|
|
$339.99
Dynojet Ignition Module 201402
Dennis Kirk Part #: 201402
Dynojet Ignition Module 201402: Manufacturer part # 618 - Tune each cylinder individually or advance or retard the ignition curve based on throttle position with this ignition module. Through a built-in expansion port link you can connect this ignition module to PCIII USB. Without splicing or cutting wires, connect the ignition coils through an intermediate harness connection or directly to the coil. Flexible timing adjustments are provided from the direct coil technology.. 618
1 on Hand
More Info/Options for Dynojet Ignition Module 201402
|
|
|
|
$339.99
Dynojet Ignition Module 201397
Dennis Kirk Part #: 201397
Dynojet Ignition Module 201397: Manufacturer part # 612 - Tune each cylinder individually or advance or retard the ignition curve based on throttle position with this ignition module. Through a built-in expansion port link you can connect this ignition module to PCIII USB. Without splicing or cutting wires, connect the ignition coils through an intermediate harness connection or directly to the coil. Flexible timing adjustments are provided from the direct coil technology.. 612
1 on Hand
More Info/Options for Dynojet Ignition Module 201397
|
|
|
|
$339.99
Dynojet Ignition Module 201390
Dennis Kirk Part #: 201390
Dynojet Ignition Module 201390: Manufacturer part # 605 - Tune each cylinder individually or advance or retard the ignition curve based on throttle position with this ignition module. Through a built-in expansion port link you can connect this ignition module to PCIII USB. Without splicing or cutting wires, connect the ignition coils through an intermediate harness connection or directly to the coil. Flexible timing adjustments are provided from the direct coil technology.. 605
1 on Hand
More Info/Options for Dynojet Ignition Module 201390
|
|
|
|
$339.99
Dynojet Ignition Module 208641
Dennis Kirk Part #: 208641
Dynojet Ignition Module 208641: Tune each cylinder individually or advance or retard the ignition curve based on throttle position with this ignition module. Through a built-in expansion port link you can connect this ignition module to PCIII USB. Without splicing or cutting wires, connect the ignition coils through an intermediate harness connection or directly to the coil. Flexible timing adjustments are provided from the direct coil technology..
1 on Hand
More Info/Options for Dynojet Ignition Module 208641
|
|
|
|
$339.99
Dynojet Ignition Module 208630
Dennis Kirk Part #: 208630
Dynojet Ignition Module 208630: Tune each cylinder individually or advance or retard the ignition curve based on throttle position with this ignition module. Through a built-in expansion port link you can connect this ignition module to PCIII USB. Without splicing or cutting wires, connect the ignition coils through an intermediate harness connection or directly to the coil. Flexible timing adjustments are provided from the direct coil technology..
Expected Soon
More Info/Options for Dynojet Ignition Module 208630
|
|
|
|
$339.99
Dynojet Ignition Module 208633
Dennis Kirk Part #: 208633
Dynojet Ignition Module 208633: Tune each cylinder individually or advance or retard the ignition curve based on throttle position with this ignition module. Through a built-in expansion port link you can connect this ignition module to PCIII USB. Without splicing or cutting wires, connect the ignition coils through an intermediate harness connection or directly to the coil. Flexible timing adjustments are provided from the direct coil technology..
1 on Hand
More Info/Options for Dynojet Ignition Module 208633
|
|
|
|
$339.99
Dynojet Ignition Module 201388
Dennis Kirk Part #: 201388
Dynojet Ignition Module 201388: Manufacturer part # 603 - Tune each cylinder individually or advance or retard the ignition curve based on throttle position with this ignition module. Through a built-in expansion port link you can connect this ignition module to PCIII USB. Without splicing or cutting wires, connect the ignition coils through an intermediate harness connection or directly to the coil. Flexible timing adjustments are provided from the direct coil technology.. 603
2 on Hand
More Info/Options for Dynojet Ignition Module 201388
|
|
|
|
$339.99
Dynojet Ignition Module 201396
Dennis Kirk Part #: 201396
Dynojet Ignition Module 201396: Manufacturer part # 611 - Tune each cylinder individually or advance or retard the ignition curve based on throttle position with this ignition module. Through a built-in expansion port link you can connect this ignition module to PCIII USB. Without splicing or cutting wires, connect the ignition coils through an intermediate harness connection or directly to the coil. Flexible timing adjustments are provided from the direct coil technology.. 611
1 on Hand
More Info/Options for Dynojet Ignition Module 201396
|
|
|
|
$81.99
Dynojet Stage 1 Jet Kit 171850
Dennis Kirk Part #: 171850
Dynojet Stage 1 Jet Kit 171850: Manufacturer part # 3143 - Specifically for motorcycles with stock engines using stock airboxes, air filters and stock or aftermarket exhaust systems. Adjust to allow for the use of well-designed aftermarket exhaust systems and stock replacement air filters. Get better throttle response and driveability. Expect power increases of approximately 5 percent throughout the power range.. 3143
4 on Hand
More Info/Options for Dynojet Stage 1 Jet Kit 171850
|
|
|
|
$81.99
Dynojet Stage 1 Jet Kit 172491
Dennis Kirk Part #: 172491
Dynojet Stage 1 Jet Kit 172491: Manufacturer part # 1182 - Specifically for motorcycles with stock engines using stock airboxes, air filters and stock or aftermarket exhaust systems. Adjust to allow for the use of well-designed aftermarket exhaust systems and stock replacement air filters. Get better throttle response and driveability. Expect power increases of approximately 5 percent throughout the power range.. 1182
4 on Hand
More Info/Options for Dynojet Stage 1 Jet Kit 172491
|
|
|
|
$61.99
Dynojet Stage 1 Jet Kit 172540
Dennis Kirk Part #: 172540
Dynojet Stage 1 Jet Kit 172540: Manufacturer part # 1198 - Specifically for motorcycles with stock engines using stock airboxes, air filters and stock or aftermarket exhaust systems. Adjust to allow for the use of well-designed aftermarket exhaust systems and stock replacement air filters. Get better throttle response and driveability. Expect power increases of approximately 5 percent throughout the power range.. 1198
7 on Hand
More Info/Options for Dynojet Stage 1 Jet Kit 172540
|
|
|
|
$119.99
Dynojet Stage 1 Jet Kit 171833
Dennis Kirk Part #: 171833
Dynojet Stage 1 Jet Kit 171833: Manufacturer part # 3122 - Specifically for motorcycles with stock engines using stock airboxes, air filters and stock or aftermarket exhaust systems. Adjust to allow for the use of well-designed aftermarket exhaust systems and stock replacement air filters. Get better throttle response and driveability. Expect power increases of approximately 5 percent throughout the power range.. 3122
2 on Hand
More Info/Options for Dynojet Stage 1 Jet Kit 171833
|
|
|
|
$119.99
Dynojet Stage 1 Jet Kit 172541
Dennis Kirk Part #: 172541
Dynojet Stage 1 Jet Kit 172541: Manufacturer part # 1199 - Specifically for motorcycles with stock engines using stock airboxes, air filters and stock or aftermarket exhaust systems. Adjust to allow for the use of well-designed aftermarket exhaust systems and stock replacement air filters. Get better throttle response and driveability. Expect power increases of approximately 5 percent throughout the power range.. 1199
1 on Hand
More Info/Options for Dynojet Stage 1 Jet Kit 172541
|
|
|
|
$119.99
Dynojet Stage 1 Jet Kit 171693
Dennis Kirk Part #: 171693
Dynojet Stage 1 Jet Kit 171693: Manufacturer part # 1128 - Specifically for motorcycles with stock engines using stock airboxes, air filters and stock or aftermarket exhaust systems. Adjust to allow for the use of well-designed aftermarket exhaust systems and stock replacement air filters. Get better throttle response and driveability. Expect power increases of approximately 5 percent throughout the power range.. 1128
1 on Hand
More Info/Options for Dynojet Stage 1 Jet Kit 171693
|
|
|
|
$119.99
Dynojet Stage 1 Jet Kit 171752
Dennis Kirk Part #: 171752
Dynojet Stage 1 Jet Kit 171752: Manufacturer part # 2121 - Specifically for motorcycles with stock engines using stock airboxes, air filters and stock or aftermarket exhaust systems. Adjust to allow for the use of well-designed aftermarket exhaust systems and stock replacement air filters. Get better throttle response and driveability. Expect power increases of approximately 5 percent throughout the power range.. 2121
1 on Hand
More Info/Options for Dynojet Stage 1 Jet Kit 171752
|
|
|
|
$92.99
Dynojet Stage 1 Jet Kit 171959
Dennis Kirk Part #: 171959
Dynojet Stage 1 Jet Kit 171959: Manufacturer part # 8101 - Specifically for motorcycles with stock engines using stock airboxes, air filters and stock or aftermarket exhaust systems. Adjust to allow for the use of well-designed aftermarket exhaust systems and stock replacement air filters. Get better throttle response and driveability. Expect power increases of approximately 5 percent throughout the power range.. 8101
1 on Hand
More Info/Options for Dynojet Stage 1 Jet Kit 171959
|
|
|
|
$133.99
Dynojet Stage 1 Jet Kit 171684
Dennis Kirk Part #: 171684
Dynojet Stage 1 Jet Kit 171684: Manufacturer part # 1118 - Specifically for motorcycles with stock engines using stock airboxes, air filters and stock or aftermarket exhaust systems. Adjust to allow for the use of well-designed aftermarket exhaust systems and stock replacement air filters. Get better throttle response and driveability. Expect power increases of approximately 5 percent throughout the power range.. 1118
1 on Hand
More Info/Options for Dynojet Stage 1 Jet Kit 171684
|
|
|
|
$81.99
Dynojet Stage 1 Jet Kit 171896
Dennis Kirk Part #: 171896
Dynojet Stage 1 Jet Kit 171896: Manufacturer part # 4114 - Specifically for motorcycles with stock engines using stock airboxes, air filters and stock or aftermarket exhaust systems. Adjust to allow for the use of well-designed aftermarket exhaust systems and stock replacement air filters. Get better throttle response and driveability. Expect power increases of approximately 5 percent throughout the power range.. 4114
Expected Soon
More Info/Options for Dynojet Stage 1 Jet Kit 171896
|
|
|
|
$332.99
Dynojet Power Commander III USB 208643
Dennis Kirk Part #: 208643
Dynojet Power Commander III USB 208643: USB (Universal Serial Bus) port provides an instant and automatic connection to the Power Commander Control Center software; simply power up the unit and connect the PCIII USB to the computer with the supplied cable. Provides precise information for fine-tuning a fuel-injected snowmobile when changing an air filter, installing a new exhaust system or doing additional engine performance modifications. Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock; Dynojet continuously maps new calibrations for each snowmobile for downloading at their web site (www.powercommander.com). If you do not have a computer, you can change the settings with three touch buttons on the faceplate. OEM-style wiring connectors with improved harness protection are supplied; no wiring modifications required. Includes easy-to-follow instructions. Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment. Features an expansion port for future add-on modules from Dynojet. Software is compatible with Windows 98SE/ME/2000/XP; opens all maps with .djm extension. USB special cable and 9V battery power adapter are included. Made in the U.S.A...
1 on Hand
More Info/Options for Dynojet Power Commander III USB 208643
|
|
|
|
$332.99
Dynojet Power Commander III USB 202403
Dennis Kirk Part #: 202403
Dynojet Power Commander III USB 202403: USB (Universal Serial Bus) port provides an instant and automatic connection to the Power Commander Control Center software; simply power up the unit and connect the PCIII USB to the computer with the supplied cable. Provides precise information for fine-tuning a fuel-injected snowmobile when changing an air filter, installing a new exhaust system or doing additional engine performance modifications. Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock; Dynojet continuously maps new calibrations for each snowmobile for downloading at their web site (www.powercommander.com). If you do not have a computer, you can change the settings with three touch buttons on the faceplate. OEM-style wiring connectors with improved harness protection are supplied; no wiring modifications required. Includes easy-to-follow instructions. Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment. Features an expansion port for future add-on modules from Dynojet. Software is compatible with Windows 98SE/ME/2000/XP; opens all maps with .djm extension. USB special cable and 9V battery power adapter are included. Made in the U.S.A...
3 on Hand
More Info/Options for Dynojet Power Commander III USB 202403
|
|
|
|
$332.99
Dynojet Power Commander III USB 208654
Dennis Kirk Part #: 208654
Dynojet Power Commander III USB 208654: USB (Universal Serial Bus) port provides an instant and automatic connection to the Power Commander Control Center software; simply power up the unit and connect the PCIII USB to the computer with the supplied cable. Provides precise information for fine-tuning a fuel-injected snowmobile when changing an air filter, installing a new exhaust system or doing additional engine performance modifications. Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock; Dynojet continuously maps new calibrations for each snowmobile for downloading at their web site (www.powercommander.com). If you do not have a computer, you can change the settings with three touch buttons on the faceplate. OEM-style wiring connectors with improved harness protection are supplied; no wiring modifications required. Includes easy-to-follow instructions. Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment. Features an expansion port for future add-on modules from Dynojet. Software is compatible with Windows 98SE/ME/2000/XP; opens all maps with .djm extension. USB special cable and 9V battery power adapter are included. Made in the U.S.A...
2 on Hand
More Info/Options for Dynojet Power Commander III USB 208654
|
|
|
|
$332.99
Dynojet Power Commander III USB 202212
Dennis Kirk Part #: 202212
Dynojet Power Commander III USB 202212: USB (Universal Serial Bus) port provides an instant and automatic connection to the Power Commander Control Center software; simply power up the unit and connect the PCIII USB to the computer with the supplied cable. Provides precise information for fine-tuning a fuel-injected snowmobile when changing an air filter, installing a new exhaust system or doing additional engine performance modifications. Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock; Dynojet continuously maps new calibrations for each snowmobile for downloading at their web site (www.powercommander.com). If you do not have a computer, you can change the settings with three touch buttons on the faceplate. OEM-style wiring connectors with improved harness protection are supplied; no wiring modifications required. Includes easy-to-follow instructions. Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment. Features an expansion port for future add-on modules from Dynojet. Software is compatible with Windows 98SE/ME/2000/XP; opens all maps with .djm extension. USB special cable and 9V battery power adapter are included. Made in the U.S.A...
2 on Hand
More Info/Options for Dynojet Power Commander III USB 202212
|
|
|
|
$332.99
Dynojet Power Commander III USB 202211
Dennis Kirk Part #: 202211
Dynojet Power Commander III USB 202211: USB (Universal Serial Bus) port provides an instant and automatic connection to the Power Commander Control Center software; simply power up the unit and connect the PCIII USB to the computer with the supplied cable. Provides precise information for fine-tuning a fuel-injected snowmobile when changing an air filter, installing a new exhaust system or doing additional engine performance modifications. Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock; Dynojet continuously maps new calibrations for each snowmobile for downloading at their web site (www.powercommander.com). If you do not have a computer, you can change the settings with three touch buttons on the faceplate. OEM-style wiring connectors with improved harness protection are supplied; no wiring modifications required. Includes easy-to-follow instructions. Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment. Features an expansion port for future add-on modules from Dynojet. Software is compatible with Windows 98SE/ME/2000/XP; opens all maps with .djm extension. USB special cable and 9V battery power adapter are included. Made in the U.S.A...
2 on Hand
More Info/Options for Dynojet Power Commander III USB 202211
|
|
|
|
$332.99
Dynojet Power Commander III USB 208652
Dennis Kirk Part #: 208652
Dynojet Power Commander III USB 208652: USB (Universal Serial Bus) port provides an instant and automatic connection to the Power Commander Control Center software; simply power up the unit and connect the PCIII USB to the computer with the supplied cable. Provides precise information for fine-tuning a fuel-injected snowmobile when changing an air filter, installing a new exhaust system or doing additional engine performance modifications. Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock; Dynojet continuously maps new calibrations for each snowmobile for downloading at their web site (www.powercommander.com). If you do not have a computer, you can change the settings with three touch buttons on the faceplate. OEM-style wiring connectors with improved harness protection are supplied; no wiring modifications required. Includes easy-to-follow instructions. Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment. Features an expansion port | |
