|
|
|
|
|
|
|
|
|
|
$359.95
Drag Specialties 2 in. Extended Dash Style Gas Tank w/1 Screw Bung and Dummy Bung for OEM Gas Gauge 183249
Dennis Kirk Part #: 183249
Drag Specialties 2 in. Extended Dash Style Gas Tank w/1 Screw Bung and Dummy Bung for OEM Gas Gauge 183249: Manufacturer part # 012844 - 2" extended-length tanks are made from 16-gauge stamped steel. 5.1 gallon capacity. Available in dash-style design with provisions for mounting stock-style dash and ignition switch (not included). Screw-in cap tanks require the use of 82-E96 gas caps (sold separately). Tanks with fuel gauge bungs accept OEM-style or aftermarket fuel gauges. Uses 22mm petcock. , , NOTE: Seat nose may require modification to fit properly with extended tanks, , NOTE: For Softail models 01-07 with fuel injection and Softail models 04-06 with carb (except FXSTD), , NOTE: Requires the use of petcock adapter OEM NO. 62842-00 or DK Part No. 182865 when used in listed carb applications, , WARNING: , All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems DIMENISIONS: Length: 21 in.. Width: 17 in.. Tunnel Length 18-3/4 in.. TUNNEL WIDTH: Front: 3-1/16 in.. Rear: 2-3/8 in.. TUNNEL DEPTH: Front: 6-1/2 in.. Rear: 1-1/4 in.. Tank Height: 9-1/4 in.. Fuel Petcock: Rear Left. Petcock thread size: 22mm. Gas cap type: Threaded.. 012844
1 on Hand
More Info/Options for Drag Specialties 2 in. Extended Dash Style Gas Tank w/1 Screw Bung and Dummy Bung for OEM Gas Gauge 183249
|
|
|
|
|
|
|
|
|
|
|
|
CLEARANCE!
Was: $419.95
Now: $214.95
H18695 Drag Specialties 4 in. Extended Smooth Top Tank with Dual Screw-In Caps
Dennis Kirk Part #: H18695
H18695 Drag Specialties 4 in. Extended Smooth Top Tank with Dual Screw-In Caps: Manufacturer part # 11644BX46 - Smooth-top or dash style, one-piece tanks with screw-in caps, Aero locking caps or flush locking caps. 4 in. extension consists of a 2 in. extended tank with an additional 2 in. dummy extension. Aero and flush caps included; screw-in caps must be purchased separately (use 82-E96 style). Custom gauge, dash lights and switch mounting required for smooth-top tanks. Comes complete with all necessary mounting hardware. 4.2 gallon capacity. , NOTE: 96-99 models require pre-95 screw-in gas caps and petcock, , WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed before being painted to eliminate potential problems. 11644BX46
4 on Hand
More Info/Options for H18695 Drag Specialties 4 in. Extended Smooth Top Tank with Dual Screw-In Caps
|
|
|
|
$229.95
H18244 Drag Specialties Fat Bob Flatside Tank with Bungs
Dennis Kirk Part #: H18244
H18244 Drag Specialties Fat Bob Flatside Tank with Bungs: Manufacturer part # 011242BX36 - For 82-E96 screw-in gas caps (caps sold separately). Beautiful reproductions manufactured to exact OEM specifications. Available in 3 1/2, 5, and 6 gallon versions. Your choice of flush-mount locking gas caps (included), or with screw-in bungs for screw-in gas caps. Drawn steel construction with an unpainted steel finish. Stock dash may need to be shimmed on some applications, , NOTE: , Will fit 96-99 models (except F.I. models) when used with pre-95 gas caps and petcock, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011242BX36
1 on Hand
More Info/Options for H18244 Drag Specialties Fat Bob Flatside Tank with Bungs
|
|
|
|
$399.95
H18223 Drag Specialties Quickbob Rubbermount Gas Tank with Dash, Base and Screw-In Bungs
Dennis Kirk Part #: H18223
H18223 Drag Specialties Quickbob Rubbermount Gas Tank with Dash, Base and Screw-In Bungs: Manufacturer part # 011474 - 95-02 models require H18225. One-piece replicas of Fat Bob tanks with 3.6-gallon capacity. Complete dash assembly, with flush-mount locking gas caps or with bungs for screw-in type caps; each comes with rubber mount brackets and hardware. Speedometer not included; any Drag Specialties 4 5/8 in. speedometer for use with FL dash will work (except H40-0109) with H18-223 tank on 82-94 models. If you want to use the OEM electronic speedometer on 95-01 models, order H18-223 or H18-224 tank along with H18-225 mount kit with dash (mount kit also includes coil and ignition switch relocation brackets), , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011474
2 on Hand
More Info/Options for H18223 Drag Specialties Quickbob Rubbermount Gas Tank with Dash, Base and Screw-In Bungs
|
|
|
|
$369.95
H18865 Drag Specialties One-Piece Dash Style Tank w/Fuel Gauge Bung
Dennis Kirk Part #: H18865
H18865 Drag Specialties One-Piece Dash Style Tank w/Fuel Gauge Bung: Manufacturer part # 011813BX46 - Drag Specialties is an industry-leading dealer-distributor of aftermarket parts and accessories for Harley-Davidson®. Two things go hand in hand at Drag: quality and quantity. Standard-length tank is made from 16-gauge stamped steel. 5.1-gal. capacity. Dash-style design with provisions for mounting stock-style dash and ignition switch (not included). Single screw-in cap tank require the use of 82-E96 gas caps (sold separately). Fuel gauge bungs accept OEM-style or aftermarket fuel gauges, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011813BX46
1 on Hand
More Info/Options for H18865 Drag Specialties One-Piece Dash Style Tank w/Fuel Gauge Bung
|
|
|
|
|
|
|
|
|
|
$236.95
H18682 Drag Specialties Gas Tank w/Chrome Aero Style Cap
Dennis Kirk Part #: H18682
H18682 Drag Specialties Gas Tank w/Chrome Aero Style Cap: Manufacturer part # 011743BX39 - Heavy-gauge steel construction. Rubber-mounted bolt-on style with flat bottom. Seams are reinforced and have extra-strong mounting tabs. Features a high-tunnel design to add fuel capacity without looking tall. Aero-style locking gas cap with keys. Accepts a 22mm petcock (right side). 3.3 gallon capacity. May require seat nose modification and relocation of ignition switch, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011743BX39
2 on Hand
More Info/Options for H18682 Drag Specialties Gas Tank w/Chrome Aero Style Cap
|
|
|
|
$399.95
H18867 Drag Specialties One-Piece 2 in. Extended Dash Style Tank
Dennis Kirk Part #: H18867
H18867 Drag Specialties One-Piece 2 in. Extended Dash Style Tank: Manufacturer part # 011806BX46 - Standard-length or 2 in. extended-length tanks are made from 16-gauge stamped steel. 5.1-gal. capacity. Available in smooth-top design that eliminate the dash completely (requires custom mounting of gauges, ignition switch and dash lights) and dash-style design with provisions for mounting stock-style dash and ignition switch (not included). Dual screw-in cap tank requires the use of 82-E96 gas caps (sold separately). , , NOTE: Seat nose may require modification to fit properly with extended tanks, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011806BX46
1 on Hand
More Info/Options for H18867 Drag Specialties One-Piece 2 in. Extended Dash Style Tank
|
|
|
|
|
|
CLOSEOUT!
Was: $355.95
Now: $349.95
H182027 Drag Specialties 2 in. Extended Two-Piece Flat-Side Gas Tank
Dennis Kirk Part #: H182027
H182027 Drag Specialties 2 in. Extended Two-Piece Flat-Side Gas Tank: Manufacturer part # 11584BX46 - For use with dual screw-in caps. Tanks is fully functional. 2 in. extended tank has no dummy extension welded to rear of tank. Raw finish and accepts stock-style speedometer and dash. Shaped to fit around the nose of most seats (some seats may require modification). 5.2 gallon capacity for use with standard screw-in cap (sold separately use 82-E96 style), , NOTE: 96-99 models require pre-95 screw-in gas caps and petcock, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 11584BX46
1 on Hand
More Info/Options for H182027 Drag Specialties 2 in. Extended Two-Piece Flat-Side Gas Tank
|
|
|
|
|
|
$349.95
H18531 Drag Specialties One-Piece Smooth-Top Extended Gas Tank with Single Screw-In Cap
Dennis Kirk Part #: H18531
H18531 Drag Specialties One-Piece Smooth-Top Extended Gas Tank with Single Screw-In Cap: Manufacturer part # 011675BX40 - Smooth-Top tank has no dummy extension, 4.2 gallon, dash-style tank is fully functional. Area cut out for the nose of the stock seat. Tank has an arched bottom for that great banana look. Smooth-top tank eliminates the dash completely and will require custom mounting of ignition switch, dash lights and speedometer. Tank measures 22 in. L by 16 in. W. Single screw-in cap is not included and must be purchased separately (use 82-E96 style caps). All necessary hardware included. , NOTE: 96-99 models require the use of pre-96 petcock, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011675BX40
1 on Hand
More Info/Options for H18531 Drag Specialties One-Piece Smooth-Top Extended Gas Tank with Single Screw-In Cap
|
|
|
|
$299.95
H18245 Drag Specialties Fat Bob Flatside Tank with Bungs
Dennis Kirk Part #: H18245
H18245 Drag Specialties Fat Bob Flatside Tank with Bungs: Manufacturer part # 011338BX37 - For 82-E96 screw in gas caps (caps sold separately). Beautiful reproductions manufactured to exact OEM specifications. Available in 3 1/2, 5, and 6 gallon versions. Screw-in bungs for screw-in gas caps. Drawn steel construction with an unpainted steel finish. Stock dash may need to be shimmed on some applications, , WARNING: All tanks are shipped unpainted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.. 011338BX37
| |
