|
|
CLEARANCE!
Was: $149.95
Now: $134.96
32 in. Fox Racing Airline Pants
Dennis Kirk Part #: 356777032
32 in. Fox Racing Airline Pants: Manufacturer part # 04013 - Ergonomic, pre-curved race construction for optimal fit in the Rider Attack Position (RAP). Big-bore mesh main body construction offers max airflow. Air Intake System transfers cooling breezes through knees and thighs. Extended heat- and abrasion-resistant leather inner knee panels ensure durability and coverage. Quad-Stretch front gusset adds mobility. Quad-Stretch rear yoke moves vertically and horizontally so pants ride perfectly.. 04013
1 on Hand
More Info/Options for 32 in. Fox Racing Airline Pants
|
|
|
|
CLEARANCE!
Was: $149.95
Now: $134.96
34 in. Fox Racing Airline Pants
Dennis Kirk Part #: 356627634
34 in. Fox Racing Airline Pants: Manufacturer part # 04013 - Nylon/polyester main construction. Heat- and abrasion-resistant leather inner knee panels. Articulated precurved legs and hip area. Active stretch knee panel. Quad stretch rear yoke offers incredible maneuverability. Soft flexible rubber logo near back yoke is sewn on top of spacer mesh for improved ventilation. Buckle closure at center front waist. 3/4 length inner mesh lining. Detachable hip pads. Cuffless lower leg.. 04013
4 on Hand
More Info/Options for 34 in. Fox Racing Airline Pants
|
|
|
|
|
|
CLEARANCE!
Was: $79.95
Now: $134.96
34 in. Shift Recon Pants
Dennis Kirk Part #: 356799634
34 in. Shift Recon Pants: Manufacturer part # 04046 - Heavy-Duty 600D polyester construction provides excellent durability. Adjustable hook and loop waist straps for a personalized fit. Zip off lower legs convert pants into long-length shorts. Ballistic inner knee panels for heat and abrasion resistance.. 04046
2 on Hand
More Info/Options for 34 in. Shift Recon Pants
|
|
|
|
CLEARANCE!
Was: $149.95
Now: $134.96
28 in. Shift Faction Pants
Dennis Kirk Part #: 356799028
28 in. Shift Faction Pants: Manufacturer part # 04045 - X-Stretch 4-way stretch panel in the crotch for unrestricted mobility. Accordion knee panels for increased performance and flexibility. Full-grain leather inner knee panels for maximum heat and abrasion resistance. Natural cuff for an unrestricted fit.. 04045
2 on Hand
More Info/Options for 28 in. Shift Faction Pants
|
|
|
|
$134.95
Moose Full Chassis Skid Plate 514583
Dennis Kirk Part #: 514583
Moose Full Chassis Skid Plate 514583: Manufacturer part # 691 - Made of tough 3/16" aluminum alloy plate. Full-body skid plates protect frame, engine cases and undercarriage. High-impact areas made from 1/4? extruded aluminum. Feature a clear anodized finish and an integrated, long-wearing chain guide. Custom fit for each model. , , NOTE: This is a three piece set. 691
2 on Hand
More Info/Options for Moose Full Chassis Skid Plate 514583
|
|
|
|
|
|
$134.95
One Industries Graphics/Seat Cover Kit 454880
Dennis Kirk Part #: 454880
One Industries Graphics/Seat Cover Kit 454880: Manufacturer part # GSF-KW460 - Kits include radiator shrouds, tank decals (if applicable), swingarm and One Industries logo front fender side decals (not tip decal). Made of 15mm vinyl with 3M adhesive backing. Technoflex seat covers are "3D" molded rubber design and match graphics for great pro look. , , NOTE: For proper adhesion, use only soap and water to wash surface where decal/sticker is to be applied.. GSF-KW460
1 on Hand
More Info/Options for One Industries Graphics/Seat Cover Kit 454880
|
|
|
|
|
|
$134.95
Drag Specialties 1 1/2 in. Big Buffalo Risers 595556
Dennis Kirk Part #: 595556
Drag Specialties 1 1/2 in. Big Buffalo Risers 595556: Machined from billet aluminum then given a brilliant show-chrome finish. Risers for Honda applications (except VTX/VLX600 models) are threaded for 7/16"-14 bolts. Risers for Kawasaki models are threaded for 10mm x 1.5 bolts; may also be used on Victory 04 models. Risers for Yamaha models are threaded for 12mm x 1.25 bolts; may also be used on Honda VTX models and Victory 05-07 models. Solid riser top clamp available separately. Use with Drag Specialties 1 1/2" Big Buffalo bars or other handlebars with a 1 1/2" clamping area. Made in the U.S.A...
1 on Hand
More Info/Options for Drag Specialties 1 1/2 in. Big Buffalo Risers 595556
|
|
|
|
$134.95
Black/Metallic Black/Light Adjusting WileyX Ink Sunglasses
Dennis Kirk Part #: 326023
Black/Metallic Black/Light Adjusting WileyX Ink Sunglasses: Manufacturer part # 746 - Ink frame seals your eyes from the elements with removable Facial Cavity seal. Virtually unbreakable frame comes with a semi-hard case. Wide temple bars provide ultimate peripheral coverage. Smoke lens for bright/glare conditions (comes with a glossy black frame), Light-Adjusting lens, which darkens in bright light conditions (comes with a metallic black frame), or Polarized Silver Flash mirrored lens for UV protection and unmatched clarity on bright days (comes with a matte black frame).. 746
6 on Hand
More Info/Options for Black/Metallic Black/Light Adjusting WileyX Ink Sunglasses
|
|
|
|
|
|
$134.95
Drag Specialties Drag Specialties Battery Charger 282448
Dennis Kirk Part #: 282448
Drag Specialties Drag Specialties Battery Charger 282448: Manufacturer part # BATTERY CHARGER/ - Safely charge and monitor maintenance-free AGM batteries two-four times faster than other battery chargers. Bi-level DC output when used with 3A fused ring terminals provides safe operation. Three-wire ring terminals protect battery when 5A rate is used. Completely automatic charging maintains any battery at safe levels. Spark-proof and reverse polarity protected. Proper charging is assured at any temperature.. BATTERY CHARGER/
10+ on hand
More Info/Options for Drag Specialties Drag Specialties Battery Charger 282448
|
|
|
|
$134.95
One Industries Graphics/Seat Cover Kit 454883
Dennis Kirk Part #: 454883
One Industries Graphics/Seat Cover Kit 454883: Manufacturer part # GSF-SU460 - Kits include radiator shrouds, tank decals (if applicable), swingarm and One Industries logo front fender side decals (not tip decal). Made of 15mm vinyl with 3M adhesive backing. Technoflex seat covers are "3D" molded rubber design and match graphics for great pro look. , , NOTE: For proper adhesion, use only soap and water to wash surface where decal/sticker is to be applied.. GSF-SU460
2 on Hand
More Info/Options for One Industries Graphics/Seat Cover Kit 454883
|
|
|
|
|
|
$134.95
Moose Full Chassis Skid Plate 493391
Dennis Kirk Part #: 493391
Moose Full Chassis Skid Plate 493391: Manufacturer part # 698 - Made of tough 3/16" aluminum alloy plate. Full-body skid plates protect frame, engine cases and undercarriage. High-impact areas made from 1/4? extruded aluminum. Feature a clear anodized finish and an integrated, long-wearing chain guide. Custom fit for each model. , , NOTE: This is a three piece set. 698
1 on Hand
More Info/Options for Moose Full Chassis Skid Plate 493391
|
|
|
|
$134.95
Light Adjusting WileyX JP-2 Sunglasses
Dennis Kirk Part #: 326017
Light Adjusting WileyX JP-2 Sunglasses: Manufacturer part # 510 - JP-2 frame seals your eyes from the elements with removable Facial Cavity seal and controls desired air-flow with sunglasses strap. Virtually unbreakable frame is glossy black and comes with a semi-hard case. Blue Ice mirrored lens reduces glare in bright conditions, Light-Adjusting lens darkens in bright light conditions and Polarized Copper lens curbs glare and enhances color contrast.. 510
4 on Hand
More Info/Options for Light Adjusting WileyX JP-2 Sunglasses
|
|
|
|
$134.95
One Industries Graphics/Seat Cover Kit 454884
Dennis Kirk Part #: 454884
One Industries Graphics/Seat Cover Kit 454884: Manufacturer part # GSF-YA449 - Kits include radiator shrouds, tank decals (if applicable), swingarm and One Industries logo front fender side decals (not tip decal). Made of 15mm vinyl with 3M adhesive backing. Technoflex seat covers are "3D" molded rubber design and match graphics for great pro look. , , NOTE: For proper adhesion, use only soap and water to wash surface where decal/sticker is to be applied.. GSF-YA449
1 on Hand
More Info/Options for One Industries Graphics/Seat Cover Kit 454884
|
|
|
|
$134.95
One Industries Graphics/Seat Cover Kit 454878
Dennis Kirk Part #: 454878
One Industries Graphics/Seat Cover Kit 454878: Manufacturer part # GSF-KT460 - Kits include radiator shrouds, tank decals (if applicable), swingarm and One Industries logo front fender side decals (not tip decal). Made of 15mm vinyl with 3M adhesive backing. Technoflex seat covers are "3D" molded rubber design and match graphics for great pro look. , , NOTE: For proper adhesion, use only soap and water to wash surface where decal/sticker is to be applied.. GSF-KT460
1 on Hand
More Info/Options for One Industries Graphics/Seat Cover Kit 454878
|
|
|
|
$134.95
Gloss Black/Light Adjusting WileyX Top Jimmie Sunglasses
Dennis Kirk Part #: 326020
Gloss Black/Light Adjusting WileyX Top Jimmie Sunglasses: Manufacturer part # 626 - Top Jimmie frame seals your eyes from the elements with removable Facial Cavity seal and controls desired air-flow with sunglasses strap. Virtually unbreakable frame is glossy black and comes with a semi-hard case. Sunburst mirrored lens for high-glare conditions, Light-Adjusting lens, which darkens in bright light conditions, or Polarized Smoke lens for UV protection and unmatched clarity (comes with a matte black frame).. 626
5 on Hand
More Info/Options for Gloss Black/Light Adjusting WileyX Top Jimmie Sunglasses
|
|
|
|
$134.95
One Industries Graphics/Seat Cover Kit 454881
Dennis Kirk Part #: 454881
One Industries Graphics/Seat Cover Kit 454881: Manufacturer part # GSF-SU260 - Kits include radiator shrouds, tank decals (if applicable), swingarm and One Industries logo front fender side decals (not tip decal). Made of 15mm vinyl with 3M adhesive backing. Technoflex seat covers are "3D" molded rubber design and match graphics for great pro look. , , NOTE: For proper adhesion, use only soap and water to wash surface where decal/sticker is to be applied.. GSF-SU260
2 on Hand
More Info/Options for One Industries Graphics/Seat Cover Kit 454881
|
|
|
|
$134.95
Moose Universal Manual Hand Lift Kit 514356
Dennis Kirk Part #: 514356
Moose Universal Manual Hand Lift Kit 514356: Universal manual hand lift kit works with extended push tubes only and it is sold separately; not necessary with an electric lift, winch mount or E-Z lift kit. NOTE: This will only work with the extended push tubes WHAT TO ORDER WITH THIS ITEM: Plow Blade: Choose one of 42 in., 50 in. 55 in., 60 in., or 72 in. Standard Blade; or a 50 in. or 60 in. Country Blade. Extended Bottom Mount: To be searched by make, model, and year Extended Lift Push Tube: To be searched by make, model, and year. If you be will using a Track System on an ATV order Part No. 516089 , , INCLUDED ITEMS:. , (1) Lower handle, (1) Upper handle, (1) Rear crank, (1) Front crank, (1) Push rod, (1) Front crank clamp, (2) Front crank clamp plate, (1) Push rod clevis, (1) Handle clevis, (1) 5/16 in. x 1 in. socket head bolt, (2) 5/16 in. x 1 1/2 in. hex head bolt, (1) 5/16 in. x 1 in. hex head bolt, (6) 5/16 in. x 2 1/4 in. hex head bolt, (1) 1/2 in. x 1 3/4 in. shoulder bolt, (1) 3/8 in. x 5/8 in. shoulder bolt, (2) Snap on axle cap, (2) 1 in. x 3/4 in. ID flanged bushings, (1 1 x 36 utility strap, (1)1 in. black grip, (1) 12 in. chain with 5/16 in. snap hook, (5) 5/16 in. flanged nut, (7) 5/16 in. nylock nut, (1) 3/8 in. nylock nut, (1) 1/2 in. jam nut, (8) 5/16 in. flat washer, (1) 3/4 in. flat washer, (1) 3/8 in. flat washer, (2) 3/8 in. x 1 in. hex bolts, (2) 3/8 in. flanged nuts, (1) Spacer, (1) Instruction sheet.
8 on Hand
More Info/Options for Moose Universal Manual Hand Lift Kit 514356
|
|
|
|
|
|
$134.95
Drag Specialties 1 1/2 in. Big Buffalo Risers 595557
Dennis Kirk Part #: 595557
Drag Specialties 1 1/2 in. Big Buffalo Risers 595557: Machined from billet aluminum then given a brilliant show-chrome finish. Risers for Honda applications (except VTX/VLX600 models) are threaded for 7/16"-14 bolts. Risers for Kawasaki models are threaded for 10mm x 1.5 bolts; may also be used on Victory 04 models. Risers for Yamaha models are threaded for 12mm x 1.25 bolts; may also be used on Honda VTX models and Victory 05-07 models. Solid riser top clamp available separately. Use with Drag Specialties 1 1/2" Big Buffalo bars or other handlebars with a 1 1/2" clamping area. Made in the U.S.A...
| |
