TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

Samson Legend Series Cannons Exhaust System S2-901

CLEARANCE! Was: $756.99 Now: $681.29 Exhaust: Hindle Direct Bolt-On Polished Aluminum Oval Muffler w/Supersport Baffle S13GPR18OV Manufacturer: Hindle Dennis Kirk Part #: 4400722 Hindle Direct Bolt-On Polished Aluminum Oval Muffler w/Supersport Baffle : Manufacturer part # S13GPR18OV - Less weight, more power and better sound in a stylish performance package. Polished aluminum muffler has Hindle supersport race baffle, rolled steel exhaust tip and stainless steel core. Muffler bolt directly to stock exhaust flanges. All necessary mounting hardware included. Sold each, , Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. S13GPR18OV 1 on hand More Info/Options for Hindle Direct Bolt-On Polished Aluminum Oval Muffler w/Supersport Baffle S13GPR18OV

CLEARANCE! Was: $908.99 Now: $818.09 Exhaust: Hindle Direct Bolt-On Titanium Oval Muffler w/Supersport Baffle S13TGPR18OV Manufacturer: Hindle Dennis Kirk Part #: 4400724 Hindle Direct Bolt-On Titanium Oval Muffler w/Supersport Baffle: Manufacturer part # S13TGPR18OV - Less weight, more power and better sound in a stylish performance package. Titanium muffler has Hindle supersport race baffle, rolled steel exhaust tip and stainless steel core. Muffler bolt directly to stock exhaust flanges. All necessary mounting hardware included. Sold each Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. S13TGPR18OV 1 on hand More Info/Options for Hindle Direct Bolt-On Titanium Oval Muffler w/Supersport Baffle S13TGPR18OV

$522.99 Exhaust: Samson Crossover Header Pipes S2-330 Manufacturer: Samson Dennis Kirk Part #: 4401999 Samson Crossover Header Pipes: Manufacturer part # S2-330 - Chrome-plated, heli-arc welded true dual-header system. Eliminates the scavange pipe, which allows the system to quickly move the exhaust gases; improves air flow and reduces heat on the right side. Heat shields, clamps and mounting brackets included. Crossover-style headers accept Samson Silver Bullet slash-cut 24 in-H444665 or fishtail 27 in.-H444664. Must purchase mufflers separately. Made in the U.S.A... S2-330 2 on hand More Info/Options for Samson Crossover Header Pipes S2-330

$661.99 Exhaust: Samson True Dual Short Fishtail System S2-430 Manufacturer: Samson Dennis Kirk Part #: 4401676 Samson True Dual Short Fishtail System: Manufacturer part # S2-430 - The king of fishtails does it again. 2 1/4 in., 220 deg. full-coverage mufflers cover up and discoloration and keep your pipes looking great. Baffles are are integrated, non-removable and work well with fuel-injected bikes. Made in the U.S.A.. , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. S2-430 1 on hand More Info/Options for Samson True Dual Short Fishtail System S2-430

$661.99 Exhaust: Samson True Dual Long Fishtail System S2-431 Manufacturer: Samson Dennis Kirk Part #: 4401677 Samson True Dual Long Fishtail System: Manufacturer part # S2-431 - The king of fishtails does it again. 2 1/4 in., 220 deg. full-coverage mufflers cover up and discoloration and keep your pipes looking great. Baffles are are integrated, non-removable and work well with fuel-injected bikes. Made in the U.S.A.. , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. S2-431 1 on hand More Info/Options for Samson True Dual Long Fishtail System S2-431

$661.99 Exhaust: Samson True Dual Short Longtail System S2-432 Manufacturer: Samson Dennis Kirk Part #: 4401678 Samson True Dual Short Longtail System: Manufacturer part # S2-432 - The king of fishtails does it again. 2 1/4 in., 220 deg. full-coverage mufflers cover up and discoloration and keep your pipes looking great. Baffles are are integrated, non-removable and work well with fuel-injected bikes. Made in the U.S.A.. , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. S2-432 1 on hand More Info/Options for Samson True Dual Short Longtail System S2-432

$661.99 Exhaust: Samson True Duals Long Longtail System S2-433 Manufacturer: Samson Dennis Kirk Part #: 4401679 Samson True Duals Long Longtail System: Manufacturer part # S2-433 - The king of fishtails does it again. 2 1/4 in., 220 deg. full-coverage mufflers cover up and discoloration and keep your pipes looking great. Baffles are are integrated, non-removable and work well with fuel-injected bikes. Made in the U.S.A.. , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. S2-433 1 on hand More Info/Options for Samson True Duals Long Longtail System S2-433

$797.99 Exhaust: Samson True Dual Cholo Longtail Exhaust System S2-435 Manufacturer: Samson Dennis Kirk Part #: 4401669 Samson True Dual Cholo Longtail Exhaust System: Manufacturer part # S2-435 - 39 in. Longtail mufflers. The king of fishtails does it again. 2 1/4 in., 220 deg. full-coverage mufflers cover up and discoloration and keep your pipes looking great. Baffles are are integrated, non-removable and work well with fuel-injected bikes. Made in the U.S.A.. , NOTE: , For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337, , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. S2-435 1 on hand More Info/Options for Samson True Dual Cholo Longtail Exhaust System S2-435

$759.99 Exhaust: Samson Legend Series True Dual w/Longtail Mufflers S2-437 Manufacturer: Samson Dennis Kirk Part #: 4402514 Samson Legend Series True Dual w/Longtail Mufflers: Manufacturer part # S2-437 - Finished in Samson's "Quad" chrome for a deep, sultry shine. Increase gas mileage while producing more horsepower and torque. Full-coverage 2 1/4 in., 220 degrees heat shields merge with non-baffled Longtail mufflers. Dual O2 sensor ports accept OEM and aftermarket sensors. Fully assembled and ready to install. C.A.R.B. approved. Made in the U.S.A.. , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing, , Included Items: , 1. (4) 3/8-16 x 1 1/4 in. hex head bolts, 2. (4) 5/16-18 x 3/4 in. hex head bolts, 3. (3) 1 7/8 in. barrel clamps (SP11-17), 4. (1) Coil mounting bracket, 5. (1) Right side muffler bracket (SP06-70), 6. (1) Left side muffler bracket (SP06-71), 7. (8) Hose clamps, 8. (4) 5/16 in. lock washers, 9. (4) 3/8 in. flat washers, 10. (1) Shifter rod, 11. (3) Heat shields. S2-437 1 on hand More Info/Options for Samson Legend Series True Dual w/Longtail Mufflers S2-437

$854.99 Exhaust: Samson Legend Series True Duals with Cholo Longtail Mufflers S2-438 Manufacturer: Samson Dennis Kirk Part #: 4402515 Samson Legend Series True Duals with Cholo Longtail Mufflers: Manufacturer part # S2-438 - Finished in Samson's "Quad" chrome for a deep, sultry shine. Increase gas mileage while producing more horsepower and torque. Full-coverage 2 1/4 in., 220 degrees heat shields merge with non-baffled Longtail mufflers. Dual O2 sensor ports accept OEM and aftermarket sensors. Fully assembled and ready to install. C.A.R.B. approved. Made in the U.S.A.. , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , Included Items:, 1. (4) 3/8-16 x 1 1/4 in. hex head blots, 2. (4) 5/16-18 x 3/4 in. hex head bolts, 3. (3) 1 7/8 in. barrel clamps (SP11-17), 4. (1) Coil mounting bracket (SP06-80), 5. (1) Right side muffler bracket (SP06-70), 6. (1) Left side muffler bracket (SP06-71), 7. (8) Hose clamps, 8. (4) 5/16 in. lock washers, 9. (4) 3/8 in. Flat washers, 10. (1) Shifter rod, 11. (3) Heat shields. S2-438 1 on hand More Info/Options for Samson Legend Series True Duals with Cholo Longtail Mufflers S2-438

$569.99 Exhaust: Samson Legend Series Cannons Exhaust System S2-901 Manufacturer: Samson Dennis Kirk Part #: 4402504 Samson Legend Series Cannons Exhaust System: Manufacturer part # S2-901 - Timeless style and white-knuckle performance that has made Samson a legend. Increase gas mileage while producing more horsepower and torque. Finished in Samson's new "Quad" chrome for a deep, lasting shine. Headers are stepped from 1 3/4" to 2 1/4" to accelerate exhaust flow. 2 1/2" full-coverage, removable heat shields. Dual O2 sensor ports accept OEM and aftermarket sensors. Removable baffles are designed to get the most out of modern fuel-injected motors. Fully assembled and ready to install. C.A.R.B. approved. Made in the U.S.A., , NOTE: , O2 sensor plugs not included, order part no. 4402703 or 251457. , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing. , , Included Items:. , 1. (2) 3/8"-16 x 3/4" hex head bolts. , 2. (2) 3/8" flat washers. , 3. (2) 5/16-18 x 3/4" carriage bolts , 4. (2) 5/16-18 nylock nuts (thick) , 5. (2) 5/16" flat washers , 6. (1) SP06-76 mounting brackets. , 7. (2) 1/4-20 allen head bolts. , 8. (2) SP04-20 removable baffle , 9. (5) #24 hose clamps. S2-901 3 on hand More Info/Options for Samson Legend Series Cannons Exhaust System S2-901

$569.99 Exhaust: Samson Legend Series Shotgun Longtails Exhaust System S2-910 Manufacturer: Samson Dennis Kirk Part #: 4402511 Samson Legend Series Shotgun Longtails Exhaust System: Manufacturer part # S2-910 - Timeless style and white-knuckle performance that has made Samson a legend. Increase gas mileage while producing more horsepower and torque. Finished in Samson's new "Quad" chrome for a deep, lasting shine. Headers are stepped from 1 3/4" to 2 1/4" to accelerate exhaust flow. 2 1/2" full-coverage, removable heat shields. Dual O2 sensor ports accept OEM and aftermarket sensors; plugs included. Removable baffles are designed to get the most out of modern fuel-injected motors. Fully assembled and ready to install. C.A.R.B. approved. Made in the U.S.A.. , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing. , , Included Items:. , 1. (1) 3/8" x 3/4" hex head bolt. , 2. (1) 3/8" flat washer. , 3. (1) 3/8-16 x 2 1/2" allen head bolt. , 4. (6) # 24 hose clamps. , 5. (2) 1/4-20 allen head bolts. , 6. (2) SP04-20 removable baffles. , 7. (2) Pipes with heatshields. S2-910 1 on hand More Info/Options for Samson Legend Series Shotgun Longtails Exhaust System S2-910

$569.99 Exhaust: Samson Legend Series Longhorns Exhaust System S2-911 Manufacturer: Samson Dennis Kirk Part #: 4402512 Samson Legend Series Longhorns Exhaust System: Manufacturer part # S2-911 - Timeless style and white-knuckle performance that has made Samson a legend. Increase gas mileage while producing more horsepower and torque. Finished in Samson's new "Quad" chrome for a deep, lasting shine. Headers are stepped from 1 3/4" to 2 1/4" to accelerate exhaust flow. 2 1/2" full-coverage, removable heat shields. Dual O2 sensor ports accept OEM and aftermarket sensors; plugs included. Removable baffles are designed to get the most out of modern fuel-injected motors. Fully assembled and ready to install. C.A.R.B. approved. Made in the U.S.A.. , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing. , , Included Items:. , 1. (2) 3/8" x 3/4" hex head bolts. , 2. (2) 3/8" flat washer. , 3. (5) # 24 hose clamps. , 4. (2) 5/16-18 x 3/4" carriage bolts. , 5. (2) 5/16-18 nylock nuts (thick). , 6. (2) 5/16-18 flat washers. , 7. (1) SP06-76 mounting bracket. , 8. (2) 1/4-20 allen head bolts. , 9. (2) SP04-20 removable baffle. , 10. (2) Pipes with head shields. S2-911 2 on hand More Info/Options for Samson Legend Series Longhorns Exhaust System S2-911

$569.99 Exhaust: Samson Legend Series Renegades Exhaust System S2-912 Manufacturer: Samson Dennis Kirk Part #: 4402513 Samson Legend Series Renegades Exhaust System: Manufacturer part # S2-912 - Timeless style and white-knuckle performance that has made Samson a legend. Increase gas mileage while producing more horsepower and torque. Finished in Samson's new "Quad" chrome for a deep, lasting shine. Headers are stepped from 1 3/4" to 2 1/4" to accelerate exhaust flow. 2 1/2" full-coverage, removable heat shields. Dual O2 sensor ports accept OEM and aftermarket sensors; plugs included. Removable baffles are designed to get the most out of modern fuel-injected motors. Fully assembled and ready to install. C.A.R.B. approved. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. , , Included Items:. , 1. (2) 3/8" x 3/4" hex head bolts. , 2. (2) 3/8" flat washers. , 3. (6) #24 hose clamps. , 4. (1) 3/8-16 x 2 1/2" allen head bolts. , 5. (2) 5/16-18 x 3/4" carriage bolts. , 6. (2) 5/16" flat washers. , 7. (2) 5/16-18 nylock nuts(thick). , 8. (1) SO06-7 strap bracket. , 9. (2) 1/4-20 allen head bolts. , 10. (2) SP04-20 removable baffle. S2-912 2 on hand More Info/Options for Samson Legend Series Renegades Exhaust System S2-912

$569.99 Exhaust: Samson Legend Series Boloney Cut Exhaust System S2-930 Manufacturer: Samson Dennis Kirk Part #: 4402505 Samson Legend Series Boloney Cut Exhaust System: Manufacturer part # S2-930 - Timeless style and white-knuckle performance that has made Samson a legend. Increase gas mileage while producing more horsepower and torque. Finished in Samson's new "Quad" chrome for a deep, lasting shine. Headers are stepped from 1 3/4 in.; to 2 1/4 in.; to accelerate exhaust flow. 2 1/2 in.; full-coverage, removable heat shields. Dual O2 sensor ports accept OEM and aftermarket sensors. Removable baffles are designed to get the most out of modern fuel-injected motors. Fully assembled and ready to install. C.A.R.B. approved. Made in the U.S.A., , NOTE: , O2 sensor plugs not included, order part no. 4402703 or 251457. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing., , INCLUDED ITEMS , (2) Exhaust pipes w/heat shields, (1) Mounting bracket, (2) 3/8 in.-16 X 3/4 in. hex head bolts, (2) 5/16 in-18 X 3/4 in. carriage bolts, (2) 3/8 in.-16 nylock nuts, (2) 3/8 in. flat washers, (2) 5/16 in. flat washers. S2-930 1 on hand More Info/Options for Samson Legend Series Boloney Cut Exhaust System S2-930

$569.99 Exhaust: Samson Legend Series Pomona Pipes Exhaust System S2-931 Manufacturer: Samson Dennis Kirk Part #: 4402506 Samson Legend Series Pomona Pipes Exhaust System: Manufacturer part # S2-931 - Timeless style and white-knuckle performance that has made Samson a legend. Increase gas mileage while producing more horsepower and torque. Finished in Samson's new "Quad" chrome for a deep, lasting shine. Headers are stepped from 1 3/4" to 2 1/4" to accelerate exhaust flow. 2 1/2" full-coverage, removable heat shields. Dual O2 sensor ports accept OEM and aftermarket sensors; plugs included. Removable baffles are designed to get the most out of modern fuel-injected motors. Fully assembled and ready to install. C.A.R.B. approved. Made in the U.S.A.. , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. , , Included Items:. , 1. (2) 3/8"-16 x 3/4" hex head bolts. , 2. (2) 3/8" flat washers. , 3. (2) 5/16-18 x 3/4" carriage bolts. , 4. (2) 5/16-18 nylock nuts (thick).