Categories

• Helmets & Eyewear
• Apparel
• Exhaust
• Tires & Wheels
• Body & Windshield
• Rider & Machine Accessories
• Engine & Intake
• Drivetrain, Brakes & Suspension
• Controls & Handling
• Electrical & Lighting
• Chems, Lubes, Shop, Tools & Trailer

Catalogs

• Off Road
• Harley-Davidson
• Snowmobile
• Metric Bikes
• Watercraft

Drag Specialties 1 in, H59150 Drag Specialties 9

$89.95 Drag Specialties 1 in. Buckhorn Medium-Style Handlebar 595211 Dennis Kirk Part #: 595211 Drag Specialties 1 in. Buckhorn Medium-Style Handlebar 595211: Manufacturer part # 06010572 - Show-chrome finish for style. Seamless steel tubing construction. Wide variety of bends. Smooth unknurled style with dimples.. 06010572 4 on Hand More Info/Options for Drag Specialties 1 in. Buckhorn Medium-Style Handlebar 595211

$59.95 H20215 Drag Specialties Switch Housing Kit w/Hardware Dennis Kirk Part #: H20215 H20215 Drag Specialties Switch Housing Kit w/Hardware : Manufacturer part # DS290723 - Replacement switch housing kit for H571605, H571606 or H571607 Brake and Clutch controls.. DS290723 2 on Hand More Info/Options for H20215 Drag Specialties Switch Housing Kit w/Hardware

$174.95 H38068 Drag Specialties Cut-Down Hydraulic Clutch Master Cylinder Dennis Kirk Part #: H38068 H38068 Drag Specialties Cut-Down Hydraulic Clutch Master Cylinder: Manufacturer part # 53138 - Chrome die-cast housing with an 11/16 in. bore includes a chrome clamp half and lever. Matches cut-down brake master cylinders, H57-149, H57-148 and H57-147. Accepts a 10mm banjo bolt and DOT 5 brake fluid. Compatible with most clutch actuators. , NOTE: For replacement clutch lever use part number 573645. 53138 1 on Hand More Info/Options for H38068 Drag Specialties Cut-Down Hydraulic Clutch Master Cylinder

$12.95 Drag Specialties Dual Throttle Chrome Cable Guide 198432 Dennis Kirk Part #: 198432 Drag Specialties Dual Throttle Chrome Cable Guide 198432: Manufacturer part # 110270 - Low-cost alternative to billet clamps. Available for throttle/idle cable and clutch cable applications. Sold each.. 110270 6 on Hand More Info/Options for Drag Specialties Dual Throttle Chrome Cable Guide 198432

$39.95 Drag Specialties Smooth Mirror W/ Flame Stem 392556 Dennis Kirk Part #: 392556 Drag Specialties Smooth Mirror W/ Flame Stem 392556: Manufacturer part # 76443B4 - Aluminum construction. Chrome plated. Fit both right and left sides. Sold each. NOTE: For metric cruisers - mirror adapters Part No. 27-830(right hand thread) or Part No. 27-831 (Yamaha models with left hand thread on right hand mirror) are required. , , Dimensions , Mirror Width (glass only) 3 7/8 in., Mirror Height (glass only) 1 1/4 in., Stem Height 7 1/2 in., Stem Offset 4 in., Thread Size 5/16 in.-18 (right handed threads). 76443B4 7 on Hand More Info/Options for Drag Specialties Smooth Mirror W/ Flame Stem 392556

$12.95 H57056 Drag Specialties Chrome Clutch Lever Assembly Dennis Kirk Part #: H57056 H57056 Drag Specialties Chrome Clutch Lever Assembly: Manufacturer part # DS273894 - Complete clutch lever assembly includes cable end bushing to fit FL 68-71, XL 71-72 and FX models 71-72. Replaces OEM NO. 38608-68.. DS273894 3 on Hand More Info/Options for H57056 Drag Specialties Chrome Clutch Lever Assembly

$29.95 Drag Specialties Master Cylinder Rebuild Kit - 9/16 in. Bore 573336 Dennis Kirk Part #: 573336 Drag Specialties Master Cylinder Rebuild Kit - 9/16 in. Bore 573336: Manufacturer part # 144291 - For use with part number 573330.. 144291 1 on Hand More Info/Options for Drag Specialties Master Cylinder Rebuild Kit - 9/16 in. Bore 573336

$0.95 H20327 Drag Specialties Chrome Plugs for Handlebar Clamps Dennis Kirk Part #: H20327 H20327 Drag Specialties Chrome Plugs for Handlebar Clamps: Manufacturer part # DS290605 - The finishing touch on any chrome handlebar clamp - at such a low price. These plugs fit 1/4 in. Allen-Head Bolts, Top Diameter 5/8 in... DS290605 10+ on hand More Info/Options for H20327 Drag Specialties Chrome Plugs for Handlebar Clamps

$21.95 Drag Specialties Vinyl Throttle Cable 198664 Dennis Kirk Part #: 198664 Drag Specialties Vinyl Throttle Cable 198664: Top-quality, high-performance replacement throttle cables. Feature black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve. Winding of the outer housing lengthwise rather than spirally makes the cable bend in a more natural arc and eliminates spring and compression. Length given is the length of the outer housing only, excluding the elbow (Check your length) . This is an alternative length black throttle cable. , , NOTE:, Can be used for custom height/width handlebars for Big Twin models 1996-2008/XL models 1996-2006. 5 on Hand More Info/Options for Drag Specialties Vinyl Throttle Cable 198664

$19.95 Chrome Drag Specialties Replacement Clutch Lever for Slotted Wide-Blade Lever Sets Dennis Kirk Part #: 573910 Chrome Drag Specialties Replacement Clutch Lever for Slotted Wide-Blade Lever Sets: Strong, die-cast aluminum with CNC-machined slots. Includes anti-rattle clip and clutch lever pivot bushings. Replacement clutch lever for Part Nos. 57-3908 and 57-3909.. 1 on Hand More Info/Options for Chrome Drag Specialties Replacement Clutch Lever for Slotted Wide-Blade Lever Sets

$93.95 H59604 Drag Specialties 10 in. Dimpled 1 in. T-Bar Dennis Kirk Part #: H59604 H59604 Drag Specialties 10 in. Dimpled 1 in. T-Bar: Manufacturer part # 300402 - Choose between dimpled or dimpled and drilled for internal wiring. All bars feature a show chrome finish with built in risers, 3.5 in. bolt center and accept most 1 in. T-bar gauge mounts. Made in the U.S.A... 300402 1 on Hand More Info/Options for H59604 Drag Specialties 10 in. Dimpled 1 in. T-Bar

$204.95 H59147 Drag Specialties Dresser Style Flame 1 1/4 in. Tattoo Handlebar Dennis Kirk Part #: H59147 H59147 Drag Specialties Dresser Style Flame 1 1/4 in. Tattoo Handlebar: Manufacturer part # 300458 - Chromed handlebars with an engraved flame design on exposed sections. Work with standard controls; drilled for internal wires. Finish is brilliant show chrome. Springer-style bars have the area between the risers increased to 1 1/4 in. for a smooth finished look; work with the OEM Springer risers and handlebar clamps. Billet gauge mounts for T-Bars are available separately in three styles. 1 1/4 in. thick risers are also available to complete the Buffalo look. Handlebar clamps cover all of the center area that is sized down to 1 in. (not available for Springer models). Made in the U.S.A., , 1" Diameter Clamping Width: 5-1/8", Inside Width of Knurling/Outside: 2-3/4" / 4-1/4", Drilled for Internal Wiring: Yes. 300458 1 on Hand More Info/Options for H59147 Drag Specialties Dresser Style Flame 1 1/4 in. Tattoo Handlebar

$64.95 Drag Specialties Grips 595507 Dennis Kirk Part #: 595507 Drag Specialties Grips 595507: Die-cast, then polished and chrome-plated. All-day riding is made easier by the soft rubber insets. Features a setscrew attachment on the left-side grip. Matching shift peg Part No. 49-4505 available separately. Matching foot pegs Part No. 49-4504 available separately. Brought to you exclusively by Drag Specialties, , Note: Will not fit models with handlebar air reservoirs.. 2 on Hand More Info/Options for Drag Specialties Grips 595507

$74.95 Chrome Drag Specialties Flame Teardrop Mirror with Sculptured Flame Stem Dennis Kirk Part #: 392559 Chrome Drag Specialties Flame Teardrop Mirror with Sculptured Flame Stem: Manufacturer part # 72423MBX33 - Constructed of chrome-plated die-cast aluminum. Features teardrop head with 3D graphics and chrome mounting hardware. Flame 6in. stem. Mirror head measures 5 1/4 in. x 2 1/2 in.. Sold in pairs. NOTE: For metric cruisers - mirror adapters use part number H39009 or H39010. 72423MBX33 10+ on hand More Info/Options for Chrome Drag Specialties Flame Teardrop Mirror with Sculptured Flame Stem

$213.95 H59138 Drag Specialties 8 in. T-Bar Flame 1 1/4 in. Tattoo Handlebar Dennis Kirk Part #: H59138 H59138 Drag Specialties 8 in. T-Bar Flame 1 1/4 in. Tattoo Handlebar: Manufacturer part # 300452 - Chromed handlebars with an engraved flame design on exposed sections. Work with standard controls; drilled for internal wires. Finish is brilliant show chrome. Springer-style bars have the area between the risers increased to 1 1/4 in. for a smooth finished look; work with the OEM Springer risers and handlebar clamps. Billet gauge mounts for T-Bars are available separately in three styles. 1 1/4 in. thick risers are also available to complete the Buffalo look. Handlebar clamps cover all of the center area that is sized down to 1 in. (not available for Springer models). Made in the U.S.A... 300452 1 on Hand More Info/Options for H59138 Drag Specialties 8 in. T-Bar Flame 1 1/4 in. Tattoo Handlebar

$74.95 Drag Specialties Teardrop Mirrors 392439 Dennis Kirk Part #: 392439 Drag Specialties Teardrop Mirrors 392439: Manufacturer part # MT76301B4 - Custom-mirror design at a great price. Aluminum die-cast construction, polished and chrome plated. Includes mounting hardware, sold in pairs. Glass Size: 5 1/5 in. W x 1 13/16 in. H Stem Length: 3 and 4 1/4 in./2 and 4 in. Method of Attachment: 5/16 in. x 18 x 1 in./ 1 1/2 RH Thread. NOTE: For metric crusiers - mirror adapters use part number H39009 or H39010. MT76301B4 10+ on hand More Info/Options for Drag Specialties Teardrop Mirrors 392439

$7.95 Drag Specialties 5' x 5/16" dia. Chrome Cable Covering 49417 Dennis Kirk Part #: 49417 Drag Specialties 5' x 5/16" dia. Chrome Cable Covering 49417: Manufacturer part # DS223001 - Five-foot lengths of flexible chrome, coiled plastic covering in two diameters. Gives electrical wires and control cables a clean look.. DS223001 10+ on hand More Info/Options for Drag Specialties 5' x 5/16" dia. Chrome Cable Covering 49417

$249.95 H571605 Drag Specialties Brake and Clutch Control Set for Dual Disc Dennis Kirk Part #: H571605 H571605 Drag Specialties Brake and Clutch Control Set for Dual Disc: Manufacturer part # DS290720 - Drag Specialties is an industry-leading dealer-distributor of aftermarket parts and accessories for Harley-Davidson Chrome handlebar-mounted brake and clutch control assemblies are better than OEM. Switch housings are improved by eliminating the unsightly groove cast into OEM pieces. Use stock wiring and switches. Assemblies match the latest styles used on most models. 3/4" (.750") bore. DS290720 2 on Hand More Info/Options for H571605 Drag Specialties Brake and Clutch Control Set for Dual Disc

$0.95 H270095 Drag Specialties Wire Retainer Handlebar Switch Dennis Kirk Part #: H270095 H270095 Drag Specialties Wire Retainer Handlebar Switch: Manufacturer part # DS272193 - Replacement wire retainer for H571605, H571606 or H571607 Brake and Clutch controls.. DS272193 10+ on hand More Info/Options for H270095 Drag Specialties Wire Retainer Handlebar Switch

$10.95 H5762 Drag Specialties Master Cylinder Rebuild Kit Dennis Kirk Part #: H5762 H5762 Drag Specialties Master Cylinder Rebuild Kit: Manufacturer part # 4506372PELB1 - Rebuild kit for H57-1611 or H57-67. 4506372PELB1 4 on Hand More Info/Options for H5762 Drag Specialties Master Cylinder Rebuild Kit

$232.95 H59150 Drag Specialties 9.5 in. Ape Hanger Flame 1 1/4 in. Tattoo Handlebar for Springer Dennis Kirk Part #: H59150 H59150 Drag Specialties 9.5 in. Ape Hanger Flame 1 1/4 in. Tattoo Handlebar for Springer: Manufacturer part # 300461 - Chromed handlebars with an engraved flame design on exposed sections. Work with standard controls; drilled for internal wires. Finish is brilliant show chrome. Springer-style bars have the area between the risers increased to 1 1/4 in. for a smooth finished look; work with the OEM Springer risers and handlebar clamps. Billet gauge mounts for T-Bars are available separately in three styles. 1 1/4 in. thick risers are also available to complete the Buffalo look. Handlebar clamps cover all of the center area that is sized down to 1 in. (not available for Springer models). Made in the U.S.A., , Diameter Clamping Width: 6-3/4", Inside Width of Knurling/Outside: 4-1/16" / 5-7/16", Drilled for Internal Wiring: Yes. 300461 2 on Hand More Info/Options for H59150 Drag Specialties 9.5 in. Ape Hanger Flame 1 1/4 in. Tattoo Handlebar for Springer

$4.95 H190004 Drag Specialties Handlebar Wiring Clip - 1/2 in. ID Dennis Kirk Part #: H190004 H190004 Drag Specialties Handlebar Wiring Clip - 1/2 in. ID: Manufacturer part # DS272334 - Nylon clips are chrome plated. Durable and crack resistant. Designed to meet or exceed OEM specifications. Sold in packs of four. Made in the U.S.A.. Replaces OEM number 70345-84.. DS272334 3 on Hand More Info/Options for H190004 Drag Specialties Handlebar Wiring Clip - 1/2 in. ID

$39.95 Left Drag Specialties Gothic Mirror w/Flame Sculptured Stem Dennis Kirk Part #: 392334 Left Drag Specialties Gothic Mirror w/Flame Sculptured Stem: Manufacturer part # 06400035 - Aluminum construction with a chrome-plated finish. Designed for left side applications. Sold each. Includes 6" stem. For matching Right mirror - 392335. Glass: 4 1/4 in. x 1 3/4 in. NOTE: For metric crusiers - mirror adapters Part No. 27-830(right hand thread) or Part No. 27-831 (yamaha models with left hand thread on right hand mirror) are required.. 06400035 10+ on hand More Info/Options for Left Drag Specialties Gothic Mirror w/Flame Sculptured Stem

$89.95 Drag Specialties 1 in. Superbar Handlebar 595215 Dennis Kirk Part #: 595215 Drag Specialties 1 in. Superbar Handlebar 595215: Manufacturer part # 06010576 - Show-chrome finish for style. Seamless steel tubing construction. Wide variety of bends. Smooth unknurled style with dimples.. 06010576