line p1902321

$68.99 Slip Streamer Windshield for HD Touring Fairings 13516 $68.99 Manufacturer: Slip Streamer Dennis Kirk Part #: 230430 Slip Streamer Windshield for HD Touring Fairings: Manufacturer part # 13516 - Constructed from 3/16 in. ICI acrylic-the industry leader in clarity and quality. Windshield material is .052 in. thicker than OE for more strength. Stronger windshield construction means less shield movement and better airflow. Small scratches in shield can be repaired with commercial cleaners and polishes. Available in a wide range of shield heights so you can customize your level of protection.. 13516 1 on hand More Info/Options for Slip Streamer Windshield for HD Touring Fairings 13516

$68.99 Kimpex OEM Type Replacement Steel Ski 08-348 $68.99 Manufacturer: Kimpex Dennis Kirk Part #: 105986 Kimpex OEM Type Replacement Steel Ski: Manufacturer part # 08-348 - Made in the U.S.A. of high-quality steel, Kimpex skis offer optimum reliability and performance. All match original equipment or are very similar in design, appearance and fit Wear rod not included -- use the original wear rod except as noted. Durable, high-gloss black finish.. 08-348 More than 10 on hand More Info/Options for Kimpex OEM Type Replacement Steel Ski 08-348

$68.99 Cometic Top End Gasket Set C7732 $68.99 Manufacturer: Cometic Dennis Kirk Part #: 262091 Cometic Top End Gasket Set: Manufacturer part # C7732 - All Cometic top-end gasket kits are complete with head and base gaskets. Cometic graphite head gaskets are manufactured from non-asbestos flexible graphite laminated to a stainless steel core. Cometic graphite material is impervious to fuels, coolants and oils. Maximum seal and flexibility is obtained with excellent torqure retention. MLS head gaskets are made from Viton-coated stainless steal material and feature and embossed gasket design that is ideal for high combustion pressures and lightweight engines. C7732 1 on hand More Info/Options for Cometic Top End Gasket Set C7732

$68.99 Kuryakyn Premium ISO-Grips with Chrome Accent 6212 $68.99 Manufacturer: Kuryakyn Dennis Kirk Part #: H59043 Kuryakyn Premium ISO-Grips with Chrome Accent: Manufacturer part # 6212 - This grip combines the state of the art vibration absorbing properties of the standard ISO-Grip with the fatigue reducing comfort of our ISO-Throttle Boss. Because of their unique removable end caps, this is one of the only custom grips available that may be used with stock air reservoir type handlebars. ISO-Grips will replace stock dual cable grips from 82 and up. Includes Grip Glue. , , NOTE: Only includes throttle boss for throttle side grip ,. 6212 10 on hand More Info/Options for Kuryakyn Premium ISO-Grips with Chrome Accent 6212

$68.99 ITP Hole Shot Tire 532031 $68.99 Manufacturer: ITP Dennis Kirk Part #: 65750 ITP Hole Shot Tire: Manufacturer part # 532031 - Patented split-knob design. Special rim guard protects wheel and helps prevent air loss. Extremely puncture-resistant because of heavy-duty sidewall. 4-ply rating. Tube or tubeless. 532031 More than 10 on hand More Info/Options for ITP Hole Shot Tire 532031

$68.99 DID 520 Vector Supreme Drive Chain p118182 118196 $68.99 Manufacturer: DID Dennis Kirk Part #: 118196 DID 520 Vector Supreme Drive Chain: Manufacturer part # p118182 - DennisKirk Part # 118196 - PROFESSIONAL O-RING SERIES CHAIN (V) D.I.D.s high-performance O-ring chain. Longest possible wear with solid bushings. Reinforced rollers for greatest impact resistance. Recommended for machines originally equipped with O-ring chains, , SPECS:, Max. Engine Size: 400cc, Tensile Strength: 6,830 lbs, Wear Life Index: 2,230, (Wear Life Index should be used as a comparison for probable wear life, under identical circumstances. Think of it as a percent, with standard chains being 100). , Includes a Clip Type Master Link , , Replacement connecting link:, Clip-Type: part no. 11-22, Rivet-Type: part no 11-52. p118182 2 on hand More Info/Options for DID 520 Vector Supreme Drive Chain p118182 118196

$68.99 EBC Standard CK Clutch Kit CK4413 $68.99 Manufacturer: EBC Dennis Kirk Part #: 381859 EBC Standard CK Clutch Kit: Manufacturer part # CK4413 - Cork-based clutch material impregnated with aluminum particles to increase heat resistance and wear life. Clutch drag and swell avoided through highly-compressed clutch technique. Ideal for general-purpose street/sport/touirng bikes. Kit includes complete engine set of friction plates only.. CK4413 2 on hand More Info/Options for EBC Standard CK Clutch Kit CK4413

$68.99 Arlen Ness LED Jet-Eye Turn Signal 12-270 $68.99 Manufacturer: Arlen Ness Dennis Kirk Part #: H21064 Arlen Ness LED Jet-Eye Turn Signal: Manufacturer part # 12-270 - New stretched cat eye design. Features chrome-plated die-cast housing and super-bright LED bulbs. Available as a complete kit or individual pieces: Assembly-H21059, Taillight only-H21058. Sold as Pairs.. 12-270 1 on hand More Info/Options for Arlen Ness LED Jet-Eye Turn Signal 12-270

$68.99 TekVest Deluxe Quick-Attach Shoulder Pads SPTP2305 $68.99 Manufacturer: TekVest Dennis Kirk Part #: 353282L TekVest Deluxe Quick-Attach Shoulder Pads : Manufacturer part # SPTP2305 - One-piece sectional design shoulder pads attach to vest for added protection. Closed-cell foam and UHMW plastic provide a higher level of overall protection. Fit Trail Pro, Super Sport, Sport and Freestyle vests. SPTP2305 3 on hand More Info/Options for TekVest Deluxe Quick-Attach Shoulder Pads SPTP2305

$68.99 K & N Flame Arrestor Adapter 85-9291 $68.99 Manufacturer: K & N Dennis Kirk Part #: 301160 K & N Flame Arrestor Adapter: Manufacturer part # 85-9291 - K&N has the only filter approved by the U.S. Coast Guard as a flame arrestor. Increases horsepower and is unaffected by moisture. Adapters feature a 2-piece design that assures mounting bolts wont come loose. Adapter required to mount arrestor to carburetor - sold separately and sold each.. 85-9291 2 on hand More Info/Options for K & N Flame Arrestor Adapter 85-9291

$68.99 Michelin Starcross MS3 Soft to Intermediate Tire STARCROSS $68.99 Manufacturer: Michelin Dennis Kirk Part #: 642945 Michelin Starcross MS3 Soft to Intermediate Tire: Manufacturer part # STARCROSS - Rated for speeds up to 81mph. The tires for serious racers. Reversible tread pattern features a treadwear indicator that shows you when to reverse the tire on the rim; reverse when the "M" disappears. Get equal traction in both directions on a wide range of terrain from mirror-image knobs. The StarCross MS3 tires feature an M-block knob pattern with reinforced scoop-like knobs that are widely spaced. Strong casings incorporate three cross-woven polyamide plies. For superb cornering action, staggered shoulder knobs included on all tires. Super stiff sidewalls provide high-impact shock absorption on landings, while flexible tread minimizes rebound on rough tracks and helps keep the tires in contact with the ground. Sidewall ID Information: Michelin 80/100-21 M/C 51M MS3 Starcross. , Dimensions: , Inflated Width/Measuring Rim Width: Not Available, Inflated Diameter: Not Available, Acceptable Rim Width(s): Not Available, Deepest Tread Depth: 15/32 in., Balance Dot: None, Directional Arrow: None, Speed Rating: M-Rated up to 81 MPH, , Capacities and Construction: , Bias or Radial Ply: Bias, Load Capacity/Inflation Pressure: Not Available, Load Range: B, Tread Plies/Material: Not Available, Sidewall Plies/Material: Not Available, DOT Approved for Road Use: No, Tube or Tubeless: Tube-Type. STARCROSS 4 on hand More Info/Options for Michelin Starcross MS3 Soft to Intermediate Tire STARCROSS

$68.99 Magnum Swivel-Fit Single Disc Front Brake Line p1902337 1902319 $68.99 Manufacturer: Magnum Dennis Kirk Part #: 1902319 Magnum Swivel-Fit Single Disc Front Brake Line: Manufacturer part # p1902337 - DennisKirk Part # 1902319 - Swivel-Fit design offers custom style with unmatched adaptability and fit. Sleek, factory-crimped polished chrome fittings. Swivel fitting is tucked under the lower triple-tree; corrects banjo orientation which eliminates kinking in the braided line. Constructed of Kevlar for extreme high-performance/safety ratings and dramatically reduced line expansion for improved lever feel. Covered with a crystal clear Teflon outer jacket for impressive protection against scuffing; outer jacket will never discolor. Three lower section lengths available to cover most stock fork applications. Lines use 7/16 in. banjo fittings at the master cylinder and 90 degree 3/8 in. banjo fittings at the caliper. Exceeds all DOT FMVSS-106 specifications. Made in the U.S.A., , Included Items: , (1) Brake line 56 in. with one 10mm 90-degree banjo and one 12mm 90-degree banjo fitting, (2) 10mm Crush washers, (2) 12mm Crush washers, (1) Mounting bracket, , Stock Application Chart SOFTAIL FXST 00-06 , Total Length: 46 in., Lower Section Length: 22 in., Banjo Angle: 35 degree, Polished Stainless - #1902372, Black Pearl - #1902291, FXST/C 84-99 , Total Length: 48 in., Lower Section Length: 22 in., Banjo Angle: 180 degree, Sterling Chromite II - #1902465, FXSTC 07-08 , Total Length: 50 in., Lower Section Length: 22 in., Banjo Angle: 180 degree, Polished Stainless - #1902410, Black Pearl - #1902329, Sterling Chromite II - #1902467, FXSTD 00-07 , Total Length: 46 in., Lower Section Length: 22 in., Banjo Angle: 35 degree, Polished Stainless - #1902372, Black Pearl - #1902291, Sterling Chromite II - #1902429, FLST/F/C 87-07, FLSTN 93-96 , Total Length: 45 in., Lower Section Length: 20 in.,Banjo Angle: 35 degree, Polished Stainless - #1902369, Black Pearl - #1902288, Sterling Chromite II - #1902426 DYNA FXD 00-05 , Total Length: 40 in., Lower Section Length: 20 in., Banjo Angle: 35 degree, Sterling Chromite II - #1902424, Polished Stainless - #1902367, Black Pearl - #1902286, FXDB, FXDC, FXDL 92-05 , Total Length: 40 in., Lower Section Length: 20 in., Banjo Angle: 35 degree, Sterling Chromite II - #1902424, Polished Stainless - #1902367, Black Pearl - #1902286, FXDWG 06-07 , Total Length: 50 in., Lower Section Length: 24 in., Banjo Angle: 180 degree, Sterling Chromite II - #1902468, Polished Stainless - #1902411, Black Pearl - #1902330, FXDWG 93-05 , Total Length: 48 in., Lower Section Length: 22 in., Banjo Angle: 180 degree, Sterling Chromite II - #1902465, Polished Stainless - #1902408, Black Pearl - #1902327 XL XLH 86-91, XL883 Hugger 1987 , Total Length: 42 in., Lower Section Length: 20 in., Banjo Angle: 180 degree, Sterling Chromite II - #1902465. p1902337 1 on hand More Info/Options for Magnum Swivel-Fit Single Disc Front Brake Line p1902337 1902319

$68.99 Magnum Sterling Chromite II Swivel-Fit Single Disc Front Brake Line p1902472 1902454 $68.99 Manufacturer: Magnum Dennis Kirk Part #: 1902454 Magnum Sterling Chromite II Swivel-Fit Single Disc Front Brake Line: Manufacturer part # p1902472 - DennisKirk Part # 1902454 - Swivel-Fit design offers custom style with unmatched adaptability and fit. Sleek, factory-crimped polished chrome fittings. Swivel fitting is tucked under the lower triple-tree; corrects banjo orientation which eliminates kinking in the braided line. Constructed of Kevlar for extreme high-performance/safety ratings and dramatically reduced line expansion for improved lever feel. Covered with a crystal clear Teflon outer jacket for impressive protection against scuffing; outer jacket will never discolor. Three lower section lengths available to cover most stock fork applications. Lines use 7/16 in. banjo fittings at the master cylinder and 90 degree 3/8 in. banjo fittings at the caliper. Exceeds all DOT FMVSS-106 specifications. Made in the U.S.A., , Included Items: , (1) Brake line 54 in. w/one 10mm 90-degree banjo and one 12mm 90-degree banjo fitting, (2) 10mm crush washers, (2) 12mm crush washers, (1) Mounting bracket, , Stock Application Chart SOFTAIL FXST 00-06 , Total Length: 46 in., Lower Section Length: 22 in., Banjo Angle: 35 degree, Polished Stainless - #1902372, Black Pearl - #1902291, FXST/C 84-99 , Total Length: 48 in., Lower Section Length: 22 in., Banjo Angle: 180 degree, Sterling Chromite II - #1902465, FXSTC 07-08 , Total Length: 50 in., Lower Section Length: 22 in., Banjo Angle: 180 degree, Polished Stainless - #1902410, Black Pearl - #1902329, Sterling Chromite II - #1902467, FXSTD 00-07 , Total Length: 46 in., Lower Section Length: 22 in., Banjo Angle: 35 degree, Polished Stainless - #1902372, Black Pearl - #1902291, Sterling Chromite II - #1902429, FLST/F/C 87-07, FLSTN 93-96 , Total Length: 45 in., Lower Section Length: 20 in.,Banjo Angle: 35 degree, Polished Stainless - #1902369, Black Pearl - #1902288, Sterling Chromite II - #1902426 DYNA FXD 00-05 , Total Length: 40 in., Lower Section Length: 20 in., Banjo Angle: 35 degree, Sterling Chromite II - #1902424, Polished Stainless - #1902367, Black Pearl - #1902286, FXDB, FXDC, FXDL 92-05 , Total Length: 40 in., Lower Section Length: 20 in., Banjo Angle: 35 degree, Sterling Chromite II - #1902424, Polished Stainless - #1902367, Black Pearl - #1902286, FXDWG 06-07 , Total Length: 50 in., Lower Section Length: 24 in., Banjo Angle: 180 degree, Sterling Chromite II - #1902468, Polished Stainless - #1902411, Black Pearl - #1902330, FXDWG 93-05 , Total Length: 48 in., Lower Section Length: 22 in., Banjo Angle: 180 degree, Sterling Chromite II - #1902465, Polished Stainless - #1902408, Black Pearl - #1902327 XL XLH 86-91, XL883 Hugger 1987 , Total Length: 42 in., Lower Section Length: 20 in., Banjo Angle: 180 degree, Sterling Chromite II - #1902465. p1902472 1 on hand More Info/Options for Magnum Sterling Chromite II Swivel-Fit Single Disc Front Brake Line p1902472 1902454

$68.99 Goodridge Rear Superbike Brake Line Kit p1902877 1902887 $68.99 Manufacturer: Goodridge Dennis Kirk Part #: 1902887 Goodridge Rear Superbike Brake Line Kit: Manufacturer part # p1902877 - DennisKirk Part # 1902887 - -3 race-inspired brake line kits give you the stopping power of the pros. Stainless braided hose is created from 24 separate strands of four wires making it a 96-wire hose. Plated steel fittings. Used by AMA Factory and Privateer race teams, , Included Items: , 1. (1) 25" Brake line with (2) 10mm 25° banjo fittings, 2. (4) 10mm crush washers, 3. (2) 10mm-1.25 banjo bolts.. p1902877 1 on hand More Info/Options for Goodridge Rear Superbike Brake Line Kit p1902877 1902887

$68.99 Thunder Heart Grips RSC1656C $68.99 Manufacturer: Thunder Heart Dennis Kirk Part #: H59337 Thunder Heart Grips: Manufacturer part # RSC1656C - Featuring comfortable rubber inserts that match Thunder Heart foot pegs and brake/shifter pegs. Designed to fit dual throttle assemblies 82 and up. Made in the U.S.A.. , NOTE: Will not fit models with air reservoir in handlebars. RSC1656C 2 on hand More Info/Options for Thunder Heart Grips RSC1656C

$68.99 Smith Warp Goggles WR1CFRDRP5 $68.99 Manufacturer: Smith Dennis Kirk Part #: 372606 Smith Warp Goggles: Manufacturer part # WR1CFRDRP5 - Features Articulating Outrigger Positioning System . Posi-lock strap with no-slip silicone backing. F.A.T. 2-layer face foam. Medium fit. Single lens is constructed from clear anti-fog Lexan26010306.. WR1CFRDRP5 1 on hand More Info/Options for Smith Warp Goggles WR1CFRDRP5

$68.99 Magnum Sterling Chromite II Custom Single-Disc Brake Line 36154 $68.99 Manufacturer: Magnum Dennis Kirk Part #: 1900534 Magnum Sterling Chromite II Custom Single-Disc Brake Line: Manufacturer part # 36154 - Same features as the other Chromite II brake lines. 35°, 12mm banjo fittings on the master cylinder end of the brake lines. Single-disc brake line in lengths of 36"-74". All lines have a 7/16" banjo fitting on the master cylinder end and a 90° 3/8"/10mm banjo fitting on the caliper end. 36154 1 on hand More Info/Options for Magnum Sterling Chromite II Custom Single-Disc Brake Line 36154

$68.99 Magnum Sterl