|
|
$479.95
Vance & Hines SS2-R System with Aluminum Canister 442725
Dennis Kirk Part #: 442725
Vance & Hines SS2-R System with Aluminum Canister 442725: Manufacturer part # 13534 - Designed to meet the demands of todays sportbike rider with increased performance and a responsible sound level. The ultimate in performance, finish and fit, for hassle-free installation. Three-piece design features quick-release, spring mounted canister and middle section. Large diameter, smooth-bend headpipes for maximum exhaust flow. Polished, hard nickel plating on all headers and middle pipes fights corrosion and rust. Unique high-volume oval design canisters are available in highly polished aluminum. An effective triple-chambered baffling system cancels noise waves, not the power pulses. All baffles are removable and re-packable. Billet, machined aluminum end caps. Some carburetor re-jetting may be required for optimum performance. NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product. NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 13534
1 on Hand
More Info/Options for Vance & Hines SS2-R System with Aluminum Canister 442725
|
|
|
|
CLEARANCE!
Was: $563.99
Now: $479.39
H44012 Thunderheader 2 into 1 Exhaust System
Dennis Kirk Part #: H44012
H44012 Thunderheader 2 into 1 Exhaust System: Manufacturer part # 1015 - ThunderHeader head pipes have been tuned to the proper length and diameter to produce maximum horsepower and a excellent torque curve. A patented collector is used. The collector is designed to direct spent gases through four acoustical dampening chambers. The flow director serves a multi-task function: directs outgoing flow through four acoustical dampening chambers creating a spiral motion upon exiting to atmosphere and it also forms a pyramidal shaped anti-revision trap to minimize the amount of air rushing in. In conjunction with the flow director, a diffuser shroud is attached to the reverse cone, this patented device is designed to defuse the air rushing in as the pressure inside of the system becomes equal to atmosphere. , , Included Items: , (1) Exhaust Header, (2) 5/16-24 x 3/4 Hex Bolts, (6) 5/16 Plain Washers, (1) 5/16 Lock Washer, (1) 5/16-18 Nut, (2) 5/16-24 Lock Nut, (1) Mounting Bracket, (1) 5/16-18 x 1 Hex Bolt, (1) Clamp 3/4, (1) Clamp 5/8, (1) Collector, , NOTE: This is a 2 into 1 long style (right side only). , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 1015
1 on Hand
More Info/Options for H44012 Thunderheader 2 into 1 Exhaust System
|
|
|
|
CLOSEOUT!
Was: $563.99
Now: $479.39
H44017 Thunderheader 2 into 1 Exhaust System
Dennis Kirk Part #: H44017
H44017 Thunderheader 2 into 1 Exhaust System: Manufacturer part # 1020 - ThunderHeader head pipes have been tuned to the proper length and diameter to produce maximum horsepower and a excellent torque curve. A patented collector is used. The collector is designed to direct spent gases through four acoustical dampening chambers. The flow director serves a multi-task function: directs outgoing flow through four acoustical dampening chambers creating a spiral motion upon exiting to atmosphere and it also forms a pyramidal shaped anti-revision trap to minimize the amount of air rushing in. In conjunction with the flow director, a diffuser shroud is attached to the reverse cone, this patented device is designed to defuse the air rushing in as the pressure inside of the system becomes equal to atmosphere. , , Included Items: , (1) Exhaust Header, (2) 5/16-24 x 3/4 Hex Bolts, (6) 5/16 Plain Washers, (1) 5/16 Lock Washer, (1) 5/16-18 Nut, (2) 5/16-24 Lock Nut, (1) Mounting Bracket, (1) 5/16-18 x 1 Hex Bolt, (1) Clamp 3/4, (1) Clamp 5/8, (1) Collector, , NOTE: This is a 2 into 1 long style (right side only). , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 1020
2 on Hand
More Info/Options for H44017 Thunderheader 2 into 1 Exhaust System
|
|
|
|
$479.00
Cobra Slash-Down Hot Rod Speedster Exhaust 449836
Dennis Kirk Part #: 449836
Cobra Slash-Down Hot Rod Speedster Exhaust 449836: Manufacturer part # 1829 - Addition of PowerPort headpipe increases overall performance. Two-inch chrome plated steel, full-length heat shields fit tip-to-tip. Beautiful machined billet end caps produces a great look for your bike. Best fit and finish exhaust on the market. Baffles are removable. INCLUDED ITEMS: , Two exhaust with heatshields. One muffler assembly. One exhaust bracket. Two exhaust flanges. Seven hose clamps. Two clamps. Two 5/16 in.-18 x 5/8 in. hex bolts. Two 1/4 in.-20 x 5/8 in. button screws. Two billet muffler tips. One instruction sheet. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture. Please consult the exhaust manufacturer directly with questions regarding any modifications that may be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore is not covered ny any warranty. See Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1829
1 on Hand
More Info/Options for Cobra Slash-Down Hot Rod Speedster Exhaust 449836
|
|
|
|
$479.00
Cobra Slash-Down Hot Rod Speedster Exhaust 449837
Dennis Kirk Part #: 449837
Cobra Slash-Down Hot Rod Speedster Exhaust 449837: Manufacturer part # 1830 - Addition of PowerPort headpipe increases overall performance. Two-inch chrome plated steel, full-length heat shields fit tip-to-tip. Beautiful machined billet end caps produces a great look for your bike. Best fit and finish exhaust on the market. Baffles are removable. INCLUDED ITEMS: , Two exhaust with heatshields. One muffler assembly. One exhaust bracket. Two exhaust flanges. Seven hose clamps. Two clamps. Two 5/16 in.-18 x 5/8 in. hex bolts. Two 1/4 in.-20 x 5/8 in. button screws. Two billet muffler tips. One instruction sheet. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture. Please consult the exhaust manufacturer directly with questions regarding any modifications that may be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore is not covered ny any warranty. See Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1830
1 on Hand
More Info/Options for Cobra Slash-Down Hot Rod Speedster Exhaust 449837
|
|
|
|
$478.99
H25006 Vance & Hines Big Shots Staggered Exhaust System
Dennis Kirk Part #: H25006
H25006 Vance & Hines Big Shots Staggered Exhaust System: Manufacturer part # 17907 - Feature the Power Chamber design, a revolutionary crossover system that beefs up the horsepower. 2 1/2 in. heat shields are blue-proof for long-lasting style. Perfect fit and unrivalled finish. At the business end of the Big Shots Long System are meticulously finished billet slash cut end caps. Instructions, all mounting hardware and removable baffles are included. Include mounts for factory O2 sensors Made in the U.S.A.. For replacement Slash Billet End Caps order DK part no. H43199; for optional Quiet Baffle order DK Part no. 431326, for straight billet end caps order H43-037. , , For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 NOTE: Will not fit models with kick start . , , NOTE: There is no warranty on exhaust pipes and mufflers with any regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See our Chems/Lubes section to help prevent or remove blueing. INCLUDED ITEMS: #28 Three hose clamps. #20 Five hose clamps. Two nut plates. One 6mm nylon lock. Two 10mm lock nuts. Two 1/2" washers. Two 10 x 30mm allen bolts. Four 5/16" x 5/8" flange head bolts. One 6 x 16mm flange bolt. Two 10 x 25mm button head allen bolt.. 17907
1 on Hand
More Info/Options for H25006 Vance & Hines Big Shots Staggered Exhaust System
|
|
|
|
$478.99
Yoshimura RS-3 Oval Race High Exit Slip-On Muffler with Glossy Carbon Fiber Sleeve 446760
Dennis Kirk Part #: 446760
Yoshimura RS-3 Oval Race High Exit Slip-On Muffler with Glossy Carbon Fiber Sleeve 446760: Manufacturer part # 1115253 - A convenient slip-on design featuring Yoshimura's racing technology. Tailpipe is 20-gauge stainless steel to reduce weight and boost power. Baffles are stainless steel 2 in. or 2.25 in. diameter race style. Glossy carbon fiber quick-release exhaust canisters. High exit muffler. NOTE:. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1115253
1 on Hand
More Info/Options for Yoshimura RS-3 Oval Race High Exit Slip-On Muffler with Glossy Carbon Fiber Sleeve 446760
|
|
|
|
|
|
$477.99
V-Factor Stretched Chopper Gas Tank for Custom Frames 182816
Dennis Kirk Part #: 182816
V-Factor Stretched Chopper Gas Tank for Custom Frames 182816: Manufacturer part # 81080 - Designed for custom frames with stretched backbones that will accept the 25" tunnel length (tunnel measures 2 1/2" wide. "Weld to frame" brackets recess in the bottom of the tank for a hidden look. Rubber isolated mounting brackets to prevent vibration cracks. Includes chrome plated pop-up gas cap (replacement gas cap Part No. 18-2813). Tapped 1/8-27 NPT at rear of tank for gas crossover line (not included). Use with 13/16" (22mm) fuel valve. Holds 5.3 gallons, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 81080
1 on Hand
More Info/Options for V-Factor Stretched Chopper Gas Tank for Custom Frames 182816
|
|
|
|
$477.99
Jardine RT-One Oval Muffler with Carbon Fiber Muffler Sleeve 4400141
Dennis Kirk Part #: 4400141
Jardine RT-One Oval Muffler with Carbon Fiber Muffler Sleeve 4400141: Manufacturer part # 18-4113-342-02 - RT-One are the pinnacle of Jardines exhaust lineup. Engineered to improve sound, looks and performance. Dyno-tested to ensure maximum power with smooth delivery. Designed with experience gained as exhaust supplier to American Honda's road race team. Come complete with CNC-machined billet clamp and stainless steel collector pipe (if required). Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 18-4113-342-02
1 on Hand
More Info/Options for Jardine RT-One Oval Muffler with Carbon Fiber Muffler Sleeve 4400141
|
|
|
|
$477.99
Jardine RT-One Oval Muffler with Carbon Fiber Muffler Sleeve 4400138
Dennis Kirk Part #: 4400138
Jardine RT-One Oval Muffler with Carbon Fiber Muffler Sleeve 4400138: Manufacturer part # 18-3111-342-02 - RT-One are the pinnacle of Jardines exhaust lineup. Engineered to improve sound, looks and performance. Dyno-tested to ensure maximum power with smooth delivery. Designed with experience gained as exhaust supplier to American Honda's road race team. Come complete with CNC-machined billet clamp and stainless steel collector pipe (if required). Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 18-3111-342-02
1 on Hand
More Info/Options for Jardine RT-One Oval Muffler with Carbon Fiber Muffler Sleeve 4400138
|
|
|
|
$477.99
Edelbrock Qwiksilver Twist Throttle Carb Kit 16470
Dennis Kirk Part #: 16470
Edelbrock Qwiksilver Twist Throttle Carb Kit 16470: Manufacturer part # 3158 - Pumper-style carburetor designed exclusively for ATVs; more horsepower and more reliability. Flat slide with single fuel circuit for easy external adjustment; no jets to replace. Features internal fuel cell and anti-slosh plate in fuel bowl for steady fuel delivery. Mounts directly and easily to stock manifold. For twist throttle only; twist throttle and cable included. For replacement cable order 19-5799. 3158
1 on Hand
More Info/Options for Edelbrock Qwiksilver Twist Throttle Carb Kit 16470
|
|
|
|
$477.99
Jardine RT-One Oval Muffler with Carbon Fiber Muffler Sleeve 4400294
Dennis Kirk Part #: 4400294
Jardine RT-One Oval Muffler with Carbon Fiber Muffler Sleeve 4400294: Manufacturer part # 18-1020-322-02 - RT-One are the pinnacle of Jardines exhaust lineup. Engineered to improve sound, looks and performance. Dyno-tested to ensure maximum power with smooth delivery. Designed with experience gained as exhaust supplier to American Honda's road race team. Come complete with CNC-machined billet clamp and stainless steel collector pipe (if required). Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 18-1020-322-02
1 on Hand
More Info/Options for Jardine RT-One Oval Muffler with Carbon Fiber Muffler Sleeve 4400294
|
|
|
|
$477.99
Leo Vince SBK Oval Evo II Slip On Stainless High Mount Short Muffler With Titanium Canister 4400862
Dennis Kirk Part #: 4400862
Leo Vince SBK Oval Evo II Slip On Stainless High Mount Short Muffler With Titanium Canister 4400862: Manufacturer part # 7097 - Low-decibel exhaust note -- without sacrificing performance. Slip-on mufflers feature stainless steel mid-pipe. TIG-welded stainless steel AISI 304 muffler body and fittings. Satin-finish titanium muffler body. Aluminum alloy mounting strap and frame attachment brackets. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 7097
1 on Hand
More Info/Options for Leo Vince SBK Oval Evo II Slip On Stainless High Mount Short Muffler With Titanium Canister 4400862
|
|
|
|
$477.99
V-Factor Stretched Chopper Gas Tank for Custom Frame 182814
Dennis Kirk Part #: 182814
V-Factor Stretched Chopper Gas Tank for Custom Frame 182814: Manufacturer part # 81077 - Flush mounted pop-up style gas cap. Designed for custom frames with stretched backbones that will accept the 24" tunnel length (tunnel measures 2 1/2" wide). "Weld to frame" brackets recess in the bottom of the tank for a hidden look. Rubber isolated mounting brackets to prevent vibration cracks. Includes chrome plated pop-up gas cap (replacement cap Part No. 18-2813). Tapped 1/8 27 NPT at rear of thank for gas crossover line (not included). Use with 13/16" (22mm) fuel valve, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 81077
1 on Hand
More Info/Options for V-Factor Stretched Chopper Gas Tank for Custom Frame 182814
|
|
|
|
$477.99
Leo Vince SBK Oval Evo II Slip On Stainless Muffler With Carbon Fiber Canister 4400861
Dennis Kirk Part #: 4400861
Leo Vince SBK Oval Evo II Slip On Stainless Muffler With Carbon Fiber Canister 4400861: Manufacturer part # 7096 - Low-decibel exhaust note -- without sacrificing performance. Slip-on mufflers feature stainless steel mid-pipe. TIG-welded stainless steel AISI 304 muffler body and fittings. Glossy carbon fiber muffler body. Aluminum alloy mounting strap and frame attachment brackets. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 7096
1 on Hand
More Info/Options for Leo Vince SBK Oval Evo II Slip On Stainless Muffler With Carbon Fiber Canister 4400861
|
|
|
|
|
|
CLEARANCE!
Was: $635.99
Now: $476.99
Hard Krome 3 in. Equalizer Staggered Straights with Hard-Tips Exhaust System 448416
Dennis Kirk Part #: 448416
Hard Krome 3 in. Equalizer Staggered Straights with Hard-Tips Exhaust System 448416: Manufacturer part # 46-4840B - 40 in. overall length make these the worlds biggest equal-length staggered straights. Outer pipe measures 3 in. in diameter; 1 3/4 in. inner pipe. CNC-machined Straight-Cut Hard-Tip end caps included. Customize with optional end caps:, Slash-Cut - 44-8253, Taper Style - 44-8256. Optional Straight-thru baffles - 44-8259. Replacement Spiral Type Baffles - 44-8269. Polished chrome finish. NOTE: Installation of these pipes on California and European models requires one of our part number 447234, Oxygen sensor Eliminator Kit , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture. Please consult the exhaust manufacturer directly with questions regarding any modifications that may be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore is not covered ny any warranty. See Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 46-4840B
1 on Hand
More Info/Options for Hard Krome 3 in. Equalizer Staggered Straights with Hard-Tips Exhaust System 448416
|
|
|
|
$476.99
Excel Pro Series Rear Wheel Assembly 55905
Dennis Kirk Part #: 55905
Excel Pro Series Rear Wheel Assembly 55905: Manufacturer part # UR4GK412 - Modular wheel assemblies feature Excel?s patent pending Pro Series hubs, Colorworks MX rims and 302X stainless steel 8-gauge spokes. Universal application billet aluminum hubs with changeable drive and brake carrier ring adapters. Comes precision assembled using Spline Drive® aluminum nipples. Wheels come with bearings, bushings and seals and carrier pins installed. Order carrier ring sets and rotor attachment kits separately. Free spoke nipple tool included.. UR4GK412
1 on Hand
More Info/Options for Excel Pro Series Rear Wheel Assembly 55905
|
|
|
|
$476.99
Arlen Ness Evil 7 Ness-Tech Billet Pulley 804980
Dennis Kirk Part #: 804980
Arlen Ness Evil 7 Ness-Tech Billet Pulley 804980: Manufacturer part # 16-918 - Precision-machined from a single piece of 6061 T-6 aluminum and then polished and chrome plated. Features machined design on both sides of the pulley. Includes an adapter ring to allow mounting on most 86-06 style wheels. Matches the Ness-Tech® billet wheels and rotors. Forged and machined in the U.S.A.. NOTE: This item ships in 3-4 days after the order is placed.. 16-918
1 on Hand
| |
