|
|
|
|
$434.99
H18777 Mid USA Stretched Chopper Gas Tank -Raised Cap Bung
Dennis Kirk Part #: H18777
H18777 Mid USA Stretched Chopper Gas Tank -Raised Cap Bung: Manufacturer part # 81074 - 4.5 in. stretched chopper gas tank. 4.7 gallon capacity. Mounting brackets are rubber isolated to prevent vibration cracks. "Weld to frame" brackets recess in the bottom of the tank for a hidden look. Include chrome plated pop-up gas cap. Tapped 1/8" 27 NPT at rear of tank for gas crossover line (not included). Use with 3/16" (22mm) fuel valve. Raw steel finish. Frame requirements: 4" stretch in the front down tubes 3" minimum stretch in the backbone Backbone o.d. cannot exceed 1 3/4", , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 81074
2 on Hand
More Info/Options for H18777 Mid USA Stretched Chopper Gas Tank -Raised Cap Bung
|
|
|
|
|
|
$373.99
Mid USA Round Oil Tank for Custom Use 492629
Dennis Kirk Part #: 492629
Mid USA Round Oil Tank for Custom Use 492629: Manufacturer part # 86082 - These tanks feature our exclusive oil return routing system. The internal oil return tube is extend allowing it to dump the hot returned engine oil to the far left side of the oil tank. This keeps the returned oil as far away from the feed line, creating an efficient circulating effect.. Lower left hand relief for use with a chain or belt rear drive. The domed side tank measures 12 1/2" long with a Center fill. Tank bodies measure 6 1/2" O.D.. Made from 16 gauge steel to resist cracking. 100% TIG welded for maximum strength. Includes heavy duty front mount and fill plug. Use with Softail size battery and OE style rear tank mount. Uses 1/8-27 NPT fittings for vent, return and feed lines, and 1/4-18 NPT fittings for oil drain. For best results use our H49-0490 rubber mounts. , , Note: As with any new oil tank, always thoroughly inspect and flush before installing. 86082
1 on Hand
More Info/Options for Mid USA Round Oil Tank for Custom Use 492629
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$35.99
10 3/4 in. Russell Fuel Line Crossover
Dennis Kirk Part #: 182617
10 3/4 in. Russell Fuel Line Crossover: Manufacturer part # R54320 - Braided stainless steel hoses feature 5/16 in. i.d. for maximum fuel flow. Attach to crossover tubes with compression fittings for a positive seal -- no more worm gear clamps. Measure 10.75 in. long. Made in the U.S.A.. Replacement seals available, part number H49-736.. R54320
5 on Hand
More Info/Options for 10 3/4 in. Russell Fuel Line Crossover
|
|
|
|
$33.99
5 1/2 in. Russell Fuel Line Crossover
Dennis Kirk Part #: 182618
5 1/2 in. Russell Fuel Line Crossover: Manufacturer part # R54321 - Braided stainless steel hoses feature 5/16 in. i.d. for maximum fuel flow. Attach to crossover tubes with compression fittings for a positive seal -- no more worm gear clamps. Measure 10.75 in. long. Made in the U.S.A.. Replacement seals available, part number H49-736.. R54321
1 on Hand
More Info/Options for 5 1/2 in. Russell Fuel Line Crossover
|
|
|
|
|
|
|
|
|
|
$114.99
Feuling Motor Company Oil Tank Breather Kit 493888
Dennis Kirk Part #: 493888
Feuling Motor Company Oil Tank Breather Kit 493888: Manufacturer part # 3075 - Releases power-robbing pressure from oil tank and crank case and reduces blow-by. Promotes proper oil flow and oil tank function. Features braided steel lines and stainless steel fittings; breather line is coated with clear PVC. Includes gasket, thread sealant, necessary hardware and installation instructions. Made in the U.S.A.. , , NOTE: Requires removal of dipstick housing for installation.. 3075
1 on Hand
More Info/Options for Feuling Motor Company Oil Tank Breather Kit 493888
|
|
|
|
$114.99
Feuling Motor Company Oil Tank Breather Kit 493886
Dennis Kirk Part #: 493886
Feuling Motor Company Oil Tank Breather Kit 493886: Manufacturer part # 3070 - Releases power-robbing pressure from oil tank and crank case and reduces blow-by. Promotes proper oil flow and oil tank function. Features braided steel lines and stainless steel fittings; breather line is coated with clear PVC. Includes gasket, thread sealant, necessary hardware and installation instructions. Made in the U.S.A.. , , NOTE: Requires removal of transmission/oil tank cover for installation.. 3070
2 on Hand
More Info/Options for Feuling Motor Company Oil Tank Breather Kit 493886
|
|
|
|
$1234.99
Eddie Trottas Thunder Design D-2 Gas Tank 183343
Dennis Kirk Part #: 183343
Eddie Trottas Thunder Design D-2 Gas Tank 183343: Manufacturer part # TC-479 - 16-gauge steel construction. This tank has sunken, hidden mounts. 3/8in. NPT petcock fittings. 13in. at widest point. Approximately 2in. tunnel width for use with 1 3/4in. tubing. Compatible with most Choppers and Pro-Street frames. Includes pop-up gas cap and recessed mounts, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. TC-479
1 on Hand
More Info/Options for Eddie Trottas Thunder Design D-2 Gas Tank 183343
|
|
|
|
|
|
