|
|
$1619.99
KR Tuned Titanium Full Exhaust System 4401815
Dennis Kirk Part #: 4401815
KR Tuned Titanium Full Exhaust System 4401815: Manufacturer part # 606102399 - Designed by the Kenny Roberts MotoGP race engineers. Extreme-performance exhaust offers maximum flow and the best possible lean angles. Headers are constructed of lightweight stainless steel with TIG welds for durability. Special canister shape is designed to hug your bike to maximize lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 606102399
1 on Hand
More Info/Options for KR Tuned Titanium Full Exhaust System 4401815
|
|
|
|
$1619.99
KR Tuned Carbon Fiber Full Exhaust System 4401828
Dennis Kirk Part #: 4401828
KR Tuned Carbon Fiber Full Exhaust System 4401828: Manufacturer part # 803052300 - Designed by the Kenny Roberts MotoGP race engineers. Extreme-performance exhaust offers maximum flow and the best possible lean angles. Headers are constructed of lightweight stainless steel with TIG welds for durability. Special canister shape is designed to hug your bike to maximize lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 803052300
1 on Hand
More Info/Options for KR Tuned Carbon Fiber Full Exhaust System 4401828
|
|
|
|
$1619.99
KR Tuned Titanium Full Exhaust System 4401823
Dennis Kirk Part #: 4401823
KR Tuned Titanium Full Exhaust System 4401823: Manufacturer part # 806072399 - Designed by the Kenny Roberts MotoGP race engineers. Extreme-performance exhaust offers maximum flow and the best possible lean angles. Headers are constructed of lightweight stainless steel with TIG welds for durability. Special canister shape is designed to hug your bike to maximize lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 806072399
1 on Hand
More Info/Options for KR Tuned Titanium Full Exhaust System 4401823
|
|
|
|
$1619.99
KR Tuned Carbon Fiber Full Exhaust System 4401820
Dennis Kirk Part #: 4401820
KR Tuned Carbon Fiber Full Exhaust System 4401820: Manufacturer part # 605092300 - Designed by the Kenny Roberts MotoGP race engineers. Extreme-performance exhaust offers maximum flow and the best possible lean angles. Headers are constructed of lightweight stainless steel with TIG welds for durability. Special canister shape is designed to hug your bike to maximize lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 605092300
1 on Hand
More Info/Options for KR Tuned Carbon Fiber Full Exhaust System 4401820
|
|
|
|
$1619.99
KR Tuned Titanium Full Exhaust System 4402947
Dennis Kirk Part #: 4402947
KR Tuned Titanium Full Exhaust System 4402947: Designed by the Kenny Roberts MotoGP race engineers. Extreme-performance exhaust offers maximum flow and the best possible lean angles. Headers are constructed of lightweight stainless steel with TIG welds for durability. Special canister shape is designed to hug your bike to maximize lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing..
Expected Soon
More Info/Options for KR Tuned Titanium Full Exhaust System 4402947
|
|
|
|
$1619.99
KR Tuned Carbon Fiber Full Exhaust System 4401816
Dennis Kirk Part #: 4401816
KR Tuned Carbon Fiber Full Exhaust System 4401816: Manufacturer part # 606102300 - Designed by the Kenny Roberts MotoGP race engineers. Extreme-performance exhaust offers maximum flow and the best possible lean angles. Headers are constructed of lightweight stainless steel with TIG welds for durability. Special canister shape is designed to hug your bike to maximize lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 606102300
1 on Hand
More Info/Options for KR Tuned Carbon Fiber Full Exhaust System 4401816
|
|
|
|
$1619.99
KR Tuned Titanium Full Exhaust System 4403021
Dennis Kirk Part #: 4403021
KR Tuned Titanium Full Exhaust System 4403021: Designed by the Kenny Roberts MotoGP race engineers. Extreme-performance exhaust offers maximum flow and the best possible lean angles. Headers are constructed of lightweight stainless steel with TIG welds for durability. Special canister shape is designed to hug your bike to maximize lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing..
1 on Hand
More Info/Options for KR Tuned Titanium Full Exhaust System 4403021
|
|
|
|
$1619.99
KR Tuned Carbon Fiber Full Exhaust System 4403020
Dennis Kirk Part #: 4403020
KR Tuned Carbon Fiber Full Exhaust System 4403020: Designed by the Kenny Roberts MotoGP race engineers. Extreme-performance exhaust offers maximum flow and the best possible lean angles. Headers are constructed of lightweight stainless steel with TIG welds for durability. Special canister shape is designed to hug your bike to maximize lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing..
1 on Hand
More Info/Options for KR Tuned Carbon Fiber Full Exhaust System 4403020
|
|
|
|
$1619.99
KR Tuned Titanium Full Exhaust System 4401827
Dennis Kirk Part #: 4401827
KR Tuned Titanium Full Exhaust System 4401827: Manufacturer part # 803052399 - Designed by the Kenny Roberts MotoGP race engineers. Extreme-performance exhaust offers maximum flow and the best possible lean angles. Headers are constructed of lightweight stainless steel with TIG welds for durability. Special canister shape is designed to hug your bike to maximize lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 803052399
1 on Hand
More Info/Options for KR Tuned Titanium Full Exhaust System 4401827
|
|
|
|
$1619.99
KR Tuned Carbon Fiber Full Exhaust System 4401824
Dennis Kirk Part #: 4401824
KR Tuned Carbon Fiber Full Exhaust System 4401824: Manufacturer part # 806072300 - Designed by the Kenny Roberts MotoGP race engineers. Extreme-performance exhaust offers maximum flow and the best possible lean angles. Headers are constructed of lightweight stainless steel with TIG welds for durability. Special canister shape is designed to hug your bike to maximize lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 806072300
1 on Hand
More Info/Options for KR Tuned Carbon Fiber Full Exhaust System 4401824
|
|
|
|
$1619.99
KR Tuned Titanium Full Exhaust System 4401819
Dennis Kirk Part #: 4401819
KR Tuned Titanium Full Exhaust System 4401819: Manufacturer part # 605092399 - Designed by the Kenny Roberts MotoGP race engineers. Extreme-performance exhaust offers maximum flow and the best possible lean angles. Headers are constructed of lightweight stainless steel with TIG welds for durability. Special canister shape is designed to hug your bike to maximize lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 605092399
1 on Hand
More Info/Options for KR Tuned Titanium Full Exhaust System 4401819
|
|
|
|
$1619.99
KR Tuned Carbon Fiber Full Exhaust System 4402946
Dennis Kirk Part #: 4402946
KR Tuned Carbon Fiber Full Exhaust System 4402946: Designed by the Kenny Roberts MotoGP race engineers. Extreme-performance exhaust offers maximum flow and the best possible lean angles. Headers are constructed of lightweight stainless steel with TIG welds for durability. Special canister shape is designed to hug your bike to maximize lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing..
Expected Soon
More Info/Options for KR Tuned Carbon Fiber Full Exhaust System 4402946
|
|
|
|
$1619.99
KR Tuned Titanium Full Exhaust System 4402951
Dennis Kirk Part #: 4402951
KR Tuned Titanium Full Exhaust System 4402951: Designed by the Kenny Roberts MotoGP race engineers. Extreme-performance exhaust offers maximum flow and the best possible lean angles. Headers are constructed of lightweight stainless steel with TIG welds for durability. Special canister shape is designed to hug your bike to maximize lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing..
Expected Soon
More Info/Options for KR Tuned Titanium Full Exhaust System 4402951
|
|
|
|
$1619.99
GMA Engineering 1 1/2 in. Wide Inside-Out Brake/Pulley System 805404
Dennis Kirk Part #: 805404
GMA Engineering 1 1/2 in. Wide Inside-Out Brake/Pulley System 805404: Manufacturer part # GMABPST1 - Features a direct bolt-on design; no welding or machining. Combines the rear brake system with the drive pulley. Allows for a clean, open view of the rear wheel. System includes a polished, CNC-machined billet aluminum 70-tooth pulley, a chrome ductile floating rotor, a chrome 4-piston caliper assembly with brackets and a stainless steel brake line. Pulley has a ducted fan design to help cool the caliper and rotor. Fits with stock swingarm using 16-, 17- and 18-inch wheels with OEM pulley bolt pattern. A rear pulley spacer is available for converting the GMA 1 1/2" pulley to 1 1/8" when running a narrow belt. Matching front rotors are available separately (DS-360227, DS-360228, DS-330060 / DS-330061). Inside-out brake/pulley systems use replacement brake pads PART #DS-350064. Made the in U.S.A.. , NOTE: U.S. Des. Patent #6,283,255, NOTE: Year application listed for right side drive customs refers to the style of pulley/rotor and caliper used in this kit., NOTE: Some Softail models with 61- or 65-tooth rear pulleys may require the use of 132-tooth rear belt and 70-tooth upper and lower belt guards., NOTE: May require custom axle spacers when used with wide rims or custom applications. NOTE: This item ships in 3-4 days after the order is placed.. GMABPST1
1 on Hand
More Info/Options for GMA Engineering 1 1/2 in. Wide Inside-Out Brake/Pulley System 805404
|
|
|
|
$1614.99
Performance Machine Tantrum Forged Aluminum Rear Wheels 553343
Dennis Kirk Part #: 553343
Performance Machine Tantrum Forged Aluminum Rear Wheels 553343: Inspired by the popularity of high performance urban style bikes, PM has refined their proven forged aluminum wheels for the needs of the modern sportbike. Chrome forged aluminum for strength, durability and show-quality good looks. Chrome-plated for durability and lasting beauty. Work with stock brake calipers and discs. Include Performance Machine cush drive. Made in the U.S.A.. NOTE: Shaft-driven wheel, not compatible with rear sprockets NOTE: This item ships in 3-4 days after the order is placed.
1 on Hand
More Info/Options for Performance Machine Tantrum Forged Aluminum Rear Wheels 553343
|
|
|
|
$1614.99
Performance Machine Domino Forged Aluminum Rear Wheels 554710
Dennis Kirk Part #: 554710
Performance Machine Domino Forged Aluminum Rear Wheels 554710: Chrome forged aluminum for strength, durability and show-quality good looks. Chrome-plated for durability and lasting beauty. Available in Domino style. Work with stock brake calipers and discs. Rear wheels measure 17" x 6.0". Include Performance Machine cush drive. Made in the U.S.A.. , NOTE: All wheels use the common bolt pattern for the ZX10/ZX12 01-04 rear sprockets NOTE: Shaft-driven wheel, not compatible with rear sprockets NOTE: This item ships 3 or 4 days after the order is placed.
1 on Hand
More Info/Options for Performance Machine Domino Forged Aluminum Rear Wheels 554710
|
|
|
|
$1614.99
Performance Machine Domino Forged Aluminum Rear Wheels 553345
Dennis Kirk Part #: 553345
Performance Machine Domino Forged Aluminum Rear Wheels 553345: Chrome forged aluminum for strength, durability and show-quality good looks. Chrome-plated for durability and lasting beauty. Available in Domino style. Work with stock brake calipers and discs. Rear wheels measure 17" x 6.0". Include Performance Machine cush drive. Made in the U.S.A.. , NOTE: All wheels use the common bolt pattern for the ZX10/ZX12 01-04 rear sprockets NOTE: Shaft-driven wheel, not compatible with rear sprockets NOTE: This item ships 3 or 4 days after the order is placed.
1 on Hand
More Info/Options for Performance Machine Domino Forged Aluminum Rear Wheels 553345
|
|
|
|
$1614.99
Performance Machine Cartel Forged Aluminum Street Rear Wheels 554707
Dennis Kirk Part #: 554707
Performance Machine Cartel Forged Aluminum Street Rear Wheels 554707: Strong, durable forged aluminum construction with chrome plating. 17 in. x 6.0 in. rear wheels. Compatible with stock discs and calipers. Performance Machine cush drive included. Street rear wheels available in an 18" x 8.5" or 18" x 10.5" super-wide style; fit 240mm tires and need Trac Dynamics swingarms; see BODY section. Made in the U.S.A.. NOTE: Use common belt pattern for the ZX1000C Ninja ZX-10R/ZX1200A/B Ninja ZX-12R 01-04 rear sprockets NOTE: For bikes equipped with Trac Dynamics swingarm (300mm tire) NOTE: Hayabusa configuration NOTE: This item ships 3 or 4 days after the order is placed.
1 on Hand
More Info/Options for Performance Machine Cartel Forged Aluminum Street Rear Wheels 554707
|
|
|
|
$1614.99
Performance Machine Tantrum Forged Aluminum Rear Wheels 554709
Dennis Kirk Part #: 554709
Performance Machine Tantrum Forged Aluminum Rear Wheels 554709: Inspired by the popularity of high performance urban style bikes, PM has refined their proven forged aluminum wheels for the needs of the modern sportbike. Chrome forged aluminum for strength, durability and show-quality good looks. Chrome-plated for durability and lasting beauty. Work with stock brake calipers and discs. Include Performance Machine cush drive. Made in the U.S.A.. NOTE: Shaft-driven wheel, not compatible with rear sprockets NOTE: This item ships in 3-4 days after the order is placed.
1 on Hand
More Info/Options for Performance Machine Tantrum Forged Aluminum Rear Wheels 554709
|
|
|
|
$1614.99
Performance Machine Cartel Forged Aluminum Street Rear Wheels 554702
Dennis Kirk Part #: 554702
Performance Machine Cartel Forged Aluminum Street Rear Wheels 554702: Strong, durable forged aluminum construction with chrome plating. 17 in. x 6.0 in. rear wheels. Compatible with stock discs and calipers. Performance Machine cush drive included. Street rear wheels available in an 18" x 8.5" or 18" x 10.5" super-wide style; fit 240mm tires and need Trac Dynamics swingarms; see BODY section. Made in the U.S.A.. NOTE: Use common belt pattern for the ZX1000C Ninja ZX-10R/ZX1200A/B Ninja ZX-12R 01-04 rear sprockets NOTE: For bikes equipped with Trac Dynamics swingarm (300mm tire) NOTE: Hayabusa configuration NOTE: This item ships 3 or 4 days after the order is placed.
1 on Hand
More Info/Options for Performance Machine Cartel Forged Aluminum Street Rear Wheels 554702
|
|
|
|
$1614.99
Performance Machine Forged Aluminum Rear Wheels 554708
Dennis Kirk Part #: 554708
Performance Machine Forged Aluminum Rear Wheels 554708: Inspired by the popularity of high performance urban style bikes, PM has refined their proven forged aluminum wheels for the needs of the modern sportbike. Chrome forged aluminum for strength, durability and show-quality good looks. Chrome-plated for durability and lasting beauty. Work with stock brake calipers and discs. Include Performance Machine cush drive. Made in the U.S.A.. NOTE: Shaft-driven wheel, not compatible with rear sprockets NOTE: This item ships in 3-4 days after the order is placed.
1 on Hand
| |
