|
|
|
|
|
|
|
|
$56.99
Orange Cycra DX Handguards
Dennis Kirk Part #: 617771
Orange Cycra DX Handguards: Manufacturer part # 45 - Protects hands from snow roost and more. Flexible rubber edge. Fits most snowmobiles with plenty of room for levers/controls. 7/8 inch handlebar L bracket included. Replacement bracket set use part number 618119. 45
4 on Hand
More Info/Options for Orange Cycra DX Handguards
|
|
|
|
$56.99
Gunnar Red Tether Kill Switch, Normally Closed 211098
Dennis Kirk Part #: 211098
Gunnar Red Tether Kill Switch, Normally Closed 211098: Manufacturer part # GK1011NC - Tether kill switch is easy to install - plugs into most ATVs. Narrow design, installs on slightly curved portion of the bars. Housing O-ring weatherproofed. Matching lanyard included. Replacement lanyard available separately. This tether is normally closed. To see if this is correct for your machine you must perform the following test. 1. Locate the two wires going to your machine's kill switch. 2. With the kill switch in the run position, test for continuity between the two wires. 3. If you DO have continuity, this tether switch WILL work for your machine. 4. If you DO NOT have continuity, this tether WILL NOT work for your machine, , NOTE: When selecting a kill switch be sure to check and see if you need a Normally Open or a Normally Closed switch. If you are not sure, check the wiring schematic for your machine. GK1011NC
1 on Hand
More Info/Options for Gunnar Red Tether Kill Switch, Normally Closed 211098
|
|
|
|
|
|
$56.99
6 in. Sno-Stuff Carbide Wear Rods for TCS Skis
Dennis Kirk Part #: 031707
6 in. Sno-Stuff Carbide Wear Rods for TCS Skis: Manufacturer part # 570-025 - Features 4" of center control carbide and four 1" wear pads (two on front and rear) for better control on ice and hardpack. Includes eight 3/8" flanged hex nuts. Sold in pair. , , Fits TCS skis only. Will NOT fit X-Calibar skis , , Wear rods for X-Calibar skis use part numbers:, 03-2038 for 4" carbide. 03-2039 for 6" carbide. 03-2040 for 8" carbide. , , Two wear rods are required for each ski, order 2 sets to replace wear rods on both skis. 570-025
4 on Hand
More Info/Options for 6 in. Sno-Stuff Carbide Wear Rods for TCS Skis
|
|
|
|
$56.99
Woodys Dooly 6 in. Carbide Wear Rod 031697
Dennis Kirk Part #: 031697
Woodys Dooly 6 in. Carbide Wear Rod 031697: Manufacturer part # DA6-9750 - This revolutionary new product from the industry leader gives you four traction lines on your turning surface for enhanced handling. Dramatically decreases darting. 4 in. carbide is 90º, 6 in. and 8 in. carbide is 60º. Durable 3/8 in.-16 mounting studs ensure secure fit. , NOTE:, These carbides are sold individually-order 2 per snowmobile, , NOTE: , Fits Bearcat, EXT Touring, Pantera, Powder Extreme, Thundercat/MC, Z, XL and ZRT models with Composite Ski.. DA6-9750
1 on Hand
More Info/Options for Woodys Dooly 6 in. Carbide Wear Rod 031697
|
|
|
|
|
|
|
|
|
|
$56.99
Sno-Stuff Ski Skins 5 1/2 in. Width 10388
Dennis Kirk Part #: 10388
Sno-Stuff Ski Skins 5 1/2 in. Width 10388: Manufacturer part # 501-201-86 - Made from 3/16 in. thick, high-impact polyethylene in black, neon green and several other bright colors to match most popular sleds. New 1/8 in. thick wrap-around design for a cleaner look and more secure attachment. Prevents ice and snow from sticking to skis. Improves performance. Drilled for stock wear bar use for easy installation.. 501-201-86
10+ on hand
More Info/Options for Sno-Stuff Ski Skins 5 1/2 in. Width 10388
|
|
|
|
$56.99
Pro Tek Pro-Lite Passenger Footpegs 499094
Dennis Kirk Part #: 499094
Pro Tek Pro-Lite Passenger Footpegs 499094: Manufacturer part # PG135 - Constructed of CNC-machined, aerospace heat-treated billet aluminum. Slash cut and machined for greater weight savings and better ground clearance. Fully milled (not knurled) for better grip and longer color life. Fits most stock applications. Sold in pairs. Yamaha front pegs come with pin and circlip. ,. PG135
1 on Hand
More Info/Options for Pro Tek Pro-Lite Passenger Footpegs 499094
|
|
|
|
|
|
|
|
|
|
$56.99
Goodridge Sportbike/Cruiser Rear Brake Hose Kit 196548
Dennis Kirk Part #: 196548
Goodridge Sportbike/Cruiser Rear Brake Hose Kit 196548: Manufacturer part # HN28671RP - Stainless-steel #3 brake hose kits vastly improve performance including better brake lever sensitivity and dramatically reduced stopping distances. Manufactured from the finest Goodridge materials. Dual-line front kits eliminate the tee under the triple clamp for reduced weight and better feel. Hose is wrapped tighter and has a higher wire count than competing brands. Clear vinyl cover protects bike from abrasion. PTFE liner is compatible with all brake and clutch fluids.. HN28671RP
1 on Hand
More Info/Options for Goodridge Sportbike/Cruiser Rear Brake Hose Kit 196548
|
|
|
|
$56.99
Goodridge Sportbike/Cruiser Rear Brake Hose Kit 196402
Dennis Kirk Part #: 196402
Goodridge Sportbike/Cruiser Rear Brake Hose Kit 196402: Manufacturer part # HN28761RP - Stainless-steel #3 brake hose kits vastly improve performance including better brake lever sensitivity and dramatically reduced stopping distances. Manufactured from the finest Goodridge materials. Dual-line front kits eliminate the tee under the triple clamp for reduced weight and better feel. Hose is wrapped tighter and has a higher wire count than competing brands. Clear vinyl cover protects bike from abrasion. PTFE liner is compatible with all brake and clutch fluids.. HN28761RP
1 on Hand
More Info/Options for Goodridge Sportbike/Cruiser Rear Brake Hose Kit 196402
|
|
|
|
$56.99
Factory Effex All Gripper Seat Cover 452528
Dennis Kirk Part #: 452528
Factory Effex All Gripper Seat Cover 452528: Manufacturer part # 07-24350 - Rubberized gripper material covers the entire seat for superior handling and control. Advanced material is rugged enough to take all you can throw at it, plus it's triple-stitched for extra long life. Specially designed locator pockets on nose and rear make installation a snap. Smooth clean line means it looks good on your bike, too!.. 07-24350
4 on Hand
More Info/Options for Factory Effex All Gripper Seat Cover 452528
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$56.99
FMF Power Up Jet Kit 172421
Dennis Kirk Part #: 172421
FMF Power Up Jet Kit 172421: Manufacturer part # 011745 - Kits allow you to extract maximum horsepower and torque from your bike or quad in a variety of conditions. Include jets, needles and all required parts to make your carburetor perform at its best. Make your vehicle fast and competitive.. 011745
| |
