|
|
$2089.99
KR Tuned Titanium Full Exhaust System 4401825
Dennis Kirk Part #: 4401825
KR Tuned Titanium Full Exhaust System 4401825: Manufacturer part # 804062399 - Designed by the Kenny Roberts MotoGP race engineers. Extreme-performance exhaust offers maximum flow and the best possible lean angles. Headers are constructed of lightweight stainless steel with TIG welds for durability. Special canister shape is designed to hug your bike to maximize lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 804062399
1 on Hand
More Info/Options for KR Tuned Titanium Full Exhaust System 4401825
|
|
|
|
$2089.99
KR Tuned Carbon Fiber Full Exhaust System 4401826
Dennis Kirk Part #: 4401826
KR Tuned Carbon Fiber Full Exhaust System 4401826: Manufacturer part # 804062300 - Designed by the Kenny Roberts MotoGP race engineers. Extreme-performance exhaust offers maximum flow and the best possible lean angles. Headers are constructed of lightweight stainless steel with TIG welds for durability. Special canister shape is designed to hug your bike to maximize lean angles. Removable, EU homologized insert keeps dBs low and power high. Include patented carbon fiber end cap, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 804062300
1 on Hand
More Info/Options for KR Tuned Carbon Fiber Full Exhaust System 4401826
|
|
|
|
$noprice
S&S 6-Speed Gear Set Cassette 110194
Dennis Kirk Part #: 110194
S&S 6-Speed Gear Set Cassette 110194: Manufacturer part # 561222 - 6-SPEED GEAR SET CASSETTE ONLY. Gear set cassette only. Includes all the gears and the shifting mechanism, assembled in an S&S polished trap door. May be installed in stock and most aftermarket transmission cases with only minor modifications. Stock cases must be clearanced for the additional shifting fork. For 91-06 Evolution and Twin Cam FLT and Softail models, but can also retro fit to 86-90 models with the appropriate late-style clutch and starter adapter. Made in the U.S.A.. NOTE: This item ships in 3-4 days after the order is placed.. 561222
1 on Hand
More Info/Options for S&S 6-Speed Gear Set Cassette 110194
|
|
|
|
$2075.99
H14877 Baker Drivetrain Polished Case w/2.94:1 First Gear Ratio 5-Speed Transmission
Dennis Kirk Part #: H14877
H14877 Baker Drivetrain Polished Case w/2.94:1 First Gear Ratio 5-Speed Transmission: Manufacturer part # 502PG - If you're installing a Baker transmission, then you're installing the best, , Unsurpassed Quality: If you're looking for premium drivetrain products with unsurpassed performance and durability, you've called the right place, , Baker Drivetrains expertise comes from many years of drivetrain design and development experience, and their proud to be the originators of the most innovative drivetrain designs for the American motorcycle aftermarket, , They design and manufacture premium drivetrain products for those who demand only the best, , THEY DON'T COPY - THEY DON'T IMITATE ,. Big time transmissions with roller detent shift systems, billet steel hard chrome-plated shift forks and 6061 T-6 billet aluminum shift doors. Come with a 2.94:1 first gear ratio. Compatible with stock replacements for model years listed in the application chart below. Includes a Manufacturer's Statement of Origin (MSO). Made in the U.S.A.. NOTE:This item ships in 3-4 days after order is placed.. 502PG
1 on Hand
More Info/Options for H14877 Baker Drivetrain Polished Case w/2.94:1 First Gear Ratio 5-Speed Transmission
|
|
|
|
$2042.99
H14878 Baker Drivetrain Black Case w/2.94:1 First Gear Ratio 5-Speed Transmission
Dennis Kirk Part #: H14878
H14878 Baker Drivetrain Black Case w/2.94:1 First Gear Ratio 5-Speed Transmission: Manufacturer part # 502BG - If you're installing a Baker transmission, then you're installing the best, , Unsurpassed Quality: If you're looking for premium drivetrain products with unsurpassed performance and durability, you've called the right place, , Baker Drivetrains expertise comes from many years of drivetrain design and development experience, and their proud to be the originators of the most innovative drivetrain designs for the American motorcycle aftermarket, , They design and manufacture premium drivetrain products for those who demand only the best, , THEY DON'T COPY - THEY DON'T IMITATE ,. Big time transmissions with roller detent shift systems, billet steel hard chrome-plated shift forks and 6061 T-6 billet aluminum shift doors. Come with a 2.94:1 first gear ratio. Compatible with stock replacements for model years listed in the application chart below. Includes a Manufacturer's Statement of Origin (MSO). Made in the U.S.A.. NOTE: This item ships in 3-4 days after order is placed.. 502BG
1 on Hand
More Info/Options for H14878 Baker Drivetrain Black Case w/2.94:1 First Gear Ratio 5-Speed Transmission
|
|
|
|
$2027.99
Trac Dynamics Extended Standard Swingarm 583156
Dennis Kirk Part #: 583156
Trac Dynamics Extended Standard Swingarm 583156: Put that power to the ground with an extended swingarm. Lengthens the wheelbase 10" over stock. Swingarm design features an internal air tank for air shifter supply, S/T axle adjuster that provides almost six inches of wheelbase adjustment, and loop support. Air tank fittings are 1/8" NPT and come with plugs in them. Black finish. Use stock wheels and components. Must install extended rear brake line (sold separately). , , NOTE: Air tank is for use with nitrogen/air shifters. NOT FOR USE WITH NITROUS OXIDE., NOTE: Maximum pressure for air tanks is 160 lb., NOTE: Extended brake lines and 130-link or longer chain required; sold separately. NOTE: This item ships 3-4 business days after order is placed.
1 on Hand
More Info/Options for Trac Dynamics Extended Standard Swingarm 583156
|
|
|
|
$2027.99
Trac Dynamics Extended Standard Swingarm 583154
Dennis Kirk Part #: 583154
Trac Dynamics Extended Standard Swingarm 583154: Put that power to the ground with an extended swingarm. Lengthens the wheelbase 10" over stock. Swingarm design features an internal air tank for air shifter supply, S/T axle adjuster that provides almost six inches of wheelbase adjustment, and loop support. Air tank fittings are 1/8" NPT and come with plugs in them. Black finish. Use stock wheels and components. Must install extended rear brake line (sold separately). , , NOTE: Air tank is for use with nitrogen/air shifters. NOT FOR USE WITH NITROUS OXIDE., NOTE: Maximum pressure for air tanks is 160 lb., NOTE: Extended brake lines and 130-link or longer chain required; sold separately. NOTE: This item ships 3-4 business days after order is placed.
1 on Hand
More Info/Options for Trac Dynamics Extended Standard Swingarm 583154
|
|
|
|
$2003.99
Trac Dynamics Extended 240 Big Wheel Swingarm 583168
Dennis Kirk Part #: 583168
Trac Dynamics Extended 240 Big Wheel Swingarm 583168: Get that "fat tire" look with a Performance Machine 8.5" x 18" rear wheel one of these kits, available in chrome or black powdercoat. Designed with a 6" or 10" extended wheelbase. Kits include 1/4" offset 17-tooth front sprocket; feature the S/T axle adjuster, loop support, internal air tank and axle spacers. 1/8" NPT air tank fittings come with plugs in them. Swingarms for Kawasaki ZX10R and Yamaha R1 include brake caliper, hanger bracket and rotor components needed for bolt-on installation. Installation require the use of an extended rear brake line (sold separately. For correct wheel, see performance machine forged aluminum street wheels, super wide rear. , , NOTE: Air tank is for use with nitrogen/air shifters. NOT FOR USE WITH NITROUS OXIDE., NOTE: Maximum pressure for air tanks is 160 lb., NOTE: Extended brake lines and 130-link or longer chain required; sold separately. NOTE: This item ships 3-4 business days after order is placed.
1 on Hand
More Info/Options for Trac Dynamics Extended 240 Big Wheel Swingarm 583168
|
|
|
|
$2003.99
Trac Dynamics Extended 240 Big Wheel Swingarm 583170
Dennis Kirk Part #: 583170
Trac Dynamics Extended 240 Big Wheel Swingarm 583170: Get that "fat tire" look with a Performance Machine 8.5" x 18" rear wheel one of these kits, available in chrome or black powdercoat. Designed with a 6" or 10" extended wheelbase. Kits include 1/4" offset 17-tooth front sprocket; feature the S/T axle adjuster, loop support, internal air tank and axle spacers. 1/8" NPT air tank fittings come with plugs in them. Swingarms for Kawasaki ZX10R and Yamaha R1 include brake caliper, hanger bracket and rotor components needed for bolt-on installation. Installation require the use of an extended rear brake line (sold separately. For correct wheel, see performance machine forged aluminum street wheels, super wide rear. , , NOTE: Air tank is for use with nitrogen/air shifters. NOT FOR USE WITH NITROUS OXIDE., NOTE: Maximum pressure for air tanks is 160 lb., NOTE: Extended brake lines and 130-link or longer chain required; sold separately. NOTE: This item ships 3-4 business days after order is placed.
1 on Hand
More Info/Options for Trac Dynamics Extended 240 Big Wheel Swingarm 583170
|
|
|
|
$2003.99
Trac Dynamics Extended 240 Big Wheel Swingarm 582878
Dennis Kirk Part #: 582878
Trac Dynamics Extended 240 Big Wheel Swingarm 582878: Manufacturer part # PKT611676B - Get that "fat tire" look with a Performance Machine 8.5" x 18" rear wheel one of these kits, available in chrome or black powdercoat. Designed with a 6" or 10" extended wheelbase. Kits include 1/4" offset 17-tooth front sprocket; feature the S/T axle adjuster, loop support, internal air tank and axle spacers. 1/8" NPT air tank fittings come with plugs in them. Swingarms for Kawasaki ZX10R and Yamaha R1 include brake caliper, hanger bracket and rotor components needed for bolt-on installation. Installation require the use of an extended rear brake line (sold separately. For correct wheel, see performance machine forged aluminum street wheels, super wide rear. , , NOTE: Air tank is for use with nitrogen/air shifters. NOT FOR USE WITH NITROUS OXIDE., NOTE: Maximum pressure for air tanks is 160 lb., NOTE: Extended brake lines and 130-link or longer chain required; sold separately. NOTE: This item ships 3-4 business days after order is placed. PKT611676B
1 on Hand
More Info/Options for Trac Dynamics Extended 240 Big Wheel Swingarm 582878
|
|
|
|
$2003.99
Trac Dynamics Extended 240 Big Wheel Swingarm 582877
Dennis Kirk Part #: 582877
Trac Dynamics Extended 240 Big Wheel Swingarm 582877: Manufacturer part # PKT511666B - Get that "fat tire" look with a Performance Machine 8.5" x 18" rear wheel one of these kits, available in chrome or black powdercoat. Designed with a 6" or 10" extended wheelbase. Kits include 1/4" offset 17-tooth front sprocket; feature the S/T axle adjuster, loop support, internal air tank and axle spacers. 1/8" NPT air tank fittings come with plugs in them. Swingarms for Kawasaki ZX10R and Yamaha R1 include brake caliper, hanger bracket and rotor components needed for bolt-on installation. Installation require the use of an extended rear brake line (sold separately. For correct wheel, see performance machine forged aluminum street wheels, super wide rear. , , NOTE: Air tank is for use with nitrogen/air shifters. NOT FOR USE WITH NITROUS OXIDE., NOTE: Maximum pressure for air tanks is 160 lb., NOTE: Extended brake lines and 130-link or longer chain required; sold separately. NOTE: This item ships 3-4 business days after order is placed. PKT511666B
1 on Hand
More Info/Options for Trac Dynamics Extended 240 Big Wheel Swingarm 582877
|
|
|
|
$2003.99
Trac Dynamics Extended 240 Big Wheel Swingarm 582876
Dennis Kirk Part #: 582876
Trac Dynamics Extended 240 Big Wheel Swingarm 582876: Manufacturer part # PKT511446B - Get that "fat tire" look with a Performance Machine 8.5" x 18" rear wheel one of these kits, available in chrome or black powdercoat. Designed with a 6" or 10" extended wheelbase. Kits include 1/4" offset 17-tooth front sprocket; feature the S/T axle adjuster, loop support, internal air tank and axle spacers. 1/8" NPT air tank fittings come with plugs in them. Swingarms for Kawasaki ZX10R and Yamaha R1 include brake caliper, hanger bracket and rotor components needed for bolt-on installation. Installation require the use of an extended rear brake line (sold separately. For correct wheel, see performance machine forged aluminum street wheels, super wide rear. , , NOTE: Air tank is for use with nitrogen/air shifters. NOT FOR USE WITH NITROUS OXIDE., NOTE: Maximum pressure for air tanks is 160 lb., NOTE: Extended brake lines and 130-link or longer chain required; sold separately. NOTE: This item ships 3-4 business days after order is placed. PKT511446B
1 on Hand
More Info/Options for Trac Dynamics Extended 240 Big Wheel Swingarm 582876
|
|
|
|
CLOSEOUT!
Was: $3295.99
Now: $1648.00
H14731 Baker Drivetrain Wrinkle-Black case w/3.24 first and .80 sixth 6-Speed Transmission
Dennis Kirk Part #: H14731
H14731 Baker Drivetrain Wrinkle-Black case w/3.24 first and .80 sixth 6-Speed Transmission: Manufacturer part # 873BG - If you're installing a Baker transmission, then you're installing the best, , Unsurpassed Quality: If you're looking for premium drivetrain products with unsurpassed performance and durability, you've called the right place, , Baker Drivetrains expertise comes from many years of drivetrain design and development experience, and their proud to be the originators of the most innovative drivetrain designs for the American motorcycle aftermarket, , They design and manufacture premium drivetrain products for those who demand only the best, , THEY DON'T COPY - THEY DON'T IMITATE ,. A roller detent shift drum with reduced inertia and gear dog teeth with lead-in ramping gives you smoother shifting than stock. Chrome and polished Softail transmissions feature billet cases while all other transmissions use stock-style cases. Shafts and gears manufactured by Andrews to exact Baker specifications. Includes a Manufacturer's Statement of Origin (MSO). Made in the U.S.A.. NOTE: Exhaust bracket may require modification when using these kits. NOTE: All transmissions will require the use of a late-style front pulley. This item ships in 3-4 days after the order is placed.. 873BG
2 on Hand
More Info/Options for H14731 Baker Drivetrain Wrinkle-Black case w/3.24 first and .80 sixth 6-Speed Transmission
|
|
|
|
CLOSEOUT!
Was: $3295.99
Now: $1648.00
H14727 Baker Drivetrain Wrinkle-Black case w/2.94 first and .86 sixth 6-Speed Transmission
Dennis Kirk Part #: H14727
H14727 Baker Drivetrain Wrinkle-Black case w/2.94 first and .86 sixth 6-Speed Transmission: Manufacturer part # 803BG - If you're installing a Baker transmission, then you're installing the best, , Unsurpassed Quality: If you're looking for premium drivetrain products with unsurpassed performance and durability, you've called the right place, , Baker Drivetrains expertise comes from many years of drivetrain design and development experience, and their proud to be the originators of the most innovative drivetrain designs for the American motorcycle aftermarket, , They design and manufacture premium drivetrain products for those who demand only the best, , THEY DON'T COPY - THEY DON'T IMITATE ,. A roller detent shift drum with reduced inertia and gear dog teeth with lead-in ramping gives you smoother shifting than stock. Chrome and polished Softail transmissions feature billet cases while all other transmissions use stock-style cases. Shafts and gears manufactured by Andrews to exact Baker specifications. Includes a Manufacturer's Statement of Origin (MSO). Made in the U.S.A.. NOTE: Exhaust bracket may require modification when using these kits. NOTE: All transmissions will require the use of a late-style front pulley. This item ships in 3-4 days after the order is placed.. 803BG
1 on Hand
More Info/Options for H14727 Baker Drivetrain Wrinkle-Black case w/2.94 first and .86 sixth 6-Speed Transmission
|
|
|
|
CLOSEOUT!
Was: $3295.99
Now: $1648.00
H14872 Baker Drivetrain Wrinkle-Black case w/3.24 first and .87 sixth 6-Speed Transmission for Twin Cam
Dennis Kirk Part #: H14872
H14872 Baker Drivetrain Wrinkle-Black case w/3.24 first and .87 sixth 6-Speed Transmission for Twin Cam: Manufacturer part # 913BG - If you're installing a Baker transmission, then you're installing the best, , Unsurpassed Quality: If you're looking for premium drivetrain products with unsurpassed performance and durability, you've called the right place, , Baker Drivetrains expertise comes from many years of drivetrain design and development experience, and their proud to be the originators of the most innovative drivetrain designs for the American motorcycle aftermarket, , They design and manufacture premium drivetrain products for those who demand only the best, , THEY DON'T COPY - THEY DON'T IMITATE Features a unique roller detent shift drum with reduced inertia and gear dog teeth with lead-in ramping for significantly improved shifting over stock. Come with M.S.O.. Made in the U.S.A.. NOTE: You may need to modify the exhaust bracket when installing these transmissions. NOTE: This item ships in 3-4 days after order is placed.. 913BG
1 on Hand
More Info/Options for H14872 Baker Drivetrain Wrinkle-Black case w/3.24 first and .87 sixth 6-Speed Transmission for Twin Cam
|
|
|
|
CLOSEOUT!
Was: $3295.99
Now: $1648.00
H14710 Baker Drivetrain Wrinkle-Black case w/3.24 first and .80 sixth 6-Speed Transmission
Dennis Kirk Part #: H14710
H14710 Baker Drivetrain Wrinkle-Black case w/3.24 first and .80 sixth 6-Speed Transmission: Manufacturer part # 773BG - If you're installing a Baker transmission, then you're installing the best, , Unsurpassed Quality: If you're looking for premium drivetrain products with unsurpassed performance and durability, you've called the right place, , Baker Drivetrains expertise comes from many years of drivetrain design and development experience, and their proud to be the originators of the most innovative drivetrain designs for the American motorcycle aftermarket, , They design and manufacture premium drivetrain products for those who demand only the best, , THEY DON'T COPY - THEY DON'T IMITATE ,. A roller detent shift drum with reduced inertia and gear dog teeth with lead-in ramping gives you smoother shifting than stock. Chrome and polished Softail transmissions feature billet cases while all other transmissions use stock-style cases. Shafts and gears manufactured by Andrews to exact Baker specifications. Includes a Manufacturer's Statement of Origin (MSO). Made in the U.S.A.. NOTE: Exhaust bracket may require modification when using these kits. NOTE: All transmissions will require the use of a late-style front pulley. This item ships in 3-4 days after the order is placed.. 773BG
1 on Hand
More Info/Options for H14710 Baker Drivetrain Wrinkle-Black case w/3.24 first and .80 sixth 6-Speed Transmission
|
|
|
|
CLOSEOUT!
Was: $3295.99
Now: $2000.00
H14840 Baker Drivetrain Wrinkle-Black case w/2.94 first and .87 sixth 6-Speed Transmission for Twin Cam
Dennis Kirk Part #: H14840
H14840 Baker Drivetrain Wrinkle-Black case w/2.94 first and .87 sixth 6-Speed Transmission for Twin Cam: Manufacturer part # 003BG - If you're installing a Baker transmission, then you're installing the best, , Unsurpassed Quality: If you're looking for premium drivetrain products with unsurpassed performance and durability, you've called the right place, , Baker Drivetrains expertise comes from many years of drivetrain design and development experience, and their proud to be the originators of the most innovative drivetrain designs for the American motorcycle aftermarket, , They design and manufacture premium drivetrain products for those who demand only the best, , THEY DON'T COPY - THEY DON'T IMITATE Features a unique roller detent shift drum with reduced inertia and gear dog teeth with lead-in ramping for significantly improved shifting over stock. Come with M.S.O.. Made in the U.S.A.. NOTE: You may need to modify the exhaust bracket when installing these transmissions. NOTE: This item ships in 3-4 days after order is placed.. 003BG
1 on Hand
More Info/Options for H14840 Baker Drivetrain Wrinkle-Black case w/2.94 first and .87 sixth 6-Speed Transmission for Twin Cam
|
|
|
|
CLOSEOUT!
Was: $3295.99
Now: $1648.00
H14728 Baker Drivetrain Wrinkle-Black case w/3.24 first and .86 sixth 6-Speed Transmission
Dennis Kirk Part #: H14728
H14728 Baker Drivetrain Wrinkle-Black case w/3.24 first and .86 sixth 6-Speed Transmission: Manufacturer part # 813BG - If you're installing a Baker transmission, then you're installing the best, , Unsurpassed Quality: If you're looking for premium drivetrain products with unsurpassed performance and durability, you've called the right place, , Baker Drivetrains expertise comes from many years of drivetrain design and development experience, and their proud to be the originators of the most innovative drivetrain designs for the American motorcycle aftermarket, , They design and manufacture premium drivetrain products for those who demand only the best, , THEY DON'T COPY - THEY DON'T IMITATE ,. A roller detent shift drum with reduced inertia and gear dog teeth with lead-in ramping gives you smoother shifting than stock. Chrome and polished Softail transmissions feature billet cases while all other transmissions use stock-style cases. Shafts and gears manufactured by Andrews to exact Baker specifications. Includes a Manufacturer's Statement of Origin (MSO). Made in the U.S.A.. NOTE: Exhaust bracket may require modification when using these kits. NOTE: All transmissions will require the use of a late-style front pulley. This item ships in 3-4 days after the order is placed.. 813BG
1 on Hand
More Info/Options for H14728 Baker Drivetrain Wrinkle-Black case w/3.24 first and .86 sixth 6-Speed Transmission
|
|
|
|
$1995.99
H14876 Baker Drivetrain Black Case w/2.94:1 First Gear Ratio 5-Speed Transmission
Dennis Kirk Part #: H14876
H14876 Baker Drivetrain Black Case w/2.94:1 First Gear Ratio 5-Speed Transmission: Manufacturer part # 501BG - If you're installing a Baker transmission, then you're installing the best, , Unsurpassed Quality: If you're looking for premium drivetrain products with unsurpassed performance and durability, you've called the right place, , Baker Drivetrains expertise comes from many years of drivetrain design and development experience, and their proud to be the originators of the most innovative drivetrain designs for the American motorcycle aftermarket, , They design and manufacture premium drivetrain products for those who demand only the best, , THEY DON'T COPY - THEY DON'T IMITATE ,. Big time transmissions with roller detent shift systems, billet steel hard chrome-plated shift forks and 6061 T-6 billet aluminum shift doors. Come with a 2.94:1 first gear ratio. Compatible with stock replacements for model years listed in the application chart below. Includes a Manufacturer's Statement of Origin (MSO). Made in the U.S.A.. NOTE: This item ships in 3-4 days after order is placed.. 501BG
1 on Hand
More Info/Options for H14876 Baker Drivetrain Black Case w/2.94:1 First Gear Ratio 5-Speed Transmission
|
|
|
|
$1995.99
Kuryakyn Wild Things Forged Cylinder Heads 149465
Dennis Kirk Part #: 149465
Kuryakyn Wild Things Forged Cylinder Heads 149465: Manufacturer part # 428 - Kuryakyn is proud to offer forged versions of our cutting-edge billet cylinder heads. Efficient, bathtub combustion chambers. Set to take cams of up to .640" lift. Proprietary valves designed on the flow bench to match Wild Things ports. Hard valve seats for use with lead-free fuel. Intake ports: 3/8" raised high flow and high velocity with 1.980" stainless intake valves. Exhaust ports: constant-radius "D" high flow and high velocity with 1.630" stainless steel exhaust valves. High-performance valve springs and titanium top retainers. Balances awesome horsepower and torque with the qualities of a good street motor. Starts as easy as a stock bike, runs on pump gas without any detonation, runs cooler than stock and is as tractable as a stock bike. Come completely assembled and ready to install; require the purchase of four long OEM headbolts for installation (sold separately). Utilizes equal-length head bolts to minimize cylinder distortion and promote consistent head gasket squish. Extra cooling fin area. Larger, improved breather passages (requires crankca | |
