|
|
$15.99
Comet Cam Arm/A-18 380528
Dennis Kirk Part #: 380528
Comet Cam Arm/A-18 380528: Manufacturer part # 215400A1 - Dennis Kirk stocks a large selection of Comet cam arms for all 100, 101, 102, 108-C, 108-EXP and 108 4-PRO clutches. Refer to the Comet tuning manual to help select the proper profile. To determine the proper cam arm weight for a 108 4-PRO clutch (four cam arms), use the following formula: Weight of recommended 108-EXP cam arm (from Applications) x .855 = recommended cam arm weight for 108 4-PRO. The weight listed is their objective per arm but may vary up to .75 grams due to the variation in material density resulting from the manufacturing process. All cam arms are sold each and include the bushing (installed). Bushings are easily removable for clutches that require it. NOTE: 102-C, 108-C and 108-EXP clutches all use the same basic cam arm. However, the 1993 108-EXP clutch does not use cam arm bushings. You need only to push the bushings out of any of the current cam arms, which all include them. 1994-present 108-EXP and 108 4-PRO clutches use cam arms with bushings like the 102-C and 108-C. 215400A1
6 on Hand
More Info/Options for Comet Cam Arm/A-18 380528
|
|
|
|
$18.99
Comet Cam Arm/A-10 380459
Dennis Kirk Part #: 380459
Comet Cam Arm/A-10 380459: Manufacturer part # 213371A1 - Dennis Kirk stocks a large selection of Comet cam arms for all 100, 101, 102, 108-C, 108-EXP and 108 4-PRO clutches. Refer to the Comet tuning manual to help select the proper profile. To determine the proper cam arm weight for a 108 4-PRO clutch (four cam arms), use the following formula: Weight of recommended 108-EXP cam arm (from Applications) x .855 = recommended cam arm weight for 108 4-PRO. The weight listed is their objective per arm but may vary up to .75 grams due to the variation in material density resulting from the manufacturing process. All cam arms are sold each and include the bushing (installed). Bushings are easily removable for clutches that require it. NOTE: 102-C, 108-C and 108-EXP clutches all use the same basic cam arm. However, the 1993 108-EXP clutch does not use cam arm bushings. You need only to push the bushings out of any of the current cam arms, which all include them. 1994-present 108-EXP and 108 4-PRO clutches use cam arms with bushings like the 102-C and 108-C. 213371A1
4 on Hand
More Info/Options for Comet Cam Arm/A-10 380459
|
|
|
|
|
|
$17.99
Comet Cam Arm/A-22 380468
Dennis Kirk Part #: 380468
Comet Cam Arm/A-22 380468: Manufacturer part # 215867A1 - Dennis Kirk stocks a large selection of Comet cam arms for all 100, 101, 102, 108-C, 108-EXP and 108 4-PRO clutches. Refer to the Comet tuning manual to help select the proper profile. To determine the proper cam arm weight for a 108 4-PRO clutch (four cam arms), use the following formula: Weight of recommended 108-EXP cam arm (from Applications) x .855 = recommended cam arm weight for 108 4-PRO. The weight listed is their objective per arm but may vary up to .75 grams due to the variation in material density resulting from the manufacturing process. All cam arms are sold each and include the bushing (installed). Bushings are easily removable for clutches that require it. NOTE: 102-C, 108-C and 108-EXP clutches all use the same basic cam arm. However, the 1993 108-EXP clutch does not use cam arm bushings. You need only to push the bushings out of any of the current cam arms, which all include them. 1994-present 108-EXP and 108 4-PRO clutches use cam arms with bushings like the 102-C and 108-C. 215867A1
3 on Hand
More Info/Options for Comet Cam Arm/A-22 380468
|
|
|
|
$20.99
Comet Clutch Spring 38329
Dennis Kirk Part #: 38329
Comet Clutch Spring 38329: Manufacturer part # 202552A - Genuine Comet springs are available for 102-C, 108-C, 108-EXP, 108 4-PRO and older 100/101-C clutches. Order for new uncalibrated models, for replacement of worn springs in older clutches or for recalibration. Refer to the Tuning Manual to help make your selection. , Number of coils - 5 1/2. Tension at 1 1/8 - 187, Tension at 2 3/8 - 118.. 202552A
1 on Hand
More Info/Options for Comet Clutch Spring 38329
|
|
|
|
$25.99
Comet Clutch Retaining Bolt Kit 380358
Dennis Kirk Part #: 380358
Comet Clutch Retaining Bolt Kit 380358: Manufacturer part # 215784A - Clutch retaining bolt kit - 1/2 in.-20 x 7 1/4 in. bolt used on clutch numbers 380140, 380147, 380150, 380329 and 380332. Includes clutch bolt and 1/2 in. lock washer. Pictured as items 1 and 2. , We have genuine Comet replacement and modification parts to keep your 102-C/108-C/108-EXP/108 4-PRO or older model clutch in peak performing condition. Always refer to the Comet Shop Manual or Tuning Handbook before replacing any part of your clutch. NOTE: Be sure to identify your clutch correctly before ordering replacement parts. To be consistent with Comet, our applications will refer to this year's (2005-2006) clutch production as 2005, and last season's as 2004, ect.. 215784A
1 on Hand
More Info/Options for Comet Clutch Retaining Bolt Kit 380358
|
|
|
|
$50.99
Comet Roller Kit 3859
Dennis Kirk Part #: 3859
Comet Roller Kit 3859: Manufacturer part # 204360A - Includes three pins 3/8 in. diameter x 63/64 in. long, six steel washers, six 9/16 in. D contoured guide buttons and three 3/8 in. i.d. rollers with bushing inserts. Pictured as items 9-12. ,. We have genuine Comet replacement and modification parts to keep your 102-C/108-C/108-EXP/108 4-PRO or older model clutch in peak performing condition. Always refer to the Comet Shop Manual or Tuning Handbook before replacing any part of your clutch. NOTE: Be sure to identify your clutch correctly before ordering replacement parts. To be consistent with Comet, our applications will refer to this year's (2005-2006) clutch production as 2005, and last season's as 2004, ect.. 204360A
1 on Hand
More Info/Options for Comet Roller Kit 3859
|
|
|
|
$14.99
Comet Cam Arm/R-1 380649
Dennis Kirk Part #: 380649
Comet Cam Arm/R-1 380649: Manufacturer part # 207674A1 - Dennis Kirk stocks a large selection of Comet cam arms for all 100, 101, 102, 108-C, 108-EXP and 108 4-PRO clutches. Refer to the Comet tuning manual to help select the proper profile. To determine the proper cam arm weight for a 108 4-PRO clutch (four cam arms), use the following formula: Weight of recommended 108-EXP cam arm (from Applications) x .855 = recommended cam arm weight for 108 4-PRO. The weight listed is their objective per arm but may vary up to .75 grams due to the variation in material density resulting from the manufacturing process. All cam arms are sold each and include the bushing (installed). Bushings are easily removable for clutches that require it. NOTE: 102-C, 108-C and 108-EXP clutches all use the same basic cam arm. However, the 1993 108-EXP clutch does not use cam arm bushings. You need only to push the bushings out of any of the current cam arms, which all include them. 1994-present 108-EXP and 108 4-PRO clutches use cam arms with bushings like the 102-C and 108-C. 207674A1
3 on Hand
More Info/Options for Comet Cam Arm/R-1 380649
|
|
|
|
$15.99
Comet Cam Arm/A-52 380804
Dennis Kirk Part #: 380804
Comet Cam Arm/A-52 380804: Manufacturer part # 214897A1 - Dennis Kirk stocks a large selection of Comet cam arms for all 100, 101, 102, 108-C, 108-EXP and 108 4-PRO clutches. Refer to the Comet tuning manual to help select the proper profile. To determine the proper cam arm weight for a 108 4-PRO clutch (four cam arms), use the following formula: Weight of recommended 108-EXP cam arm (from Applications) x .855 = recommended cam arm weight for 108 4-PRO. The weight listed is their objective per arm but may vary up to .75 grams due to the variation in material density resulting from the manufacturing process. All cam arms are sold each and include the bushing (installed). Bushings are easily removable for clutches that require it. NOTE: 102-C, 108-C and 108-EXP clutches all use the same basic cam arm. However, the 1993 108-EXP clutch does not use cam arm bushings. You need only to push the bushings out of any of the current cam arms, which all include them. 1994-present 108-EXP and 108 4-PRO clutches use cam arms with bushings like the 102-C and 108-C. 214897A1
6 on Hand
More Info/Options for Comet Cam Arm/A-52 380804
|
|
|
|
$31.99
Comet Clutch Retaining Bolt Kit 380498
Dennis Kirk Part #: 380498
Comet Clutch Retaining Bolt Kit 380498: Manufacturer part # 217119A - Clutch retaining bolt kit - 7/16 in.-20 x 5 1/2 in.-12 point fits clutch numbers 380487 and 380637. Pictured as items 1 and 2. ,. We have genuine Comet replacement and modification parts to keep your 102-C/108-C/108-EXP/108 4-PRO or older model clutch in peak performing condition. Always refer to the Comet Shop Manual or Tuning Handbook before replacing any part of your clutch. NOTE: Be sure to identify your clutch correctly before ordering replacement parts. To be consistent with Comet, our applications will refer to this year's (2005-2006) clutch production as 2005, and last season's as 2004, ect.. 217119A
1 on Hand
More Info/Options for Comet Clutch Retaining Bolt Kit 380498
|
|
|
|
$227.99
Comet 94-C Duster Calibrated Clutch with 6 Pucks 3834
Dennis Kirk Part #: 3834
Comet 94-C Duster Calibrated Clutch with 6 Pucks 3834: Manufacturer part # 206096A - No cams, fingers or rollers to wear out. 7 1/4 in. diameter sheaves. Silky smooth operation is ideal for kids and trail riding. Easily recalibrated by simply changing pucks and spring. Very little maintenance required. Includes cover puller tool, mounting bolt, installation instructions and tuning guide. Ready to bolt on and run for most applications (puck adjustments or changes and spring change may be required on some models). , Polaris with "long" crankshafts 72-84/3100. Replacement DK and Comet puck numbers 38-45/205918. Positive depth indicates the taper starts the specified distance into the casting.. 206096A
1 on Hand
More Info/Options for Comet 94-C Duster Calibrated Clutch with 6 Pucks 3834
|
|
|
|
$227.99
Comet 94-C Duster Calibrated Clutch with 9 Pucks 3848
Dennis Kirk Part #: 3848
Comet 94-C Duster Calibrated Clutch with 9 Pucks 3848: Manufacturer part # 209942A - No cams, fingers or rollers to wear out. 7 1/4 in. diameter sheaves. Silky smooth operation is ideal for kids and trail riding. Easily recalibrated by simply changing pucks and spring. Very little maintenance required. Includes cover puller tool, mounting bolt, installation instructions and tuning guide. Ready to bolt on and run for most applications (puck adjustments or changes and spring change may be required on some models). , For Ski-Doo and Moto-Ski fan cooled manual and electric-start twins 76-90/engagement rpm not available. For replacement pucks use part #38-43. Flush bore depth indicates the taper begins exactly at the inner edge of the fixed face casting.. 209942A
1 on Hand
More Info/Options for Comet 94-C Duster Calibrated Clutch with 9 Pucks 3848
|
|
|
|
$13.99
Comet Cam Arm/K-1 380652
Dennis Kirk Part #: 380652
Comet Cam Arm/K-1 380652: Manufacturer part # 209011A1 - Dennis Kirk stocks a large selection of Comet cam arms for all 100, 101, 102, 108-C, 108-EXP and 108 4-PRO clutches. Refer to the Comet tuning manual to help select the proper profile. To determine the proper cam arm weight for a 108 4-PRO clutch (four cam arms), use the following formula: Weight of recommended 108-EXP cam arm (from Applications) x .855 = recommended cam arm weight for 108 4-PRO. The weight listed is their objective per arm but may vary up to .75 grams due to the variation in material density resulting from the manufacturing process. All cam arms are sold each and include the bushing (installed). Bushings are easily removable for clutches that require it. NOTE: 102-C, 108-C and 108-EXP clutches all use the same basic cam arm. However, the 1993 108-EXP clutch does not use cam arm bushings. You need only to push the bushings out of any of the current cam arms, which all include them. 1994-present 108-EXP and 108 4-PRO clutches use cam arms with bushings like the 102-C and 108-C. 209011A1
6 on Hand
More Info/Options for Comet Cam Arm/K-1 380652
|
|
|
|
|
|
$15.99
Comet Clutch Spring 38241
Dennis Kirk Part #: 38241
Comet Clutch Spring 38241: Manufacturer part # 209696A - Genuine Comet springs are available for 102-C, 108-C, 108-EXP, 108 4-PRO and older 100/101-C clutches. Order for new uncalibrated models, for replacement of worn springs in older clutches or for recalibration. Refer to the Tuning Manual to help make your selection. , Number of coils - 5 1/2. Tension at 1 1/8 - 203, Tension at 2 3/8 - 85.. 209696A
1 on Hand
More Info/Options for Comet Clutch Spring 38241
|
|
|
|
|
|
$15.99
Comet Cam Arm/A-54 380464
Dennis Kirk Part #: 380464
Comet Cam Arm/A-54 380464: Manufacturer part # 214651A1 - Dennis Kirk stocks a large selection of Comet cam arms for all 100, 101, 102, 108-C, 108-EXP and 108 4-PRO clutches. Refer to the Comet tuning manual to help select the proper profile. To determine the proper cam arm weight for a 108 4-PRO clutch (four cam arms), use the following formula: Weight of recommended 108-EXP cam arm (from Applications) x .855 = recommended cam arm weight for 108 4-PRO. The weight listed is their objective per arm but may vary up to .75 grams due to the variation in material density resulting from the manufacturing process. All cam arms are sold each and include the bushing (installed). Bushings are easily removable for clutches that require it. NOTE: 102-C, 108-C and 108-EXP clutches all use the same basic cam arm. However, the 1993 108-EXP clutch does not use cam arm bushings. You need only to push the bushings out of any of the current cam arms, which all include them. 1994-present 108-EXP and 108 4-PRO clutches use cam arms with bushings like the 102-C and 108-C, , NOTE: This cam arm is for Standard Elevation on the Polaris Indy 650 RXL 1990-1995 and 1997 models, for High Altitude use Part No. 380453. 214651A1
9 on Hand
More Info/Options for Comet Cam Arm/A-54 380464
|
|
|
|
$15.99
Comet Cam Arm/D 380659
Dennis Kirk Part #: 380659
Comet Cam Arm/D 380659: Manufacturer part # 203088A1 - Dennis Kirk stocks a large selection of Comet cam arms for all 100, 101, 102, 108-C, 108-EXP and 108 4-PRO clutches. Refer to the Comet tuning manual to help select the proper profile. To determine the proper cam arm weight for a 108 4-PRO clutch (four cam arms), use the following formula: Weight of recommended 108-EXP cam arm (from Applications) x .855 = recommended cam arm weight for 108 4-PRO. The weight listed is their objective per arm but may vary up to .75 grams due to the variation in material density resulting from the manufacturing process. All cam arms are sold each and include the bushing (installed). Bushings are easily removable for clutches that require it. NOTE: 102-C, 108-C and 108-EXP clutches all use the same basic cam arm. However, the 1993 108-EXP clutch does not use cam arm bushings. You need only to push the bushings out of any of the current cam arms, which all include them. 1994-present 108-EXP and 108 4-PRO clutches use cam arms with bushings like the 102-C and 108-C. 203088A1
3 on Hand
More Info/Options for Comet Cam Arm/D 380659
|
|
|
|
$15.99
Comet Cam Arm/AC 380466
Dennis Kirk Part #: 380466
Comet Cam Arm/AC 380466: Manufacturer part # 215218A1 - Dennis Kirk stocks a large selection of Comet cam arms for all 100, 101, 102, 108-C, 108-EXP and 108 4-PRO clutches. Refer to the Comet tuning manual to help select the proper profile. To determine the proper cam arm weight for a 108 4-PRO clutch (four cam arms), use the following formula: Weight of recommended 108-EXP cam arm (from Applications) x .855 = recommended cam arm weight for 108 4-PRO. The weight listed is their objective per arm but may vary up to .75 grams due to the variation in material density resulting from the manufacturing process. All cam arms are sold each and include the bushing (installed). Bushings are easily removable for clutches that require it. NOTE: 102-C, 108-C and 108-EXP clutches all use the same basic cam arm. However, the 1993 108-EXP clutch does not use cam arm bushings. You need only to push the bushings out of any of the current cam arms, which all include them. 1994-present 108-EXP and 108 4-PRO clutches use cam arms with bushings like the 102-C and 108-C. 215218A1
2 on Hand
More Info/Options for Comet Cam Arm/AC 380466
|
|
|
|
$37.99
Team Standard Top Gear 11004622
Dennis Kirk Part #: 11004622
Team Standard Top Gear 11004622: Manufacturer part # 351519005 - 13-plate wide standard top gear is lightweight with superior strength. 22 tooth sprocket, 15 splines. Manufactured at TEAM's ISO 9902 certified facility using the latest technology. Made with case-hardened, heat-treated machine steel. High-quality construction means gears have proper fitment and maximum efficiency.. 351519005
2 on Hand
More Info/Options for Team Standard Top Gear 11004622
|
|
|
|
|
|
$255.99
Clutch/Clutch Component - Secondary Team TSS-98 Lightweight Rapid Reaction Secondary Clutch
Dennis Kirk Part #: 382673
Clutch/Clutch Component - Secondary Team TSS-98 Lightweight Rapid Reaction Secondary Clutch: Manufacturer part # 420313LW - New design -- one pound lighter than standard design. Twin enclosed rollers. Twin Trax helix for smooth upshifts and backshifts. Tunable with helix angles and springs. Optimized rib design improves cooling with less wind drag. Increased efficiency. Improved length-to-diameter ratio on bushings. New helix design requires only four fasteners. Lightweight clutches and helixes are NOT interchangable with standard clutch or helix. For complete clutch kit, you must order a Lightweight Clutch, Lightweigh Helix (sold separately), Secondary Spring (sold separately), and Primary Spring (sold separately). . Note for Arctic Cat Mountain Cat 800/900 02-04 Applications: For Powder setup order Lightweight Helix part no. 38-2747, Secondary Spring part no. 38-2716 and Primary Spring part no. 38-2698 Note for Polaris XC 600 SP/Pro X 600 00-05 Applications: For Aggressive setup order Lightweight Helix part no. 38-2753, Secondary Spring part no. 38-2715, Primary Spring part no. 38-2721 and Clutch Weight part nos. 38-2666 Note for Polaris XC 700 SP/Pro X 700 00-05 Applications: For Stock setup order Lightweight Helix part no. 38-2757, Secondary Spring part no. 38-2718, Primary Spring part no. 38-2699 and Clutch Weight part nos. 38-2668 Note for Polaris XC 700 SP/Pro X 700 00-05 Applications: For Aggressive setup order Lightweight Helix part no. 38-2753, Secondary Spring part no. 38-2718, Primary Spring part no. 38-2721 and Clutch Weight part nos. 38-2668 Note for Polaris XC 800 SP 02-05 Applications: For Aggressive setup order Lightweight Helix part no. 38-2755, Secondary Spring part no. 38-2718, Primary Spring part no. 38-2720 and Clutch Weight part nos. 38-2670 Note for Polaris XC 800 SP 02-05 Applications: For Stock setup order Lightweight Helix part no. 38-2759, Secondary Spring part no. 38-2718, Primary Spring part no. 38-2699 and Clutch Weight part nos. 38-2670 NOTE for Polaris Indy 600 RMK (all) 2000-05, Indy 700 RMK (all) 1999-05 and Vertical Escapde (all) 2003-05 application: Powder set up and recommeded for altitudes of 6,000 to 9,000 ft. NOTE: Arctic Cat models require tool kit Part No. 28-2426 for installation.. 420313LW
3 on Hand
More Info/Options for Clutch/Clutch Component - Secondary Team TSS-98 Lightweight Rapid Reaction Secondary Clutch
|
|
|
|
