|
|
$63.99
EBC Standard CK Clutch Kit 382022
Dennis Kirk Part #: 382022
EBC Standard CK Clutch Kit 382022: Manufacturer part # CK3402 - Cork-based clutch material impregnated with aluminum particles to increase wear life and heat resistance. Clutch drag and swelling is avoided using highly compressed construction. Kit includes complete engine set of friction plates only.. CK3402
1 on Hand
More Info/Options for EBC Standard CK Clutch Kit 382022
|
|
|
|
|
|
|
|
|
|
$63.99
Motion Pro ATV Turbo Throttle Kit 512707
Dennis Kirk Part #: 512707
Motion Pro ATV Turbo Throttle Kit 512707: Manufacturer part # 010398 - Convert from your stock thumb-type throttle to a twist throttle. Each kit includes a polished aluminum Motion Pro Turbo throttle with super smooth, pulley-type operation and throttle cable. Perfect twist ratio for off-road with 28-38mm carb. Includes cable adjuster and rubber dust boot. Turbo throttle and replacement cables also available separately.. 010398
1 on Hand
More Info/Options for Motion Pro ATV Turbo Throttle Kit 512707
|
|
|
|
$63.99
Black/52 in. Magnum 180 degree Braided Custom Brake Lines
Dennis Kirk Part #: 1902280
Black/52 in. Magnum 180 degree Braided Custom Brake Lines: Sames features as the other Chromite II brake lines. Polished stainless braid is more brilliant than regular stainless; Black Pearl braid features black-chrome fittings. 90 degree, 35 degree, or 180 degree 12mm banjo fittings on the master cylinder end of the brake lines. Single-disc brake line in lengths of 36 in. - 74 in.. All lines (except XL 04-07) have a 7/16 in. banjo fitting on the master cylinder end and a 90 degree 3/8 in./10mm banjo fitting on the caliper end; 04-08 XL lines have a 10mm banjo fitting on the master cylinder end and a 10mm 60 degree banjo fitting on the caliper end. , , Included Items:. , 1. (1) brake line 48" with one 10mm 90 degree banjo and one 12mm straight banjo fitting. , 2. (2) 10mm crush washers. , 3. (2) 12mm crush washers..
2 on Hand
More Info/Options for Black/52 in. Magnum 180 degree Braided Custom Brake Lines
|
|
|
|
$63.99
Nelson-Rigg Silver Streak Strap Mount Tank Bag 505676
Dennis Kirk Part #: 505676
Nelson-Rigg Silver Streak Strap Mount Tank Bag 505676: Manufacturer part # SSC130 - Mounts using a secure quick-release, three-point mounting system. Expandable storage with detachable map pocket. Side pockets to store your smaller items. Under-lid office organizer. Measures 8 in. L x 1-3/4 in. W x 5 in. H. NOTE: This bag is mounted using three nylon 1" quick clip straps there are two on the rear, single on the front. In addition to the straps there are three d-rings as well. Rear of the bag has one and the ront has two... SSC130
4 on Hand
More Info/Options for Nelson-Rigg Silver Streak Strap Mount Tank Bag 505676
|
|
|
|
$63.99
48 in. Magnum 35 degree Braided Custom Brake Lines
Dennis Kirk Part #: 1902265
48 in. Magnum 35 degree Braided Custom Brake Lines: Sames features as the other Chromite II brake lines. Polished stainless braid is more brilliant than regular stainless; Black Pearl braid features black-chrome fittings. 90 degree, 35 degree, or 180 degree 12mm banjo fittings on the master cylinder end of the brake lines. Single-disc brake line in lengths of 36 in. - 74 in.. All lines (except XL 04-07) have a 7/16 in. banjo fitting on the master cylinder end and a 90 degree 3/8 in./10mm banjo fitting on the caliper end; 04-08 XL lines have a 10mm banjo fitting on the master cylinder end and a 10mm 60 degree banjo fitting on the caliper end. Crush washers and instruction sheet included..
1 on Hand
More Info/Options for 48 in. Magnum 35 degree Braided Custom Brake Lines
|
|
|
|
$63.99
4/115/10/3+5/8 ITP T-9 Series Black Spun Wheels
Dennis Kirk Part #: 553038
4/115/10/3+5/8 ITP T-9 Series Black Spun Wheels: Manufacturer part # 1025340536 - High-performance series designed to meet rugged ATV standards. .190 in. wall construction. Built with state-of-the-art CNC spinning equipment. .455 in. valve stem hole. Lug Nut Required: Flat. Front Only: Polaris Big Boss 250 4x6 1989-93. Polaris Big Boss 300 6x6 1994. Polaris Big Boss 500 6x6 1998-99. Polaris Cyclone 250X 1987. Polaris Magnum 325 2x4/4x4 2000-02. Polaris Magnum 425 2x4/4x4 1995-98. Polaris Magnum 425 6x6 1996-97. Polaris Magnum 500 4x4 1999-00 (all). Polaris Magnum 500 4x4 2001. Polaris Magnum 500 RMK 4x4 2001. Polaris Predator 500 2004 and 2006 (all). Polaris Predator 500 2005. Polaris Predator 500 Troy Lee/Limited Edition. Polaris Scrambler 400 2x4 2000-02. Polaris Scrambler 400 4x4 1995-00. Polaris Scrambler 400X 4x4 2002-03. Polaris Scrambler 500 2x4 2001-02. Polaris Scrambler 500 4x4 1997-06. Polaris Scrambler 500 4x4 Freedom 2002. Polaris Scrambler 500X 4x4 2001. Polaris Sport 400 1998-99. Polaris Sport 400L 1994-97. Polaris Sportsman 400 4x4 1994-97. Polaris Trail Blazer 250 1990-95 and 1999-06. Polaris Trail Blazer 250ES 1996-98. Polaris Trail Blazer 250 Freedom 2002. Polaris Trail Boss 250/2x4 1985-99. Polaris Trail Boss 250 4x4 1987-92. Polaris Trail Boss 250R/ES 1987-89. Polaris Trail Boss 325 2000-03. Polaris Trail Boss 350L 2x4/4x4 1990-92. Polaris 2x4/4x4 300 1994-95. Polaris 2x4/4x4 350L 1993. Polaris 2x4 400L 1994-95. Polaris 4x4 400L 1994. Polaris Xpedition 325 2000-03. Polaris Xpedition 425 4x4 2000-03. Polaris Xplorer 300 4x4 1996-99. Polaris Xplorer 300 1996-99. Polaris Xplorer 400 4x4 1996-02. Polaris Xpress 400L 1996-97. Yamaha YFB250 Timberwolf 4x4 1994-00. Yamaha YFM200DX Moto 4 1986-89. Yamaha YFM225 Moto 4 1986-88. Yamaha YFM350/R Raptor 2004-07 (all). Yamaha YFM350ER Moto 4 1987-92. Yamaha YFM350X Warrior 1987-04. Yamaha YFM660R Raptor 2001-05. Yamaha YFM660RLE Raptor Limited Edition 2002-05. Yamaha YFM700 Raptor 2006-07 (all). Yamaha YFS200 Blaster 1988-06 (all). Yamaha YFZ350 Banshee 1991-06 (all). Yamaha YFZ450 2004-07 (all). All other models not listed above are Front and Rear. 1025340536
1 on Hand
More Info/Options for 4/115/10/3+5/8 ITP T-9 Series Black Spun Wheels
|
|
|
|
|
|
|
|
$63.99
Russell Racer Front Brake Line Kit 1900365
Dennis Kirk Part #: 1900365
Russell Racer Front Brake Line Kit 1900365: Manufacturer part # R09380 - Stainless steel braided lines are a necessity on the track. Kits include two Cycleflex brake lines that connect directly to the master cylinder and all parts necessary for a complete line swap. Teflon inner liner with stainless steel outer jacket provides resistance to expansion that firms up braking power and response. , , Note: Kit is engineered to replace the three front line system on dual disc applications, eliminates the use of the junction block, each line connects directly from the master cylinder to the caliper enhancing braking efficiency... R09380
1 on Hand
More Info/Options for Russell Racer Front Brake Line Kit 1900365
|
|
|
|
|
|
|
|
$63.99
SLP Brake Pads 194358
Dennis Kirk Part #: 194358
SLP Brake Pads 194358: Manufacturer part # 27-80 - Semi-metallic SL 452501 high-performance carbon/Kevlar GG-rated compound is excellent for race conditions. Work in any weather or temperature conditions. Reduce brake lever pressure. Won't damage rotors; require minimal break-in time.. 27-80
1 on Hand
More Info/Options for SLP Brake Pads 194358
|
|
|
|
|
|
|
|
$63.99
Stainless Steel/48 in. Magnum 180 degree Braided Custom Brake Lines
Dennis Kirk Part #: 1902278
Stainless Steel/48 in. Magnum 180 degree Braided Custom Brake Lines: Sames features as the other Chromite II brake lines. Polished stainless braid is more brilliant than regular stainless; Black Pearl braid features black-chrome fittings. 90 degree, 35 degree, or 180 degree 12mm banjo fittings on the master cylinder end of the brake lines. Single-disc brake line in lengths of 36 in. - 74 in.. All lines (except XL 04-07) have a 7/16 in. banjo fitting on the master cylinder end and a 90 degree 3/8 in./10mm banjo fitting on the caliper end; 04-08 XL lines have a 10mm banjo fitting on the master cylinder end and a 10mm 60 degree banjo fitting on the caliper end. , , Included Items:. , 1. (1) brake line 48" with one 10mm 90 degree banjo and one 12mm straight banjo fitting. , 2. (2) 10mm crush washers. , 3. (2) 12mm crush washers..
2 on Hand
More Info/Options for Stainless Steel/48 in. Magnum 180 degree Braided Custom Brake Lines
|
|
|
|
$63.99
Sno-Stuff Gradient Graphics Style Windshield 24431
Dennis Kirk Part #: 24431
Sno-Stuff Gradient Graphics Style Windshield 24431: Manufacturer part # 450-161-03 - Sno Stuff windshields match originals exactly. Tough, cold-resistant .075 in. thick butyrate material. Precision cut and formed with permanently attached trim molding. Mounting O-rings, dart screws and grommets available separately. Note: All windshields are protected with plastic shrinkwrap for shipping. Before removing, be certain that you are going to keep it. Windshields with plastic wrap removed are not returnable. 450-161-03
Expected Soon
More Info/Options for Sno-Stuff Gradient Graphics Style Windshield 24431
|
|
|
|
$63.99
Sunstar Sprocket 38
Dennis Kirk Part #: 80554238S
Sunstar Sprocket 38: Manufacturer part # 2632338 - High quality, all steel sprockets meet the demands of todays highest horsepower machines. Powerdrive countershaft (front) sprockets are manufactured from case-hardened chromoly steel for the ultimate in strength and durability. They also receive a parkerizing surface treatment for rust and corrosion resistance. Sunstar steel rear sprockets are manufactured from the highest quality 1045 high-carbon steel, and most are heat treated for added strength and wear resistance. Computer designed weight reduction holes are included where possible. Most rear sprockets are zinc plated, and some have a baked-on durable paint for corrosion resistance. Many conversions are available from unpopular 632 and 532 sizes to 630 and 530 sizes for better chain selection, as well as other lighter-weight options for racing. Any time you use other than the standard front/rear sprocket sizes, clearance must be checked. When converting to a smaller chain size, especially for racing, be sure to use the highest grade 0-ring chain available (non-O-ring heavy-duty acceptable for drag racing). NOTE: To convert to 530 chain, order a Part Number 80-068- front sprocket and 80-035- rear sprocket. The following models must use a 6mm (.24") thick washer on the countershaft sprocket (acquire locally); GS750 80-83 - all and GS1000/1100/1150 - all.. 2632338
1 on Hand
More Info/Options for Sunstar Sprocket 38
|
|
|
|
$63.99
41.19 in. Magnum Sterling Chromite® II Braided Idle/Cruise Cables For Custom Height/Width Handlebars
Dennis Kirk Part #: H192764
41.19 in. Magnum Sterling Chromite® II Braided Idle/Cruise Cables For Custom Height/Width Handlebars: Manufacturer part # 34303 - State of the art throttle and idle cables by Magnum. Patented Sterling Chromite® II metal braiding has a tough enamel coating for no scratch application and lasting, chrome-like brilliancy. Advanced multi-strand design for superior flexibility. Polyethylene inner lining ensures smooth, trouble-free operation. PVC and high-temperature polyester moisture barrier under the braiding keeps out the elements and prolongs life. Replaces OEM #56351-96 (stock length for models listed). Chrome fittings. , NOTE: Length given is length of outer housing only, excluding elbows, , NOTE: Not for fuel-injected models except those listed, , NOTE: All pre-96 cables have threaded elbows; 96 and later cables have non-threaded elbows NOTE: Will also fit Dresser 2001-2007 as alternative length cable NOTE: The length of this cable is 38 in. (check your length) Specs: Elbow: 90 degrees Travel: 4 7/8 in. Tailpiece length: 9 1/2 in.. 34303
1 on Hand
More Info/Options for 41.19 in. Magnum Sterling Chromite® II Braided Idle/Cruise Cables For Custom Height/Width Handlebars
|
|
|
|
|
|
$63.99
Saddlemen Sissy Bar Pad 505116
Dennis Kirk Part #: 505116
Saddlemen Sissy Bar Pad 505116: Manufacturer part # 0408Y - Gravestone w/ chrome spots for Saddlement Explorer Special, Take Charge and LoBoy seats. Match all Saddlemen seats. Can be mounted to Harley-Davidson accessory sissy bars and most aftermarket brands with a 5 in. width. Include chromed mounting brackets. 6 1/2 in. H x 6 1/2. W. 0408Y
| |
