|
|
$516.99
Cobra Speedster Slash-Down Exhaust with PowerPort 4401444
Dennis Kirk Part #: 4401444
Cobra Speedster Slash-Down Exhaust with PowerPort 4401444: Manufacturer part # 6881 - Addition of PowerPort headpipe increases overall performance; similar to a 2-into-1 system. Large 2.5 in., 222 degree, full-length heat shields for a seamless look and no blueing. Beautiful machined billet end caps produce a great look for your bike. Includes Dual O2 sensor ports. Best fit and finish exhaust on the market. Include mounting hardware and removable baffles. Made in the U.S.A.. , , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of turning characteristics, can timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See chem and lubracations sections for products that will help prevent or remove blueing.. 6881
1 on Hand
More Info/Options for Cobra Speedster Slash-Down Exhaust with PowerPort 4401444
|
|
|
|
$516.95
Akrapovic Oval Slip-On Muffler With Titanium Muffler Sleeve 4400402
Dennis Kirk Part #: 4400402
Akrapovic Oval Slip-On Muffler With Titanium Muffler Sleeve 4400402: Manufacturer part # SSK6SO3NT - Oval-shaped can with titanium outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. Joint of the inlet cap is milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Conical or cylindrical link pipe is made of stainless steel or titanium; shape is determined on the basis of tests of the connection of the link pipe with the muffler to obtain maximum performance increase. Carbon-fiber heat shield included, if called for in the design. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. , , NOTE: This item ships 3-4 business days after order is placed. SSK6SO3NT
1 on Hand
More Info/Options for Akrapovic Oval Slip-On Muffler With Titanium Muffler Sleeve 4400402
|
|
|
|
$513.99
Kimpex .75 in. Lug Vantage Track 01390
Dennis Kirk Part #: 01390
Kimpex .75 in. Lug Vantage Track 01390: Manufacturer part # 0487175K - The Vantage track is a direct replacement for original tracks. With out studs this track is perfect for trail riding with excellent traction. braking, and rolling resistance. With studs this tracks performance is greatly enhanced by offering improved braking and cornering with greater top end speed, especially in icy conditions. Oversized "clip holes" design. Kimpex's patent design of premolding holes during the molding process has virtually eliminated any damage to vital cording. Also the area around the stud holes is reinforced to help prevent studs pulling through heavy stress. Gold plated clips. 96 premolded 5/16 in. holes. Oversized windows for improved lubrication and longer life of the track slides. Superior lateral stability. , , All track applications have been researched as carefully as possible. If we list one with 1 in. or 1.2 in. tall lug heights for your machine, sufficient clearance exists around the drive axle to the bulk head as best we could determine. Most models 1993 and newer should have sufficient clearance for all tracks listed. On older models, please check clearance before ordering a 1 in. or 1/2 in. lug track. Please be aware that in some cases, especially on newer and mountain versions, some of the tracks we list may have a shorter lug height that original. Measure your old one first to be sure. This is a track conversion to 15 in. wide, includes two 04-149 and two of the 04-150 sprockets which must be used. A third idler wheel must be purchased SEPARATELY #04-37 To install the third idler, machining of the shaft is necessary, if it is not round.. 0487175K
6 on Hand
More Info/Options for Kimpex .75 in. Lug Vantage Track 01390
|
|
|
|
$512.99
Independent Cycle Inc. Universal Gas Tank Base 183042
Dennis Kirk Part #: 183042
Independent Cycle Inc. Universal Gas Tank Base 183042: Manufacturer part # 500-0450 - 16-gauge steel tank base allows you to start with a radius base and then tunnel to fit Independent Cycle Lowlife or Hard life chassis or any other chassis featuring a radius backbone. Fuel crossovers TIG welded into place; four flush mounts and petcock are included. For use with Lowlife and Hard life frames or most radius back custom frames. NOTE: Use in conjunction with Universal Tank Mount PART NO. 18-3038 DIMENISIONS: Length: 35 in.. Width: 15 1/2 in.. Tunnel Length: 33 1/4 in.. TUNNEL WIDTH: Front: 2 1/4 in.. Rear: 2 in.. TUNNEL DEPTH Front: 8 7/8 in.. Rear: 1 1/4 in.. Tank Height: Not Available Fuel Petcock: Left Front Gas Cap Type: Not Available This is a universal gas tank base. 500-0450
1 on Hand
More Info/Options for Independent Cycle Inc. Universal Gas Tank Base 183042
|
|
|
|
CLEARANCE!
Was: $854.99
Now: $512.99
Muzzys Stainless Exhaust with Titanium Canister 448971
Dennis Kirk Part #: 448971
Muzzys Stainless Exhaust with Titanium Canister 448971: Manufacturer part # 141203-02OT - High performance single muffler exhaust system. Exploit your engines full horsepower potential for the street or the track. Muzzys exhaust systems are proven performers, winning both AMA and World Superbike titles including back-to-back AMA Superbike Championships. Systems are rigorously engineered for exact fit and performance. All stainless steel pipes are hand bent and precision welded. 4-into-1 exhaust with replaceable, re-packable baffles. Carburetor re-jetting is recommended for optimum performance-see jet kits. Turn-down end cap. , , NOTE: Stainless/Aluminum system is pictured, , NOTE: , Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product., , NOTE: , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 141203-02OT
1 on Hand
More Info/Options for Muzzys Stainless Exhaust with Titanium Canister 448971
|
|
|
|
|
|
$512.99
Akrapovic Slip-On Muffler w/Stainless Mid-Pipe and Titanium Muffler 433647
Dennis Kirk Part #: 433647
Akrapovic Slip-On Muffler w/Stainless Mid-Pipe and Titanium Muffler 433647: Manufacturer part # SS4SO5MTA - Oval-shaped can with a titanium outer sleeve. Outlet cap is made of titanium while perforated inner sleeve and inlet cap are made of high-quality stainless steel. Flared or conical link pipe is made of stainless steel and welded to the muffler. Link pipe: stock header assembly joint is milled on a state-of-the-art CNC machine and secured by metal clamp and/or high-quality silicon-shielded tempered springs. Anti-seize lead-free copper paste is used to prevent seizing, corrosion and rusting of bolt and joint of the metal clamp made of stainless steel. Includes a lightweight, compact and high-temperature resistant carbon-fiber muffler clamp. Installed aluminum FIM MX 98 dB noise damper conforms to MX regulations. NOTE: Includes spark arrestor. SS4SO5MTA
1 on Hand
More Info/Options for Akrapovic Slip-On Muffler w/Stainless Mid-Pipe and Titanium Muffler 433647
|
|
|
|
$512.99
Yoshimura TRC Tri-Oval Slip-On Muffler with Satin-Finish Titanium Muffler Sleeve 440042
Dennis Kirk Part #: 440042
Yoshimura TRC Tri-Oval Slip-On Muffler with Satin-Finish Titanium Muffler Sleeve 440042: Manufacturer part # 1116278 - All the features of Yoshimura's race-winning TRC exhaust line now in a convenient slip-on package. The tri-oval muffler body design provides superior ground clearance and a unique exhaust note. A newly designed cone end cap features a vent system that dissipates unwanted heat from the exhaust tip; this results in increased performance. Stainless Steel tailpipe and titanium muffler, ,. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1116278
1 on Hand
More Info/Options for Yoshimura TRC Tri-Oval Slip-On Muffler with Satin-Finish Titanium Muffler Sleeve 440042
|
|
|
|
$512.99
Jardine Rumblers Complete Exhaust System 4402086
Dennis Kirk Part #: 4402086
Jardine Rumblers Complete Exhaust System 4402086: Manufacturer part # 14-4909-01S - Top-quality exhaust systems provide a significant horsepower increase. Slash-cut design. Constructed of 15-gauge carbon steel with 1/8" mounting brackets. Dual nickel/chrome-plated. Included Items: , Front Headpipe/Muffler Assembly. Rear Headpipe/Muffler Assemby. Top Heat Shield. Bottom Heat Shield. 3/8-16 x 3/4 in. Hex Head Bolt. 3/8 in. Lock Washer. 3/8 in. Flat Washer. Hose Clamp-8, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 14-4909-01S
1 on Hand
More Info/Options for Jardine Rumblers Complete Exhaust System 4402086
|
|
|
|
|
|
$512.99
H25010 Thunderheader Dual-Style Slip-On Mufflers
Dennis Kirk Part #: H25010
H25010 Thunderheader Dual-Style Slip-On Mufflers: Manufacturer part # 1061 - Designed to give maximum horsepower without sacrificing low-end torque. Anti-reversion design works to impede reverse flow through the system -- reverse flow can contaminate the incoming fuel/air mixture, which reduces performance and throttle response. As reverse flow enters the collector, the diffuser deflects it through vents; the pyramidal trap and aperatures impede the reverse flow, allowing time for the exhaust valve to close. Flow director has equal area at each end, allowing exhaust gases to travel at a constant velocity over the entire length to improve exhauaust scavenging. For Heat Shields order H25-036. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing... 1061
Expected Soon
More Info/Options for H25010 Thunderheader Dual-Style Slip-On Mufflers
|
|
|
|
$512.99
Jardine CompleteSystem 440369
Dennis Kirk Part #: 440369
Jardine CompleteSystem 440369: Manufacturer part # 14-2904-01S - Classic American big-bike styling and distinctive rumble. Highly polished and triple chrome-plated. Custom-fit chrome heat shields are now included as noted when the originals cannot be used. Carburetor re-jetting or fuel injection re-mapping is recommended for most systems and all drag pipes. Baffles are non-removable NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product. NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 14-2904-01S
1 on Hand
More Info/Options for Jardine CompleteSystem 440369
|
|
|
|
|
|
$512.99
Yoshimura RS-5 Slip-On Muffler with Stainless Steel Muffler Sleeve 4401984
Dennis Kirk Part #: 4401984
Yoshimura RS-5 Slip-On Muffler with Stainless Steel Muffler Sleeve 4401984: Manufacturer part # 1505275 - Yoshimura's most cutting-edge exhaust design. RS-5 slip-ons are designed to replicate the lines of the original exhaust, but give your bike the growl of its MotoGP cousin. Improved throttle response and power delivery. Features Yoshimura's trademark fit and finish and cone-style end caps. Stainless steel slip-on design. Includes: tailpipe, muffler, hardware and instructions. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1505275
1 on Hand
More Info/Options for Yoshimura RS-5 Slip-On Muffler with Stainless Steel Muffler Sleeve 4401984
|
|
|
|
$512.99
Akrapovic Slip-On Muffler w/Stainless Mid-Pipe and Titanium Muffler 433646
Dennis Kirk Part #: 433646
Akrapovic Slip-On Muffler w/Stainless Mid-Pipe and Titanium Muffler 433646: Manufacturer part # SS4SO5MT - Oval-shaped can with a titanium outer sleeve. Outlet cap is made of titanium while perforated inner sleeve and inlet cap are made of high-quality stainless steel. Flared or conical link pipe is made of stainless steel and welded to the muffler. Link pipe: stock header assembly joint is milled on a state-of-the-art CNC machine and secured by metal clamp and/or high-quality silicon-shielded tempered springs. Anti-seize lead-free copper paste is used to prevent seizing, corrosion and rusting of bolt and joint of the metal clamp made of stainless steel. Includes a lightweight, compact and high-temperature resistant carbon-fiber muffler clamp. Installed aluminum FIM MX 98 dB noise damper conforms to MX regulations.. SS4SO5MT
1 on Hand
More Info/Options for Akrapovic Slip-On Muffler w/Stainless Mid-Pipe and Titanium Muffler 433646
|
|
|
|
$512.99
Diamond Engineering The Groove Stainless Engine/Drivetrain Kits 272142
Dennis Kirk Part #: 272142
Diamond Engineering The Groove Stainless Engine/Drivetrain Kits 272142: Provide all the fasteners you'll need to assemble and install an entire engine and transmission. Include: case bolts and fasteners for primary, inspection covers and inner primary, cam and points, lifter blocks, rocker box, intake manifold, exhaust flange studs and nuts, headbolts (four outside for Evolution and Twin Cam engines), motor mounts -- upper, front and rear, transmission side and top covers. FLT/FLH kit includes oil filler and filter mount and sensors; Softail kit includes oil filter plugs and sensors and motor mount spacers. Head-turning 12-point Race Proof design..
1 on Hand
More Info/Options for Diamond Engineering The Groove Stainless Engine/Drivetrain Kits 272142
|
|
|
|
$512.99
Jardine CompleteSystem 447465
Dennis Kirk Part #: 447465
Jardine CompleteSystem 447465: Manufacturer part # 14-3903-01S - Classic American big-bike styling and distinctive rumble. Highly polished and triple chrome-plated. Custom-fit chrome heat shields are now included as noted when the originals cannot be used. Carburetor re-jetting or fuel injection re-mapping is recommended for most systems and all drag pipes. Baffles are non-removable NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product. NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 14-3903-01S
1 on Hand
More Info/Options for Jardine CompleteSystem 447465
|
|
|
|
$512.99
Akrapovic Oval Slip-On Muffler With Carbon Fiber Muffler Sleeve 4402384
Dennis Kirk Part #: 4402384
Akrapovic Oval Slip-On Muffler With Carbon Fiber Muffler Sleeve 4402384: Manufacturer part # SSS6SO4T - Oval-shaped can with carbon-fiber outer sleeve. Outlet cap, perforated inner sleeve and inlet cap are all made of titanium. Joint of the inlet cap is milled on a state-of-the-art CNC machine and connected by high-quality silicon-shielded tempered springs. Include a lightweight, compact and high-temperature-resistant carbon-fiber muffler clamp. Conical or cylindrical link pipe is made titanium; shape is determined on the basis of tests of the connection of the link pipe with the muffler to obtain maximum performance increase. Carbon-fiber heat shield included, if called for in the design. , , NOTE: Akrapovic recommends you do not use any acidic cleaning solution (wheel cleaners, etc.) on this product. The use of these chemicals my lead to failure of the front rosettes Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. , , NOTE: This item ships 3-4 business days after order is placed. SSS6SO4T
1 on Hand
More Info/Options for Akrapovic Oval Slip-On Muffler With Carbon Fiber Muffler Sleeve 4402384
|
|
|
|
$512.99
Jardine CompleteSystem 4400147
Dennis Kirk Part #: 4400147
Jardine CompleteSystem 4400147: Manufacturer part # 14-1920-01 - Classic American big-bike styling and distinctive rumble. Highly polished and triple chrome-plated. Custom-fit chrome heat shields are now included as noted when the originals cannot be used. Carburetor re-jetting or fuel injection re-mapping is recommended for most systems and all drag pipes. Baffles are non-removable NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product. NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 14-1920-01
1 on Hand
More Info/Options for Jardine CompleteSystem 4400147
|
|
|
|
$512.99
Kuryakyn Throttle Body and Manifold for 1.8 in. Intake Ports 201592
Dennis Kirk Part #: 201592
Kuryakyn Throttle Body and Manifold for 1.8 in. Intake Ports 201592: Manufacturer part # 439 - For Delphi fuel-injected 2001-05. Get BIG increases in horsepower from this huge, 57mm straight-bore throttle body and high-flow manifold. Lets Delphi fuel-injected motors breathe deep. Throttle body accepts all stock components without modification; bolt-on installation. Retains the stock air cleaner bolt pattern. Can be used with stock cruise control. Engineered by Mike Roland. , , NOTE: Steel fuel supply tube p/n 18-2817 required for Softail models - sold separately, , NOTE: Spacer kit p/n 20-1496 is required for Touring models - sold separately. 439
1 on Hand
More Info/Options for Kuryakyn Throttle Body and Manifold for 1.8 in. Intake Ports 201592
|
|
|
|
$512.99
Kerker Black 4-into-1 Stainless Steel Megaphone Exhaust System 4340
Dennis Kirk Part #: 4340
Kerker Black 4-into-1 Stainless Steel Megaphone Exhaust System 4340: Manufacturer part # 12761001 - The original and still the best choice for 70s to 80s in-line fours. Increased cornering clearance and horsepower coupled with a lighter system results in unbelievable performance. Retains centerstand, oil filter and drain access. Electrostatically applied Ceramicoat 2500. Includes street type baffle. Some carburetor re-jetting may b | |
