Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

Hawg Halters Inc, 4-Piston Rear Caliper RKHTCC500

$507.99 Spyke Inc. Stealth Starter w/K-9 Drive 21100124 $507.99 Manufacturer: Spyke Inc. Dennis Kirk Part #: 201865 Spyke Inc. Stealth Starter w/K-9 Drive: Manufacturer part # 21100124 - The sleekest starter ever with concealed bolts and minimal lines for a smooth design. Feature dependable gears and cutting-edge components. Chrome and polished starters have engraved end caps; black starters have smooth end caps. For superior high-torque starting, Stealth starters are available with the optional Krypto-9 starter drive pre-installed (1.4 KW).. 21100124 1 on hand More Info/Options for Spyke Inc. Stealth Starter w/K-9 Drive 21100124

$507.99 Spyke Inc. Stealth Starter w/K-9 Drive 21100126 $507.99 Manufacturer: Spyke Inc. Dennis Kirk Part #: 201867 Spyke Inc. Stealth Starter w/K-9 Drive: Manufacturer part # 21100126 - The sleekest starter ever with concealed bolts and minimal lines for a smooth design. Feature dependable gears and cutting-edge components. Chrome and polished starters have engraved end caps; black starters have smooth end caps. For superior high-torque starting, Stealth starters are available with the optional Krypto-9 starter drive pre-installed (1.4 KW).. 21100126 1 on hand More Info/Options for Spyke Inc. Stealth Starter w/K-9 Drive 21100126

$507.99 Diamond Engineering The Groove Stainless Engine/Drivetrain Kits p272145 272141 $507.99 Manufacturer: Diamond Engineering Dennis Kirk Part #: 272141 Diamond Engineering The Groove Stainless Engine/Drivetrain Kits: Manufacturer part # p272145 - DennisKirk Part # 272141 - Provide all the fasteners you'll need to assemble and install an entire engine and transmission. Include: case bolts and fasteners for primary, inspection covers and inner primary, cam and points, lifter blocks, rocker box, intake manifold, exhaust flange studs and nuts, headbolts (four outside for Evolution and Twin Cam engines), motor mounts -- upper, front and rear, transmission side and top covers. FLT/FLH kit includes oil filler and filter mount and sensors; Softail kit includes oil filter plugs and sensors and motor mount spacers. Head-turning 12-point Race Proof design.. p272145 1 on hand More Info/Options for Diamond Engineering The Groove Stainless Engine/Drivetrain Kits p272145 272141

CLEARANCE! Was: $845.99 Now: $507.59 Supreme Legends Tribal +2 in. Chrome Forward Control w/Master Cylinder 16220085 $507.59 Manufacturer: Supreme Legends Dennis Kirk Part #: 573187 Supreme Legends Tribal +2 in. Chrome Forward Control w/Master Cylinder: Manufacturer part # 16220085 - High-quality 6061 billet aluminum construction. Mirror-bright chrome finish. Tribal series includes side-port 11/16 in. bore master cylinder and rigid-mount footpegs. Each style also includes matching shift pegs and brake pegs NOTE: +2 in. extended controls require an extended shift linkage (12.75 in.) and a extended brake line... 16220085 1 on hand More Info/Options for Supreme Legends Tribal +2 in. Chrome Forward Control w/Master Cylinder 16220085

CLEARANCE! Was: $845.99 Now: $507.59 Supreme Legends Tribal +2 in. Chrome Forward Control w/Master Cylinder 16220086 $507.59 Manufacturer: Supreme Legends Dennis Kirk Part #: 573188 Supreme Legends Tribal +2 in. Chrome Forward Control w/Master Cylinder: Manufacturer part # 16220086 - High-quality 6061 billet aluminum construction. Mirror-bright chrome finish. Tribal series includes side-port 11/16 in. bore master cylinder and rigid-mount footpegs. Each style also includes matching shift pegs and brake pegs NOTE: +2 in. extended controls require an extended shift linkage (12.75 in.) and a extended brake line... 16220086 1 on hand More Info/Options for Supreme Legends Tribal +2 in. Chrome Forward Control w/Master Cylinder 16220086

$506.99 Vance & Hines Q-Series Double Barrel Exhaust 18001 $506.99 Manufacturer: Vance & Hines Dennis Kirk Part #: 4402175 Vance & Hines Q-Series Double Barrel Exhaust: Manufacturer part # 18001 - A quieter standard, that's what this Q series is all about -- they're also loaded with features. 100 percent blue-proof technology with 220 degree head pipe and muffler heatshields. Proprietary Power Chamber technology makes for the right horsepower and torque gains through the entire power band. Slash-cut ends finish off the look. Removable baffles. Includes mounts for factory Oxygen sensors. Made in the U.S.A.. , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 18001 1 on hand More Info/Options for Vance & Hines Q-Series Double Barrel Exhaust 18001

$506.99 Cobra Speedster Shorts Exhaust with Powerport 6780 $506.99 Manufacturer: Cobra Dennis Kirk Part #: 4400245 Cobra Speedster Shorts Exhaust with Powerport: Manufacturer part # 6780 - Addition of PowerPort headpipe increases overall performance; similar to a 2-into-1 system. Large 2.5 in., 222 degree, full-length heat shields for a seamless look and no blueing. Beautiful machined billet end caps produce a great look for your bike. Best fit and finish exhaust on the market. Include mounting hardware and removable baffles. Made in the U.S.A.. , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 6780 1 on hand More Info/Options for Cobra Speedster Shorts Exhaust with Powerport 6780

$506.99 Vance & Hines Q-Series Double Barrel Exhaust 18003 $506.99 Manufacturer: Vance & Hines Dennis Kirk Part #: 4402174 Vance & Hines Q-Series Double Barrel Exhaust: Manufacturer part # 18003 - A quieter standard, thats what this Q series is all about -- theyre also loaded with features. 100 percent blue-proof technology with 220 degree head pipe and muffler heatshields. Proprietary Power Chamber technology makes for the right horsepower and torque gains through the entire power band. Slash-cut ends finish off the look. Removable baffles. Includes mounts for factory Oxygen sensors. Made in the U.S.A.. , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 18003 3 on hand More Info/Options for Vance & Hines Q-Series Double Barrel Exhaust 18003

$506.99 Cobra Speedster Shorts Exhaust with Powerport 6781 $506.99 Manufacturer: Cobra Dennis Kirk Part #: 4401440 Cobra Speedster Shorts Exhaust with Powerport: Manufacturer part # 6781 - Addition of PowerPort headpipe increases overall performance; similar to a 2-into-1 system. Large 2.5 in., 222 deg. full-length heat shields for a seamless look and no blueing. Beautiful machined billet end caps produce a great look for your bike. Includes Dual O2 sensor ports. Best fit and finish exhaust on the market. Includes mounting hardware and removable baffles. Made in the U.S.A. , Included Items: , (1) Front Headpipe w/Heatshield, (1) Rear Headpipe w/Heatshield, (1) Bracket, Exhaust Mounting, (5) Clamps (HS24), (2) Clamps (HS28), (2) Clamps (27-61MSC), (1) Muffler; 2 Billet Muffler Tips, (2) Bolts, 5/16 in. x 5/8 in. Flange w/Lock Patch, (3) Bolt-Socket Head, 3/8 in. x 1 in., (2) Screws, 1/4 in. x 3/8 in. Button, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 6781 1 on hand More Info/Options for Cobra Speedster Shorts Exhaust with Powerport 6781

$506.99 Cobra Speedster Shorts Exhaust with PowerPort 6750 $506.99 Manufacturer: Cobra Dennis Kirk Part #: 449349 Cobra Speedster Shorts Exhaust with PowerPort: Manufacturer part # 6750 - Addition of PowerPort headpipe increases overall performance; similar to a 2-into-1 system. Large 2.5 in., 222°, full-length heat shields for a seamless look and no blueing. Beautiful machined billet end caps produce a great look for your bike. Best fit and finish exhaust on the market. Includes mounting hardware and removable baffles. Made in the U.S.A.. , , NOTES: , There is not warranty on exhaust pipes and mufflers with regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing, , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 6750 3 on hand More Info/Options for Cobra Speedster Shorts Exhaust with PowerPort 6750

$506.99 Cobra Speedster Shorts Exhaust with Powerport 6765 $506.99 Manufacturer: Cobra Dennis Kirk Part #: 4402671 Cobra Speedster Shorts Exhaust with Powerport: Manufacturer part # 6765 - Addition of PowerPort headpipe increases overall performance; similar to a 2-into-1 system. Large 2.5 in., 222°, full-length heat shields for a seamless look and no blueing. Beautiful machined billet end caps produce a great look for your bike. Best fit and finish exhaust on the market. Includes mounting hardware and removable baffles. Made in the U.S.A.. , , NOTE: There is not warranty on exhaust pipes and mufflers with regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing.. 6765 Expected Soon More Info/Options for Cobra Speedster Shorts Exhaust with Powerport 6765

$506.99 Cobra Speedster Shorts Exhaust with Powerport 6751 $506.99 Manufacturer: Cobra Dennis Kirk Part #: 4401439 Cobra Speedster Shorts Exhaust with Powerport: Manufacturer part # 6751 - Addition of PowerPort headpipe increases overall performance; similar to a 2-into-1 system. Large 2.5 in., 222°, full-length heat shields for a seamless look and no blueing. Beautiful machined billet end caps produce a great look for your bike. Includes Dual O2 sensor ports. Best fit and finish exhaust on the market. Includes mounting hardware and removable baffles. Made in the U.S.A.. , , Included Items: , (2) Front and Rear Exhaust Headpipe/Heatshield Assembly, (1) Muffler Assembly, (1) Exhaust Bracket, (3) Clamps (HS-24), (2) Clamps (HS-28), (2) Clamps, (2) Bolt Hex 5/16-18 x 5/8 in., (2) Bolt Hex 3/8 x 3/4 in., (2) Screw Buttonhead 1/4-20 x 3/8 in., (1) Screw 3/8-16 x 2.50 in., (1) Screw 1/4-20 x 3.00 in., (1) Short Spacer, (1) Long Spacer, (2) Billet Muffler Tips, , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337, , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 6751 1 on hand More Info/Options for Cobra Speedster Shorts Exhaust with Powerport 6751

$506.99 Vance & Hines Q-Series Double Barrel Exhaust 18005 $506.99 Manufacturer: Vance & Hines Dennis Kirk Part #: 4402177 Vance & Hines Q-Series Double Barrel Exhaust: Manufacturer part # 18005 - A quieter standard, that's what this Q series is all about -- they're also loaded with features. 100 percent blue-proof technology with 220 degree head pipe and muffler heatshields. Proprietary Power Chamber technology makes for the right horsepower and torque gains through the entire power band. Slash-cut ends finish off the look. Removable baffles. Includes mounts for factory Oxygen sensors. Made in the U.S.A.. , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 18005 1 on hand More Info/Options for Vance & Hines Q-Series Double Barrel Exhaust 18005

$506.99 D & M Custom Cycle Twister Air Cleaner 10150104 $506.99 Manufacturer: D & M Custom Cycle Dennis Kirk Part #: 494036 D & M Custom Cycle Twister Air Cleaner: Manufacturer part # 10150104 - Twister-style air cleaner kits with special Drag Specialties-inspired designs. Chrome finish. Increases airflow by 10% over OEM. Accepts all D&M Bullet-style replacement cones. Requires breather kit and carb support bracket (sold separately); mounts on various carbs and fuel-injection systems with optional adapters. Fits Big Twin 90-06 and XL 88-06 with 40mm CV carb or Delphi EFI 01-07.. 10150104 2 on hand More Info/Options for D & M Custom Cycle Twister Air Cleaner 10150104

$506.99 Cobra Speedster Shorts Exhaust with PowerPort 6755 $506.99 Manufacturer: Cobra Dennis Kirk Part #: 449350 Cobra Speedster Shorts Exhaust with PowerPort: Manufacturer part # 6755 - Addition of PowerPort headpipe increases overall performance; similar to a 2-into-1 system. Large 2.5 in., 222°, full-length heat shields for a seamless look and no blueing. Beautiful machined billet end caps produce a great look for your bike. Best fit and finish exhaust on the market. Includes mounting hardware and removable baffles. Made in the U.S.A., , NOTES: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 6755 1 on hand More Info/Options for Cobra Speedster Shorts Exhaust with PowerPort 6755

$505.99 Hawg Halters Inc. 4-Piston Rear Caliper RKSPCC501 $505.99 Manufacturer: Hawg Halters Inc. Dennis Kirk Part #: H190187 Hawg Halters Inc. 4-Piston Rear Caliper: Manufacturer part # RKSPCC501 - These brake calipers feature precision CNC-machined chromed billet aluminum construction, stainless steel pistons and chrome hardware. Quick change design makes for easy pad maintenance. Dual, hidden bleeders for easy bleeding. 4-Piston differential-bore caliper. Chromed billet aluminum brackets are included where required.. RKSPCC501 1 on hand More Info/Options for Hawg Halters Inc. 4-Piston Rear Caliper RKSPCC501

$505.99 Terry Components Starter Motor - 2.0 Kilowatt 773090 $505.99 Manufacturer: Terry Components Dennis Kirk Part #: H20645 Terry Components Starter Motor - 2.0 Kilowatt: Manufacturer part # 773090 - Each Fischer/Terry starter is proven on the dyno before it leaves the factory. Killer motors up to 100 in. take the 1.4 kW starter. Any monster motor will start with the 2.0 kW. 4.4 to 1 gear reduction helps Fischer/Terry starter produce 46% more cranking torque than the stocker. Stronger-than-stock solenoid plunger, return damper and springs; precision-ground and hardened clutch shaft and rollers. Made in the U.S.A., , NOTE: , 2.0 starters cannot be used on FLT 90-06 models with the oil tank under the transmission (unless Part No. H20138 starter spacer block is used) On Softail, Dyna and FXR models, you must relocate oil lines and some wiring. 773090 Expected Soon More Info/Options for Terry Components Starter Motor - 2.0 Kilowatt 773090

$505.99 Terry Components Starter Motor - 2.0 Kilowatt 773094 $505.99 Manufacturer: Terry Components Dennis Kirk Part #: H20642 Terry Components Starter Motor - 2.0 Kilowatt: Manufacturer part # 773094 - Each Fischer/Terry starter is proven on the dyno before it leaves the factory. Killer motors up to 100 in. take the 1.4 kW starter. Any monster motor will start with the 2.0 kW. 4.4 to 1 gear reduction helps Fischer/Terry starter produce 46% more cranking torque than the stocker. Stronger-than-stock solenoid plunger, return damper and springs; precision-ground and hardened clutch shaft and rollers. Made in the U.S.A., , NOTE: , 2.0 starters cannot be used on FLT 90-06 models with the oil tank under the transmission (unless Part No. H20138 starter spacer block is used) On Softail, Dyna and FXR models, you must relocate oil lines and some wiring. 773094 1 on hand More Info/Options for Terry Components Starter Motor - 2.0 Kilowatt 773094