|
|
|
|
$152.99
Superwinch Freedom Switch Kit 514865
Dennis Kirk Part #: 514865
Superwinch Freedom Switch Kit 514865: Manufacturer part # 06212 - Superwinch products are the winches trusted by professionals and weekenders alike for everything from racing to recovery, boating to off-roading. Instant on and off for immediate control -- no delay. Signal recognition up to 150 ft. Compact shielded antenna makes remote mounting simple. Plug and play components ensure quick installation. Sealed tough and tight for all conditions. For Superwinch winches ATV1800, ATV2300, and ATV3000. INCLUDED ITEMS . (1) Power distribution module (2) Remote transmitters (1) Antenna (1) Wiring harness (1) Instruction sheet. 06212
1 on Hand
More Info/Options for Superwinch Freedom Switch Kit 514865
|
|
|
|
$22.95
Moose Plow Markers 512522
Dennis Kirk Part #: 512522
Moose Plow Markers 512522: Clearly marks plow edges for increased visibility and safety. Hard rubber construction for durability. Sold in pairs. INSTRUCTION:. 1. Center punch a mark on each side of the plow blade 1 in. in from the side, and 1 in. in from the front of the blade 2. Using a 5/16 in. bit, drill the holes in the blade for the markers 3. Install the plow markers and hardware per illustration, adjust the markers to the desired position and tighten securely 4. If a plow flap has been installed, then use the outside plow flap mounting holes, drill to size and install the plow. INCLUDED ITEMS:. , (2) plow markers, (2) mounting brackets, (2) 5/16 in. x 3/4 in. hex bolts, (2) 5/16 in. x 1 in. hex bolts, (2) 5/16 in. Lock washers, (2) 5/16 in. Nyloc nuts, (4) 5/16 in. Flat washers.
10+ on hand
More Info/Options for Moose Plow Markers 512522
|
|
|
|
$75.99
Warn Multi-Mount Winch Carrier 515731
Dennis Kirk Part #: 515731
Warn Multi-Mount Winch Carrier 515731: Manufacturer part # 70925 - Mount your new 2.5, 3.0, RT/XT25, or RT/XT30 WARN winch(sold separately) to this carrier; the carrier fits into the multi-mount receiver (sold separately). To move the winch, simply unplug the Quick Connect power leads (sold separately), pull the hitch pin and plug the winch into its new location. , , WHAT TO ORDER: Warn Winch: Your choice of 2.5, 3.0, RT/XT25, or RT/XT40 Warn Quick Connect Wiring Kit: Part No. 51-5732 Warn Mounting Receiver Kit: To be searched by make, model, and year. 70925
1 on Hand
More Info/Options for Warn Multi-Mount Winch Carrier 515731
|
|
|
|
$56.95
Moose Side Shield for Moose Utility Plows 512374
Dennis Kirk Part #: 512374
Moose Side Shield for Moose Utility Plows 512374: Greatly reduces the amount of overflowing snow or dirt when used on the forward end of an angled Moose Utility or Cycle Country plow blade. A side shield on both ends of a straight blade contains even more plowed material. Easy to install, constructed from sturdy, 11-gauge steel. Measures 14 1/2" H x 8" W. Available in black only. Requires some drilling for installation. INCLUDED ITEMS:. (1) Shield 1/4 in. thick (2) 3/8 in. x 1 in. Hex head bolts (2) 3/8 in. Flat washers (1) Instruction sheet.
4 on Hand
More Info/Options for Moose Side Shield for Moose Utility Plows 512374
|
|
|
|
|
|
|
|
|
|
$59.95
Moose Extended Lift Bottom Mount 515039
Dennis Kirk Part #: 515039
Moose Extended Lift Bottom Mount 515039: Quick-connect mounting hardware allows easy hook-up and fast removal. Universal, heavy-duty push tube withstands the roughest use. Blade swivel constructed of 3/8 in. steel with 20 in. blade attaching points for greater blade support and strength. Open swivel eliminates dirt and snow build-up in the pivot point. Five blade swivel positions and four-way blade pitch adjustment. ATV plow bottom-mount kits include all necessary hardware to attach universal push tube and plow to your ATV. Winch mounts sold separately so customers can get exactly what they want. Hand lift kit sold separately -- customers don't pay for equipment they won't use with an electric lift. Winch mount kits accept Warn, Ramsey and Superwinch winches; come complete with roller fairlead. WHAT TO ORDER: Plow Blade: Choose one of any size Standard Blade or Country Blade. Universal Extended Lift Push Tube: Part No. 51-4355. Blade Lift System: Choose ONE of the following: **Universal Manual Hand Lift Part No. 51-4356 **E-Z Lift Part No. 51-2810 **Winch Mount To be searched by make, model, and year **Electric Lift Part No. 51-5893.
4 on Hand
More Info/Options for Moose Extended Lift Bottom Mount 515039
|
|
|
|
$67.95
Moose Electric Lift Relay Harness 514153
Dennis Kirk Part #: 514153
Moose Electric Lift Relay Harness 514153: Designed with a dual purpose: to lift the plow without manual effort and leave the winch for what it was designed to do. Will operate only with the ignition on and comes standard with a thermal limiting switch that eliminates the possibility of damage to the ATV, plow or actuator. A new motor delivers increased performance: single-line pulling capacity is rated at 300 lbs., more than enough power to reliably lift the heaviest blade. New cable termination strap -- universal design for easy on and off; eliminates the need for a pulley bracket. A handlebar-mounted switch can be operated without removing your hand from the grip; this switch is built to survive rain, cold, mud and other contaminants and still perform. Easy-to-install kit includes a handlebar switch, wiring harness,cable termination strap and all necessary hardware..
1 on Hand
More Info/Options for Moose Electric Lift Relay Harness 514153
|
|
|
|
|
|
$56.99
Warn Replacement Remote Control for 3.0ci, 2.5ci, RT/XT30, and RT/XT25 513639
Dennis Kirk Part #: 513639
Warn Replacement Remote Control for 3.0ci, 2.5ci, RT/XT30, and RT/XT25 513639: Manufacturer part # 64849 - Replacement remote control for 3.0ci, 2.5ci, RT/XT30, and RT/XT25 ATV winches. Does not include socket. INCLUDED ITEM:. (1) remote with cord and plug. 64849
1 on Hand
More Info/Options for Warn Replacement Remote Control for 3.0ci, 2.5ci, RT/XT30, and RT/XT25 513639
|
|
|
|
|
|
|
|
$161.99
Warn Bumper 513290
Dennis Kirk Part #: 513290
Warn Bumper 513290: Manufacturer part # 63098 - Durable steel bumpers are powder coated to resist corrosion. Contoured for a precision fit. Designed to fully integrate with all Warn ATV products. For use with sotck bumper/rack. Lights not included; order part number 22325. Must use a winch mounting plate to attach winch.. 63098
Expected Soon
More Info/Options for Warn Bumper 513290
|
|
|
|
$94.99
Warn Winching Accessory Kit 514867
Dennis Kirk Part #: 514867
Warn Winching Accessory Kit 514867: Manufacturer part # 69222 - Essential gear for getting the most out of your WARN ATV winch. Includes two shackles, snatch block and two 1 in. x 8 ft. tree trunk protectors. Stores in its own black heavyweight Cordurar nylon soft case. INCLUDED ITEMS: . (2) Shackles (2) Snatch blocks (2) 1 in. x 8 in. (25.4mm x 2.4m) Tree trunk protectors (1) Carrying case. 69222
6 on Hand
More Info/Options for Warn Winching Accessory Kit 514867
|
|
|
|
$123.99
Warn A2000 to 2.5ci Upgrade Kit 513633
Dennis Kirk Part #: 513633
Warn A2000 to 2.5ci Upgrade Kit 513633: Manufacturer part # 63990 - Converts A2000 to 2.5ci. Kits let you convert your A2000 to WARN 2.5ci specifications. Kit comes with the contactor, Express Install wiring and mini-rocker switch control. INCLUDED ITEMS:. (1) Black lead wire (1) Red lead wire (1) Blue lead wire (1) Yellow lead wire (1) Contactor (1) Mini-rocker switch with lead wires (1) Switch mounting plate (1) 1-3/4 in. x 1/2 in. Black oval mounting plate (1) 3/16 in. x 5/8 in. Black socket head allen bolt (1) Blue quick connector (2) Handlebar half clamps (2) 3/16 in. x 1 in. Black socket head allen bolts (2)3/16 in. x 1-1/2 in. Black socket head allen bolts (2) 1/8 in. x 1/4 in. Black phillips screws (2) 1/8 in. Lock washers (2) 3/16 in. Lock washers (3) 3/16 in. nylock nuts (4) 5/16 in. x 1 in. Hex head bolts (4) 5/16 in. Lock washers (4) 1/4 in. x 1 in. Hex head bolts (4) 1/4 in. Lock washers (4) 1/4 in. Nylock nuts (6) Black plastic covers (12) 12 in. cable ties (1) Instruction sheet. 63990
6 on Hand
More Info/Options for Warn A2000 to 2.5ci Upgrade Kit 513633
|
|
|
|
|
|
$28.95
Moose Push Tube Hitch 515374
Dennis Kirk Part #: 515374
Moose Push Tube Hitch 515374: Manufacturer part # 1225 - Use your ATV to move your boat or snowmobile trailer. Durable 7-gauge powder-coated steel mount attaches to Mooses universal push tube (plow mount and push tube sold separately). Top of the hitch is designed with an angle to make trailering level. Ball sold separately.. 1225
1 on Hand
More Info/Options for Moose Push Tube Hitch 515374
|
|
|
|
$189.99
Warn Bumper 515066
Dennis Kirk Part #: 515066
Warn Bumper 515066: Manufacturer part # 68573 - Durable steel bumpers are powder coated to resist corrosion. Contoured for a precision fit. Designed to fully integrate with all Warn ATV products.. 68573
1 on Hand
More Info/Options for Warn Bumper 515066
|
|
|
|
$29.95
Moose Roller Fairlead 512205
Dennis Kirk Part #: 512205
Moose Roller Fairlead 512205: Reduces cable wear, especially on sharp-angle pulls. This will fit all of the moose winch mount plastes and any others with a 4 7/8 in. C-to-C mounting. INCLUDED ITEMS:. (1) Roller fairlead (2) 5/16 in.-18 x 3/4 in. hex head bolts (2) 5/16 in. nylock nuts No Instruction sheet.
10+ on hand
More Info/Options for Moose Roller Fairlead 512205
|
|
|
|
|
|
|
|
|
|
$38.99
Warn Neoprene Winch Cover Kit 515767
Dennis Kirk Part #: 515767
Warn Neoprene Winch Cover Kit 515767: Manufacturer part # 71975 - Protects 1.5 winch from the elements. Includes neoprene cover and 1" x 8" nylon strap. Inside mesh pocket stores the strap when not in use. Winch sold separately.. 71975
| |
