|
|
CLEARANCE!
Was: $66.99
Now: $26.80
X-Large Nelson-Rigg Standard Chopper Dust Covers
Dennis Kirk Part #: 560630XL
X-Large Nelson-Rigg Standard Chopper Dust Covers: Manufacturer part # CDC72804XL - Protects from dust and spills. Constructed from a soft non-scratch, brushed, breathable Poly/Cotton. Standard cover is made with lightweight material and is light yellow in color. Deluxe cover is made with medium weight material and is black in color. Fit most choppers with up to a 72 in. L or 110 in. XL wheelbase. , , NOTE: Not intended for trailering. CDC72804XL
10 on Hand
More Info/Options for X-Large Nelson-Rigg Standard Chopper Dust Covers
|
|
|
|
CLEARANCE!
Was: $75.99
Now: $30.40
Large Nelson-Rigg Deluxe Chopper Dust Covers
Dennis Kirk Part #: 560631L
Large Nelson-Rigg Deluxe Chopper Dust Covers: Manufacturer part # CDC82803LG - Protects from dust and spills. Constructed from a soft non-scratch, brushed, breathable Poly/Cotton. Standard cover is made with lightweight material and is light yellow in color. Deluxe cover is made with medium weight material and is black in color. Fit most choppers with up to a 72 in. L or 110 in. XL wheelbase. , , NOTE: Not intended for trailering. CDC82803LG
10+ on hand
More Info/Options for Large Nelson-Rigg Deluxe Chopper Dust Covers
|
|
|
|
$22.99
X-Large Nelson-Rigg Graphite Black Econo Covers
Dennis Kirk Part #: 560465XL
X-Large Nelson-Rigg Graphite Black Econo Covers: Manufacturer part # MC90004XL - Soft PVC ripstop construction is tough and guaranteed not to scratch any part of your motorcycle; 100 percent waterproof. Reinforced grommets in the front, middle and rear provide secure tie-down. Ventilated using the Cool-Vent system. Fit every bike and scooter. , , NOTE: For 50-250cc motorcycles, mopeds or scooters. , , NOTE: Not intended for trailering. MC90004XL
10+ on hand
More Info/Options for X-Large Nelson-Rigg Graphite Black Econo Covers
|
|
|
|
|
|
CLEARANCE!
Was: $75.99
Now: $45.59
Medium Nelson-Rigg FC-850 Covers
Dennis Kirk Part #: 560628M
Medium Nelson-Rigg FC-850 Covers: Manufacturer part # FC85002MD - 100% waterproof. Constructed with Tri-Max nylon. Electronically heat-sealed seams and heat shield lower panels; soft windshield panel protector. Perma-Venting system prevents a condensation build-up and permits air circulation at all times. Elastic bottom with 1 in. grommets fits snugly at center and front wheel. Packed into its own storage bag. Backrest pouch folds into cover when not needed for better style. Fits all, , NOTE: Not intended for trailering. FC85002MD
1 on Hand
More Info/Options for Medium Nelson-Rigg FC-850 Covers
|
|
|
|
$9.99
Nelson-Rigg Security Lock 504124
Dennis Kirk Part #: 504124
Nelson-Rigg Security Lock 504124: Manufacturer part # RPL50 - Compact, heavy-duty combination lock. With over 1000 different combinations, this versatile lock can be used on any of the RiggPak" openings to keep contents secure. Carries Nelson Riggs No Hassle lifetime warranty. Direct replacement for locks with 50-4129, 50-4130, 50-4131 and 50-4132.. RPL50
2 on Hand
More Info/Options for Nelson-Rigg Security Lock 504124
|
|
|
|
$71.99
XX-Large Nelson-Rigg Defender 600 Covers
Dennis Kirk Part #: 560252XXL
XX-Large Nelson-Rigg Defender 600 Covers: Manufacturer part # DE60005XX - 100 percent waterproof. Constructed from a lighter weight top quality Tri-Max treated polyester. UVEX-treated to block out harmful UV rays that are the leading cause of color fading. Double-stitched, electrically heat-sealed seams and heat shield lower panels; soft windshield panel protector. The Perma-Venting system prevents condensation build-up and permits constant air circulation. Elastic bottom with 1 in. grommets fits snugly at center and front wheel. Packed into its own tough backpack. , , NOTE: Not intended for trailering. DE60005XX
3 on Hand
More Info/Options for XX-Large Nelson-Rigg Defender 600 Covers
|
|
|
|
$71.99
XX-Large Nelson-Rigg Defender 500 Covers
Dennis Kirk Part #: 560430XXL
XX-Large Nelson-Rigg Defender 500 Covers: Manufacturer part # DE50005XX - 100 percent waterproof. Constructed from a lighter weight top quality Tri-Max® treated polyester. UVEX-treated to block out harmful UV rays that are the leading cause of color fading. Double-stitched, electrically heat-sealed seams and heat shield lower panels; soft windshield panel protector. The Perma-Venting® system prevents condensation build-up and permits constant air circulation. Elastic bottom with 1 in. grommets fits snugly at center and front wheel. Includes zipper storage bag with web strap handles. , , NOTE: Not intended for trailering. DE50005XX
2 on Hand
More Info/Options for XX-Large Nelson-Rigg Defender 500 Covers
|
|
|
|
|
|
|
|
$47.99
Nady Helmetalk Headset with Helmet-Mount 406912
Dennis Kirk Part #: 406912
Nady Helmetalk Headset with Helmet-Mount 406912: Manufacturer part # HTCS3CS - For use with most two-way FRS/GMRS radios. Include both single and double-prong connectors for easy hook-up. To install and remove microphones and earpad speakers easily, use hook-and-loop pads. NOTE: For use with most two-way vox (voice activated) FRS/GMRS radios with 3.5mm male stereo plug. Also includes cables with the following ends: 1) Standard 2.5mm stereo male plug; 2) Dual male mono plug; 3) Reversed polarity 2.5mm male stereo extended length plug (if your unit requires a 2.5mm or 3.5mm plug with reverse polarity, you may require an additional 2.5mm stereo female to male 2.5mm or 3.5mm stereo adapter, which is not available from Dennis Kirk) NOTE: For use with full-face helmets. Two helmet speakers are included.. HTCS3CS
5 on Hand
More Info/Options for Nady Helmetalk Headset with Helmet-Mount 406912
|
|
|
|
|
|
$47.99
Nady Helmetalk Headset with Boom Mic 406911
Dennis Kirk Part #: 406911
Nady Helmetalk Headset with Boom Mic 406911: Manufacturer part # HTCS3OS - For use with most two-way FRS/GMRS radios. Include both single and double-prong connectors for easy hook-up. To install and remove microphones and earpad speakers easily, use hook-and-loop pads. NOTE: For use with most two-way vox (voice activated) FRS/GMRS radios with 3.5mm male stereo plug. Also includes cables with the following ends: 1) Standard 2.5mm stereo male plug; 2) Dual male mono plug; 3) Reversed polarity 2.5mm male stereo extended length plug (if your unit requires a 2.5mm or 3.5mm plug with reverse polarity, you may require an additional 2.5mm stereo female to male 2.5mm or 3.5mm stereo adapter, which is not available from Dennis Kirk) NOTE: For use with open-face helmets. Two helmet speakers are included.. HTCS3OS
2 on Hand
More Info/Options for Nady Helmetalk Headset with Boom Mic 406911
|
|
|
|
$113.99
Nady PMC-3X Intercom/FM Radio 407052
Dennis Kirk Part #: 407052
Nady PMC-3X Intercom/FM Radio 407052: Manufacturer part # PMC3X - Crisp, clear conversation between driver and passenger, even at highway speeds. Both models now let you communicate with other bikes using optional adapter cables; just plug any FRS/GMRS or PMR 2-way radio with VOX into the added jack. PMC-2 features a new microphone design to help block wind noise up to 80mph-407051. PMC-3 includes a powerful FM radio in same unit. Hands-free operation -- radio volume automatically lowers when conversation starts. Mounting is simple -- no tools or any helmet modifications are required; use with any helmet. Lightweight and compact; weighs less than 4 oz. and measures only 4 in. L x 2.75 in. W x .65 in. thick. Clip on belt or slip in shirt pocket. Include two MO-type headsets for open-face helmets like Part No. 40-7051. Full-duplex operation, like telephones. Require three AAA batteries (included) or optional Battery Eliminator-40186. Optional full face headset-407057.. PMC3X
8 on Hand
More Info/Options for Nady PMC-3X Intercom/FM Radio 407052
|
|
|
|
|
|
|
|
$88.99
Nady PMC-2X Intercom 407051
Dennis Kirk Part #: 407051
Nady PMC-2X Intercom 407051: Manufacturer part # PMC2X - Crisp, clear conversation between driver and passenger, even at highway speeds. Both models now let you communicate with other bikes using optional adapter cables; just plug any FRS/GMRS or PMR 2-way radio with VOX into the added jack. PMC-2 features a new microphone design to help block wind noise up to 80mph. PMC-3 includes a powerful FM radio in same unit-407052. Hands-free operation -- radio volume automatically lowers when conversation starts. Mounting is simple -- no tools or any helmet modifications are required; use with any helmet. Lightweight and compact; weighs less than 4 oz. and measures only 4 in. L x 2.75 in. W x .65 in. thick. Clip on belt or slip in shirt pocket. Include two MO-type headsets for open-face helmets. Full-duplex operation, like telephones. Require three AAA batteries (included) or optional Battery Eliminator-40186. Optional full face headset-407057.. PMC2X
4 on Hand
More Info/Options for Nady PMC-2X Intercom 407051
|
|
|
|
$122.99
Nady MRC-11X FRS Motorcycle/Snowmobile Radio Communicator 407053
Dennis Kirk Part #: 407053
Nady MRC-11X FRS Motorcycle/Snowmobile Radio Communicator 407053: Manufacturer part # MRC11X - Allows user to talk to another rider from 7 miles away -- several times the range of other communicators. Voice activated or push-to-talk communication. Special noise-canceling/wind-blocking headsets for maximum clarity and freedom mean no shouting necessary, even in noisiest conditions. Simultaneous driver/passenger conversations. 22 FRS/GMRS channels and 38 privacy codes. Large 16-function LCD display helps monitor the selected channels and codes including check battery condition and transmit/receiver status. Auxiliary input lets you listen to CDs or other external music sources. Includes MHS-11X premium headset for open-face helmets. Push-to-talk button included. Requires 4 AAA batteries (not included). Sold each, , Optional/Replacement headsets to be used for either driver and passenger Open-face headset order Part No. 40-7058, Full-face headset order Part No. 40-7059. MRC11X
10 on Hand
More Info/Options for Nady MRC-11X FRS Motorcycle/Snowmobile Radio Communicator 407053
|
|
|
|
|
|
|
|
$105.95
Harley-Davidson Motorcycle Cover with Eagle Logo 560781
Dennis Kirk Part #: 560781
Harley-Davidson Motorcycle Cover with Eagle Logo 560781: Manufacturer part # 98724-92B - This specially-sized and shaped cover fits all models. Exhaust heat shield panels located on both sides protect the cover form most H-D exhaust systems. Constructed from durable 250 denier polyester with elastic edges, this water repellent cover also features a protective flannel windshield liner and convenient storage pouch. These covers are not intended to be used for long-term storage. , , NOTE: Not intended for trailering. 98724-92B
2 on Hand
More Info/Options for Harley-Davidson Motorcycle Cover with Eagle Logo 560781
|
|
|
|
|
|
$44.99
Harley-Davidson Motorcycle Inc Decal 528555
Dennis Kirk Part #: 528555
Harley-Davidson Motorcycle Inc Decal 528555: Manufacturer part # 14002-82 - Genuine Harley-Davidson decals are screen printed, one color at a time, on a 2 mil. thick base with self-adhesive backing. A permanent protective coat is applied as well as application tape to protect the decal prior to and during installation. All materials have been carefully selected for maximum durability. The inks will remain vibrant throughout the life of your motorcycle. , NOTE: Dimensions: 1.875 in. x 7 in.. 14002-82
4 on Hand
More Info/Options for Harley-Davidson Motorcycle Inc Decal 528555
|
|
|
|
