Bostrom Racing Gild Series Street Core Slip-On Stainless Steel Muffler p4400787

This site contains about 139,777 documents.

View by:

Page: 1 90 100 110 120 130 140 150 160 170 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 210 220 230 240 250 260 270 280 290 300 400 500 600 700 800 900 1,000 1,100 2,000 3,000 4,000 4,660

$511.95 Python Staggered Duals Exhaust System 41603 $511.95
Manufacturer: Python
Dennis Kirk Part #: H43220
Python Staggered Duals Exhaust System: Manufacturer part # 41603 - Increase performance throughout your bikes entire rpm range. Subjected to the most stringent testing and development. Headpipes feature a big 1 3/4 in. flow into 2 1/4 in. muffler bodies. Every last drop of horsepower is squeezed out with the hidden crossover system; big performance, bigger sound. Full-coverage, full-length heat shields for a virtually blue proof exhaust; add a 1/4 in. to pipes size for a full 2 1/2 in. muffler body. Repl. front heatshield - H25-055. Repl. rear heatshield H25-056. Embossed Python logo on rear of pipe. Removable baffles. Include all necessary mounting hardware and instructions. , , NOTES: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing.See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 41603
1 on hand

More Info/Options for Python Staggered Duals Exhaust System 41603

$510.99 Edelbrock Performance Series Dual-Purpose Carb 3115 $510.99
Manufacturer: Edelbrock
Dennis Kirk Part #: 16481
Edelbrock Performance Series Dual-Purpose Carb: Manufacturer part # 3115 - Built specifically for high-performance four-stroke engines. Accelerator pump increases throttle response; with easy starting. Super-smooth throttle from sealed 440 stainless steel shaft bearings. Wet-flow tested to ensure the highest performance. Flat slide has been hard anodized for increased life. Bright nickel-plated body. Includes high-quality Motion Pro throttle cables. For replacement cable order 19-6655 Note: , Additional parts needed from Honda dealer to install: for XR650R 2000-2007 requires Honda Power-Up Manifold Part No. I621 I-MBN-640. 3115
1 on hand

More Info/Options for Edelbrock Performance Series Dual-Purpose Carb 3115

CLEARANCE!
Was: $566.99
Now: $510.29
Bostrom Racing Gild Series Street Core Slip-On Stainless Steel Undertail Muffler p4400789 4400799 $510.29
Manufacturer: Bostrom Racing
Dennis Kirk Part #: 4400799
Bostrom Racing Gild Series Street Core Slip-On Stainless Steel Undertail Muffler: Manufacturer part # p4400789 - DennisKirk Part # 4400799 - Endorsed by two top street-racing brothers, Bostrom Racing's Gild series slip-ons are the result of extensive track and R&D testing and are tuned to work perfectly with your bike's stock fuel curve/mapping. State-of-the-art design features stainless steel mid-pipes and show-quality polished stainless steel muffler shells, end caps and tips. 2.5 in. diameter outlet tips have an aggressive 55 deg. slash-cut that screams MotoGP and/or Stunter styling. Muffler shells are extremely lightweight and robotically welded for a seamless fit. 6061 T-6 aluminum billet end caps are CNC-machined from solid material to exacting tolerances. Components are so precisely machined and assembled, that they require only four stainless steel button head screws on each end to secure them. Exit caps are stylishly milled with the Boz Brothers "B" logo and tribal etching. Slip-on has a street core, and is packed exclusively with long-lasting Silent Sport Premium from Germany. Street cores feature 18 in. L muffler shells and 2 in. high-percentage perforated cores to assure a quieter exhaust tone; most average 82-84 dB at idle, 93-95 dB at 5000 rpm (tested statically at 20 in., 45 deg.); under-tail models have shorter mufflers so sound levels will be slightly higher. INCLUDED ITEMS: One muffler mounting bracket with rubber insulator. Two tie straps. One billet servo override Two exhaust springs. One 8mmx-1.25 x 20mm socket head bolts. Two 8mm nylock nuts. Two 8mm flat washers. One instruction sheet. NOTE: This is a general picture the actual exhaust for your motorcycle may differ slightly Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. p4400789
1 on hand

More Info/Options for Bostrom Racing Gild Series Street Core Slip-On Stainless Steel Undertail Muffler p4400789 4400799

CLOSEOUT!
Was: $566.99
Now: $510.29
Bostrom Racing Gild Series Street Core Slip-On Stainless Steel Muffler p4400787 $510.29
Manufacturer: Bostrom Racing
Dennis Kirk Part #: 4400815
Bostrom Racing Gild Series Street Core Slip-On Stainless Steel Muffler: Manufacturer part # p4400787 - Endorsed by two top street-racing brothers, Bostrom Racings Gild series slip-ons are the result of extensive track and R&D testing and are tuned to work perfectly with your bikes stock fuel curve/mapping. State-of-the-art design features stainless steel mid-pipes and show-quality polished stainless steel muffler shells, end caps and tips. 2.5 in. diameter outlet tips have an aggressive 55 deg. slash-cut that screams MotoGP and/or Stunter styling. Muffler shells are extremely lightweight and robotically welded for a seamless fit. 6061 T-6 aluminum billet end caps are CNC-machined from solid material to exacting tolerances. Components are so precisely machined and assembled, that they require only four stainless steel button head screws on each end to secure them. Exit caps are stylishly milled with the Boz Brothers "B" logo and tribal etching. Slip-ons have a street core and is packed exclusively with long-lasting Silent Sport Premium from Germany. Street cores feature 18 in. L muffler shells and 2 in. high-percentage perforated cores to assure a quieter exhaust tone; most average 82-84 dB at idle, 93-95 dB at 5000 rpm (tested statically at 20 in., 45 deg.). INCLUDED ITEMS: One oval muffler with slash cut tip. One muffler hanger strap with rubber liner. One mid pipe. Two exhaust clamps. One billet servo override. One instruction sheet. NOTE: This is a general picture, the actual exhaust for your motorcycle may differ slightly Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. p4400787
1 on hand

More Info/Options for Bostrom Racing Gild Series Street Core Slip-On Stainless Steel Muffler p4400787

CLEARANCE!
Was: $566.99
Now: $510.29
Bostrom Racing Gild Series Street Core Slip-On Stainless Steel Undertail Muffler p4400789 4400791 $510.29
Manufacturer: Bostrom Racing
Dennis Kirk Part #: 4400791
Bostrom Racing Gild Series Street Core Slip-On Stainless Steel Undertail Muffler: Manufacturer part # p4400789 - DennisKirk Part # 4400791 - Endorsed by two top street-racing brothers, Bostrom Racings Gild series slip-ons are the result of extensive track and R&D testing and are tuned to work perfectly with your bikes stock fuel curve/mapping. State-of-the-art design features stainless steel mid-pipes and show-quality polished stainless steel muffler shells, end caps and tips. 2.5 in. diameter outlet tips have an aggressive 55deg. slash-cut that screams MotoGP and/or Stunter styling. Muffler shells are extremely lightweight and robotically welded for a seamless fit. 6061 T-6 aluminum billet end caps are CNC-machined from solid material to exacting tolerances. Components are so precisely machined and assembled, that they require only four stainless steel button head screws on each end to secure them. Exit caps are stylishly milled with the Boz Brothers "B" logo and tribal etching. Slip-on has a street core, and is packed exclusively with long-lasting Silent Sport Premium from Germany. Street cores feature 18" L muffler shells and 2" high-percentage perforated cores to assure a quieter exhaust tone; most average 82-84 dB at idle, 93-95 dB at 5000 rpm (tested statically at 20", 45deg.); under-tail models have shorter mufflers so sound levels will be slightly higher. NOTE: This is a general picture the actual exhaust for your motorcycle may differ slightly Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. p4400789
2 on hand

More Info/Options for Bostrom Racing Gild Series Street Core Slip-On Stainless Steel Undertail Muffler p4400789 4400791

CLEARANCE!
Was: $566.99
Now: $510.29
Bostrom Racing Gild Series High Mount Street Core Slip-On Stainless Steel Muffler p4400813 $510.29
Manufacturer: Bostrom Racing
Dennis Kirk Part #: 4400813
Bostrom Racing Gild Series High Mount Street Core Slip-On Stainless Steel Muffler: Manufacturer part # p4400813 - Endorsed by two top street-racing brothers, Bostrom Racings Gild series slip-ons are the result of extensive track and R&D testing and are tuned to work perfectly with your bikes stock fuel curve/mapping. State-of-the-art design features stainless steel mid-pipes and show-quality polished stainless steel muffler shells, end caps and tips. 2.5 in. diameter outlet tips have an aggressive 55 deg. slash-cut that screams MotoGP and/or Stunter styling. Muffler shells are extremely lightweight and robotically welded for a seamless fit. 6061 T-6 aluminum billet end caps are CNC-machined from solid material to exacting tolerances. Components are so precisely machined and assembled, that they require only four stainless steel button head screws on each end to secure them. Exit caps are stylishly milled with the Boz Brothers "B" logo and tribal etching. Slip-ons have a street core and are packed exclusively with long-lasting Silent Sport Premium from Germany. Street cores feature 18" L muffler shells and 2" high-percentage perforated cores to assure a quieter exhaust tone; most average 82-84 dB at idle, 93-95 dB at 5000 rpm (tested statically at 20 in., 45 deg.) INCLUDED ITEMS: One oval muffler with slash cut tip. One muffler hanger strap with rubber liner. Two pipe clamps. One mounting bracket. One 8mm nylock nut. Two 8mm flat washers. One 8mm-1.25 x 25mm socket head screw. One billet servo override. One instruction sheet. NOTE: This is a general picture, the actual exhaust for your motorcycle may differ slightly Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. p4400813
1 on hand

More Info/Options for Bostrom Racing Gild Series High Mount Street Core Slip-On Stainless Steel Muffler p4400813

CLEARANCE!
Was: $566.99
Now: $510.29
Bostrom Racing Gild Series Street Core Slip-On Stainless Steel Undertail Muffler p4400789 4400793 $510.29
Manufacturer: Bostrom Racing
Dennis Kirk Part #: 4400793
Bostrom Racing Gild Series Street Core Slip-On Stainless Steel Undertail Muffler: Manufacturer part # p4400789 - DennisKirk Part # 4400793 - Endorsed by two top street-racing brothers, Bostrom Racings Gild series slip-ons are the result of extensive track and R&D testing and are tuned to work perfectly with your bikes stock fuel curve/mapping. State-of-the-art design features stainless steel mid-pipes and show-quality polished stainless steel muffler shells, end caps and tips. 2.5 in. diameter outlet tips have an aggressive 55deg. slash-cut that screams MotoGP and/or Stunter styling. Muffler shells are extremely lightweight and robotically welded for a seamless fit. 6061 T-6 aluminum billet end caps are CNC-machined from solid material to exacting tolerances. Components are so precisely machined and assembled, that they require only four stainless steel button head screws on each end to secure them. Exit caps are stylishly milled with the Boz Brothers "B" logo and tribal etching. Slip-on has a street core, and is packed exclusively with long-lasting Silent Sport Premium from Germany. Street cores feature 18" L muffler shells and 2" high-percentage perforated cores to assure a quieter exhaust tone; most average 82-84 dB at idle, 93-95 dB at 5000 rpm (tested statically at 20", 45deg.); under-tail models have shorter mufflers so sound levels will be slightly higher. NOTE: This is a general picture the actual exhaust for your motorcycle may differ slightly Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. p4400789
1 on hand

More Info/Options for Bostrom Racing Gild Series Street Core Slip-On Stainless Steel Undertail Muffler p4400789 4400793

CLOSEOUT!
Was: $566.99
Now: $510.29
Bostrom Racing Gild Series High Mount Street Core Slip-On Stainless Steel Muffler p4400813 4400819 $510.29
Manufacturer: Bostrom Racing
Dennis Kirk Part #: 4400819
Bostrom Racing Gild Series High Mount Street Core Slip-On Stainless Steel Muffler: Manufacturer part # p4400813 - DennisKirk Part # 4400819 - Endorsed by two top street-racing brothers, Bostrom Racings Gild series slip-ons are the result of extensive track and R&D testing and are tuned to work perfectly with your bikes stock fuel curve/mapping. State-of-the-art design features stainless steel mid-pipes and show-quality polished stainless steel muffler shells, end caps and tips. 2.5 in. diameter outlet tips have an aggressive 55 deg. slash-cut that screams MotoGP and/or Stunter styling. Muffler shells are extremely lightweight and robotically welded for a seamless fit. 6061 T-6 aluminum billet end caps are CNC-machined from solid material to exacting tolerances. Components are so precisely machined and assembled, that they require only four stainless steel button head screws on each end to secure them. Exit caps are stylishly milled with the Boz Brothers "B" logo and tribal etching. Slip-ons has a street core and is packed exclusively with long-lasting Silent Sport Premium from Germany. Street cores feature 18" L muffler shells and 2" high-percentage perforated cores to assure a quieter exhaust tone; most average 82-84 dB at idle, 93-95 dB at 5000 rpm (tested statically at 20", 45 deg.). INCLUDED ITEMS: One oval mufler with slash cut tip. One muffler hanger strap with rubber liner. One mid pipe. One mounting bracket. Two pipe clamps. One 8mm-1.25 x 25mm socket head screws. One 8mm nylock nut. One 8mm flat washer. One instruction sheet. NOTE: This is a general picture, the actual exhaust for your motorcycle may differ slightly. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. p4400813
1 on hand

More Info/Options for Bostrom Racing Gild Series High Mount Street Core Slip-On Stainless Steel Muffler p4400813 4400819

CLEARANCE!
Was: $566.99
Now: $510.29
Bostrom Racing Gild Series Race Core Slip-On Stainless Steel Undertail Muffler p4400790 4400794 $510.29
Manufacturer: Bostrom Racing
Dennis Kirk Part #: 4400794
Bostrom Racing Gild Series Race Core Slip-On Stainless Steel Undertail Muffler: Manufacturer part # p4400790 - DennisKirk Part # 4400794 - Endorsed by two top street-racing brothers, Bostrom Racings Gild series slip-ons are the result of extensive track and R&D testing and are tuned to work perfectly with your bikes stock fuel curve/mapping. State-of-the-art design features stainless steel mid-pipes and show-quality polished stainless steel muffler shells, end caps and tips. 2.5 in. diameter outlet tips have an aggressive 55deg. slash-cut that screams MotoGP and/or Stunter styling. Muffler shells are extremely lightweight and robotically welded for a seamless fit. 6061 T-6 aluminum billet end caps are CNC-machined from solid material to exacting tolerances. Components are so precisely machined and assembled, that they require only four stainless steel button head screws on each end to secure them. Exit caps are stylishly milled with the Boz Brothers "B" logo and tribal etching. Slip-on has a street core, and is packed exclusively with long-lasting Silent Sport Premium from Germany. Racing cores feature 15" L muffler shells and 2.5" low-percentage perforated cores for maximum flow and aggressive exhaust tone; most average 85-88 dB at idle; 97-100 dB at 5000 rpm (tested statically at 20", 45deg.); under-tail models have shorter mufflers so sound levels will be slightly higher. NOTE: This is a general picture the actual exhaust for your motorcycle may differ slightly Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. p4400790
3 on hand

More Info/Options for Bostrom Racing Gild Series Race Core Slip-On Stainless Steel Undertail Muffler p4400790 4400794

CLEARANCE!
Was: $566.99
Now: $510.29
Bostrom Racing Gild Series Street Core Slip-On Stainless Steel Undertail Muffler p4400789 $510.29
Manufacturer: Bostrom Racing
Dennis Kirk Part #: 4400789
Bostrom Racing Gild Series Street Core Slip-On Stainless Steel Undertail Muffler: Manufacturer part # p4400789 - Endorsed by two top street-racing brothers, Bostrom Racings Gild series slip-on are the result of extensive track and R&D testing and are tuned to work perfectly with your bikes stock fuel curve/mapping. State-of-the-art design features stainless steel mid-pipes and show-quality polished stainless steel muffler shells, end caps and tips. 2.5 in. diameter outlet tips have an aggressive 55deg. slash-cut that screams MotoGP and/or Stunter styling. Muffler shells are extremely lightweight and robotically welded for a seamless fit. 6061 T-6 aluminum billet end caps are CNC-machined from solid material to exacting tolerances. Components are so precisely machined and assembled, that they require only four stainless steel button head screws on each end to secure them. Exit caps are stylishly milled with the Boz Brothers "B" logo and tribal etching. Slip-on has a street core, and is packed exclusively with long-lasting Silent Sport Premium from Germany. Street cores feature 18" L muffler shells and 2" high-percentage perforated cores to assure a quieter exhaust tone; most average 82-84 dB at idle, 93-95 dB at 5000 rpm (tested statically at 20", 45deg.); under-tail models have shorter mufflers so sound levels will be slightly higher. NOTE: This is a general picture the actual exhaust for your motorcycle may differ slightly Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. p4400789
1 on hand

More Info/Options for Bostrom Racing Gild Series Street Core Slip-On Stainless Steel Undertail Muffler p4400789

$509.99 Cobra Speedster Longs Exhaust with PowerPort 6960 $509.99
Manufacturer: Cobra
Dennis Kirk Part #: 4400215
Cobra Speedster Longs Exhaust with PowerPort: Manufacturer part # 6960 - Addition of PowerPort headpipe increases overall performance; similar to a 2-into-1 system. Large 2.5 in., 222 degree, full-length heat shields for a seamless look and no blueing. Beautiful machined billet end caps produce a great look for your bike. Best fit and finish exhaust on the market. Include mounting hardware and removable baffles. Made in the U.S.A.. , , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of turning characteristics, can timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See chem and lubracations sections for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 6960