Rinehart 2-into-1 Exhaust System R52392CG

This site contains about 138,282 documents.

View by:

Page: 1 700 800 900 1,000 1,100 1,200 1,300 1,400 1,500 1,600 1,610 1,620 1,630 1,640 1,650 1,660 1,670 1,680 1,688 1,689 1,690 1,691 1,692 1,693 1,694 1,695 1,696 1,697 1,698 1,699 1,700 1,701 1,702 1,703 1,704 1,705 1,706 1,707 1,708 1,709 1,710 1,711 1,712 1,713 1,714 1,715 1,716 1,717 1,720 1,730 1,740 1,750 1,760 1,770 1,780 1,790 1,800 1,900 2,000 2,100 2,200 2,300 2,400 2,500 2,600 2,700 3,000 4,000 4,610

$857.95 Exhaust: BUB Staggered Exhaust System R52001CG
Manufacturer: BUB
Dennis Kirk Part #: 449610
BUB Staggered Exhaust System: Manufacturer part # R52001CG - High-powered systems developed for the motorcycle industry by Gerald Rinehart, owner of Rinehart Racing. Headers feature multi-bend radius technology and stepped size increase: 1 3/4 in. at the head, 1 7/8 in. mid and a 2 in. finish. Header pipes are covered by permanently mounted 2 1/2 in.-diameter full-length heat shields for a never-blueing look. Stepped headers and special removable performance baffles on these asphalt-pounding powerhouses lay down a sound that will have you feeling like you're running your own victory lap at the Brickyard -- a powerful staccato rumble reminiscent of a NASCAR champion. Systems are highlighted by the polished black anodized billet-aluminum end caps engraved with the Rinehart logo. Replacement/optional end caps sold each. Repl. end cap black - 44-9076. Optional end cap chrome - 44-9077. NOTE: Only has one oxygen sensor port, this port is for models with a closed-loop aftermarket fuel management system and come with a plug for models without it. For flush-style exhaust order Part No. 44-9609, , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. R52001CG
5 on hand

More Info/Options for BUB Staggered Exhaust System R52001CG

CLEARANCE!
Was: $857.95
Now: $514.77
Exhaust: BUB Rinehart Flush Style Exhaust R52002CG
Manufacturer: BUB
Dennis Kirk Part #: 449611
BUB Rinehart Flush Style Exhaust: Manufacturer part # R52002CG - High-powered systems developed for the motorcycle industry by Gerald Rinehart, owner of Rinehart Racing. Headers feature multi-bend radius technology and stepped size increase: 1 3/4 in. at the head, 1 7/8 in. mid and a 2 in. finish. Header pipes are covered by permanently mounted 2 1/2 in.-diameter full-length heat shields for a never-blueing look. Stepped headers and special removable performance baffles on these asphalt-pounding powerhouses lay down a sound that will have you feeling like you're running your own victory lap at the Brickyard -- a powerful staccato rumble reminiscent of a NASCAR champion. Systems are highlighted by the polished black anodized billet-aluminum end caps engraved with the Rinehart logo. Replacement/optional end caps sold each. Repl. end cap black - 44-9076. Optional end cap chrome - 44-9077. , NOTE: Single Oxygen sensor port NOTE: Only has one oxygen sensor port, this port is for models with a closed-loop aftermarket fuel management system and come with a plug for models without it, , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models, NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. R52002CG
1 on hand

More Info/Options for BUB Rinehart Flush Style Exhaust R52002CG

$899.95 Exhaust: BUB Staggered Exhaust System R52003CG
Manufacturer: BUB
Dennis Kirk Part #: 449612
BUB Staggered Exhaust System: Manufacturer part # R52003CG - High-powered systems developed for the motorcycle industry by Gerald Rinehart, owner of Rinehart Racing. Includes 02 sensor port, which accepts closed loop aftermarket fuel management systems that use an 02 sensor, for better performance and reliability. Headers feature multi-bend radius technology and stepped size increase: 1 3/4 in. at the head, 1 7/8 in. mid and a 2 in. finish. Header pipes are covered by permanently mounted 2 1/2 in. diameter full-length heat shields for a never-blueing look. Stepped headers and special removable performance baffles on these asphalt-pounding powerhouses lay down a sound that will have you feeling like you're running your own victory lap at the Brickyard -- a powerful staccato rumble reminiscent of a NASCAR champion. Systems are highlighted by the polished black anodized billet-aluminum end caps engraved with the Rinehart logo. Replacement/optional end caps sold each. Repl. end cap black 44-02637. Optional end cap chrome 44-9077. NOTE: Only has one oxygen sensor port, this port is for models with a closed-loop aftermarket fuel management system and come with a plug for models without it, , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. R52003CG
1 on hand

More Info/Options for BUB Staggered Exhaust System R52003CG

$899.95 Exhaust: BUB Rinehart Flush Style Exhaust R52006CG
Manufacturer: BUB
Dennis Kirk Part #: 4401119
BUB Rinehart Flush Style Exhaust: Manufacturer part # R52006CG - High-powered systems developed for the motorcycle industry by Gerald Rinehart, owner of Rinehart Racing. Includes dual 02 sensor ports. Headers feature multi-bend radius technology and stepped size increase: 1 3/4" at the head, 1 7/8" mid and a 2" finish. Header pipes are covered by permanently mounted 2 1/2"-diameter full-length heat shields for a never-blueing look. Stepped headers and special removable performance baffles on these asphalt-pounding powerhouses lay down a sound that will have you feeling like you're running your own victory lap at the Brickyard -- a powerful staccato rumble reminiscent of a NASCAR champion. Systems are highlighted by the polished black anodized billet-aluminum end caps engraved with the Rinehart logo. Replacement/optional end caps sold each. Repl. end cap black - 44-02637. Optional end cap chrome - 44-9077. Designed and built in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. R52006CG
1 on hand

More Info/Options for BUB Rinehart Flush Style Exhaust R52006CG

$899.95 Exhaust: BUB Staggered Exhaust System R52007CG
Manufacturer: BUB
Dennis Kirk Part #: 4401120
BUB Staggered Exhaust System: Manufacturer part # R52007CG - High-powered systems developed for the motorcycle industry by Gerald Rinehart, owner of Rinehart Racing. Includes dual 02 sensor ports. Headers feature multi-bend radius technology and stepped size increase: 1 3/4 inch at the head, 1 7/8 inch mid and a 2 inch finish. Header pipes are covered by permanently mounted 2 1/2 inch-diameter full-length heat shields for a never-blueing look. Stepped headers and special removable performance baffles on these asphalt-pounding powerhouses lay down a sound that will have you feeling like you're running your own victory lap at the Brickyard -- a powerful staccato rumble reminiscent of a NASCAR champion. Systems are highlighted by the polished black anodized billet-aluminum end caps engraved with the Rinehart logo. Replacement/optional end caps sold each. Repl. end cap black - 44-02637. Optional end cap chrome - 44-9077. Designed and built in the U.S.A.. , Included Items: , (1) 2-2 Flush front header, (1) 2-2 Front heat shield flush, (1) 2-2 Staggered front header, (1) 2-2 Front heat shield staggered, (7) 2-2 Rear header flush & staggered, 2 1/4 Stainless clamp, (2)(1) Transmission round spacer, (1) Transmission main spacer, (1) 2-2 Rinehart mounting bracket, (4) 5/16-18 x 3/4in. hex bolt, (4) 5/16-18 SAE locking nut, (4) SAE flat washers, (3) Stainless steel washers, (3) 5/16-18 x 3 1/2in. allen bolts, (1) Installation instructions, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. R52007CG
1 on hand

More Info/Options for BUB Staggered Exhaust System R52007CG

$984.95 Exhaust: Rinehart True Dual Exhaust With O2 Sensor R52220CG
Manufacturer: Rinehart
Dennis Kirk Part #: 4400318
Rinehart True Dual Exhaust With O2 Sensor : Manufacturer part # R52220CG - Same unique header design as the Softail and Dyna styles to provide the largest power increase of any exhaust system available. Includes one oxygen sensor port in the head pipes, which accept closed-loop aftermarket fuel management systems for better performance and reliability. Header features multi-bend radius technology and stepped size increase: 1 3/4 in. at the head, 1 7/8 in. mid and a 2 in. finish.. The header pipes include 2 1/4 in. diameter full-length heat shields. New black mounting bracket kit holds the rear pipe in the center for more support and less stress. New design torque-chamber baffles a rich sound with minimal noise, (96 dB at 2500 rpm). Muffler bodies measure 3 1/2 in.. This chromed system is highlighted by polished black anodized billet-aluminum end caps engraved with the Rinehart logo. Optional Quiet Baffles reduce exhaust sound and increase engine torque with only a slight loss of horsepower; optional performance baffles open up the exhaust for even greater power and torque gains; sold in pairs. Optional Quiet Baffles - 4401995, optional end cap (chrome) - 4401266, replacement black end cap - 4402636. 2 1/4 in. i.d. Hi-Flow Performance Baffles - 44-01265. Designed and built in the U.S.A.. , , NOTE: , FLHX/FLRS models may require adjustment of passenger pegs, , NOTE: , Only has one oxygen sensor port, this port is for models with a closed-loop aftermarket fuel management system and come with a plug for models without it, , INCLUDED ITEMS: , Three #28 hose clamps, Five #20 hose clamps, Two nut plates, One 6mm nylon lock, Two 10mm lock nuts, Two 1/2 in. washers, Two 10 x 30mm allen bolts, Four 5/16 in. x 5/8 in. flange head bolts, One 6 x 16mm flange bolt, Two 10 x 25mm button head allen bolt, , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. , , Included Items:. , 1. (1) FL Rinehart rear pipe. , 2. (1) FL Rinehard front pipe. , 3. (1) FL Rinehart Rear head shield. , 4. (1) FL Rinehart front head shield. , 5. (1) FL Rinehart R.T. muffler. , 6. (1) FL Rinehart L.F muffler. , 7. (7) 2 1/4" stainless clamp. , 8. (2) 2 1/8" barrek clamp. , 9. (1) 1 13/16 barrel clamp. , 10. (1) 2" P clamp 612-2000. , 11. (1 pr) James exhaust gaskets. , 12. (1) Header support bkt.. , 13. (1) Header support tab. , 14. (4) 5/16-18 x 5/8" hex bolts. , 15. (1) 5/16-18 x 1 1/4" hex bolts. , 16. (7) 5/16 flat washers. , 17. (6) 5/16-18 LOCKING NUT. , 18. (2) 1/2"-13x1/2 allen bolts. , 19. (2) .500 aluminum spacers. , 20. (1) 5/16-18 x 3/4 button hd.. , 21. (1) 5/16 distorted locking nut. , 22. (1) 02 bung plug. , 23. (1) Instruction sheet. R52220CG
4 on hand

More Info/Options for Rinehart True Dual Exhaust With O2 Sensor R52220CG

$657.95 Exhaust: Rinehart 2-into-1 Exhaust System R52392CG
Manufacturer: Rinehart
Dennis Kirk Part #: 4400297
Rinehart 2-into-1 Exhaust System : Manufacturer part # R52392CG - Mitered 1 7/8 in. headers feature a machined inlet for increased exhaust velocity and better anti-reversion operation. Include full-coverage 2 1/4 in. anti-blueing heat shields. An added heat shield makes the header-muffler junction look smooth. 4 1/2 in. megaphone-style muffler creates a rich, deep tone. Multi-Angled Bell (MAB) technology on aluminum end cap provides faster throttle response and higher torque and horsepower levels. Designed and built in the U.S.A.. , NOTE: , Single Oxygen sensor port, , INCLUDED ITEMS: , (1) Rinehart 2-1 Hdr, (1) 2-1 Front Heat Shield, (1) 2-1 Rear Heat Shield, (1) 2-1 Collector Heat Shield, (1) 2-1 Muffler Rinehart, (1) 2-1 Mounting Bracket, (2) James Exhaust Gaskets, (1) Transmission Round Spacer, (2) Transmission Main Spacer, (2) Foot Peg Spacer, (7) 2-1/4 in. Stainless Clamp, (1) 2-1 Muffler Clamp, (1) 3-1/8 in. Hose Clamp, (2) 5/16-18 x 3/4 in. Hex Bolt, (2) 5/16-18 Locking Nut, (6) 5/16 Flat Washer, (1) 5/16 Lock Washer, (3) 5/16-18 x 3 1/4 in. Allen Bolts, (1) Installation Instructions, , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models, , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. R52392CG
3 on hand

More Info/Options for Rinehart 2-into-1 Exhaust System R52392CG

CLEARANCE!
Was: $628.95
Now: $377.37
Exhaust: Rinehart 2-into-1 Exhaust System R52394CG
Manufacturer: Rinehart
Dennis Kirk Part #: 4400299
Rinehart 2-into-1 Exhaust System : Manufacturer part # R52394CG - Mitered 1 7/8in. headers feature a machined inlet for increased exhaust velocity and better anti-reversion operation. Include full-coverage 2 1/4in. anti-blueing heat shields. An added heat shield makes the header-muffler junction look smooth. 4 1/2in. megaphone-style muffler creates a rich, deep tone. Multi-Angled Bell (MAB) technology on aluminum end cap provides faster throttle response and higher torque and horsepower levels. Designed and built in the U.S.A.. , NOTE: Does not fit custom or low ride models NOTE: There is no warranty on exhaust with any regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carb jetting, over heating, etc., and is nt caused by defective manufacturing. See our Chems/Lubes section for products that will help prevent or remove blueing.. R52394CG
1 on hand

More Info/Options for Rinehart 2-into-1 Exhaust System R52394CG

$657.95 Exhaust: Rinehart 2-into-1 Exhaust System R52395CG
Manufacturer: Rinehart
Dennis Kirk Part #: 4400300
Rinehart 2-into-1 Exhaust System : Manufacturer part # R52395CG - Mitered 1 7/8 in. headers feature a machined inlet for increased exhaust velocity and better anti-reversion operation. Include full-coverage 2 1/4 in. anti-blueing heat shields. An added heat shield makes the header-muffler junction look smooth. 4 1/2 in. megaphone-style muffler creates a rich, deep tone. Multi-Angled Bell (MAB) technology on aluminum end cap provides faster throttle response and higher torque and horsepower levels. Designed and built in the U.S.A.. , NOTE: , Only has one oxygen sensor port, this port is for models with a closed-loop aftermarket fuel management system and come with a plug for models without it, , NOTE: , For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337, , NOTE: , There is no warranty on exhaust with any regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carb jetting, over heating, etc., and is nt caused by defective manufacturing., , See our Chems/Lubes section for products that will help prevent or remove blueing. R52395CG
1 on hand

More Info/Options for Rinehart 2-into-1 Exhaust System R52395CG

$899.95 Exhaust: BUB Rinehart Flush Style Exhaust R53000CG
Manufacturer: BUB
Dennis Kirk Part #: 4401474
BUB Rinehart Flush Style Exhaust: Manufacturer part # R53000CG - High-powered systems developed for the motorcycle industry by Gerald Rinehart, owner of Rinehart Racing. Includes dual 02 sensor ports. Headers feature multi-bend radius technology and stepped size increase: 1 3/4 in. at the head, 1 7/8 in. mid and a 2 in. finish. Header pipes are covered by permanently mounted 2 1/2 in.-diameter full-length heat shields for a never-blueing look. Stepped headers and special removable performance baffles on these asphalt-pounding powerhouses lay down a sound that will have you feeling like you're running your own victory lap at the Brickyard -- a powerful staccato rumble reminiscent of a NASCAR® champion. Systems are highlighted by the polished black anodized billet-aluminum end caps engraved with the Rinehart logo. Replacement/optional end caps sold each. Replacement end cap black - 4402637. Optional end cap chrome - 44-9077. Designed and built in the U.S.A.. , , NOTE: , For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337, , Included items , 1. (2) Drag pipes, 2. (1) Mounting bracket, 3. (2) 3/8 in. X 1 1/2 in. Hex bolts, 4. (2) 3/8 in. Flat washers, 5. (2) 3/8 in. Lock washers, 6. (4) 5/16 in. X 3/4 in. Hex bolts, 7. (4) 5/16 in. Nylock nuts, 8. (4) 5/16 in. Flat washers, 9. (2) Plugs, 10. (2) 1/2 in. Spacers, 11. (2) Exhaust gaskets, , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. R53000CG
1 on hand

More Info/Options for BUB Rinehart Flush Style Exhaust R53000CG

$899.95 Exhaust: BUB Staggered Exhaust System R53001CG
Manufacturer: BUB
Dennis Kirk Part #: 4401475
BUB Staggered Exhaust System: Manufacturer part # R53001CG - High-powered systems developed for the motorcycle industry by Gerald Rinehart, owner of Rinehart Racing. Includes dual 02 sensor ports. Headers feature multi-bend radius technology and stepped size increase: 1 3/4" at the head, 1 7/8 in. mid and a 2 in. finish. Header pipes are covered by permanently mounted 2 1/2 in.-diameter full-length heat shields for a never-blueing look. Stepped headers and special removable performance baffles on these asphalt-pounding powerhouses lay down a sound that will have you feeling like you're running your own victory lap at the Brickyard -- a powerful staccato rumble reminiscent of a NASCAR champion. Systems are highlighted by the polished black anodized billet-aluminum end caps engraved with the Rinehart logo. Replacement/optional end caps sold each. Replacement end cap black - 4402637. Optional end cap chrome - 44-9077. Designed and built in the U.S.A.. , , INCLUDED ITEMS: , Two drag pipes, One mounting brackets, Two exhaust gaskets, Two 3/8 in. x 1-1/2 in. hex bolts, Two 3/8 in. lock washers, Two 3/8 in. flat washers, Four 5/16 in. x 3/4 hex bolts, Four 5/16 in. flat washers, Four 5/16 in. nylock nuts, Two 1/2 in. spacers, Two pipe plugs, , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. R53001CG
2 on hand

More Info/Options for BUB Staggered Exhaust System R53001CG

$899.95 Exhaust: BUB Staggered Exhaust System R53005CG
Manufacturer: BUB
Dennis Kirk Part #: 4401476
BUB Staggered Exhaust System: Manufacturer part # R53005CG - High-powered systems developed for the motorcycle industry by Gerald Rinehart, owner of Rinehart Racing. Includes 02 sensor port. Headers feature multi-bend radius technology and stepped size increase: 1 3/4" at the head, 1 7/8" mid and a 2" finish. Header pipes are covered by permanently mounted 2 1/2"-diameter full-length heat shields for a never-blueing look. Optional stealth baffles for increased low-end torque with less sound: DK part no: H44-071. Stepped headers and special removable performance baffles on these asphalt-pounding powerhouses lay down a sound that will have you feeling like you're running your own victory lap at the Brickyard -- a powerful staccato rumble reminiscent of a NASCAR champion. Systems are highlighted by the polished black anodized billet-aluminum end caps engraved with the Rinehart logo. Replacement/optional end caps sold each. Repl. end cap black - H44-072. Optional end cap chrome - H44-073. Designed and built in the U.S.A.. INCLUDED ITEMS: Two drag pipes. One mounting bracket. Two 5/16" x 1" hex bolts. Four 5/16" x 3/4" hex bolts. Six 5/16" nylock nuts. Six 5/16" flat washers. Two 1/8" spacer washers. Two 1/4" spacer washers. , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. R53005CG
1 on hand

More Info/Options for BUB Staggered Exhaust System R53005CG

$857.95 Exhaust: BUB Staggered Exhaust System R53007CG
Manufacturer: BUB
Dennis Kirk Part #: 4401478
BUB Staggered Exhaust System: Manufacturer part # R53007CG - High-powered systems developed for the motorcycle industry by Gerald Rinehart, owner of Rinehart Racing. Includes dual 02 sensor ports. Headers feature multi-bend radius technology and stepped size increase: 1 3/4" at the head, 1 7/8" mid and a 2" finish. Header pipes are covered by permanently mounted 2 1/2"-diameter full-length heat shields for a never-blueing look. Stepped headers and special removable performance baffles on these asphalt-pounding powerhouses lay down a sound that will have you feeling like you're running your own victory lap at the Brickyard -- a powerful staccato rumble reminiscent of a NASCAR champion. Systems are highlighted by the polished black anodized billet-aluminum end caps engraved with the Rinehart logo. Replacement/optional end caps sold each. Repl. end cap black - 44-9076. Optional end cap chrome - 44-9077. Designed and built in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. R53007CG
1 on hand

More Info/Options for BUB Staggered Exhaust System R53007CG

$899.95 Exhaust: BUB Staggered Exhaust System R53008CG
Manufacturer: BUB
Dennis Kirk Part #: 4401473
BUB Staggered Exhaust System: Manufacturer part # R53008CG - High-powered systems developed for the motorcycle industry by Gerald Rinehart, owner of Rinehart Racing. Headers feature multi-bend radius technology and stepped size increase: 1 3/4" at the head, 1 7/8" mid and a 2" finish. Header pipes are covered by permanently mounted 2 1/2"-diameter full-length heat shields for a never-blueing look. Stepped headers and special removable performance baffles on these asphalt-pounding powerhouses lay down a sound that will have you feeling like you're running your own victory lap at the Brickyard -- a powerful staccato rumble reminiscent of a NASCAR champion. Systems are highlighted by the polished black anodized billet-aluminum end caps engraved with the Rinehart logo. Replacement end cap black - 44-02637. Optional end cap chrome - 44-9077. Replacement/optional end caps sold each. Designed and built in the U.S.A.. Included Items, 1. (1) 5/16" Box/End Wrench. , 2. (1) 1/2" Box/End Wrench. , 3. (1) 1/4" Ratchet and 6" Extention. , 4. (1) 1/2" Socket 1/4" Drive. , 5. (1) 3/8" Ratchet with 9/16 socket. , 6. (1) Flat Blade Screw Driver. , 7. (1) 5/16" Nut Driver. , 8. (1) T30 Torx Bit. , 9. (1) Snap Ring Pliers. , 10. (1) Hi-Temp Silicone Sealer, , NOTE: Dual Oxygen sensor ports, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. R53008CG