Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

Drag Specialties Buffalo Drag Bar 300334, Drag Specialties 10 in

$90.99 Handlebars & Controls: IMS Pro Series Footpegs 2955114 Manufacturer: IMS Dennis Kirk Part #: 490434 IMS Pro Series Footpegs: Manufacturer part # 2955114 - Built to provide sure footing even in the worst conditions. Solid construction means these pegs will not fade when the riding gets tough.. 2955114 1 on hand More Info/Options for IMS Pro Series Footpegs 2955114

$90.99 Handlebars & Controls: IMS Pro-Series Footpegs 2955154 Manufacturer: IMS Dennis Kirk Part #: 490833 IMS Pro-Series Footpegs: Manufacturer part # 2955154 - Built to provide sure footing even in the worst conditions. Solid construction means these pegs will not fade when the riding gets tough.. 2955154 1 on hand More Info/Options for IMS Pro-Series Footpegs 2955154

$90.99 Handlebars & Controls: IMS Pro Series Footpegs 2955164 Manufacturer: IMS Dennis Kirk Part #: 490834 IMS Pro Series Footpegs: Manufacturer part # 2955164 - Built to provide sure footing even in the worst conditions. Solid construction means these pegs will not fade when the riding gets tough.. 2955164 1 on hand More Info/Options for IMS Pro Series Footpegs 2955164

$90.99 Handlebars & Controls: IMS Pro Series Footpegs 2955184 Manufacturer: IMS Dennis Kirk Part #: 492346 IMS Pro Series Footpegs: Manufacturer part # 2955184 - Built to provide sure footing even in the worst conditions. Solid construction means these pegs will not fade when the riding gets tough.. 2955184 1 on hand More Info/Options for IMS Pro Series Footpegs 2955184

$90.99 Handlebars & Controls: IMS Pro Series Footpegs 2973134 Manufacturer: IMS Dennis Kirk Part #: 490433 IMS Pro Series Footpegs: Manufacturer part # 2973134 - Built to provide sure footing even in the worst conditions. Solid construction means these pegs will not fade when the riding gets tough. NOTE: Not for the rear on the VN1500R Drifter. 2973134 2 on hand More Info/Options for IMS Pro Series Footpegs 2973134

$31.95 Handlebars & Controls: Moose CR Ratio Lever Assembly 2HAU007 Manufacturer: Moose Dennis Kirk Part #: 571110 Moose CR Ratio Lever Assembly: Manufacturer part # 2HAU007 - Direct bolt-on for most 2 stroke dirt bikes. Pull ratio matches Honda CR clutches. EZ-Adjust clutch perch. Teflon perch insert allows rotation upon impact. Polished cast aluminum construction. Consists of perch part number 571104 and lever part number 57725. 2HAU007 9 on hand More Info/Options for Moose CR Ratio Lever Assembly 2HAU007

$29.95 Handlebars & Controls: Moose Replacement Clutch Perch for Ultimate Clutch Lever Systems 2M1000 Manufacturer: Moose Dennis Kirk Part #: 572186 Moose Replacement Clutch Perch for Ultimate Clutch Lever Systems: Manufacturer part # 2M1000 - Adjustable leverage and easy pull offered by choice of two cable locating positions. Constructed of polished cast aluminum alloy. Lever features a needle bearing for smooth, consistent operation. Rubber guard that's removable keeps mechanisms clean and operational. Perch features a nylon insert so it can rotate during impact. Cable adjuster pivots for easy cable tension adjustments. Adjustable reach for personalized lever angle. , NOTE: For 2 -stroke applications. 2M1000 2 on hand More Info/Options for Moose Replacement Clutch Perch for Ultimate Clutch Lever Systems 2M1000

$25.95 Handlebars & Controls: Moose Replacement Fly Clutch Perch 2PRU007BK Manufacturer: Moose Dennis Kirk Part #: 571344 Moose Replacement Fly Clutch Perch: Manufacturer part # 2PRU007BK - For use with 2-stroke applications. Fits Fly Clutch Assembly part number 571343.. 2PRU007BK 4 on hand More Info/Options for Moose Replacement Fly Clutch Perch 2PRU007BK

$44.95 Handlebars & Controls: Moose Fly Clutch Assembly w/ Hot Start Lever 2PRU020 Manufacturer: Moose Dennis Kirk Part #: 573088 Moose Fly Clutch Assembly w/ Hot Start Lever: Manufacturer part # 2PRU020 - E-Z adjust assembly lets you adjust cable slack on the fly. Spring-loaded ball bearing adjuster allows for tension adjustment. Assembly includes high-quality press-fitted German needle bearing, CR-bend lever. Removable rubber boots keep mechanisms clean and operational. Nylon sleeve insert allows perch to rotate during impact. , Replacement Parts: , Fly Clutch Hot Start Lever: #572050, Fly Clutch Lever: #571346. 2PRU020 6 on hand More Info/Options for Moose Fly Clutch Assembly w/ Hot Start Lever 2PRU020

$44.95 Handlebars & Controls: Moose Fly Clutch Assembly w/ Hot Start Lever 2PRU025 Manufacturer: Moose Dennis Kirk Part #: 573089 Moose Fly Clutch Assembly w/ Hot Start Lever: Manufacturer part # 2PRU025 - E-Z adjust assembly lets you adjust cable slack on the fly. Spring-loaded ball bearing adjuster allows for tension adjustment. Assembly includes high-quality press-fitted German needle bearing, CR-bend lever. Removable rubber boots keep mechanisms clean and operational. Nylon sleeve insert allows perch to rotate during impact. , Replacement Parts: , Fly Clutch Hot Start Lever: #573089, Fly Clutch Lever: #571346. 2PRU025 Expected Soon More Info/Options for Moose Fly Clutch Assembly w/ Hot Start Lever 2PRU025

$7.95 Handlebars & Controls: Moose Replacement Switch for Heated Grips 30005 Manufacturer: Moose Dennis Kirk Part #: 595022 Moose Replacement Switch for Heated Grips: Manufacturer part # 30005 - Replacement switch for No-Adhesive Heated Grips part number 59-4410.. 30005 2 on hand More Info/Options for Moose Replacement Switch for Heated Grips 30005

$149.95 Handlebars & Controls: Drag Specialties Buffalo 6 in. T-Bar 300331 Manufacturer: Drag Specialties Dennis Kirk Part #: H59761 Drag Specialties Buffalo 6 in. T-Bar: Manufacturer part # 300331 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Billet gauge mounts for T-bars are available separately. T-Bars have 3-1/2 in. center-to-center mount holes. Made in the U.S.A.. Pictured on far right in photo. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter. 300331 3 on hand More Info/Options for Drag Specialties Buffalo 6 in. T-Bar 300331

$149.95 Handlebars & Controls: Drag Specialties Buffalo 8 in. T-Bar 300332 Manufacturer: Drag Specialties Dennis Kirk Part #: H59762 Drag Specialties Buffalo 8 in. T-Bar: Manufacturer part # 300332 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Billet gauge mounts for T-bars are available separately. T-Bars have 3-1/2 in. center-to-center mount holes. Made in the U.S.A.. Pictured in middle in photo NOTE: Brake side of handlebar is tapered for fitment of master cylinder assembly. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter. 300332 6 on hand More Info/Options for Drag Specialties Buffalo 8 in. T-Bar 300332

$149.95 Handlebars & Controls: Drag Specialties Buffalo 10 in. T-Bar 300333 Manufacturer: Drag Specialties Dennis Kirk Part #: H59763 Drag Specialties Buffalo 10 in. T-Bar: Manufacturer part # 300333 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Billet gauge mounts for T-bars are available separately. T-Bars have 3-1/2 in. center-to-center. Made in the U.S.A.. Is the bar on far left in photo. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter. 300333 2 on hand More Info/Options for Drag Specialties Buffalo 10 in. T-Bar 300333

$89.95 Handlebars & Controls: Drag Specialties Buffalo Drag Bar 300334 Manufacturer: Drag Specialties Dennis Kirk Part #: H59764 Drag Specialties Buffalo Drag Bar: Manufacturer part # 300334 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Billet gauge mounts for T-bars are available separately. Made in the U.S.A., , Bottom bar in photo, , 1 in. Diameter Clamping Width: 5-1/8 in., Inside Width of Knurling/Outside: 2-3/4 in. / 4-1/8 in.Knurled. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter. 300334 1 on hand More Info/Options for Drag Specialties Buffalo Drag Bar 300334

$89.95 Handlebars & Controls: Drag Specialties Buffalo Drag Bar for Springers 300335 Manufacturer: Drag Specialties Dennis Kirk Part #: H59765 Drag Specialties Buffalo Drag Bar for Springers: Manufacturer part # 300335 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Springer-style bars have the area between the risers increased to 1 1/4 in. for a smooth finished look; works with the OEM Springer risers and handlebar clamps. Billet gauge mounts for T-bars are available separately. 1 1/4 in. thick risers are also available to complete the Buffalo look (accepts 1 in. diameter handlebars only). Made in the U.S.A., , Top handlebar in photo, , 1" Diameter Clamping Width: 6-3/4 in., Inside Width of Knurling/outside: 4-1/16 in. / 5-7/16 in., Drilled for Internal Wiring: Yes. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter. 300335 1 on hand More Info/Options for Drag Specialties Buffalo Drag Bar for Springers 300335

$149.95 Handlebars & Controls: Drag Specialties Buffalo Classic Style Bar 300336 Manufacturer: Drag Specialties Dennis Kirk Part #: H59766 Drag Specialties Buffalo Classic Style Bar: Manufacturer part # 300336 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Billet gauge mounts for T-bars are available separately. 1 1/4 in. thick risers are also available to complete the Buffalo look (accepts 1 in. diameter handlebars only). Made in the U.S.A. Bottom bar in photo, , 1" Diameter Clamping Width: 5-1/8 in., Inside Width of Knurling/outside: 2-3/4 in. / 4-1/4 in., Drilled, Dimpled and Knurling NOTE: OEM-style handlebar clamps will not fit bars with 1 1/4 in. risers. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter. 300336 1 on hand More Info/Options for Drag Specialties Buffalo Classic Style Bar 300336

$149.95 Handlebars & Controls: Drag Specialties Buffalo Bagger Style Bar 300337 Manufacturer: Drag Specialties Dennis Kirk Part #: H59767 Drag Specialties Buffalo Bagger Style Bar: Manufacturer part # 300337 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Billet gauge mounts for T-bars are available separately. 1 1/4 in. thick risers are also available to complete the Buffalo look. Made in the U.S.A. Handlebar is second up from bottom in Photo, , 1" Diameter Clamping Width: 5-1/8 in., Inside Width of Knurling/outside: 2-3/4 in. / 4-1/4 in., Drilled and Knurling. , , NOTE: Not for use with stock risers and handlebar/gauge mount clamp on 883C/1200C models. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter, , Will not fit 08 Harley Davidson Touring Models (doesn't have notches in bar for electronic throttle). 300337 1 on hand More Info/Options for Drag Specialties Buffalo Bagger Style Bar 300337

$149.95 Handlebars & Controls: Drag Specialties Buffalo Bagger Style Bar for Road King 300338 Manufacturer: Drag Specialties Dennis Kirk Part #: H59768 Drag Specialties Buffalo Bagger Style Bar for Road King: Manufacturer part # 300338 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Billet gauge mounts for T-bars are available separately. 1 1/4 in. thick risers are also available to complete the Buffalo look. Made in the U.S.A. Bar is second down from top in photo, , 1 in. Diameter Clamping Width: 5-1/8 in., Inside Width of Knurling/Outside: 2-3/4 in. / 4-1/4 in., Drilled for Internal Wiring: Yes. , , Note: Hydraulic clutch master cylinder may not fit handlebars larger than 1 in. diameter, , Will not fit 08 Harley Davidson Touring Models (doesn't have notches in bar for electronic throttle). 300338 1 on hand More Info/Options for Drag Specialties Buffalo Bagger Style Bar for Road King 300338

$149.95 Handlebars & Controls: Drag Specialties Buffalo Bagger Style Bar for Springers 300339 Manufacturer: Drag Specialties Dennis Kirk Part #: H59769 Drag Specialties Buffalo Bagger Style Bar for Springers: Manufacturer part # 300339 - The ultimate 1 1/4 in. diameter handlebar -- designed for maximum comfort and brilliantly show-chromed. Drilled for internal wires; works with standard controls. Springer-style bars have the area betwee