Suomy Replica Spec 1R KTSPAR3XL, Suomy Replica Spec 1R KTSPARLG

This site contains about 139,902 documents.

View by:

Page: 1 70 80 90 100 110 120 130 140 150 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 190 200 210 220 230 240 250 260 300 400 500 600 700 800 900 1,000 1,100 2,000 3,000 4,000 4,664

$550.99 Scorpion Oval Slip-on Muffler with Satin Titanium Muffler Sleeve TR 62 $550.99
Manufacturer: Scorpion
Dennis Kirk Part #: 4401258
Scorpion Oval Slip-on Muffler with Satin Titanium Muffler Sleeve : Manufacturer part # TR 62 - For the 06 Daytona 675 Scorpion have developed the underseat silencer in all finish options. This silencer is designed to not only look great but sound great too. Included Items: , (1) SC-69 Slip-On Silencer, (12) M6 nyloc nuts, (2) 51-55mm band clamp, (1) Silencer strap, (1) Protective rubber strip, (1) Connecting pipe, (2) M5 x 15mm cap head bolts, (2) M5 nyloc nuts, (2) M6 x 25mm button head bolts, (2) M6 x 16mm button head bolts, (2) long bracket, (1) Small stepped bracket, (2) Tie back, (4) M6 x 12mm button head bolts, (2) Washer bobbins NOTE: Fits Triumph Daytona 675 2006 Race Only Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. TR 62
1 on hand

More Info/Options for Scorpion Oval Slip-on Muffler with Satin Titanium Muffler Sleeve TR 62

$550.99 Supertrapp Mean Mothers Standard Drag Pipes 138-72470 $550.99
Manufacturer: Supertrapp
Dennis Kirk Part #: 449096
Supertrapp Mean Mothers Standard Drag Pipes: Manufacturer part # 138-72470 - An attractive, new version of the Mean Mothers exhaust system that incorporates a slew of new features and produces industry-leading horsepower and torque increases. Pre-installed baffles are easily removed, rugged and simplified bracket system carries fewer pieces and preinstalled heat shields feature OEM fasteners. OEM fasteners on the heatshield can be removed, and the heatshield can be replaced. Include standard end cap. Optional slash-cut (449101), turn-out (449100) and standard replacement (449099) end caps available separately, , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 138-72470
1 on hand

More Info/Options for Supertrapp Mean Mothers Standard Drag Pipes 138-72470

$550.99 Scorpion Oval Satin Titanium Slip-On Muffler w/Stainless Steel Tailpipe KA 77 $550.99
Manufacturer: Scorpion
Dennis Kirk Part #: 4402184
Scorpion Oval Satin Titanium Slip-On Muffler w/Stainless Steel Tailpipe: Manufacturer part # KA 77 - High-performance mufflers that have been dyno- and track-proven to increase overall performance; very high mid-range performance boosts. Model-specific designs require no re-mapping or re-jetting. Stainless steel inner components. Space-technology sound absorption; never requires repacking and offers consistent sound. Oxygen Lambda sensor connectors are fitted for models that require sensors. . Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. KA 77
Expected Soon

More Info/Options for Scorpion Oval Satin Titanium Slip-On Muffler w/Stainless Steel Tailpipe KA 77

$550.99 Supertrapp Mean Mothers Staggered Drag Pipes 138-72472 $550.99
Manufacturer: Supertrapp
Dennis Kirk Part #: 449095
Supertrapp Mean Mothers Staggered Drag Pipes: Manufacturer part # 138-72472 - An attractive, new version of the Mean Mothers exhaust system that incorporates a slew of new features and produces industry-leading horsepower and torque increases. Pre-installed baffles are easily removed, rugged and simplified bracket system carries fewer pieces and preinstalled heat shields feature OEM fasteners. OEM fasteners on the heatshield can be removed, and the heatshield can be replaced. Include standard end cap. Optional slash-cut (449101), turn-out (449100) and standard replacement (449099) end caps available separately, , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 138-72472
Expected Soon

More Info/Options for Supertrapp Mean Mothers Staggered Drag Pipes 138-72472

$550.99 Roadhouse Long Classic 2 into 1 Exhaust System 59110 $550.99
Manufacturer: Roadhouse
Dennis Kirk Part #: 449734
Roadhouse Long Classic 2 into 1 Exhaust System: Manufacturer part # 59110 - Dynamometer tested for superior performance with up to 30% increase in horsepower. Feature 2 1/4 in. diameter retro-style serrated headpipe covers with die-cast coupler to hide any discoloration or blueing. Deep meaty rumble without being overly loud. 1 1/2 in. diameter headpipe for increased exhaust gas velocity/torque. Slip-fit 4 in. diameter polished chrome muffler canister with interchangeable tips (come with standard tip). High-flow performance 2-into-1 merge-style collector. Removable 2 in. diameter core with high-temperature fiber packing (optional cores available) - Quiet Core - 449686, Performance Core - 44-01594. Include detailed instructions, mounting hardware and gaskets. Provide clearance for larger saddlebags over stock exhaust. Optional interchangeable tips available for customized look (sold separately), Large Slash - 44-9702, Shark Fin - 44-9703, Cadillac - 44-9704, Standard - 44-9705. , NOTE: Manifold exhaust gaskets are not included, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 59110
Expected Soon

More Info/Options for Roadhouse Long Classic 2 into 1 Exhaust System 59110

$550.99 Scorpion Oval Underseat Slip-On Muffler with Carbon Fiber Muffler Sleeve HA79 $550.99
Manufacturer: Scorpion
Dennis Kirk Part #: 4400627
Scorpion Oval Underseat Slip-On Muffler with Carbon Fiber Muffler Sleeve: Manufacturer part # HA79 - High-performance mufflers that have been dyno- and track-proven to increase overall performance; very high mid-range performance boosts. Model-specific designs require no re-mapping or re-jetting. Stainless steel inner components. Space-technology sound absorption; never requires repacking and offers consistent sound. O2 Lambda sensor connectors are fitted for models that require sensors. INCLUDED ITEMS: One 2004 fireblade silencer. Two 51-55mm band clamps. One silencer stainless steel strap. One protective rubber strap. One connecting pipe. One instruction sheet. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. HA79
1 on hand

More Info/Options for Scorpion Oval Underseat Slip-On Muffler with Carbon Fiber Muffler Sleeve HA79

$550.99 Samson Road Stealth Mufflers MS-200 $550.99
Manufacturer: Samson
Dennis Kirk Part #: H44097
Samson Road Stealth Mufflers: Manufacturer part # MS-200 - These 3 1/2 in. mufflers provide a marked performance increase without the added sound. Non-removable quiet baffles lower the sound by 5-8 decibels over other performance mufflers. Feature engraved end caps with a double wall design. Mounting hardware and instructions also included. Sold in pairs. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See lubrication product pages in the back of this catalog for products that will help prevent or remove blueing.. MS-200
1 on hand

More Info/Options for Samson Road Stealth Mufflers MS-200

$550.99 Roadhouse Classic 2 into 1 Exhaust System 59120 $550.99
Manufacturer: Roadhouse
Dennis Kirk Part #: 449735
Roadhouse Classic 2 into 1 Exhaust System: Manufacturer part # 59120 - Dynamometer tested for superior performance with up to 30% increase in horsepower. Feature 2 1/4 in. diameter retro-style serrated headpipe covers with die-cast coupler to hide any discoloration or blueing. Deep meaty rumble without being overly loud. 1 1/2 in. diameter headpipe for increased exhaust gas velocity/torque. Slip-fit 4 in. diameter polished chrome muffler canister with interchangeable tips (come with standard tip). High-flow performance 2-into-1 merge-style collector. Removable 2" diameter core with high-temperature fiber packing (optional cores available); Quiet Core - 44-9686, Performance Core - 44-01594. Include detailed instructions, mounting hardware and gaskets. Provide clearance for larger saddlebags over stock exhaust. Optional interchangeable tips available for customized look (sold separately), Large Slash - 44-9702, Shark Fin 44-9703, Cadillac 44-9704, Standard - 44-9705. , NOTE: Manifold exhaust gaskets are not included, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 59120
2 on hand

More Info/Options for Roadhouse Classic 2 into 1 Exhaust System 59120

$550.95 Akrapovic Street Legal Line Oval Slip-On Muffler With Titanium Muffler Sleeve SSK6SO3HNT $550.95
Manufacturer: Akrapovic
Dennis Kirk Part #: 4400407
Akrapovic Street Legal Line Oval Slip-On Muffler With Titanium Muffler Sleeve: Manufacturer part # SSK6SO3HNT - State-of-the-art designs and materials provide low weight, legal sound levels and high performance along with the recognizable Akrapovic sound. Satisfy all conditions for exhaust system noise levels and safety; conform to the strict EU regulations for street use. Improves the performance of your engine. Highest quality materials and workmanship. Weight savings over stock system, , CAUTION: Akrapovic recommends you do not use any acidic cleaning solution (wheel cleaners, etc.) on this product. The use of these chemicals may lead to failure of the front rosette(s) , ,. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with any questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or Power Commander is recommended please see the Chems/Lubes section or perform a search using your make, model and year for products available, ,. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration , , NOTE: This item ships 3-4 business days after order is placed. SSK6SO3HNT
1 on hand

More Info/Options for Akrapovic Street Legal Line Oval Slip-On Muffler With Titanium Muffler Sleeve SSK6SO3HNT

$549.99 Lonestar Racing Rear Swingarm 154020041120 $549.99
Manufacturer: Lonestar Racing
Dennis Kirk Part #: 58770
Lonestar Racing Rear Swingarm: Manufacturer part # 154020041120 - Constructed of strong 4130 Chromoly steel and precision TIG welded to ensure long life. Lighter, stronger and far more attractive than stock. Improves the traction and stability of your quad. Available in -1 in. to +4 in. lengths to suit almost any application. Round housing design makes chain adjustment quick and simple.. 154020041120
1 on hand

More Info/Options for Lonestar Racing Rear Swingarm 154020041120

$549.99 Thunderheader 2-into-1 System 1027 $549.99
Manufacturer: Thunderheader
Dennis Kirk Part #: H44024
Thunderheader 2-into-1 System: Manufacturer part # 1027 - Designed to give maximum horsepower without sacrificing low-end torque. 2-into-1 systems with patented collector design that directs spent exhaust gases in a spiral motion through four acoustical damping chambers. Exhaust travels through these chambers at high velocity to scavenge spent exhaust gases from the combustion chamber and bring in a fresh charge of air/fuel mixture. Anti-reversion design works to impede reverse flow through the system -- reverse flow can contaminate the incoming fuel/air mixture, which reduces performance and throttle response. As reverse flow enters the collector, the diffuser deflects it through vents; the pyramidal trap and apertures impede the reverse flow, allowing time for the exhaust valve to close. Flow director has equal area at each end, allowing exhaust gases to travel at a constant velocity over the entire length to improve exhaust scavenging. For heat shields, order the following: H25012, 31 in. top front; H25011, 24 in. top rear; H25029, 13.5 in. collector , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing.. 1027
2 on hand

More Info/Options for Thunderheader 2-into-1 System 1027

$549.99 Lonestar Racing Rear Swingarm 154020011121 $549.99
Manufacturer: Lonestar Racing
Dennis Kirk Part #: 594138
Lonestar Racing Rear Swingarm: Manufacturer part # 154020011121 - Constructed of strong 4130 Chromoly steel and precision TIG welded to ensure long life. Lighter, stronger and far more attractive than stock. Improves the traction and stability of your quad. Available in -1 in. to +4 in. lengths to suit almost any application. Round housing design makes chain adjustment quick and simple.. 154020011121
1 on hand

More Info/Options for Lonestar Racing Rear Swingarm 154020011121

$549.95 Drag Specialties 41mm Deuce-Style Fork Leg Assembly R21600A $549.95
Manufacturer: Drag Specialties
Dennis Kirk Part #: H58294
Drag Specialties 41mm Deuce-Style Fork Leg Assembly: Manufacturer part # R21600A - Complete assemblies include stock-length fork tubes, chrome lower legs, dust covers, bushings, springs, damper tubes and seals. Lower legs have vertical fender mounting holes. Accept 00-05 style single-disc brake. Sold in pairs. Does not include fork oil. , This item ships 3-4 days after the order is placed.. R21600A
1 on hand

More Info/Options for Drag Specialties 41mm Deuce-Style Fork Leg Assembly R21600A

$549.95 Suomy Replica Spec 1R KTSPAR3XL $549.95
Manufacturer: Suomy
Dennis Kirk Part #: 3302449XXXL
Suomy Replica Spec 1R: Manufacturer part # KTSPAR3XL - DOT and B.S.I. 6658 Type A (British Standards Institution) certified; race-approved by every major U.S. motorcycle race organization. Helmet shell is a lightweight bag-molded Kevlar/fiberglass shell that is structurally enhanced with a composite fiber weave. Three shell types used throughout size range for optimal fit. Dynamically variable resistance crush zones and advanced channel EPS maximize ventilation and impact energy absorption. Exceptionally quiet ride from special sound-absorbing polymers. High-quality paint and graphics under a protective clear-coat finish. Removable, washable DuPont Turinda hypoallergenic comfort lining. Adjustable chin ventilation and ultra-high-efficiency top diffuser vent. Oversize sponge cervical neck roll. Included breath guard is removable. Clear, anti-scratch, anti-fog face shield is optically correct; optional race shields have posts for tear-offs. Safety lock visor system. D-ring helmet strap with strap button. Size medium helmet weighs 3 lb., 2 oz.. Comes with clear face shield.. KTSPAR3XL
1 on hand