Home  >  Moose 50 in, Moose 60 in, Moose 72 in, Moose Rubber Flap
Browse Categories
Categories
Catalogs

Moose 50 in, Moose 60 in, Moose 72 in, Moose Rubber Flap

Warn Replacement Mini-Rocker Control Switch for 3.0ci, 2.5ci, RT/XT30, and RT/XT25 Winches 513637
$45.99 Warn Replacement Mini-Rocker Control Switch for 3.0ci, 2.5ci, RT/XT30, and RT/XT25 Winches 513637
Dennis Kirk Part #: 513637
Warn Replacement Mini-Rocker Control Switch for 3.0ci, 2.5ci, RT/XT30, and RT/XT25 Winches 513637: Manufacturer part # 64851 - Replacement mini-rocker control switch for 3.0ci, 2.5ci, RT/XT30 and RT/XT25 winches. Includes switch and mounting hardware. INCLUDED ITEMS:. (1) Rocker switch with wire harness (1) Blue connector (1) Switch mount (1) 1-3/4 in. L x 1/2 in. W black oval mountin plate (1) 3/16 in. x 5/8 in. socket head allen bolt (2) Half clamps (2) 3/16 in. x 1-1/2 in. socket head allen bolts (2) 3/16 in. x 1 in. socket head allen bolts (2) 3/16 in. lock washers (2) 1/8 in. x 1/4 in. phillip screws (2) 1/8 in. lock washers (3) 3/16 in. nylock nuts No instruction sheet. 64851


10+ on hand


More Info/Options for Warn Replacement Mini-Rocker Control Switch for 3.0ci, 2.5ci, RT/XT30, and RT/XT25 Winches 513637
Warn Snatch Block 51310
$54.99 Warn Snatch Block 51310
Dennis Kirk Part #: 51310
Warn Snatch Block 51310: Manufacturer part # 28881 - Double your pulling power and make angled pulls easier. Snatch block works with cables up to 7/32". NOTE: No instruction included. 28881


1 on Hand


More Info/Options for Warn Snatch Block 51310
Moose Electric Lift Lower Mounting Pin Short 2 1/2 in. 514591
$2.95 Moose Electric Lift Lower Mounting Pin Short 2 1/2 in. 514591
Dennis Kirk Part #: 514591
Moose Electric Lift Lower Mounting Pin Short 2 1/2 in. 514591: Designed with a dual purpose: to lift the plow without manual effort and leave the winch for what it was designed to do. Will operate only with the ignition on and comes standard with a thermal limiting switch that eliminates the possibility of damage to the ATV, plow or actuator. A new motor delivers increased performance: single-line pulling capcity is rated at 300 lbs., more than enough power to reliably lift the heaviest blade. New cable termination strap -- universal design for easy on and off; eliminates the need for a pulley bracket. A handlebar-mounted switch can be operated without removing your hand from the grip; this switch is built to survive rain, cold, mud and other contaminants and still perform. Easy-to-install kit includes a handlebar switch, wiring harness,cable termination strap and all necessary hardware..


3 on Hand


More Info/Options for Moose Electric Lift Lower Mounting Pin Short 2 1/2 in. 514591
72 in. Moose Rubber Flap
$26.95 72 in. Moose Rubber Flap
Dennis Kirk Part #: 515828
72 in. Moose Rubber Flap: Helps keep snow from blowing back into your face while using Moose Utility plows..


2 on Hand


More Info/Options for 72 in. Moose Rubber Flap
Moose Heavy-Duty Blade Skids 512382
$19.95 Moose Heavy-Duty Blade Skids 512382
Dennis Kirk Part #: 512382
Moose Heavy-Duty Blade Skids 512382: Control working level of your blade. Extra-duty abrasive-resistant steel works longer than standard skid. Conversion kit includes skids, brackets and mounting hardware. , , This is the old style heavy-duty blade skid that threads onto the plow blade.


10+ on hand


More Info/Options for Moose Heavy-Duty Blade Skids 512382
Moose Heavy-Duty Wear Bar 515851
$27.95 Moose Heavy-Duty Wear Bar 515851
Dennis Kirk Part #: 515851
Moose Heavy-Duty Wear Bar 515851: Available in 3" heavy-duty design for Moose Utility and Cycle Country plows. 3" width provides additional wear. Wear bars are reversible for longer life..


1 on Hand


More Info/Options for Moose Heavy-Duty Wear Bar 515851
Moose Electric Lift Wire Rope 514513
$14.95 Moose Electric Lift Wire Rope 514513
Dennis Kirk Part #: 514513
Moose Electric Lift Wire Rope 514513: Designed with a dual purpose: to lift the plow without manual effort and leave the winch for what it was designed to do. Will operate only with the ignition on and comes standard with a thermal limiting switch that eliminates the possibility of damage to the ATV, plow or actuator. A new motor delivers increased performance: single-line pulling capacity is rated at 300 lbs., more than enough power to reliably lift the heaviest blade. New cable termination strap -- universal design for easy on and off; eliminates the need for a pulley bracket. A handlebar-mounted switch can be operated without removing your hand from the grip; this switch is built to survive rain, cold, mud and other contaminants and still perform. Easy-to-install kit includes a handlebar switch, wiring harness,cable termination strap and all necessary hardware..


1 on Hand


More Info/Options for Moose Electric Lift Wire Rope 514513
Moose Electric Lift Replacement Switch 516273
$47.95 Moose Electric Lift Replacement Switch 516273
Dennis Kirk Part #: 516273
Moose Electric Lift Replacement Switch 516273: No Further Information Available.


Expected Soon


More Info/Options for Moose Electric Lift Replacement Switch 516273
EK Grab A Winch Handle Strap 407567
$10.99 EK Grab A Winch Handle Strap 407567
Dennis Kirk Part #: 407567
EK Grab A Winch Handle Strap 407567: Provides a strong hold when retracting or recoiling your winch. Made from 1 1/8 in. W nylon webbing. Comes with a moto-style grip for added comfort and durability..


1 on Hand


More Info/Options for EK Grab A Winch Handle Strap 407567
Warn Bumper 513185
CLOSEOUT!
Was: $160.99
Now: $120.74

Warn Bumper 513185
Dennis Kirk Part #: 513185
Warn Bumper 513185: Manufacturer part # 62321 - Durable steel bumpers are powder coated to resist corrosion. Contoured for a precision fit. For use with sotck bumper/rack. Designed to fully integrate with all Warn ATV products.. 62321


1 on Hand


More Info/Options for Warn Bumper 513185
Moose 60 in. Cycle Country Blade Wear Bar 512387
$29.95 Moose 60 in. Cycle Country Blade Wear Bar 512387
Dennis Kirk Part #: 512387
Moose 60 in. Cycle Country Blade Wear Bar 512387: Available in 3" extra-duty design for M.U.D. and Cycle Country plow blades..


1 on Hand


More Info/Options for Moose 60 in. Cycle Country Blade Wear Bar 512387
Superwinch Remote Switch Kit 21223
$37.95 Superwinch Remote Switch Kit 21223
Dennis Kirk Part #: 21223
Superwinch Remote Switch Kit 21223: Manufacturer part # 1501B - Replacement part for EX-1, X1, X2, S2500 and S3500 Superwinch only. , , NOTE: . Switch is not included, must reuse original switch.. 1501B


3 on Hand


More Info/Options for Superwinch Remote Switch Kit 21223
Moose Side Shield for Cycle Country Plows 512375
$56.95 Moose Side Shield for Cycle Country Plows 512375
Dennis Kirk Part #: 512375
Moose Side Shield for Cycle Country Plows 512375: Greatly reduces the amount of overflowing snow or dirt when used on the forward end of an angled Moose Utility or Cycle Country plow blade. A side shield on both ends of a straight blade contains even more plowed material. Easy to install, constructed from sturdy, 11-gauge steel. Measures 14 1/2" H x 8" W. Requires some drilling for installation. INCLUDED ITEMS: . (1) Instruction sheet.


1 on Hand


More Info/Options for Moose Side Shield for Cycle Country Plows 512375
50 ft. Warn Synthetic Replacement Rope
$105.99 50 ft. Warn Synthetic Replacement Rope
Dennis Kirk Part #: 515728
50 ft. Warn Synthetic Replacement Rope: Manufacturer part # 72128 - Synthetic replacement rope for use with Warn 2.5CI, 3.0CI, RT/XT25 Series and RT/XT30 Series winches. Includes synthetic rope, rock guard sleeve and roller fairlead. 3/32" x 50 feet 3,000 pound weight rating Aluminum hub required Swaged loop end. 72128


8 on Hand


More Info/Options for 50 ft. Warn Synthetic Replacement Rope
Warn Winch Remote Transmitter 516104
$47.99 Warn Winch Remote Transmitter 516104
Dennis Kirk Part #: 516104
Warn Winch Remote Transmitter 516104: Replacement remote control for the WARN remote control system Part No. 516003.


1 on Hand


More Info/Options for Warn Winch Remote Transmitter 516104
Warn Replacement Power Interrupt Solenoid for A2000 615022
$28.99 Warn Replacement Power Interrupt Solenoid for A2000 615022
Dennis Kirk Part #: 615022
Warn Replacement Power Interrupt Solenoid for A2000 615022: Manufacturer part # 62871 - INCLUDED ITEM: . Instruction sheet. 62871


9 on Hand


More Info/Options for Warn Replacement Power Interrupt Solenoid for A2000 615022
Warn Quick Connect Wiring Kit for Multi-Mount Winch System 515732
$75.99 Warn Quick Connect Wiring Kit for Multi-Mount Winch System 515732
Dennis Kirk Part #: 515732
Warn Quick Connect Wiring Kit for Multi-Mount Winch System 515732: Manufacturer part # 70918 - 50A kit works for both front and back of vehicle. Includes 20 in. winch lead, 36 in. front battery lead and 96 inch rear battery lead. , , WHAT TO ORDER: . Warn Winch: Your choice of 2.5, 3.0, RT/XT25, RT/XT30, or RT/XT40 Winch Carrier: **For 1-1/4 in. Carrier order Part No. 51-5731 **For 2 in. Carrier order Part No. 51-6295 or 51-6296 depending on your needs Warn Mounting Receiver Kit: To be searched by make, model, and year. 70918


2 on Hand


More Info/Options for Warn Quick Connect Wiring Kit for Multi-Mount Winch System 515732
Moose Electric Lift Relay With Wiring 514512
$44.95 Moose Electric Lift Relay With Wiring 514512
Dennis Kirk Part #: 514512
Moose Electric Lift Relay With Wiring 514512: Designed with a dual purpose: to lift the plow without manual effort and leave the winch for what it was designed to do. Will operate only with the ignition on and comes standard with a thermal limiting switch that eliminates the possibility of damage to the ATV, plow or actuator. A new motor delivers increased performance: single-line pulling capacity is rated at 300 lbs., more than enough power to reliably lift the heaviest blade. New cable termination strap -- universal design for easy on and off; eliminates the need for a pulley bracket. A handlebar-mounted switch can be operated without removing your hand from the grip; this switch is built to survive rain, cold, mud and other contaminants and still perform. Easy-to-install kit includes a handlebar switch, wiring harness, cable termination strap and all necessary hardware..


1 on Hand


More Info/Options for Moose Electric Lift Relay With Wiring 514512
Moose ATV Winch 514514
$21.95 Moose ATV Winch 514514
Dennis Kirk Part #: 514514
Moose ATV Winch 514514: No Further Information Available.


1 on Hand


More Info/Options for Moose ATV Winch 514514
Moose Plow Light Mount Kit 211922
$29.95 Moose Plow Light Mount Kit 211922
Dennis Kirk Part #: 211922
Moose Plow Light Mount Kit 211922: Manufacturer part # 2569 - Light your way when plowing at night or in the early morning. Attach mount to the front rack of your ATV; use Moose halogen light kit PART NO. 21-996 (sold separately). Designed for long-lasting durability with a 1/4" steel base and 7-gauge steel light support arms.. 2569


2 on Hand


More Info/Options for Moose Plow Light Mount Kit 211922
Moose 50 in. Moose Utility Blade Wear Bar 512384
$25.95 Moose 50 in. Moose Utility Blade Wear Bar 512384
Dennis Kirk Part #: 512384
Moose 50 in. Moose Utility Blade Wear Bar 512384: Available in " extra-duty design for M.U.D. and Cycle Country plow blades..


3 on Hand


More Info/Options for Moose 50 in. Moose Utility Blade Wear Bar 512384
Warn Replacement Hook With Strap 514298
$14.99 Warn Replacement Hook With Strap 514298
Dennis Kirk Part #: 514298
Warn Replacement Hook With Strap 514298: Manufacturer part # 39557 - ATV hook features a safety latch. Hook strap included.. 39557


5 on Hand


More Info/Options for Warn Replacement Hook With Strap 514298
Moose Plow Blade Spring Kit 514349
$28.95 Moose Plow Blade Spring Kit 514349
Dennis Kirk Part #: 514349
Moose Plow Blade Spring Kit 514349: Replacement part for Moose Plows This comes with a pair of Springs and eyebolts, For blade stop kit (Two Flat Plates with a Hole, Two Bolts and Two Nuts) order Part No. 51-4350.


Expected Soon


More Info/Options for Moose Plow Blade Spring Kit 514349
Warn Remote Control Upgrade Kit 513638
$69.99 Warn Remote Control Upgrade Kit 513638
Dennis Kirk Part #: 513638
Warn Remote Control Upgrade Kit 513638: Manufacturer part # 64259 - For Warn 2.5ci and RT/XT 25 winches. Complete kit includes remote control, socket, and Express Install wiring. INCLUDED ITEMS:. (1) Remote switch with lead wires (1) Blue connector (2) 3/16 in. x 3/4 in. Hex head bolts (2) 3/16 in. Flat washers (2) 3/16 in. Nuts (1) Instruction sheet. 64259


3 on Hand


More Info/Options for Warn Remote Control Upgrade Kit 513638
Warn Remote Control System 516003
$151.99 Warn Remote Control System 516003
Dennis Kirk Part #: 516003
Warn Remote Control System 516003: Manufacturer part # 74500 - Convert your WARN winch to remote-controlled operation. Works with any WARN powersports winch with a contactor and a mini-rocker control switch. Two color LED indicate when system is on and when system has begun winching. Includes weather-proof wireless remote control, receiver with built-in antenna, handlebar-mounted holster for remote. Also includes long-lasting lithium battery. Auto shut-off to preserve battery. 50 foot range. Included Items:. , 1. (1) Wireless receiver. , 2. (1) Wireless transmitter. , 3. (1) Wiring harness. , 4. (1) Holster assembly. , 5. (1) Hardware kit. NOTE: Replacement transmitter use part number 516104. 74500


2 on Hand


More Info/Options for Warn Remote Control System 516003
Moose Winch Mount 516359