|
|
|
|
$59.95
Moose Stage 1 & 2 Jet Kit 172443
Dennis Kirk Part #: 172443
Moose Stage 1 & 2 Jet Kit 172443: Manufacturer part # 1007-0043 - Dynojet offers a wide range of kits to fit most applications. Each kit is precisely engineered to provide a simple and cost-effective solution for your carburetion problems. Several stages of kits available for off-road dirt bikes; one kit specifically designed for ATV applications available. , STAGE 1 KITS Better throttle response and driveability; power increases up to 5 percent. For dirt bikes with stock engines using the stock airbox, air filter and stock or aftermarket exhaust. Adjust to enable use of aftermarket exhausts and stock replacement air filters. , STAGE 2 KITS Increase power by up to 8 percent. For dirt bikes with stock or mildly modified engines using stock or aftermarket exhausts with a modified airbox and a stock or replacement air filter. To be used with applications where individual air filters cannot be installed and where airbox modifications improve overall engine performance.. 1007-0043
Expected Soon
More Info/Options for Moose Stage 1 & 2 Jet Kit 172443
|
|
|
|
$59.95
Gray/Smoke Thor Youth Quadrant S7 RoostGuard
Dennis Kirk Part #: 3408884
Gray/Smoke Thor Youth Quadrant S7 RoostGuard: Manufacturer part # 27010251 - Provides maximum coverage with minimal restriction. Improved chest and back panels contour the body in the riding position. Boxed rib construction provides rigidity and natural air channels. Features energy-absorbing, high-density foam padding. Adjustable side buckle closure system. Free-floating shoulder system with removable arm guards. Fully padded neck roll for comfort. Youth fits most riders weighing 60-100 lb... 27010251
3 on Hand
More Info/Options for Gray/Smoke Thor Youth Quadrant S7 RoostGuard
|
|
|
|
$59.95
Moose Stage 2 Jet Kit 172451
Dennis Kirk Part #: 172451
Moose Stage 2 Jet Kit 172451: Manufacturer part # 1007-0051 - Dynojet offers a wide range of kits to fit most applications. Each kit is precisely engineered to provide a simple and cost-effective solution for your carburetion problems. Several stages of kits available for off-road dirt bikes; one kit specifically designed for ATV applications available. , Stage 2 Kits Increase power by up to 8 percent. For dirt bikes with stock or mildly modified engines using stock or aftermarket exhausts with a modified airbox and a stock or replacement air filter. To be used with applications where individual air filters cannot be installed and where airbox modifications improve overall engine performance.. 1007-0051
3 on Hand
More Info/Options for Moose Stage 2 Jet Kit 172451
|
|
|
|
$59.95
Medium Moose M1 Competition Vests
Dennis Kirk Part #: 3409486M
Medium Moose M1 Competition Vests: Manufacturer part # 29300021 - Main materials: nylon/polyester. Technical fleece-lined vest has coated nylon front to shed water and block cold wind. 200-gram anti-pulling fleece back panel allows unwanted heat to be expelled easily. High collar with fleece lining. Handwarmer pockets with zipper closure. High-quality embroidered graphics. All metal zippers.. 29300021
2 on Hand
More Info/Options for Medium Moose M1 Competition Vests
|
|
|
|
|
|
|
|
$59.95
38 in. Shift Assault Pants
Dennis Kirk Part #: 356798438
38 in. Shift Assault Pants: Manufacturer part # 04044 - X-Stretch 4-way stretch panel in the crotch for unrestricted mobility. Heavy-duty 600D polyester construction for increased durability. Ballistic inner knee panels for heat and abrasion resistance.. 04044
2 on Hand
More Info/Options for 38 in. Shift Assault Pants
|
|
|
|
$59.95
34 in. Shift Assault Pants
Dennis Kirk Part #: 356798434
34 in. Shift Assault Pants: Manufacturer part # 04044 - X-Stretch 4-way stretch panel in the crotch for unrestricted mobility. Heavy-duty 600D polyester construction for increased durability. Ballistic inner knee panels for heat and abrasion resistance.. 04044
4 on Hand
More Info/Options for 34 in. Shift Assault Pants
|
|
|
|
|
|
$59.95
Moose Stage 1 Jet Kit 172938
Dennis Kirk Part #: 172938
Moose Stage 1 Jet Kit 172938: Manufacturer part # 1007-0203 - Moose Dynojet jet kits provide a simple and affordable solution to carburetor tuning problems. Kits increase power and smoothness throughout the rev range while maintaining optimum fuel economy. Designed for machines with stock engines using the stock airbox, air filter and stock or aftermarket exhaust. Fully adjustable to allow for the use of well-designed aftermarket exhausts and stock replacement air filters. Improve throttle response and drivability. Power increases of approximately 5 percent throughout the entire power range. INCLUDED ITEMS: Nine main jets. One fuel needle. One pilot jet. One adjusting washer. One e-clip. One main jet adapter. One instruction sheet.. 1007-0203
1 on Hand
More Info/Options for Moose Stage 1 Jet Kit 172938
|
|
|
|
$59.95
Moose Extended Lift Bottom Mount 514363
Dennis Kirk Part #: 514363
Moose Extended Lift Bottom Mount 514363: Quick-connect mounting hardware allows easy hook-up and fast removal. Universal, heavy-duty push tube withstands the roughest use. Blade swivel constructed of 3/8 in. steel with 20 in. blade attaching points for greater blade support and strength. Open swivel eliminates dirt and snow build-up in the pivot point. Five blade swivel positions and four-way blade pitch adjustment. ATV plow bottom-mount kits include all necessary hardware to attach universal push tube and plow to your ATV. Winch mounts sold separately so customers can get exactly what they want. Hand lift kit sold separately -- customers don't pay for equipment they won't use with an electric lift. Winch mount kits accept Warn, Ramsey and Superwinch winches; come complete with roller fairlead. WHAT TO ORDER: Plow Blade: Choose one of any size Standard Blade or Country Blade. Universal Extended Lift Push Tube: Part No. 51-4355. Blade Lift System: Choose ONE of the following: **Universal Manual Hand Lift Part No. 51-4356 **E-Z Lift Part No. 51-2811 **Electric Lift Part No. 51-5893 INCLUDED ITEMS:. (3) 3/8 in. Nylock nuts (1) 1/2 in. x 3/4 in. Shoulder bolt (1) 1/2 in. Flat washer (2) Blade hinge adjusting stops (2) 3/8 in. x 1 in. Hex Head bolts (1) Bottom mount (2) 3/8 in. x 1-3/4 in. Wire loop pins (2) 3/4 in. x 2 in. Bolt retainers (2) 5/16 in. x 1 in. Carriage bolts (6) 5/16 in. Nylock nuts (2) 5/16 in. x 1-1/4 in. x 2 in. U-bolts (6) 5/16 in. Flat washers (1) Instruction sheet.
1 on Hand
More Info/Options for Moose Extended Lift Bottom Mount 514363
|
|
|
|
$59.95
Moose Extended Lift Bottom Mount 514357
Dennis Kirk Part #: 514357
Moose Extended Lift Bottom Mount 514357: Quick-connect mounting hardware allows easy hook-up and fast removal. Universal, heavy-duty push tube withstands the roughest use. Blade swivel constructed of 3/8 in. steel with 20 in. blade attaching points for greater blade support and strength. Open swivel eliminates dirt and snow build-up in the pivot point. Five blade swivel positions and four-way blade pitch adjustment. ATV plow bottom-mount kits include all necessary hardware to attach universal push tube and plow to your ATV. Winch mounts sold separately so customers can get exactly what they want. Hand lift kit sold separately -- customers don't pay for equipment they won't use with an electric lift. Winch mount kits accept Warn, Ramsey and Superwinch winches; come complete with roller fairlead. WHAT TO ORDER: Plow Blade: Choose one of any size Standard Blade or Country Blade. Universal Extended Lift Push Tube: Part No. 51-4355. Moose Blade Lift System: Choose ONE of the following: **Universal Manual Hand Lift Part No. 51-4356 **E-Z Lift Part No. 51-5593 **Winch Mount To be searched by make, model, and year **Electric Lift Part No. 51-2810 , , INCLUDED ITEMS:. , (3) 3/8 in. nylock nuts, (1) 1/2 in. x 3/4 in. shoulder bolt, (1) 1/2 in. flat washer, (2) Blade hinge adjusting stops, (2) 3/8 in. x 1 in. hex head bolts, (1) Bottom mount, (2) 3/8 in. x 1 3/4 in. wire loop pins, (4) 5/16 in. x 1 1/8 in. x 2 1/4 in. U-bolts, (8) 5/16 in. flat washers, (8) 5/16 in. nylock nuts, (1) Instruction sheet.
4 on Hand
More Info/Options for Moose Extended Lift Bottom Mount 514357
|
|
|
|
$59.95
Small Fox Racing R3 Roost Deflector
Dennis Kirk Part #: 3567856S
Small Fox Racing R3 Roost Deflector: Manufacturer part # 06051 - Polycarbonate Chest, back and shoulder construction. Lycra lined Biofoam comfort padding. Low profile chrome shoulder cups. Fully adjustable and removable padded arm guards. Full size arm guards. Secure side release buckles. Adjustable shoulder connections for custom fit.. 06051
8 on Hand
More Info/Options for Small Fox Racing R3 Roost Deflector
|
|
|
|
|
|
$59.95
54 in. Moose Qualifier Pants
Dennis Kirk Part #: 341092854
54 in. Moose Qualifier Pants: Simplicity at its finest. The Qualifier line represents attention to the basics. Qualifier features the optmum cut, cloth and cost. No frills and thrills just form and function. Not only is Qualifier one of the most affordable line in gear available, but it also offers a generous size range you don't find from a lot of other brands. Main materials: Nylon/Polyester with double stitched seams. Utilizes some of the same durable fabric as our M1 pants. Pre-bent pant leg design. Stretch panels above knees and seat for increased flexibility and comfort. Clean, simple lines with excellent fit and rugged durability. Removable foam hip pads..
1 on Hand
More Info/Options for 54 in. Moose Qualifier Pants
|
|
|
|
$59.95
OEM Alpha Graphics 527504
Dennis Kirk Part #: 527504
OEM Alpha Graphics 527504: Manufacturer part # GR-KT126 - All One Industries graphics kits include radiator shrouds, tank decals (if applicable), swingarm and One Industries logo front fender decals. Made of 15-mil vinyl with 3M adhesive backing.. GR-KT126
1 on Hand
More Info/Options for OEM Alpha Graphics 527504
|
|
|
|
$59.95
Moose Extended Lift Bottom Mount 516007
Dennis Kirk Part #: 516007
Moose Extended Lift Bottom Mount 516007: Quick-connect mounting hardware allows easy hook-up and fast removal. Universal, heavy-duty push tube withstands the roughest use. Blade swivel constructed of 3/8 in. steel with 20 in. blade attaching points for greater blade support and strength. Open swivel eliminates dirt and snow build-up in the pivot point. Five blade swivel positions and four-way blade pitch adjustment. ATV plow bottom-mount kits include all necessary hardware to attach universal push tube and plow to your ATV. Winch mounts sold separately so customers can get exactly what they want. Hand lift kit sold separately -- customers don't pay for equipment they won't use with an electric lift. Winch mount kits accept Warn, Ramsey and Superwinch winches; come complete with roller fairlead. WHAT TO ORDER: Plow Blade: Choose one of any size Standard Blade or Country Blade. Universal Extended Lift Push Tube: Part No. 51-4355. Moose Blade Lift System: Choose ONE of the following: **Universal Manual Hand Lift Part No. 51-4356 **E-Z Lift to be searched by make, model, and year **Winch Mount to be searched by make, model, and year **Electric Lift Part No. 51-5893 INCLUDED ITEMS:. (5) 3/8 in. Nylock nuts (1) 1/2 in. x 3/4 in. Shoulder bolt (2) 1/2 in. Flat washers (2) Blade hinge adjusting stops (2) 3/8 in. x 1 in. Hex Head bolts (1) Bottom mount (2) 3/8 in. x 1-3/4 in. Wire loop pins (4) 5/16 in. x 1-3/8 in. x 2-3/16 in. U-bolts (8) 5/16 in. Flat washers (8) 5/16 in. Nylock nuts (1) Instruction sheet.
1 on Hand
More Info/Options for Moose Extended Lift Bottom Mount 516007
|
|
|
|
$59.95
Parts Unlimited OEM-Type Piston 1311662
Dennis Kirk Part #: 1311662
Parts Unlimited OEM-Type Piston 1311662: Manufacturer part # 09-784-02 - Dennis Kirk has high-quality, OEM-type piston assemblies to fit most popular snowmobiles. These pistons more closely match the original equipment in ring design, construction and weight than our other aftermarket pistons. It's not necessary to replace both pistons in a twin-cylinder engine if you need only one. NOTE: Standard-size cylinders with chrome or Nikasil plating require sleeving to fit oversize pistons. See Index for cast-iron cylinder sleeves. NOTE: Dennis Kirk recommends the following preliminary work to be performed by a qualified mechanic prior to installing new pistons. If the old piston has failed, determine the cause and remedy the problem before replacing. Air leaks and/or a lean fuel mixture are the two biggest causes of burned pistons. In cases where any part of the old piston is broken or burned through, the crankcase should be disassembled and thoroughly flushed of any debris.. 09-784-02
1 on Hand
More Info/Options for Parts Unlimited OEM-Type Piston 1311662
|
|
|
|
|
|
$59.95
Moose Extended Lift Bottom Mount 515039
Dennis Kirk Part #: 515039
Moose Extended Lift Bottom Mount 515039: Quick-connect mounting hardware allows easy hook-up and fast removal. Universal, heavy-duty push tube withstands the roughest use. Blade swivel constructed of 3/8 in. steel with 20 in. blade attaching points for greater blade support and strength. Open swivel eliminates dirt and snow build-up in the pivot point. Five blade swivel positions and four-way blade pitch adjustment. ATV plow bottom-mount kits include all necessary hardware to attach universal push tube and plow to your ATV. Winch mounts sold separately so customers can get exactly what they want. Hand lift kit sold separately -- customers don't pay for equipment they won't use with an electric lift. Winch mount kits accept Warn, Ramsey and Superwinch winches; come complete with roller fairlead. WHAT TO ORDER: Plow Blade: Choose one of any size Standard Blade or Country Blade. Universal Extended Lift Push Tube: Part No. 51-4355. Blade Lift System: Choose ONE of the following: **Universal Manual Hand Lift Part No. 51-4356 **E-Z Lift Part No. 51-2810 **Winch Mount To be searched by make, model, and year **Electric Lift Part No. 51-5893.
1 on Hand
More Info/Options for Moose Extended Lift Bottom Mount 515039
|
|
|
|
|
|
|
|
