TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Pirelli Machinced Mudwiser Tire, AMS Wheel Kit MUDWISER 552903

$158.99 Maier Side Panels 19019 617812 $158.99 Manufacturer: Maier Dennis Kirk Part #: 617812 Maier Side Panels: Manufacturer part # 19019 - DennisKirk Part # 617812 - Maier bodywork is made of tough, vacuum-formed, high-density polyethylene. Designed for a perfect fit and uses stock hardware or provided hardware. Drilling is required. Colors are OEM color matched.. 19019 2 on hand More Info/Options for Maier Side Panels 19019 617812

$158.99 Pirelli Machined Mudwiser Tire/AMS Wheel Kit MUDWISER 553806 $158.99 Manufacturer: Pirelli Dennis Kirk Part #: 553806 Pirelli Machined Mudwiser Tire/AMS Wheel Kit: Manufacturer part # MUDWISER - DennisKirk Part # 553806 - Pirelli Mudwiser tires mounted on AMS machined or black cast aluminum wheels. 6 ply-rated Mudwiser tires combine an aggressive tread with a lightweight carcass for performance in the mud and on the trail. Wheels are 12x7. Centercaps and lug nuts sold separately. , , NOTE: Use stock lug nuts. , , Dimensions:. , Inflated Width/Measuring Rim Width: Not specified. , Inflated Diameter: Not specified. , Acceptable Rim Width(s): Not specified. , Deepest Treads Depth: 1". , Balance Dot: No. , Directional Arrow: Yes. , Speed Rating: None. , , Capacities and Construction:. , Load Capacity: Not specified. , Maximum Inflation Pressure to Seat Bead: 35 PSI. , Maximum Operation Pressure: 7 PSI. , Bias or Radial Ply: Bias. , Tread Plies/Material: 6 nylon. , Sidewall Plies/Material: 6 nylon. , DOT Approved for Road Use: No. , Tube or Tubeless: Tubeless. , Wheel Recommendation: Bead lock wheel. MUDWISER 1 on hand More Info/Options for Pirelli Machined Mudwiser Tire/AMS Wheel Kit MUDWISER 553806

$158.99 Pirelli Machinced Mudwiser Tire/AMS Wheel Kit MUDWISER 553807 $158.99 Manufacturer: Pirelli Dennis Kirk Part #: 553807 Pirelli Machinced Mudwiser Tire/AMS Wheel Kit: Manufacturer part # MUDWISER - DennisKirk Part # 553807 - Pirelli Mudwiser tires mounted on AMS machined or black cast aluminum wheels. 6 ply-rated Mudwiser tires combine an aggressive tread with a lightweight carcass for performance in the mud and on the trail. Wheels are 12x7. Centercaps and lug nuts sold separately. , , NOTE: Use stock lug nuts. , , Dimensions:. , Inflated Width/Measuring Rim Width: Not specified. , Inflated Diameter: Not specified. , Acceptable Rim Width(s): Not specified. , Deepest Treads Depth: 1". , Balance Dot: No. , Directional Arrow: Yes. , Speed Rating: None. , , Capacities and Construction:. , Load Capacity: Not specified. , Maximum Inflation Pressure to Seat Bead: 35 PSI. , Maximum Operation Pressure: 7 PSI. , Bias or Radial Ply: Bias. , Tread Plies/Material: 6 nylon. , Sidewall Plies/Material: 6 nylon. , DOT Approved for Road Use: No. , Tube or Tubeless: Tubeless. , Wheel Recommendation: Bead lock wheel. MUDWISER 1 on hand More Info/Options for Pirelli Machinced Mudwiser Tire/AMS Wheel Kit MUDWISER 553807

$158.99 Mustang Vintage Style Solo Seat 76157 $158.99 Manufacturer: Mustang Dennis Kirk Part #: 454934 Mustang Vintage Style Solo Seat: Manufacturer part # 76157 - Raise some hell with this solo seat. No studs or conchos will get in the way for a clean, vintage look. A steel base with support wings supports the full width of the foam bucket. A matching pillion pad is available separately: Part No. 45-4306 (8 in.wide). Made in the U.S.A., , Dimensions: , Overall Length: 21 in., Drivers Seat: , Length: 15-1/4 in., Width: 13 in., Backrest Height: 3 in... 76157 2 on hand More Info/Options for Mustang Vintage Style Solo Seat 76157

$158.99 ITP Polished Holeshot GNCC T-9 Pro-Series Tire/Wheel Kits 37437 $158.99 Manufacturer: ITP Dennis Kirk Part #: 553032 ITP Polished Holeshot GNCC T-9 Pro-Series Tire/Wheel Kits: Manufacturer part # 37437 - Kit features a Holeshot GNCC tire mounted on a T-9 Pro Series wheel. The ultimate tire for the most difficult GNCC-style courses; designed to reduce lap time. Rounded profile front tire tracks straighter with less steering effort. Open-tread, split-knob rear tire offers exceptional traction and balanced cornering. 6-ply rating. , , NOTE: To order for an entire machine, please order separate right and left front kits and separate right and left rear kits, NOTE: Whenever changing to oversize tires on a four-wheel drive ATV, you must install all four wheels and tires as listed for your machine, NOTE: Center caps are not available. 37437 4 on hand More Info/Options for ITP Polished Holeshot GNCC T-9 Pro-Series Tire/Wheel Kits 37437

CLEARANCE! Was: $211.99 Now: $158.99 HJC AC-12 Helmet 528-622 $158.99 Manufacturer: HJC Dennis Kirk Part #: 3301423S HJC AC-12 Helmet: Manufacturer part # 528-622 - Snell M2005 and DOT certified. Advanced composite material shell is constructed using advanced fiberglass and Spectra composite weave. Two-piece channeled dual-density EPS liner. Large eye port opening for greater visibility. Flow-through advanced-channeling ventilation system has dual flow-through channels, two multi-stage forehead intake vents, rear venturi exhaust spoiler and two lower exhaust vents. Anti-Fog system features side chin bar-mounted vortex vents that create a low-pressure vacuum effect, drawing heat and moisture out of face shield area. Adjustable chin vent redirects air upward and across shield interior. Removable AquaTrans open-cell liner quickly wicks moisture away from the skin and improves air flow. Streamline, wrap-around neck roll reduces wind noise. Two-stage pivot mechanism that compresses the shield into the eye port gasket, providing an extremely secure seal. Improved no-tool shield removal/installation. Scratch-resistant hard-coated shield mounts flush to helmet for reduced turbulence. Shield is rated at 95% UV resistant. Built-in communication system speaker cavity. Medium helmet weighs 3lbs., 9oz.. Padded D-ring retention strap. 528-622 More than 10 on hand More Info/Options for HJC AC-12 Helmet 528-622

$158.99 Pro X Piston Assembly - 94.94mm Bore 7150A $158.99 Manufacturer: Pro X Dennis Kirk Part #: 130017S Pro X Piston Assembly - 94.94mm Bore: Manufacturer part # 7150A - The smart alternative to costly engine repairs. Cast from a high-silicone content aluminum alloy that meets or exceeds OEM specifications, then CNC-machined to extremely close tolerances. OEM replacements. Available in standard and oversizes. Pro X rings are exact OEM replacements and can be interchange with stock part. B, C, D and E extend the life of expensive plated cylinders. Pistons supplied in a kit includes rings, wrist pins, and circlips. NOTE: This is a fractional oversize piston of .0004 inch. It is intended for slightly worn cylinders, please be sure this is what you need before ordering. The following is the meaning of the letters next to Dennis Kirk Part Number: S is Standard. SB is +.0004 in.. SC is +.0008 in.. SD is +.0012 in.. SE is +.0016 in... 7150A 1 on hand More Info/Options for Pro X Piston Assembly - 94.94mm Bore 7150A

CLEARANCE! Was: $211.99 Now: $158.99 HJC AC-12 Helmet 528-623 $158.99 Manufacturer: HJC Dennis Kirk Part #: 3301423M HJC AC-12 Helmet: Manufacturer part # 528-623 - Snell M2005 and DOT certified. Advanced composite material shell is constructed using advanced fiberglass and Spectra composite weave. Two-piece channeled dual-density EPS liner. Large eye port opening for greater visibility. Flow-through advanced-channeling ventilation system has dual flow-through channels, two multi-stage forehead intake vents, rear venturi exhaust spoiler and two lower exhaust vents. Anti-Fog system features side chin bar-mounted vortex vents that create a low-pressure vacuum effect, drawing heat and moisture out of face shield area. Adjustable chin vent redirects air upward and across shield interior. Removable AquaTrans open-cell liner quickly wicks moisture away from the skin and improves air flow. Streamline, wrap-around neck roll reduces wind noise. Two-stage pivot mechanism that compresses the shield into the eye port gasket, providing an extremely secure seal. Improved no-tool shield removal/installation. Scratch-resistant hard-coated shield mounts flush to helmet for reduced turbulence. Shield is rated at 95% UV resistant. Built-in communication system speaker cavity. Medium helmet weighs 3lbs., 9oz.. Padded D-ring retention strap. 528-623 More than 10 on hand More Info/Options for HJC AC-12 Helmet 528-623

$158.99 Carbon Tech SS Carbon Fiber Reed Set 338SS $158.99 Manufacturer: Carbon Tech Dennis Kirk Part #: 183156 Carbon Tech SS Carbon Fiber Reed Set: Manufacturer part # 338SS - Boost your machines performance and power. . SS for Superstock and ported motors. Because Carbon Tech reeds are made from the best aerospace materials, you wont have to change reeds after every race. Average reed life is at least one racing season. Will not harm engine. Ideal for recreational and racing use.. 338SS 1 on hand More Info/Options for Carbon Tech SS Carbon Fiber Reed Set 338SS

$158.99 Erlandson Performance Drive Clutch Rebuild Kit CX400001 $158.99 Manufacturer: Erlandson Performance Dennis Kirk Part #: 380888 Erlandson Performance Drive Clutch Rebuild Kit: Manufacturer part # CX400001 - Kits include enough parts to rebuild your Polaris P85 or P90 drive (primary) clutch. The P85 clutch comes on most Polaris snowmobiles except: Indy Lite (all), Indy Sport (all) and Super Sport (92-96). , KIT INCLUDES: , 1. Cover bushing and retainer, 2. Moveable bushing and retainer, 3. Three rollers and roller pins, 4. Six roller washers, 5. Six buttons, 6. Ten button shims, 7. Three weight pins and nuts. CX400001 6 on hand More Info/Options for Erlandson Performance Drive Clutch Rebuild Kit CX400001

$158.99 Pirelli Machinced Mudwiser Tire/AMS Wheel Kit MUDWISER 553770 $158.99 Manufacturer: Pirelli Dennis Kirk Part #: 553770 Pirelli Machinced Mudwiser Tire/AMS Wheel Kit: Manufacturer part # MUDWISER - DennisKirk Part # 553770 - Pirelli Mudwiser tires mounted on AMS machined or black cast aluminum wheels. 6 ply-rated Mudwiser tires combine an aggressive tread with a lightweight carcass for performance in the mud and on the trail. Wheels are 12x7. Centercaps and lug nuts sold separately. , NOTE: , Lug nut use part number 552016 (chrome or 552806 (black), Center cap use part number 552051 (chrome) or 552810 (black). MUDWISER 1 on hand More Info/Options for Pirelli Machinced Mudwiser Tire/AMS Wheel Kit MUDWISER 553770

$158.99 Mustang Vintage Style Solo Seat 76159 $158.99 Manufacturer: Mustang Dennis Kirk Part #: 454935 Mustang Vintage Style Solo Seat: Manufacturer part # 76159 - Raise some hell with this solo seat. No studs or conchos will get in the way for a clean, vintage look. A steel base with support wings supports the full width of the foam bucket. A matching pillion pad is available separately: Part No. 45-4306 (8 in.wide). Made in the U.S.A., , Dimensions: , Overall Length: 20 in., Drivers Seat: , Length: 13-3/4 in., Width: 12-1/2 in., Backrest Height: 3 in... 76159 2 on hand More Info/Options for Mustang Vintage Style Solo Seat 76159

$158.99 Mustang Wide Studded Rear Seat 79117 $158.99 Manufacturer: Mustang Dennis Kirk Part #: 455157 Mustang Wide Studded Rear Seat: Manufacturer part # 79117 - Pillion pad for wide style solo seat with removable backrest - Part no. 45-5155. 14 in. wide.. 79117 1 on hand More Info/Options for Mustang Wide Studded Rear Seat 79117

$158.99 Mustang Wide Studded Rear Seat 79486 $158.99 Manufacturer: Mustang Dennis Kirk Part #: 455539 Mustang Wide Studded Rear Seat: Manufacturer part # 79486 - Rear seat features a recess in the front of seat to accommodate the driver backrest. Made in the U.S.A., , NOTE: Fits seat Part No. 455538. 79486 1 on hand More Info/Options for Mustang Wide Studded Rear Seat 79486

CLEARANCE! Was: $211.99 Now: $158.99 HJC AC-12 Helmet 528-624 $158.99 Manufacturer: HJC Dennis Kirk Part #: 3301423L HJC AC-12 Helmet: Manufacturer part # 528-624 - Snell M2005 and DOT certified. Advanced composite material shell is constructed using advanced fiberglass and Spectra composite weave. Two-piece channeled dual-density EPS liner. Large eye port opening for greater visibility. Flow-through advanced-channeling ventilation system has dual flow-through channels, two multi-stage forehead intake vents, rear venturi exhaust spoiler and two lower exhaust vents. Anti-Fog system features side chin bar-mounted vortex vents that create a low-pressure vacuum effect, drawing heat and moisture out of face shield area. Adjustable chin vent redirects air upward and across shield interior. Removable AquaTrans open-cell liner quickly wicks moisture away from the skin and improves air flow. Streamline, wrap-around neck roll reduces wind noise. Two-stage pivot mechanism that compresses the shield into the eye port gasket, providing an extremely secure seal. Improved no-tool shield removal/installation. Scratch-resistant hard-coated shield mounts flush to helmet for reduced turbulence. Shield is rated at 95% UV resistant. Built-in communication system speaker cavity. Medium helmet weighs 3lbs., 9oz.. Padded D-ring retention strap. 528-624 More than 10 on hand More Info/Options for HJC AC-12 Helmet 528-624

$158.99 Mustang Vintage Style Solo Seat 75205 $158.99 Manufacturer: Mustang Dennis Kirk Part #: 455171 Mustang Vintage Style Solo Seat: Manufacturer part # 75205 - Raise some hell with this solo seat. No studs or conchos will get in the way for a clean, vintage look. A steel base with support wings supports the full width of the foam bucket. A matching pillion pad is available separately: Part No. 45-5177 (9 in.wide). Made in the U.S.A., , Dimensions: , Overall Length: 19 in., Drivers Seat: , Length: 13 in., Width: 15 in., Backrest Height: 3-1/2 in... 75205 1 on hand More Info/Options for Mustang Vintage Style Solo Seat 75205

$158.99 Pirelli Machined Mudwiser Tire/AMS Wheel Kit MUDWISER 552904 $158.99 Manufacturer: Pirelli Dennis Kirk Part #: 552904 Pirelli Machined Mudwiser Tire/AMS Wheel Kit: Manufacturer part # MUDWISER - DennisKirk Part # 552904 - Pirelli Mudwiser tires mounted on AMS machined or black cast aluminum wheels. 6 ply-rated Mudwiser tires combine an aggressive tread with a lightweight carcass for performance in the mud and on the trail. Wheels are 12x7. Centercaps and lug nuts sold separately. , , NOTE: , Lug nut use part number 552016 (chrome or 552806 (black), Center cap use part number 552051 (chrome) or 552810 (black). , , Dimensions:. , Inflated Width/Measuring Rim Width: Not specified. , Inflated Diameter: Not specified. , Acceptable Rim Width(s): Not specified. , Deepest Treads Depth: 1". , Balance Dot: No. , Directional Arrow: Yes. , Speed Rating: None. , , Capacities and Construction:. , Load Capacity: Not specified. , Maximum Inflation Pressure to Seat Bead: 35 PSI. , Maximum Operation Pressure: 7 PSI. , Bias or Radial Ply: Bias. , Tread Plies/Material: 6 nylon. , Sidewall Plies/Material: 6 nylon. , DOT Approved for Road Use: No. , Tube or Tubeless: Tubeless. , Wheel Recommendation: Bead lock wheel. MUDWISER 3 on hand More Info/Options for Pirelli Machined Mudwiser Tire/AMS Wheel Kit MUDWISER 552904

$158.99 Pirelli Machinced Mudwiser T