Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

Hard Krome 3 in, Hard Krome 2 3, Hard Krome Res-Tec 3 in, 2 in

$612.99 Hawg Halters Inc. Left Side Driveside Brake Calipers RKDSLCC300 $612.99 Manufacturer: Hawg Halters Inc. Dennis Kirk Part #: 198443 Hawg Halters Inc. Left Side Driveside Brake Calipers: Manufacturer part # RKDSLCC300 - Caliper bodies are CNC machined from solid billet 6061 T-6 aluminum. Standard-bore stainless steel pistons are CNC machined to exacting tolerances. Drive-side brake kit includes necessary bracket, weld-on mounting tabs, hardware and instructions. Rotor hat kit sold separately- 1/8 in. offset 198445, 1/4 in. offset 198447, 3/8 in. offset 198446, 1/2 in. offset 198448. Require minimum 18" x 5 1/2" wide billet wheel or 18" x 8 1/2" spoke wheel. Will work with up to a 1 1/2" belt. For either 1 in. or 3/4 in. axle. Note: Wheels designed for use with driveside brake caliper kits do not require the use of a rotor hat, , NOTE: This item ships 3-4 business days after order is placed. RKDSLCC300 1 on hand More Info/Options for Hawg Halters Inc. Left Side Driveside Brake Calipers RKDSLCC300

$612.99 Hawg Halters Inc. Right Side Driveside Brake Calipers RKDSRCC300 $612.99 Manufacturer: Hawg Halters Inc. Dennis Kirk Part #: 198444 Hawg Halters Inc. Right Side Driveside Brake Calipers: Manufacturer part # RKDSRCC300 - Caliper bodies are CNC machined from solid billet 6061 T-6 aluminum. Standard-bore stainless steel pistons are CNC machined to exacting tolerances. Drive-side brake kit includes necessary bracket, weld-on mounting tabs, hardware and instructions. Rotor hat kit sold separately- 1/8 in. offset 198445, 1/4 in. offset 198447, 3/8 in. offset 198446, 1/2 in. offset 198448. Require minimum 18" x 5 1/2" wide billet wheel or 18" x 8 1/2" spoke wheel. Will work with up to a 1 1/2" belt. For either 1 in. or 3/4 in. axle. Note: Wheels designed for use with driveside brake caliper kits do not require the use of a rotor hat, , NOTE: This item ships 3-4 business days after order is placed. RKDSRCC300 1 on hand More Info/Options for Hawg Halters Inc. Right Side Driveside Brake Calipers RKDSRCC300

$612.99 GMA Engineering 1 1/2 in. Rear Belt Pulley DRPLY $612.99 Manufacturer: GMA Engineering Dennis Kirk Part #: 80513670 GMA Engineering 1 1/2 in. Rear Belt Pulley: Manufacturer part # DRPLY - Polished, CNC-machined billet 70-tooth pulleys with chrome outer ring. Features ducted fan design to assist cooling and match GMA wheels and rotors. Available for 1 1/2" or 1 1/8" belt widths. Made in the U.S.A... DRPLY 1 on hand More Info/Options for GMA Engineering 1 1/2 in. Rear Belt Pulley DRPLY

$612.95 Hard Krome Res-Tec 3 in. Drag Pipe 47B-6050 $612.95 Manufacturer: Hard Krome Dennis Kirk Part #: 4401844 Hard Krome Res-Tec 3 in. Drag Pipe: Manufacturer part # 47B-6050 - 3 inch dia. mufflers constructed using RES-TEC (Reduced Exhaust Sound TEChnology) and patented True Doublewall Construction (U.S. Patent # 6,408,980). Features a stepped header design that progressively steps up from 1 3/4 inch to 1 7/8 inch to 2 inch. Comes with a RES-TEC muffler cartridge to reduce exhaust sound while maintaining performance. Included Items:. , 1. (1) Front and Rear Pipes. , 2. (1) Mounting bracket. , 3. (4) 3/8-16 hex head bolts. , 4. (3) 8 X 1.25 hex head bolts. , 5. (4) 3/8-16 square nuts. , 6. (3) 8 X 1.25 nylock nuts. , 7. (4) Lock washers. , 8. (4) Flat washers. , 9. (1) Instructions, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 47B-6050 1 on hand More Info/Options for Hard Krome Res-Tec 3 in. Drag Pipe 47B-6050

$612.95 Hard Krome Res-Tec 3 in. Drag Pipes 47B-6060 $612.95 Manufacturer: Hard Krome Dennis Kirk Part #: 4401845 Hard Krome Res-Tec 3 in. Drag Pipes: Manufacturer part # 47B-6060 - 3 inch dia. mufflers constructed using RES-TEC (Reduced Exhaust Sound TEChnology) and patented True Doublewall Construction (U.S. Patent # 6,408,980). Features a stepped header design that progressively steps up from 1 3/4 inch to 1 7/8 inch to 2 inch. Comes with a RES-TEC muffler cartridge to reduce exhaust sound while maintaining performance. Included Items: , (1) Complete Exhaust System, (1) Support Bracket, (4) Square Nuts, (4) 3/8 in. x 1 in. Hex Bolts, (4) 3/8 in. Flat Washers, (4) 3/8 in. Lock Washers, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 47B-6060 1 on hand More Info/Options for Hard Krome Res-Tec 3 in. Drag Pipes 47B-6060

$612.95 Hard Krome 3 in. Big Straights with Hard-Tips p4402731 $612.95 Manufacturer: Hard Krome Dennis Kirk Part #: 4402727 Hard Krome 3 in. Big Straights with Hard-Tips : Manufacturer part # p4402731 - These pipes make a statement that bigger is better. Same style as pictured shown except it is black. Outside diameter measures 3 in. with a 1 3/4 in. inside diameter on most models. CNC-machined straight-cut Hard-Tips billet end caps included. Includes Boost Port technology - Boost Port is a cross-over system that connects two exhaust pipes together. Optional CNC-machined tapered (order 44-8256) or slash-cut (order 44-8253) Hard-Tips provide a custom look. To change sound and performance, optional perforated (order 44-8263) or straight-thru (order 44-8259) baffles can also be used). , , Included Items: , (2) Drag pipe, (1) Mounting bracket, (6) 3/8 in.-16 x 3/4 in. Hex bolts, (6) 3/8 in.-16 Square nuts, (6) 3/8 in. Lock plates, (6) 3/8 in. Flat washers. NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing. p4402731 1 on hand More Info/Options for Hard Krome 3 in. Big Straights with Hard-Tips p4402731

$612.95 Hard Krome Res-Tec 3 in. Drag Pipe 47B-8025 $612.95 Manufacturer: Hard Krome Dennis Kirk Part #: 4401846 Hard Krome Res-Tec 3 in. Drag Pipe: Manufacturer part # 47B-8025 - 3 in. dia. mufflers constructed using RES-TEC (Reduced Exhaust Sound TEChnology) and patented True Doublewall Construction (U.S. Patent # 6,408,980). Features a stepped header design that progressively steps up from 1 3/4 in. to 1 7/8 in. to 2 in.. Comes with a RES-TEC muffler cartridge to reduce exhaust sound while maintaining performance. Muffler cartridges are removable. Ceramic matte Black Star finish. Includes:, 2 - head pipes/mufflers, 1 - support bracket, 4 - 3/8 in. x 1 in. hex bolts, 4 - 3/8 in. lock washers, 4 - flat washers, 4 - 3/8 in. square nuts>, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 47B-8025 1 on hand More Info/Options for Hard Krome Res-Tec 3 in. Drag Pipe 47B-8025

$612.95 Hard Krome 3 in. Big Straights with Hard-Tips p4402731 4402746 $612.95 Manufacturer: Hard Krome Dennis Kirk Part #: 4402746 Hard Krome 3 in. Big Straights with Hard-Tips : Manufacturer part # p4402731 - DennisKirk Part # 4402746 - These pipes make a statement that bigger is better. Outside diameter measures 3 in. with a 1 3/4 in. inside diameter on most models. CNC-machined straight-cut Hard-Tips billet end caps included. Includes Boost Port technology - Boost Port is a cross-over system that connects two exhaust pipes together. Optional CNC-machined tapered (order 44-8256) or slash-cut (order 44-8253) Hard-Tips provide a custom look. To change sound and performance, optional perforated (order 44-8263) or straight-thru (order 44-8259) baffles can also be used. NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing. p4402731 Expected Soon More Info/Options for Hard Krome 3 in. Big Straights with Hard-Tips p4402731 4402746

$612.95 Hard Krome Res-Tec 3 in. Drag Pipe 47B-2035 $612.95 Manufacturer: Hard Krome Dennis Kirk Part #: 4401835 Hard Krome Res-Tec 3 in. Drag Pipe: Manufacturer part # 47B-2035 - 3" dia. mufflers constructed using RES-TEC (Reduced Exhaust Sound TEChnology) and patented True Doublewall Construction (U.S. Patent # 6,408,980). Features a stepped header design that progressively steps up from 1 3/4" to 1 7/8" to 2". Comes with a RES-TEC muffler cartridge to reduce exhaust sound while maintaining performance. Muffler cartridges are removable. Ceramic matte Black Star finish. Included Items: , (2) Drag Pipes, (2) Mounting Brackets, (4) 3/8 in. Square Nuts, (4) 3/8-16 x 3/4 in. Hex Head Bolts, (4) 3/8 in. Lock Washers, (4) 3/8 in. Flat Washers, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by warranty. 47B-2035 1 on hand More Info/Options for Hard Krome Res-Tec 3 in. Drag Pipe 47B-2035

$612.95 Hard Krome Res-Tec 3 in. Drag Pipe 47B-8060 $612.95 Manufacturer: Hard Krome Dennis Kirk Part #: 4401935 Hard Krome Res-Tec 3 in. Drag Pipe: Manufacturer part # 47B-8060 - 3" dia. mufflers constructed using RES-TEC (Reduced Exhaust Sound TEChnology) and patented True Doublewall Construction (U.S. Patent # 6,408,980). Features a stepped header design that progressively steps up from 1 3/4" to 1 7/8" to 2". Comes with a RES-TEC muffler cartridge to reduce exhaust sound while maintaining performance. Muffler cartridges are removable. Ceramic matte Black Star finish>, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 47B-8060 2 on hand More Info/Options for Hard Krome Res-Tec 3 in. Drag Pipe 47B-8060

$612.95 Hard Krome 2 3/4 in. Big Straights with Hard-Tips 49-4040B $612.95 Manufacturer: Hard Krome Dennis Kirk Part #: 4400362 Hard Krome 2 3/4 in. Big Straights with Hard-Tips : Manufacturer part # 49-4040B - Let the world know you mean business with these large diameter drag pipes. Outer pipe measures 2 3/4 in. diameter; 1 3/4 in. inside pipe diameter. CNC-machined straight-cut Hard-Tips billet end caps included. Customize with optional CNC-machined Hard-Tip end caps, Taper Style - 4-8257, Slash-Cut - 44-8254. Optional Straight-thru baffles - 44-8260. Replacement standard Spiral type baffles - 44-8270. Polished chrome finish. Includes Boost Port technology - Boost Port is a system that connects two exhaust pipe together. INCLUDED ITEMS: Two drag pipes. One mounting bracket. Four 3/8 in. x 5/8 in. hex head bolts. Four 3/8 in. square nuts. Four 3/8 in. flat washers. Four 3/8 in. lock washers. Two 8mm-1.25 hex nuts. One instruction sheet. , , NOTE: , Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product., , NOTE: , Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 49-4040B 2 on hand More Info/Options for Hard Krome 2 3/4 in. Big Straights with Hard-Tips 49-4040B

$612.95 Hard Krome 3 in. Big Straights with Hard-Tips 45-4080 $612.95 Manufacturer: Hard Krome Dennis Kirk Part #: 4402783 Hard Krome 3 in. Big Straights with Hard-Tips : Manufacturer part # 45-4080 - These pipes make a statement that bigger is better. Outside diameter measures 3 in. with a 1 3/4 in. inside diameter on most models. CNC-machined straight-cut Hard-Tips billet end caps included. Optional CNC-machined tapered (order 44-8256) or slash-cut (order 44-8253) Hard-Tips provide a custom look. To change sound and performance, optional perforated (order 44-8263) or straight-thru (order 44-8259) baffles can also be used. , , Included Items: , (2) Exhaust Pipes, (1) Mounting Bracket, (1) L-Bracket, (4) 3/8 in.-16 x 3/4 in. Hex Head Bolts, (4) 3/8 in.-16 Nuts, (4) 3/8 in. Flat Washers, (4) 3/8 in. Lock Washers. NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing. 45-4080 1 on hand More Info/Options for Hard Krome 3 in. Big Straights with Hard-Tips 45-4080

$612.95 Hard Krome Res-Tec 3 in. Drag Pipe 47B-2070 $612.95 Manufacturer: Hard Krome Dennis Kirk Part #: 4401836 Hard Krome Res-Tec 3 in. Drag Pipe: Manufacturer part # 47B-2070 - 3" dia. mufflers constructed using RES-TEC (Reduced Exhaust Sound TEChnology) and patented True Doublewall Construction (U.S. Patent # 6,408,980). Features a stepped header design that progressively steps up from 1 3/4" to 1 7/8" to 2". Comes with a RES-TEC muffler cartridge to reduce exhaust sound while maintaining performance. Muffler cartridges are removable. Ceramic matte Black Star finish. Included Items: , (1) Complete Exhaust System, (1) Support Bracket, (4) Square Nuts, (4) 3/8 in. x 1 in. Hex Bolts, (4) 3/8 in. Flat Washers, (4) 3/8 in. Lock Washers, (2) Rubber Bolt Caps, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by warranty. 47B-2070 1 on hand More Info/Options for Hard Krome Res-Tec 3 in. Drag Pipe 47B-2070

$612.95 Hard Krome Res-Tec 3 in. Drag Pipe 47B-8070 $612.95 Manufacturer: Hard Krome Dennis Kirk Part #: 4401847 Hard Krome Res-Tec 3 in. Drag Pipe: Manufacturer part # 47B-8070 - 3 inch dia. mufflers constructed using RES-TEC (Reduced Exhaust Sound TEChnology) and patented True Doublewall Construction (U.S. Patent # 6,408,980). Features a stepped header design that progressively steps up from 1 3/4 inch to 1 7/8 inch to 2 inch. Comes with a RES-TEC muffler cartridge to reduce exhaust sound while maintaining performance. Muffler Cartridges are removable. Ceramic matte Black Star finish. , INCLUDED ITEMS: , (1) Complete Exhaust System, (1) Support Bracket, (4) Square Nuts, (4) 3/8 in. x 1 in. Hex Bolts, (4) 3/8 in. Flat Washers, (4) 3/8 in. Lock Washers>, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 47B-8070 1 on hand More Info/Options for Hard Krome Res-Tec 3 in. Drag Pipe 47B-8070

$612.95 Hard Krome 2 3/4 in. Big Straights with Hard-Tips 49-4050B $612.95 Manufacturer: Hard Krome Dennis Kirk Part #: 4400363 Hard Krome 2 3/4 in. Big Straights with Hard-Tips : Manufacturer part # 49-4050B - Let the world know you mean business with these large diameter drag pipes. Outer pipe measures 2 3/4 in. diameter; 1 3/4 in. inside pipe diameter. CNC-machined straight-cut Hard-Tips billet end caps included. Customize with optional hard-tip end caps:, Taper Syle - 44-8257, Slash-Cut - 44-8254. Optional straight-thru baffles - part no: 44-8260. Replacement standard spiral type baffles - part no: 44-8270. Polished chrome finish. Includes Boost Port technology, Boost Port is a cross-over system that connects two exhaust pipes together. , , NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration, , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, over heating,etc. and is not caused by defective manufacturing, , See lubrication products for products that will help prevent or remove blueing.. 49-4050B 1 on hand More Info/Options for Hard Krome 2 3/4 in. Big Straights with Hard-Tips 49-4050B

$612.95 Hard Krome Res-Tec 3 in. Drag Pipe 47B-2080 $612.95 Manufacturer: Hard Krome Dennis Kirk Part #: 4401837 Hard Krome Res-Tec 3 in. Drag Pipe: Manufacturer part # 47B-2080 - 3" dia. mufflers constructed using RES-TEC (Reduced Exhaust Sound TEChnology) and patented True Doublewall Construction (U.S. Patent # 6,408,980). Features a stepped header design that progressively steps up from 1 3/4" to 1 7/8" to 2". Comes with a RES-TEC muffler cartridge to reduce exhaust sound while maintaining performance. , INCLUDED ITEMS: , (2) Head Pipes/Mufflers, (1) Support Bracket, (4) 3/8 in. x 1 in. Hex Bolts, (4) 3/8 in. Lock Washers, (4) 3/8 in. Flat Washers, (4) 3/8 in. Square Nuts, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by warranty. 47B-2080 1 on hand More Info/Options for Hard Krome Res-Tec 3 in. Drag Pipe 47B-2080

$612.95 Hard Krome 3 in. Big Straights with Hard-Tips 45-9010B $612.95 Manufacturer: Hard Krome Dennis Kirk Part #: 4402752 Hard Krome 3 in. Big Straights with Hard-Tips : Manufacturer part # 45-9010B - These pipes make a statement that bigger is better. Outside diameter measures 3 in. with a 1 3/4 in. inside diameter on most models. CNC-machined straight-cut Hard-Tips billet end caps included. Includes Boost Port technology. Boost Port is a cross-over system that connects two dual exhaust pipes together. Optional CNC-machined tapered (order 44-8256) or slash-cut (order 44-8253) Hard-Tips provide a custom look. To change sound and performance, optional perforated (order 44-8263) or straight-thru (order 44-8259) baffles can also be used. , , Included Items: , (2) Drag Pipes, (1) Mounting Bracket, (4) 3/8 in.-16 x 3/4 in. Hex Head Bolts, (4) 3/8 in.-16 Square Nuts, (4) 3/8 in. Flat Washers, (4) 3/8 in. Lock Washers NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may nee