|
|
|
|
$36.95
Moose Push Tube Conversion Kit 514838
Dennis Kirk Part #: 514838
Moose Push Tube Conversion Kit 514838: Kit converts old-style push tubes for use with extended lift system bottom mount kits (see ATV Plow Mount Hardware Applications). Extended lift bottom mount kits increase ground clearance to 13"-14" when used with a winch or electric lift. Updated bottom mount provides more ground clearance after the plow blade is removed for the summer. This will not work with universal manual hand lift part no. 51-4356..
3 on Hand
More Info/Options for Moose Push Tube Conversion Kit 514838
|
|
|
|
|
|
|
|
|
|
|
|
$269.99
Superwinch Freedom Switch Kit 514595
Dennis Kirk Part #: 514595
Superwinch Freedom Switch Kit 514595: Manufacturer part # 06202 - Superwinch products are the winches trusted by professionals and weekenders alike for everything from racing to recovery, boating to off-roading. Instant on and off for immediate control -- no delay. Signal recognition up to 150 ft. Compact shielded antenna makes remote mounting simple. Plug and play components ensure quick installation. Sealed tough and tight for all conditions. For Superwinch winches ATV2000, T2000 and T1500. INCLUDED ITEMS . (1) Power distribution module (2) Remote transmitters (1) Antenna (1) Wiring harness (1) Instruction sheet. 06202
1 on Hand
More Info/Options for Superwinch Freedom Switch Kit 514595
|
|
|
|
$426.99
Warn Power Pivot for Warn Blades 516348
Dennis Kirk Part #: 516348
Warn Power Pivot for Warn Blades 516348: Bolts to WARN plow base/tube assembly. Electrically pivots plow blade without rider getting off ATV. Pivots blade up to 25 degrees under load with no slipping. Strong motor features 4-stage planetary gear train. Easy installation with color-coded wiring. NOTE: When using the Power Pivot, you must use a winch for plow lifting which can be found by your make, model, and year.. Not for use with a universal manual lift Part No. 516324 or electric actuator Part No. 516325 , , INCLUDED ITEMS: . , (6) 3/8 Lock Nuts, (2) Latch Pins, (2) No. 6 in.-32 x 7/8 in. Screws, (3) Short Cable Ties, (3) Long Cable Ties, (1) Wire Conduit, (2) Splice Connectors, (1) Switch, (1) Contactor, (1) ATV Power-Pivot assembly, (1) Instruction sheet.
1 on Hand
More Info/Options for Warn Power Pivot for Warn Blades 516348
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$2.95
Moose Electric Lift Lower Mounting Pin Short 514590
Dennis Kirk Part #: 514590
Moose Electric Lift Lower Mounting Pin Short 514590: Designed with a dual purpose: to lift the plow without manual effort and leave the winch for what it was designed to do. Will operate only with the ignition on and comes standard with a thermal limiting switch that eliminates the possibility of damage to the ATV, plow or actuator. A new motor delivers increased performance: single-line pulling capacity is rated at 300 lbs., more than enough power to reliably lift the heaviest blade. New cable termination strap -- universal design for easy on and off; eliminates the need for a pulley bracket. A handlebar-mounted switch can be operated without removing your hand from the grip; this switch is built to survive rain, cold, mud and other contaminants and still perform. Easy-to-install kit includes a handlebar switch, wiring harness,cable termination strap and all necessary hardware..
5 on Hand
More Info/Options for Moose Electric Lift Lower Mounting Pin Short 514590
|
|
|
|
|
|
|
|
$99.95
Moose Lift Kit 582767
Dennis Kirk Part #: 582767
Moose Lift Kit 582767: Manufacturer part # LP841136 - Increase performance in deep ruts, mud and snow. Better ground clearance over stumps and rocks. Simple bolt-on operation with clear instructions. Increased ground clearance for less tire/fender rub. Will lift 1" - 2" depending on machine. Made of milled aluminum.. LP841136
Expected Soon
More Info/Options for Moose Lift Kit 582767
|
|
|
|
$134.95
Moose Universal Manual Hand Lift Kit 514356
Dennis Kirk Part #: 514356
Moose Universal Manual Hand Lift Kit 514356: Universal manual hand lift kit works with extended push tubes only and it is sold separately; not necessary with an electric lift, winch mount or E-Z lift kit. NOTE: This will only work with the extended push tubes WHAT TO ORDER WITH THIS ITEM: Plow Blade: Choose one of 42 in., 50 in. 55 in., 60 in., or 72 in. Standard Blade; or a 50 in. or 60 in. Country Blade. Extended Bottom Mount: To be searched by make, model, and year Extended Lift Push Tube: To be searched by make, model, and year. If you be will using a Track System on an ATV order Part No. 516089 , , INCLUDED ITEMS:. , (1) Lower handle, (1) Upper handle, (1) Rear crank, (1) Front crank, (1) Push rod, (1) Front crank clamp, (2) Front crank clamp plate, (1) Push rod clevis, (1) Handle clevis, (1) 5/16 in. x 1 in. socket head bolt, (2) 5/16 in. x 1 1/2 in. hex head bolt, (1) 5/16 in. x 1 in. hex head bolt, (6) 5/16 in. x 2 1/4 in. hex head bolt, (1) 1/2 in. x 1 3/4 in. shoulder bolt, (1) 3/8 in. x 5/8 in. shoulder bolt, (2) Snap on axle cap, (2) 1 in. x 3/4 in. ID flanged bushings, (1 1 x 36 utility strap, (1)1 in. black grip, (1) 12 in. chain with 5/16 in. snap hook, (5) 5/16 in. flanged nut, (7) 5/16 in. nylock nut, (1) 3/8 in. nylock nut, (1) 1/2 in. jam nut, (8) 5/16 in. flat washer, (1) 3/4 in. flat washer, (1) 3/8 in. flat washer, (2) 3/8 in. x 1 in. hex bolts, (2) 3/8 in. flanged nuts, (1) Spacer, (1) Instruction sheet.
2 on Hand
More Info/Options for Moose Universal Manual Hand Lift Kit 514356
|
|
|
|
$219.95
Moose E-Z Lift Kit 512810
Dennis Kirk Part #: 512810
Moose E-Z Lift Kit 512810: Spring-assisted E-Z lift systems easily lift plow blade a full 8 in. off the found (higher than other manual lift kits); easy-to-install design features 1/4 in. steel mounting plate with 3/8 in. steel lifting arms. WHAT TO ORDER: Plow Blade: Choose one of any size Standard Blade or Country Blade. Extended Bottom Mount: To be searched by make, model, and year Extended Lift Push Tube: To be searched by make, model, and year , , INCLUDED ITEMS:. , (1) Bell crank, (1) Bell crank pivot rod, (1) Lift assist spring, (3) 5/16 in. x 1 1/8 in. x 1 3/4 in. U-Bolts, (6) 5/16 in. flat washers, (6) 5/16 in. nylock nuts, (1) 3/8 in. x 8 in. eye bolt, (1) 3/8 in. flat washer, (1) 3/8 in. nylock nut, (1) Spring attach bracket, (2) 3/8 in. x 1 in. hex bolts, (1) Lift handle spring, (1) Lift handle, (1) Grip, (1) Lift handle bracket, (1) Lift handle pivot rod, (1) 3/8 in. x 1 in. hex bolt, (1) 3/8 in. nylock nut, (1) Lift handle notched bracket, (1) 3/8 in. x 1 1/4 in. hex bolt, (1) 3/8 in. nylock nut, (1) 3/8 in. x 1 1/2 in. shoulder bolt, (1) 5/16 in. nylock nut, (4) 3/4 in. end cap, (1) Lift handle attaching bracket, (1) Main plate, (1) 3/8 in. x 1 in. hex bolt, (1) 3/8 in. nylock nut, (1) 1/2 in. x 1 1/4 in. shoulder bolt, (1) 3/8 in. nylock jam nut, (1) Adjustable lift rod, (1) 1/2 in. jam nut, (1) Lift rod, (1) 1/2 in. x 2 1/4 in. shoulder bolt, (1) 3/8 in. nylock jam nut, (1) Snap hook, (1) 26 in. lift chain, (1) Safety lock rod, (2) No. 3 hair pin, (1) 16 in. split black assist spring cover, (1) Instruction sheet.
3 on Hand
More Info/Options for Moose E-Z Lift Kit 512810
|
|
|
|
|
|
$107.95
Moose Extended Lift Bottom Mount for 1993-03 Gator 4x2/6x4/Diesel 514289
Dennis Kirk Part #: 514289
Moose Extended Lift Bottom Mount for 1993-03 Gator 4x2/6x4/Diesel 514289: Quick-connect mounting hardware allows easy hook-up and fast removal. Universal, heavy-duty push tube withstands the roughest use. Blade swivel constructed of 3/8 in. steel with 20 in. blade attaching points for greater blade support and strength. Open swivel eliminates dirt and snow build-up in the pivot point. Five blade swivel positions and four-way blade pitch adjustment. ATV plow bottom-mount kits include all necessary hardware to attach universal push tube and plow to your ATV. Winch mounts sold separately so customers can get exactly what they want. Hand lift kit sold separately -- customers don't pay for equipment they won't use with an electric lift. Winch mount kits accept Warn, Ramsey and Superwinch winches; come complete with roller fairlead. WHAT TO ORDER: Plow Blade: Choose one of any size Standard Blade or Country Blade. Universal Extended Lift Push Tube: Part No. 51-4293. Blade Lift System: **Electric Lift Part No. 51-5893 INCLUDED ITEMS:. (1) 1/2 in. x 3/4 in. Shoulder bolt (1) 1/2 in. Flat washer (1) 3/8 in. Nylock nut (2) Blade hinge adjusting stops (2) 3/8 in. x 1 in. Hex Head bolts (2) 3/8 in. Nylock nuts (1) Bottom mount (2) 3/8 in. x 2-1/2 in. Wire loop pins (2) 1/2 in. x 1-1/2 in. Hex head bolts (2) 1/2 in. x 1 in. Hex head bolts (4) 1/2 in. Nylock nuts (1) Instruction sheet.
1 on Hand
More Info/Options for Moose Extended Lift Bottom Mount for 1993-03 Gator 4x2/6x4/Diesel 514289
|
|
|
|
$107.95
Moose Extended Lift Bottom Mount 514495
Dennis Kirk Part #: 514495
Moose Extended Lift Bottom Mount 514495: Quick-connect mounting hardware allows easy hook-up and fast removal. Universal, heavy-duty push tube withstands the roughest use. Blade swivel constructed of 3/8 in. steel with 20 in. blade attaching points for greater blade support and strength. Open swivel eliminates dirt and snow build-up in the pivot point. Five blade swivel positions and four-way blade pitch adjustment. ATV plow bottom-mount kits include all necessary hardware to attach universal push tube and plow to your ATV. Winch mounts sold separately so customers can get exactly what they want. Hand lift kit sold separately -- customers don't pay for equipment they won't use with an electric lift. Winch mount kits accept Warn, Ramsey and Superwinch winches; come complete with roller fairlead. WHAT TO ORDER: Plow Blade: Choose one of any size Standard Blade or Country Blade. Universal Extended Lift Push Tube: Part No. 51-4293. Moose Blade Lift System: Choose ONE of the following: **Electric Lift Part No. 51-5893 **Winch Mount search by make, model, and year INCLUDED ITEMS:. (1) 3/8 in. Nylock nuts (1) 1/2 in. x 3/4 in. Shoulder bolt (1) 1/2 in. Flat washer (2) Blade hinge adjusting stops (2) 3/8 in. x 1 in. Hex Head bolts (2) 3/8 in. Nylock nuts (1) Bottom mount (2) 3/8 in. x 2-1/2 in. Wire loop pins (4) 5/16 in. x 1-1/4 I n. x 2-1/4 in. U-bolts (8) 5/16 in. Flat washers (8) 5/16 in. Nylock nuts (1) Instruction sheet.
2 on Hand
More Info/Options for Moose Extended Lift Bottom Mount 514495
|
|
|
|
$59.95
Moose Extended Lift Bottom Mount 514372
Dennis Kirk Part #: 514372
Moose Extended Lift Bottom Mount 514372: Quick-connect mounting hardware allows easy hook-up and fast removal. Universal, heavy-duty push tube withstands the roughest use. Blade swivel constructed of 3/8 in. steel with 20 in. blade attaching points for greater blade support and strength. Open swivel eliminates dirt and snow build-up in the pivot point. Five blade swivel positions and four-way blade pitch adjustment. ATV plow bottom-mount kits include all necessary hardware to attach universal push tube and plow to your ATV. Winch mounts sold separately so customers can get exactly what they want. Hand lift kit sold separately -- customers don't pay for equipment they won't use with an electric lift. Winch mount kits accept Warn, Ramsey and Superwinch winches; come complete with roller fairlead. WHAT TO ORDER: Plow Blade: Choose one of any size Standard Blade or Country Blade. Universal Extended Lift Push Tube: Part No. 51-4293. Moose Blade Lift System: Choose ONE of the following: **Electric Lift Part No. 51-5893 **Winch Mount search by make, model, and year INCLUDED ITEMS:. (1) 3/8 in. Nylock nuts (1) 1/2 in. x 3/4 in. Shoulder bolt (1) 1/2 in. Flat washer (2) Blade hinge adjusting stops (2) 3/8 in. x 1 in. Hex Head bolts (2) 3/8 in. Nylock nuts (1) Bottom mount (2) 3/8 in. x 2-1/2 in. Wire loop pins (4) 5/16 in. x 1-1/4 I n. x 2-1/4 in. U-bolts (8) 5/16 in. Flat washers (8) 5/16 in. Nylock nuts (1) Instruction sheet.
Expected Soon
More Info/Options for Moose Extended Lift Bottom Mount 514372
|
|
|
|
