Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

5 Performance Machine Domino One-Piece Chrome-Forged Aluminum Wheels

$noprice S&S Twin Cam Oil Pump/Cam Cover 149459 Dennis Kirk Part #: 149459 S&S Twin Cam Oil Pump/Cam Cover 149459: Manufacturer part # 316503 - Revolutionary design replaces stock oil pump, cams, cam support plate, bearing plate, bearings and decorative gear cover. Compatible with S&S and stock Twin Cam style crankcases; for engines without balancers. Oil pressure is regulated after the oil filter, resulting in more consistent engine oil pressure. Increased scavenge capacity means less power loss and heat buildup. Excess oil from pressure relief valve is filtered for longer pump life. Includes a functional, polished solid billet gear cover that supports the outer ends of the cams. Oil pump is designed to be used with special S&S gear drive cams (sold separately). , , NOTE: Not for use with early ignition systems that utilize a cam position sensor.. S and S crankcase breather valve and spring are not included. These pumps are for use in applications where the oil tank is located lower than the oil pump... 316503 2 on Hand More Info/Options for S&S Twin Cam Oil Pump/Cam Cover 149459

$1471.99 Performance Machine Cartel One-Piece Chrome-Forged Aluminum Wheel 554471 Dennis Kirk Part #: 554471 Performance Machine Cartel One-Piece Chrome-Forged Aluminum Wheel 554471: Chrome-plated, lightweight and superstrong forged wheels place the highest material strength in the same direction as the operating load. Applications for most models and custom frame kits. Made in the U.S.A.. , , NOTE: This item ships 3-4 business days after order is placed.. 1 on Hand More Info/Options for Performance Machine Cartel One-Piece Chrome-Forged Aluminum Wheel 554471

$1471.99 Performance Machine Torque One-Piece Chrome-Forged Aluminum Wheels 554470 Dennis Kirk Part #: 554470 Performance Machine Torque One-Piece Chrome-Forged Aluminum Wheels 554470: The highly detailed wheel that will look at home on the cleanest of customs as well as any hardcore chopper. Each spar is a work of art that emerges from the hub in a subtle arc of billet wizardry. A ball-milled profile divides the spoke as it widens and then blends seamlessly into the rim. Chrome-plated, lightweight and superstrong forged wheels place the highest material strength in the same direction as the operating load. Applications for most models and custom frame kits. Made in the U.S.A.. , , Note: This item ships in 3-4 days after the order is placed. 1 on Hand More Info/Options for Performance Machine Torque One-Piece Chrome-Forged Aluminum Wheels 554470

$1471.99 18 x 8.5 Performance Machine Cartel Custom Forged Aluminum Rear Wheel for 3/4 in. Axle Dennis Kirk Part #: 554455 18 x 8.5 Performance Machine Cartel Custom Forged Aluminum Rear Wheel for 3/4 in. Axle: Chrome-plated, lightweight and superstrong forged wheels place the highest material strength in the same direction as the operating load. Applications for most models and custom frame kits. Made in the U.S.A.. , , NOTE: This item ships 3-4 business days after order is placed.. 1 on Hand More Info/Options for 18 x 8.5 Performance Machine Cartel Custom Forged Aluminum Rear Wheel for 3/4 in. Axle

$1471.99 18 x 8.5 Performance Machine Cartel Custom Forged Aluminum Rear Wheel for 1 in. Axle Dennis Kirk Part #: 554458 18 x 8.5 Performance Machine Cartel Custom Forged Aluminum Rear Wheel for 1 in. Axle: Chrome-plated, lightweight and superstrong forged wheels place the highest material strength in the same direction as the operating load. Applications for most models and custom frame kits. Made in the U.S.A.. , , NOTE: This item ships 3-4 business days after order is placed.. 1 on Hand More Info/Options for 18 x 8.5 Performance Machine Cartel Custom Forged Aluminum Rear Wheel for 1 in. Axle

$1471.99 18 x 8.5 Performance Machine Cartel Custom Forged Aluminum Rear Wheel for 3/4 in. Axle Dennis Kirk Part #: 554459 18 x 8.5 Performance Machine Cartel Custom Forged Aluminum Rear Wheel for 3/4 in. Axle: Chrome-plated, lightweight and superstrong forged wheels place the highest material strength in the same direction as the operating load. Applications for most models and custom frame kits. Made in the U.S.A.. , , NOTE: This item ships 3-4 business days after order is placed.. 1 on Hand More Info/Options for 18 x 8.5 Performance Machine Cartel Custom Forged Aluminum Rear Wheel for 3/4 in. Axle

$1445.99 Power House Complete 5-Speed Transmissions for Softail 149336 Dennis Kirk Part #: 149336 Power House Complete 5-Speed Transmissions for Softail 149336: Manufacturer part # 70314 - Cast case finish. Features chrome plated top cover, side cover, shifter rod lever and speedometer sensor block off plate. Includes 32 tooth steel pulley. Gear ratios are the same as OE. Just add oil and hook up up the clutch cable. Includes Manufacturer's Statement of Origin.. 70314 1 on Hand More Info/Options for Power House Complete 5-Speed Transmissions for Softail 149336

$1425.99 Arlen Ness Jagged Ness-Tech Billet Wheels 553141 Dennis Kirk Part #: 553141 Arlen Ness Jagged Ness-Tech Billet Wheels 553141: Manufacturer part # 26-011 - Precision-machined from a single piece of 6061 T-6 aluminum forging and then polished and chrome-plated. Feature sealed bearings with properly sized center spacer. Forged and machined in the U.S.A.. Wheel accept 00-06 style pulleys, , Requires hub adapter, sold separately - order appropriated Part No. listed to fit your model FXST 00-05, FLST 00-06, Part No. H59288 FXST, FXR, FXD, FLST 86-99, Part No. H59284 FXD, FXDWG 00-05, Part No. H550552 FLT 02-06, Part No. H59286 FLT 00-01, Part No. H59287 FLT 86-99, Part No. H59285 18 x 5.5" wheels; stock width swing arm 86-06 w/ 1-1/8" belt, Part No. 553148 18 x 8.5"/10.5" wheels; custom applications 00-06 w/1-1/2" belt and 1" axle, Part No. 553149 Adapter kits feature disc spacers if required, axle spacers and chrome hardware , , This item ships 3-4 business days after order is placed. 26-011 1 on Hand More Info/Options for Arlen Ness Jagged Ness-Tech Billet Wheels 553141

$1425.99 Arlen Ness Hammer Ness-Tech Billet Wheels 553135 Dennis Kirk Part #: 553135 Arlen Ness Hammer Ness-Tech Billet Wheels 553135: Manufacturer part # 26-569 - Precision-machined from a single piece of 6061 T-6 aluminum forging and then polished and chrome-plated. Feature sealed bearings with properly sized center spacer. Forged and machined in the U.S.A.. Wheel accept 00-06 style pulleys, , Requires hub adapter, sold separately - order appropriated Part No. listed to fit your model FXST 00-05, FLST 00-06, Part No. H59288 FXST, FXR, FXD, FLST 86-99, Part No. H59284 FXD, FXDWG 00-05, Part No. H550552 FLT 02-06, Part No. H59286 FLT 00-01, Part No. H59287 FLT 86-99, Part No. H59285 18 x 5.5" wheels; stock width swing arm 86-06 w/ 1-1/8" belt, Part No. 553148 18 x 8.5"/10.5" wheels; custom applications 00-06 w/1-1/2" belt and 1" axle, Part No. 553149 Adapter kits feature disc spacers if required, axle spacers and chrome hardware , , This item ships 3-4 business days after order is placed. 26-569 1 on Hand More Info/Options for Arlen Ness Hammer Ness-Tech Billet Wheels 553135

$1425.99 Arlen Ness Jagged Ness-Tech Billet Wheels 553142 Dennis Kirk Part #: 553142 Arlen Ness Jagged Ness-Tech Billet Wheels 553142: Manufacturer part # 26-012 - Precision-machined from a single piece of 6061 T-6 aluminum forging and then polished and chrome-plated. Feature sealed bearings with properly sized center spacer. Forged and machined in the U.S.A.. Wheel accept 00-06 style pulleys, , Requires hub adapter, sold separately - order appropriated Part No. listed to fit your model FXST 00-05, FLST 00-06, Part No. H59288 FXST, FXR, FXD, FLST 86-99, Part No. H59284 FXD, FXDWG 00-05, Part No. H550552 FLT 02-06, Part No. H59286 FLT 00-01, Part No. H59287 FLT 86-99, Part No. H59285 18 x 5.5" wheels; stock width swing arm 86-06 w/ 1-1/8" belt, Part No. 553148 18 x 8.5"/10.5" wheels; custom applications 00-06 w/1-1/2" belt and 1" axle, Part No. 553149 Adapter kits feature disc spacers if required, axle spacers and chrome hardware , , This item ships 3-4 business days after order is placed. 26-012 1 on Hand More Info/Options for Arlen Ness Jagged Ness-Tech Billet Wheels 553142

$1425.99 18 x 8.5 Arlen Ness Evil 7 Ness-Tech Billet Wheels Dennis Kirk Part #: 551369 18 x 8.5 Arlen Ness Evil 7 Ness-Tech Billet Wheels: Manufacturer part # 26-869 - Precision-machined from a single piece of 6061 T-6 aluminum forging and then polished and chrome-plated. Feature sealed bearings with properly sized center spacer. Forged and machined in the U.S.A.. Wheel accept 00-06 style pulleys, , Requires hub adapter, sold separately - order appropriated Part No. listed to fit your model FXST 00-05, FLST 00-06, Part No. H59288 FXST, FXR, FXD, FLST 86-99, Part No. H59284 FXD, FXDWG 00-05, Part No. H550552 FLT 02-06, Part No. H59286 FLT 00-01, Part No. H59287 FLT 86-99, Part No. H59285 18 x 5.5" wheels; stock width swing arm 86-06 w/ 1-1/8" belt, Part No. 553148 18 x 8.5"/10.5" wheels; custom applications 00-06 w/1-1/2" belt and 1" axle, Part No. 553149 Adapter kits feature disc spacers if required, axle spacers and chrome hardware , , This item ships 3-4 business days after order is placed. 26-869 1 on Hand More Info/Options for 18 x 8.5 Arlen Ness Evil 7 Ness-Tech Billet Wheels

$noprice S&S 95 in. Hot Set-Up Kit w/585G Gear-Driven Cam 149421 Dennis Kirk Part #: 149421 S&S 95 in. Hot Set-Up Kit w/585G Gear-Driven Cam 149421: Manufacturer part # 110051 - Inexpensive way to boost power from 95 in. Twin Cam engines with stock heads. Includes S&S Super E carburetor kit, S&S gear drive cam set, adjustable pushrod kit, S&S 640 in. valve springs, bearings, gaskets and instructions. Require special 3 7/8 in. bore pop up dome pistons (sold separately, part numbers listed below ) which yield a 95 in. cubic-inch displacement and increase the compression ratio to 9.7:1 with stock cylinder heads. Made in the U.S.A., , 95" Pop-Up Piston Kits. Standard part no. 131201S. + .005" part no. 13120105. + .010" part no.1312011. + .020" part no. 1312012. . , , NOTE: We recommend these kits for engines with ported cylinder heads to take advantage of the increased lift of the S&S cams. Kits with the 585G camshafts are recommended for engines with decked cylinder heads and compression ratio of 10:1 to 10.5:1. S&S 95 in. kits may be installed in stock 88 in. engines if the stock 88 in. cylinders are bored from 3 3/4 in. to 3 7/8 in. bore, or if 3 7/8 in. bore cylinders are purchased(DK part no. H14037). , , NOTE: This project requires a skilled technician. It is the responsibility of the person assembling the parts to check all clearances and assembly specifications.. NOTE: This item ships in 3-4 days after the order is placed.. 110051 1 on Hand More Info/Options for S&S 95 in. Hot Set-Up Kit w/585G Gear-Driven Cam 149421

$1425.99 18 x 8.5 Arlen Ness Evil 7 Ness-Tech Billet Wheels Dennis Kirk Part #: 551373 18 x 8.5 Arlen Ness Evil 7 Ness-Tech Billet Wheels: Manufacturer part # 26-879 - Precision-machined from a single piece of 6061 T-6 aluminum forging and then polished and chrome-plated. Feature sealed bearings with properly sized center spacer. Forged and machined in the U.S.A.. Wheel accept 00-06 style pulleys, , Requires hub adapter, sold separately - order appropriated Part No. listed to fit your model FXST 00-05, FLST 00-06, Part No. H59288 FXST, FXR, FXD, FLST 86-99, Part No. H59284 FXD, FXDWG 00-05, Part No. H550552 FLT 02-06, Part No. H59286 FLT 00-01, Part No. H59287 FLT 86-99, Part No. H59285 18 x 5.5" wheels; stock width swing arm 86-06 w/ 1-1/8" belt, Part No. 553148 18 x 8.5"/10.5" wheels; custom applications 00-06 w/1-1/2" belt and 1" axle, Part No. 553149 Adapter kits feature disc spacers if required, axle spacers and chrome hardware , , This item ships 3-4 business days after order is placed. 26-879 1 on Hand More Info/Options for 18 x 8.5 Arlen Ness Evil 7 Ness-Tech Billet Wheels

$1425.99 Arlen Ness Hammer Ness-Tech Billet Wheels 553134 Dennis Kirk Part #: 553134 Arlen Ness Hammer Ness-Tech Billet Wheels 553134: Manufacturer part # 26-579 - Precision-machined from a single piece of 6061 T-6 aluminum forging and then polished and chrome-plated. Feature sealed bearings with properly sized center spacer. Forged and machined in the U.S.A.. Wheel accept 00-06 style pulleys, , Requires hub adapter, sold separately - order appropriated Part No. listed to fit your model FXST 00-05, FLST 00-06, Part No. H59288 FXST, FXR, FXD, FLST 86-99, Part No. H59284 FXD, FXDWG 00-05, Part No. H550552 FLT 02-06, Part No. H59286 FLT 00-01, Part No. H59287 FLT 86-99, Part No. H59285 18 x 5.5" wheels; stock width swing arm 86-06 w/ 1-1/8" belt, Part No. 553148 18 x 8.5"/10.5" wheels; custom applications 00-06 w/1-1/2" belt and 1" axle, Part No. 553149 Adapter kits feature disc spacers if required, axle spacers and chrome hardware , , This item ships 3-4 business days after order is placed. 26-579 1 on Hand More Info/Options for Arlen Ness Hammer Ness-Tech Billet Wheels 553134

$1425.99 H550198 Arlen Ness Psycho Billet Wheel Dennis Kirk Part #: H550198 H550198 Arlen Ness Psycho Billet Wheel: Manufacturer part # 26-679 - Precision-machined from a single piece of 6061 T-6 aluminum forging and then polished and chrome-plated. Feature sealed bearings with properly sized center spacer. Forged and machined in the U.S.A.. Wheel accept 00-06 style pulleys, , Requires hub adapter, sold separately - order appropriated Part No. listed to fit your model FXST 00-05, FLST 00-06, Part No. H59288 FXST, FXR, FXD, FLST 86-99, Part No. H59284 FXD, FXDWG 00-05, Part No. H550552 FLT 02-06, Part No. H59286 FLT 00-01, Part No. H59287 FLT 86-99, Part No. H59285 18 x 5.5" wheels; stock width swing arm 86-06 w/ 1-1/8" belt, Part No. 553148 18 x 8.5"/10.5" wheels; custom applications 00-06 w/1-1/2" belt and 1" axle, Part No. 553149 Adapter kits feature disc spacers if required, axle spacers and chrome hardware , , This item ships 3-4 business days after order is placed. 26-679 1 on Hand More Info/Options for H550198 Arlen Ness Psycho Billet Wheel

$1424.99 18 x 8.5 Performance Machine Tantrum One-Piece Chrome-Forged Aluminum Wheels Dennis Kirk Part #: 553237 18 x 8.5 Performance Machine Tantrum One-Piece Chrome-Forged Aluminum Wheels: Manufacturer part # 12747825BTAN - For 3/4 inch axle . Chrome-plated, lightweight and superstrong forged wheels place the highest material strength in the same direction as the operating load. For custom applications. Made in the U.S.A.. , Custom rear wheels require custom spacing because they have a wider-than-stock hub; rotors and pulleys with a 2.5 inch i.d. flange are also required. , NOTE: This item ships 3 or 4 days after the order is placed.. 12747825BTAN 1 on Hand More Info/Options for 18 x 8.5 Performance Machine Tantrum One-Piece Chrome-Forged Aluminum Wheels

$1424.99 Jim Nasi Customs 190-Series Conversion Cut Rear Fender 392291 Dennis Kirk Part #: 392291 Jim Nasi Customs 190-Series Conversion Cut Rear Fender 392291: Manufacturer part # 1001224 - As one of the most desired custom modifications, a clean lowered look for your bike is now available. Conversion bolt on internal strut rear fender provides the look of a custom for your factory bike. 9 in. JNC Conversion rear fender is compatible with JNC 200mm billet or factory swingarm. All fenders must be pre-fitted before painting. This item ships 3-4 business days after order is placed. 1001224 1 on Hand More Info/Options for Jim Nasi Customs 190-Series Conversion Cut Rear Fender 392291

$1424.99 Performance Machine Wide Hooligan One-Piece Chrome Forged Custom Aluminum Wheel 550540 Dennis Kirk Part #: 550540 Performance Machine Wide Hooligan One-Piece Chrome Forged Custom Aluminum Wheel 550540: Manufacturer part # 12747825HOO1 - For 1 in. Axle . Chrome-plated, lightweight and superstrong forged wheels place the highest material strength in the same direction as operating loads. Custom wheels require custom spacing because they carry a wider-than-stock hub; rotors and pulleys with a 2.50 in. i.d. flange are also required. Made in the U.S.A.. NOTE : This item ships in 3-4 days after the order is placed.. 12747825HOO1 1 on Hand More Info/Options for Performance Machine Wide Hooligan One-Piece Chrome Forged Custom Aluminum Wheel 550540

$1424.99 18 x 8.5 Performance Machine Chrome-Forged Custom Aluminum Wrath Wheels Dennis Kirk Part #: 551282 18 x 8.5 Performance Machine Chrome-Forged Custom Aluminum Wrath Wheels: Manufacturer part # 12747825BWRA - Chrome-plated, lightweight and superstrong forged wheels place the highest material strength in the same direction as operating loads. Offered in 3/4" or 1" axle sizes. Custom wheels require custom spacing because they carry a wider-than-stock hub; rotors and pulleys with a 2.50" i.d. flange are also required. Offered in Villain, Trinity and Hooligan styles. Made in the U.S.A.. NOTE: This item ships 3-4 business days after order is placed. 12747825BWRA 1 on Hand More Info/Options for 18 x 8.5 Performance Machine Chrome-Forged Custom Aluminum Wrath Wheels

$1424.99 18 x 8.5 Performance Machine Chrome-Forged Custom Aluminum Wrath Wheels Dennis Kirk Part #: 551281 18 x 8.5 Performance Machine Chrome-Forged Custom Aluminum Wrath Wheels: Manufacturer part # 12747825WRA1 - Chrome-plated, lightweight and superstrong forged wheels place the highest material strength in the same direction as operating loads. Offered in 3/4" or 1" axle sizes. Custom wheels require custom spacing because they carry a wider-than-stock hub; rotors and pulleys with a 2.50" i.d. flange are also required. Offered in Villain, Trinity and Hooligan styles. Made in the U.S.A.. NOTE: This item ships 3-4 business days after order is placed. 12747825WRA1 1 on Hand More Info/Options for 18 x 8.5 Performance Machine Chrome-Forged Custom Aluminum Wrath Wheels

$1424.99 18 x 8.5 Performance Machine Domino One-Piece Chrome-Forged Aluminum Wheels Dennis Kirk Part #: 553286 18 x 8.5 Performance Machine Domino One-Piece Chrome-Forged Aluminum Wheels: Manufacturer part # 12747825DOM1 - For 1 inch axle . Chrome-plated, lightweight and superstrong forged wheels place the highest material strength in the same direction as the operating load. For custom applications. Made in the U.S.A.. , Custom rear wheels require custom spacing because they have a wider-than-stock hub; rotors and pulleys with a 2.5 inch i.d. flange are also required. , NOTE: This item ships 3 or 4 days after the order is placed.. 12747825DOM1 1 on Hand More Info/Options for 18 x 8.5 Performance Machine Domino One-Piece Chrome-Forged Aluminum Wheels

$1424.99 Jim Nasi Customs 11 in. Internal Strut Rear Fender 392392 Dennis Kirk Part #: 392392 Jim Nasi Customs 11 in. Internal Strut Rear Fender 392392: Manufacturer part # 1001438 - As one of the most desired custom modifications, a clean lowered look at the rear of your bike is now available. Conversion bolt-on internal strut rear fender provides the look of a custom for your factory bike. 11 inch JNC Conversion rear fender is compatible with JNC 250mm billet swingarm only. , , Must be pre-fitted before painting. This item ships 3-4 business days after order is placed.. 1001438 1 on Hand More Info/Options for Jim Nasi Customs 11 in. Internal Strut Rear Fender 392392

$1424.99 Performance Machine Wide Domino One-Piece Chrome-Forged Aluminum Wheel 553283 Dennis Kirk Part #: 553283 Performance Machine Wide Domino One-Piece Chrome-Forged Aluminum Wheel 553283: Manufacturer part # 12747825BDOM - For PM 3/4 in. Axle, 240mm Wide tire, Wide drive swingarm Phatail Kit only; not available thru Dennis Kirk. . Chrome-plated, lightweight and superstrong forged wheels place the highest material strength in the same direction as operating loads. Custom wheels require custom spacing because they carry a wider-than-stock hub; rotors and pulleys with a 2.50 in. i.d. flange are also required. Made in the U.S.A.. NOTE : This item ships in 3-4 days after the order is placed.. 12747825BDOM