Hard Krome 3 in, Hard Krome 2 3, Big Straights with Hard-Tips p4402731

This site contains about 138,282 documents.

View by:

Page: 1 600 700 800 900 1,000 1,100 1,200 1,300 1,400 1,580 1,590 1,600 1,610 1,620 1,630 1,640 1,650 1,660 1,665 1,666 1,667 1,668 1,669 1,670 1,671 1,672 1,673 1,674 1,675 1,676 1,677 1,678 1,679 1,680 1,681 1,682 1,683 1,684 1,685 1,686 1,687 1,688 1,689 1,690 1,691 1,692 1,693 1,694 1,700 1,710 1,720 1,730 1,740 1,750 1,760 1,770 1,800 1,900 2,000 2,100 2,200 2,300 2,400 2,500 2,600 3,000 4,000 4,610

$415.95 Exhaust: Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System p4402721 4402716
Manufacturer: Hard Krome
Dennis Kirk Part #: 4402716
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System: Manufacturer part # p4402721 - DennisKirk Part # 4402716 - Mid-length designed pipes built for sound and to accentuate the rear portion of the bike. Outer pipe measures 2 1/2 inch in diameter; inner pipe is 1 3/4 inch diameter. End Cap/Hard Tips only fit Hard-Krome pipes w/Hardtips. Baffle is not removable. Customize with optional CNC-machined tapered (order 44-8258) or slash-cut (order 44-8255) or straight-cut (44-8252). , , Included Items: , (2) Drag pipes, (1) Mounting bracket, (4) 3/8 in.-16 x 3/4 in. Hex bolts, (4) 3/8 in. Lock washers, (4) 3/8 in. Flat washers, (2) 3/8 in.-16 nut plates, (2) 8mm-1.25 x 25mm Hex bolts, (2) 8mm Flat washers, (2) 8mm-1.25 Hex nuts, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. p4402721
1 on hand

More Info/Options for Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System p4402721 4402716

$437.95 Exhaust: Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System p4402721 4402797
Manufacturer: Hard Krome
Dennis Kirk Part #: 4402797
Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System: Manufacturer part # p4402721 - DennisKirk Part # 4402797 - Mid-length designed pipes built for sound and to accentuate the rear portion of the bike. Outer pipe measures 2 1/2 inch in diameter; inner pipe is 1 3/4 inch diameter. End Cap/Hard Tips only fit Hard-Krome pipes w/Hardtips. Baffle is not removable. Includes Boost Port technology. Boost Post is a cross-over system that connects two dual exhaust pipes together. Customize with optional CNC-machined tapered (order 44-8258) or slash-cut (order 44-8255) or straight-cut (44-8252), , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. p4402721
1 on hand

More Info/Options for Hard Krome 2 1/2 in. Stripper Straights without Hard-Tips Exhaust System p4402721 4402797

$612.95 Exhaust: Hard Krome 3 in. Big Straights with Hard-Tips p4402731
Manufacturer: Hard Krome
Dennis Kirk Part #: 4402727
Hard Krome 3 in. Big Straights with Hard-Tips : Manufacturer part # p4402731 - These pipes make a statement that bigger is better. Same style as pictured shown except it is black. Outside diameter measures 3 in. with a 1 3/4 in. inside diameter on most models. CNC-machined straight-cut Hard-Tips billet end caps included. Includes Boost Port technology - Boost Port is a cross-over system that connects two exhaust pipes together. Optional CNC-machined tapered (order 44-8256) or slash-cut (order 44-8253) Hard-Tips provide a custom look. To change sound and performance, optional perforated (order 44-8263) or straight-thru (order 44-8259) baffles can also be used). , , Included Items: , (2) Drag pipe, (1) Mounting bracket, (6) 3/8 in.-16 x 3/4 in. Hex bolts, (6) 3/8 in.-16 Square nuts, (6) 3/8 in. Lock plates, (6) 3/8 in. Flat washers. NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing. p4402731
1 on hand

More Info/Options for Hard Krome 3 in. Big Straights with Hard-Tips p4402731

$612.95 Exhaust: Hard Krome 3 in. Big Straights with Hard-Tips p4402731 4402746
Manufacturer: Hard Krome
Dennis Kirk Part #: 4402746
Hard Krome 3 in. Big Straights with Hard-Tips : Manufacturer part # p4402731 - DennisKirk Part # 4402746 - These pipes make a statement that bigger is better. Outside diameter measures 3 in. with a 1 3/4 in. inside diameter on most models. CNC-machined straight-cut Hard-Tips billet end caps included. Includes Boost Port technology - Boost Port is a cross-over system that connects two exhaust pipes together. Optional CNC-machined tapered (order 44-8256) or slash-cut (order 44-8253) Hard-Tips provide a custom look. To change sound and performance, optional perforated (order 44-8263) or straight-thru (order 44-8259) baffles can also be used. , , NOTE: , Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product, , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing. , , Included Items:. , 1. (2) 3" Big straights. , 2. (4) 8mm-1.25 x 25mm flange head bolts. , 3. (4) 3/8"-16 x 3/4" hex head bolts. , 4. (4) 3/8"-16 square nuts. , 5. (4) 3/8" lock washers. , 6. (4) 3/8" flat washers. , 7. (2) mounting brackets. , 8. (1) Exup servo mounting plate. , 9. (1) Servo valve. , 10. (2) 6mm-1.00 x 15mm socket head bolts. , 11. (2) 6mm flat washers. p4402731
1 on hand

More Info/Options for Hard Krome 3 in. Big Straights with Hard-Tips p4402731 4402746

$586.95 Exhaust: Hard Krome 3 in. Big Straights with Hard-Tips p4402731 4402730
Manufacturer: Hard Krome
Dennis Kirk Part #: 4402730
Hard Krome 3 in. Big Straights with Hard-Tips : Manufacturer part # p4402731 - DennisKirk Part # 4402730 - These pipes make a statement that bigger is better. Same style as pictured shown except it is black. Outside diameter measures 3 in. with a 1 3/4 in. inside diameter on most models. CNC-machined straight-cut Hard-Tips billet end caps included. Optional CNC-machined tapered (order 44-8256) or slash-cut (order 44-8253) Hard-Tips provide a custom look. To change sound and performance, optional perforated (order 44-8263) or straight-thru (order 44-8259) baffles can also be used). , , Included Items: , (2) Drag pipe, (1) Mounting bracket. NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing. p4402731
2 on hand

More Info/Options for Hard Krome 3 in. Big Straights with Hard-Tips p4402731 4402730

$586.95 Exhaust: Hard Krome 3 in. Big Straights with Hard-Tips p4402731 4402729
Manufacturer: Hard Krome
Dennis Kirk Part #: 4402729
Hard Krome 3 in. Big Straights with Hard-Tips : Manufacturer part # p4402731 - DennisKirk Part # 4402729 - These pipes make a statement that bigger is better. These pipes make a statement that bigger is better. Same style as pictured shown except it is black. Outside diameter measures 3 in. with a 1 3/4 in. inside diameter on most models. CNC-machined straight-cut Hard-Tips billet end caps included. Optional CNC-machined tapered (order 44-8256) or slash-cut (order 44-8253) Hard-Tips provide a custom look. To change sound and performance, optional perforated (order 44-8263) or straight-thru (order 44-8259) baffles can also be used). , , Included Items: , (2) Exhaust pipes, (1) Mounting bracket, (4) 3/8 in.-16 x 3/4 in. Hex bolts, (4) 3/8 in.-16 Nuts, (4) 3/8 in. Lock plates, (4) 3/8 in. Flat washers. NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing. p4402731
1 on hand

More Info/Options for Hard Krome 3 in. Big Straights with Hard-Tips p4402731 4402729

$586.95 Exhaust: Hard Krome 3 in. Big Straights with Hard-Tips p4402731 4402732
Manufacturer: Hard Krome
Dennis Kirk Part #: 4402732
Hard Krome 3 in. Big Straights with Hard-Tips : Manufacturer part # p4402731 - DennisKirk Part # 4402732 - These pipes make a statement that bigger is better. Same style as pictured shown except it is black. Outside diameter measures 3 in. with a 1 3/4 in. inside diameter on most models. CNC-machined straight-cut Hard-Tips billet end caps included. Optional CNC-machined tapered (order 44-8256) or slash-cut (order 44-8253) Hard-Tips provide a custom look. To change sound and performance, optional perforated (order 44-8263) or straight-thru (order 44-8259) baffles can also be used. , , Included Items: , (2) Drag pipes, (1) Mounting pipe, (4) 3/8 in.-16 x 3/4 in. Hex bolts, (4) 3/8 in.-16 Square nuts, (4) 3/8 in. Lock washers, (4) 3/8 in. Flat washers, (2) 10mm-1.25 x 30mm Socket head screws, (2) 10mm Flat washers, (2) 10mm-1.25 Nylock nuts. NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing. p4402731
1 on hand

More Info/Options for Hard Krome 3 in. Big Straights with Hard-Tips p4402731 4402732

$586.95 Exhaust: Hard Krome 3 in. Big Straights with Hard-Tips p4402731 4402790
Manufacturer: Hard Krome
Dennis Kirk Part #: 4402790
Hard Krome 3 in. Big Straights with Hard-Tips : Manufacturer part # p4402731 - DennisKirk Part # 4402790 - These pipes make a statement that bigger is better. Same style as pictured shown except it is black. Outside diameter measures 3 in. with a 1 3/4 in. inside diameter on most models. CNC-machined straight-cut Hard-Tips billet end caps included. Optional CNC-machined tapered (order 44-8256) or slash-cut (order 44-8253) Hard-Tips provide a custom look. To change sound and performance, optional perforated (order 44-8263) or straight-thru (order 44-8259) baffles can also be used. , , Included Items: , (2) Drag pipes, (1) Mounting Bracket, (4) 3/8 in.-16 x 3/4 in. Hex Bolts, (4) 3/8 in.-16 Square Nuts, (4) 3/8 in. Lock Washers, (4) 3/8 in. Flat Washers. NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing. p4402731
1 on hand

More Info/Options for Hard Krome 3 in. Big Straights with Hard-Tips p4402731 4402790

$586.95 Exhaust: Hard Krome 3 in. Big Straights with Hard-Tips p4402731 4402728
Manufacturer: Hard Krome
Dennis Kirk Part #: 4402728
Hard Krome 3 in. Big Straights with Hard-Tips : Manufacturer part # p4402731 - DennisKirk Part # 4402728 - These pipes make a statement that bigger is better. Same style as pictured shown except it is black. Outside diameter measures 3 in. with a 1 3/4 in. inside diameter on most models. CNC-machined straight-cut Hard-Tips billet end caps included. Optional CNC-machined tapered (order 44-8256) or slash-cut (order 44-8253) Hard-Tips provide a custom look. To change sound and performance, optional perforated (order 44-8263) or straight-thru (order 44-8259) baffles can also be used). , , Included Items: , (2) Drag pipe, (1) Mounting bracket, (4) 3/8 in.-16 x 3/4 in. Hex bolts, (4) 3/8 in. Lock plates, (4) 3/8 in. Flat washers, (4) 3/8 in.-16 Square nuts. NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing. p4402731
1 on hand

More Info/Options for Hard Krome 3 in. Big Straights with Hard-Tips p4402731 4402728

$586.95 Exhaust: Hard Krome 3 in. Big Straights with Hard-Tips p4402731 4402731
Manufacturer: Hard Krome
Dennis Kirk Part #: 4402731
Hard Krome 3 in. Big Straights with Hard-Tips : Manufacturer part # p4402731 - DennisKirk Part # 4402731 - These pipes make a statement that bigger is better. These pipes make a statement that bigger is better. Same style as pictured shown except it is black. Outside diameter measures 3 in. with a 1 3/4 in. inside diameter on most models. CNC-machined straight-cut Hard-Tips billet end caps included. Optional CNC-machined tapered (order 44-8256) or slash-cut (order 44-8253) Hard-Tips provide a custom look. To change sound and performance, optional perforated (order 44-8263) or straight-thru (order 44-8259) baffles can also be used. , , Included Items: , (2) Drag pipes, (1) Mounting bracket, (4) 3/8 in.-16 x 3/4 in. Hex bolts, (4) 3/8 in.-16 Square nuts, (4) 3/8 in. Lock washers, (4) 3/8 in. Flat washers. NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing. p4402731
1 on hand

More Info/Options for Hard Krome 3 in. Big Straights with Hard-Tips p4402731 4402731

$612.95 Exhaust: Hard Krome 3 in. Big Straights with Hard-Tips p4402731 4402784
Manufacturer: Hard Krome
Dennis Kirk Part #: 4402784
Hard Krome 3 in. Big Straights with Hard-Tips : Manufacturer part # p4402731 - DennisKirk Part # 4402784 - These pipes make a statement that bigger is better. Outside diameter measures 3 in. with a 1 3/4 in. inside diameter on most models. CNC-machined straight-cut Hard-Tips billet end caps included. Includes Boost Port technology - Boost Port is a cross-over system that connects two exhaust pipes together. Optional CNC-machined tapered (order 44-8256) or slash-cut (order 44-8253) Hard-Tips provide a custom look. To change sound and performance, optional perforated (order 44-8263) or straight-thru (order 44-8259) baffles can also be used. NOTE: , Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product, , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing. , , Included Items:. , 1. (2) Drag pipes. , 2. (2) Mounting brackets. , 3. (4) 3/8 in.-16 x 3/4 in. hex bolts. , 5. (4) 3/8 in. flat washers. , 6. (4) 3/8 in. lock washers. p4402731
1 on hand

More Info/Options for Hard Krome 3 in. Big Straights with Hard-Tips p4402731 4402784

$612.95 Exhaust: Hard Krome 3 in. Big Straights with Hard-Tips p4402731 4402805
Manufacturer: Hard Krome
Dennis Kirk Part #: 4402805
Hard Krome 3 in. Big Straights with Hard-Tips : Manufacturer part # p4402731 - DennisKirk Part # 4402805 - These pipes make a statement that bigger is better. Same style as pictured shown except it is black. Outside diameter measures 3 in. with a 1 3/4 in. inside diameter on most models. CNC-machined straight-cut Hard-Tips billet end caps included. Includes Boost Port technology - Boost Port is a cross-over system that connects two exhaust pipes together. Optional CNC-machined tapered (order 44-8256) or slash-cut (order 44-8253) Hard-Tips provide a custom look. To change sound and performance, optional perforated (order 44-8263) or straight-thru (order 44-8259) baffles can also be used. , , Included Items: , (2) Drag Pipes, (1) Mounting Bracket, (4) 3/8 in.-16 x 3/4 in. Hex Bolts, (4) 3/8 in.-16 Square Nuts, (4) 3/8 in. Flat Washers, (4) 3/8 in. Lock Washers, (2) 8mm-1.25 Hex Nuts, (2) 8mm Flat Washers NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing. p4402731
1 on hand

More Info/Options for Hard Krome 3 in. Big Straights with Hard-Tips p4402731 4402805

$612.95 Exhaust: Hard Krome 3 in. Big Straights with Hard-Tips p4402731 4402807
Manufacturer: Hard Krome
Dennis Kirk Part #: 4402807
Hard Krome 3 in. Big Straights with Hard-Tips : Manufacturer part # p4402731 - DennisKirk Part # 4402807 - These pipes make a statement that bigger is better. Same style as pictured shown except it is black. Outside diameter measures 3 in. with a 1 3/4 in. inside diameter on most models. CNC-machined straight-cut Hard-Tips billet end caps included. Optional CNC-machined tapered (order 44-8256) or slash-cut (order 44-8253) Hard-Tips provide a custom look. To change sound and performance, optional perforated (order 44-8263) or straight-thru (order 44-8259) baffles can also be used. NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing. , , Included Items:. , 1. (2) Drag pipes. , 2. (1) Mounting bracket. , 3. (4) 3/8 in.-16 x 3/4 in. hex head bolts. , 4. (4) 3/8 in.-16 square nuts. , 5. (4) 3/8 in. Flat washers. , 6. (4) 3/8 in. lock washers. p4402731
1 on hand

More Info/Options for Hard Krome 3 in. Big Straights with Hard-Tips p4402731 4402807

$586.95 Exhaust: Hard Krome 3 in. Big Straights with Hard-Tips p4402731 4402726
Manufacturer: Hard Krome
Dennis Kirk Part #: 4402726
Hard Krome 3 in. Big Straights with Hard-Tips : Manufacturer part # p4402731 - DennisKirk Part # 4402726 - These pipes make a statement that bigger is better. Same style as pictured shown except it is black. Outside diameter measures 3 in. with a 1 3/4 in. inside diameter on most models. CNC-machined straight-cut Hard-Tips billet end caps included. Optional CNC-machined tapered (order 44-8256) or slash-cut (order 44-8253) Hard-Tips provide a custom look. To change sound and performance, optional perforated (order 44-8263) or straight-thru (order 44-8259) baffles can also be used). , , Included Items: , (2) Drag pipe, (1) Mounting bracket, (4) 3/8 in.-16 x 3/4 in. Hex bolts, (4) 3/8 in.-16 Square nuts, (4) 3/8 in. Lock plates, (4) 3/8 in. Flat washers. NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing. p4402731
1 on hand

More Info/Options for Hard Krome 3 in. Big Straights with Hard-Tips p4402731 4402726