|
|
$29.95
Moose Fork Seal Kit 149616
Dennis Kirk Part #: 149616
Moose Fork Seal Kit 149616: Manufacturer part # 56119 - Quality seals that stand up to the toughest conditions and last ten times longer than OEM seals. 30% less friction than other seals. Smooth stroke due to triple sealing lips. Include fork seals and dust wipers.. 56119
2 on Hand
More Info/Options for Moose Fork Seal Kit 149616
|
|
|
|
$29.95
Moose Fork Seal Kit 149622
Dennis Kirk Part #: 149622
Moose Fork Seal Kit 149622: Manufacturer part # 56130 - Quality seals that stand up to the toughest conditions and last ten times longer than OEM seals. 30% less friction than other seals. Smooth stroke due to triple sealing lips. Include fork seals and dust wipers.. 56130
4 on Hand
More Info/Options for Moose Fork Seal Kit 149622
|
|
|
|
$27.95
Fork Skin/Pair Moose Fork Skins
Dennis Kirk Part #: 588375
Fork Skin/Pair Moose Fork Skins: Manufacturer part # 4060012 - For 32mm to 43mm forks. 356mm long. Fits bikes 85cc and smaller. Helps protect vulnerable fork tube and seal from dust, dirt and corrosive elements. Designed to fit closely over upper and lower fork tubes. Constructed of a double lined 3mm thick neoprene. Assembled using double stitched seams. Two free grip donuts include. Sold in pairs.. 4060012
10+ on hand
More Info/Options for Fork Skin/Pair Moose Fork Skins
|
|
|
|
$34.95
Red Moose Pressure Relief Valve Kit
Dennis Kirk Part #: 282555
Red Moose Pressure Relief Valve Kit: Manufacturer part # TGT20042 - For use with Showa/Kayaba upside down forks. Release built up fork air pressure with the push of a button. Keep your forks working at peak performance after each ride without using any tools. Precision-machined aluminum valve body. Anodized cap is designed to keep dirt, mud, and water out; O-ring creates a positive seal to prevent contaminants from entering fork. Measures 10.5mm high when installed. Installation tool included.. TGT20042
5 on Hand
More Info/Options for Red Moose Pressure Relief Valve Kit
|
|
|
|
$34.95
Stealth Moose Pressure Relief Valve Kit
Dennis Kirk Part #: 282556
Stealth Moose Pressure Relief Valve Kit: Manufacturer part # TGT20043 - For use with Showa/Kayaba upside down forks. Release built up fork air pressure with the push of a button. Keep your forks working at peak performance after each ride without using any tools. Precision-machined aluminum valve body. Anodized cap is designed to keep dirt, mud, and water out; O-ring creates a positive seal to prevent contaminants from entering fork. Measures 10.5mm high when installed. Installation tool included.. TGT20043
3 on Hand
More Info/Options for Stealth Moose Pressure Relief Valve Kit
|
|
|
|
|
|
$265.99
Braking Rotor-Front 193999
Dennis Kirk Part #: 193999
Braking Rotor-Front 193999: Manufacturer part # STX20D - Unlock your bikes braking potential. Made from high-carbon content stainless steel. New materials and an innovative manufacturing process result in superior braking performance, greater longevity and less weight than cast iron or other stainless steel rotors. Used by top racers around the world. Rotors are sold each; you must order two discs for dual-disc front applications. Innovative design uses entire brake pad surface evenly while eliminating the need to drill holes for weight reduction, which results in a lighter, stronger and more efficient rotor. Able to withstand heat cycles without warping, which provides maximum stopping power while remaining perfectly flat.. STX20D
1 on Hand
More Info/Options for Braking Rotor-Front 193999
|
|
|
|
$303.99
Braking Rotor-Front 1901113
Dennis Kirk Part #: 1901113
Braking Rotor-Front 1901113: Unlock your bikes braking potential. Made from high-carbon content stainless steel. New materials and an innovative manufacturing process result in superior braking performance, greater longevity and less weight than cast iron or other stainless steel rotors. Used by top racers around the world. Rotors are sold each; you must order two discs for dual-disc front applications. Innovative design uses entire brake pad surface evenly while eliminating the need to drill holes for weight reduction, which results in a lighter, stronger and more efficient rotor. Able to withstand heat cycles without warping, which provides maximum stopping power while remaining perfectly flat..
1 on Hand
More Info/Options for Braking Rotor-Front 1901113
|
|
|
|
$303.99
Braking Rotor-Front 1901111
Dennis Kirk Part #: 1901111
Braking Rotor-Front 1901111: Unlock your bikes braking potential. Made from high-carbon content stainless steel. New materials and an innovative manufacturing process result in superior braking performance, greater longevity and less weight than cast iron or other stainless steel rotors. Used by top racers around the world. Rotors are sold each; you must order two discs for dual-disc front applications. Innovative design uses entire brake pad surface evenly while eliminating the need to drill holes for weight reduction, which results in a lighter, stronger and more efficient rotor. Able to withstand heat cycles without warping, which provides maximum stopping power while remaining perfectly flat..
1 on Hand
More Info/Options for Braking Rotor-Front 1901111
|
|
|
|
$265.99
Braking Rotor-Front 194446
Dennis Kirk Part #: 194446
Braking Rotor-Front 194446: Manufacturer part # STX36D - Unlock your bikes braking potential. Made from high-carbon content stainless steel. New materials and an innovative manufacturing process result in superior braking performance, greater longevity and less weight than cast iron or other stainless steel rotors. Used by top racers around the world. Rotors are sold each; you must order two discs for dual-disc front applications. Innovative design uses entire brake pad surface evenly while eliminating the need to drill holes for weight reduction, which results in a lighter, stronger and more efficient rotor. Able to withstand heat cycles without warping, which provides maximum stopping power while remaining perfectly flat.. STX36D
2 on Hand
More Info/Options for Braking Rotor-Front 194446
|
|
|
|
$265.99
Braking Rotor-Front 199549
Dennis Kirk Part #: 199549
Braking Rotor-Front 199549: Manufacturer part # STX76D - Unlock your bikes braking potential. Made from high-carbon content stainless steel. New materials and an innovative manufacturing process result in superior braking performance, greater longevity and less weight than cast iron or other stainless steel rotors. Used by top racers around the world. Rotors are sold each; you must order two discs for dual-disc front applications. Innovative design uses entire brake pad surface evenly while eliminating the need to drill holes for weight reduction, which results in a lighter, stronger and more efficient rotor. Able to withstand heat cycles without warping, which provides maximum stopping power while remaining perfectly flat.. STX76D
1 on Hand
More Info/Options for Braking Rotor-Front 199549
|
|
|
|
$265.99
Braking Rotor-Front 194654
Dennis Kirk Part #: 194654
Braking Rotor-Front 194654: Manufacturer part # STX62D - Unlock your bikes braking potential. Made from high-carbon content stainless steel. New materials and an innovative manufacturing process result in superior braking performance, greater longevity and less weight than cast iron or other stainless steel rotors. Used by top racers around the world. Rotors are sold each; you must order two discs for dual-disc front applications. Innovative design uses entire brake pad surface evenly while eliminating the need to drill holes for weight reduction, which results in a lighter, stronger and more efficient rotor. Able to withstand heat cycles without warping, which provides maximum stopping power while remaining perfectly flat.. STX62D
2 on Hand
More Info/Options for Braking Rotor-Front 194654
|
|
|
|
$303.99
Braking Rotor-Front 1901118
Dennis Kirk Part #: 1901118
Braking Rotor-Front 1901118: Unlock your bikes braking potential. Made from high-carbon content stainless steel. New materials and an innovative manufacturing process result in superior braking performance, greater longevity and less weight than cast iron or other stainless steel rotors. Used by top racers around the world. Rotors are sold each; you must order two discs for dual-disc front applications. Innovative design uses entire brake pad surface evenly while eliminating the need to drill holes for weight reduction, which results in a lighter, stronger and more efficient rotor. Able to withstand heat cycles without warping, which provides maximum stopping power while remaining perfectly flat..
1 on Hand
More Info/Options for Braking Rotor-Front 1901118
|
|
|
|
$265.99
Braking Rotor-Front 193997
Dennis Kirk Part #: 193997
Braking Rotor-Front 193997: Manufacturer part # STX08D - Unlock your bikes braking potential. Made from high-carbon content stainless steel. New materials and an innovative manufacturing process result in superior braking performance, greater longevity and less weight than cast iron or other stainless steel rotors. Used by top racers around the world. Rotors are sold each; you must order two discs for dual-disc front applications. Innovative design uses entire brake pad surface evenly while eliminating the need to drill holes for weight reduction, which results in a lighter, stronger and more efficient rotor. Able to withstand heat cycles without warping, which provides maximum stopping power while remaining perfectly flat.. STX08D
3 on Hand
More Info/Options for Braking Rotor-Front 193997
|
|
|
|
$265.99
Braking Rotor-Front 197055
Dennis Kirk Part #: 197055
Braking Rotor-Front 197055: Manufacturer part # STX69D - Unlock your bikes braking potential. Made from high-carbon content stainless steel. New materials and an innovative manufacturing process result in superior braking performance, greater longevity and less weight than cast iron or other stainless steel rotors. Used by top racers around the world. Rotors are sold each; you must order two discs for dual-disc front applications. Innovative design uses entire brake pad surface evenly while eliminating the need to drill holes for weight reduction, which results in a lighter, stronger and more efficient rotor. Able to withstand heat cycles without warping, which provides maximum stopping power while remaining perfectly flat.. STX69D
1 on Hand
More Info/Options for Braking Rotor-Front 197055
|
|
|
|
$304.99
Braking Rotor-Front 196594
Dennis Kirk Part #: 196594
Braking Rotor-Front 196594: Manufacturer part # BU01FLD - Unlock your bikes braking potential. Made from high-carbon content stainless steel. New materials and an innovative manufacturing process result in superior braking performance, greater longevity and less weight than cast iron or other stainless steel rotors. Used by top racers around the world. Rotors are sold each; you must order two discs for dual-disc front applications. Innovative design uses entire brake pad surface evenly while eliminating the need to drill holes for weight reduction, which results in a lighter, stronger and more efficient rotor. Able to withstand heat cycles without warping, which provides maximum stopping power while remaining perfectly flat.. BU01FLD
2 on Hand
More Info/Options for Braking Rotor-Front 196594
|
|
|
|
$265.99
Braking Rotor-Front 194448
Dennis Kirk Part #: 194448
Braking Rotor-Front 194448: Manufacturer part # STX41D - Unlock your bikes braking potential. Made from high-carbon content stainless steel. New materials and an innovative manufacturing process result in superior braking performance, greater longevity and less weight than cast iron or other stainless steel rotors. Used by top racers around the world. Rotors are sold each; you must order two discs for dual-disc front applications. Innovative design uses entire brake pad surface evenly while eliminating the need to drill holes for weight reduction, which results in a lighter, stronger and more efficient rotor. Able to withstand heat cycles without warping, which provides maximum stopping power while remaining perfectly flat.. STX41D
1 on Hand
More Info/Options for Braking Rotor-Front 194448
|
|
|
|
$265.99
Braking Rotor-Front 194652
Dennis Kirk Part #: 194652
Braking Rotor-Front 194652: Manufacturer part # STX38D - Unlock your bikes braking potential. Made from high-carbon content stainless steel. New materials and an innovative manufacturing process result in superior braking performance, greater longevity and less weight than cast iron or other stainless steel rotors. Used by top racers around the world. Rotors are sold each; you must order two discs for dual-disc front applications. Innovative design uses entire brake pad surface evenly while eliminating the need to drill holes for weight reduction, which results in a lighter, stronger and more efficient rotor. Able to withstand heat cycles without warping, which provides maximum stopping power while remaining perfectly flat.. STX38D
Expected Soon
More Info/Options for Braking Rotor-Front 194652
|
|
|
|
$265.99
Braking Rotor-Front 194648
Dennis Kirk Part #: 194648
Braking Rotor-Front 194648: Manufacturer part # STX10D - Unlock your bikes braking potential. Made from high-carbon content stainless steel. New materials and an innovative manufacturing process result in superior braking performance, greater longevity and less weight than cast iron or other stainless steel rotors. Used by top racers around the world. Rotors are sold each; you must order two discs for dual-disc front applications. Innovative design uses entire brake pad surface evenly while eliminating the need to drill holes for weight reduction, which results in a lighter, stronger and more efficient rotor. Able to withstand heat cycles without warping, which provides maximum stopping power while remaining perfectly flat.. STX10D
Expected Soon
More Info/Options for Braking Rotor-Front 194648
|
|
|
|
$265.99
Braking Rotor-Front 1900472
Dennis Kirk Part #: 1900472
Braking Rotor-Front 1900472: Unlock your bikes braking potential. Made from high-carbon content stainless steel. New materials and an innovative manufacturing process result in superior braking performance, greater longevity and less weight than cast iron or other stainless steel rotors. Used by top racers around the world. Rotors are sold each; you must order two discs for dual-disc front applications. Innovative design uses entire brake pad surface evenly while eliminating the need to drill holes for weight reduction, which results in a lighter, stronger and more efficient rotor. Able to withstand heat cycles without warping, which provides maximum stopping power while remaining perfectly flat..
1 on Hand
More Info/Options for Braking Rotor-Front 1900472
|
|
|
|
$265.99
Braking Rotor-Front 195755
Dennis Kirk Part #: 195755
Braking Rotor-Front 195755: Manufacturer part # STX48D - Unlock your bikes braking potential. Made from high-carbon content stainless steel. New materials and an innovative manufacturing process result in superior braking performance, greater longevity and less weight than cast iron or other stainless steel rotors. Used by top racers around the world. Rotors are sold each; you must order two discs for dual-disc front applications. Innovative design uses entire brake pad surface evenly while eliminating the need to drill holes for weight reduction, which results in a lighter, stronger and more efficient rotor. Able to withstand heat cycles without warping, which provides maximum stopping power while remaining perfectly flat.. STX48D
1 on Hand
More Info/Options for Braking Rotor-Front 195755
|
|
|
|
$303.99
Braking Rotor-Front 1901115
Dennis Kirk Part #: 1901115
Braking Rotor-Front 1901115: Unlock your bikes braking potential. Made from high-carbon content stainless steel. New materials and an innovative manufacturing process result in superior braking performance, greater longevity and less weight than cast iron or other stainless steel rotors. Used by top racers around the world. Rotors are sold each; you must order two discs for dual-disc front applications. Innovative design uses entire brake pad surface evenly while eliminating the need to drill holes for weight reduction, which results in a lighter, stronger and more efficient rotor. Able to withstand heat cycles without warping, which provides maximum stopping power while remaining perfectly flat..
1 on Hand
More Info/Options for Braking Rotor-Front 1901115
|
|
|
|
$303.99
Braking Rotor-Front 1901110
Dennis Kirk Part #: 1901110
Braking Rotor-Front 1901110: Unlock your bikes braking potential. Made from high-carbon content stainless steel. New materials and an innovative manufacturing process result in superior braking performance, greater longevity and less weight than cast iron or other stainless steel rotors. Used by top racers around the world. Rotors are sold each; you must order two discs for dual-disc front applications. Innovative design uses entire brake pad surface evenly while eliminating the need to drill holes for weight reduction, which results in a lighter, stronger and more efficient rotor. Able to withstand heat cycles without warping, which provides maximum stopping power while remaining perfectly flat..
1 on Hand
More Info/Options for Braking Rotor-Front 1901110
|
|
|
|
$265.99
Braking Rotor-Front 1900474
Dennis Kirk Part #: 1900474
Braking Rotor-Front 1900474: Manufacturer part # STX85D - Unlock your bikes braking potential. Made from high-carbon content stainless steel. New materials and an innovative manufacturing process result in superior braking performance, greater longevity and less weight than cast iron or other stainless steel rotors. Used by top racers around the world. Rotors are sold each; you must order two discs for dual-disc front applications. Innovative design uses entire brake pad surface evenly while eliminating the need to drill holes for weight reduction, which results in a lighter, stronger and more efficient rotor. Able to withstand heat cycles without warping, which provides maximum stopping power while remaining perfectly flat.. STX85D
1 on Hand
| |
