TopSellers

Moose Extended Lift Push Tube $193.95

Vance & Hines Dresser Dual Header Pipes 16729 $315.95

Motion Pro SyncPro Carburetor Tuner $104.99

Kuryakyn Wheel Chock 922 $184.99

Vance & Hines Big Radius Exhaust 26029 $559.95

Caliber Poly-Shield III Salt Shield 13401 $236.99

Parts Unlimited Large Universal Cover CS-1002 $75.95

Kuryakyn Condor Pit-Stop/Trailer Stop Wheel Chock 920 $249.99

Parts Unlimited Total Cover TC-1005 $132.95

Vance & Hines Straight Shot HS Slip-Ons 16819 $209.95

Vance & Hines Oval Slip-On Mufflers $409.99

Vance & Hines Big Shot Duals 17925 $564.95

Caliber LowPro Low Profile Wide 8 in. Trailer Guide and Protection System 13322 $

HJC Electric Shield $76.99

Battery Tender Battery Tender Jr. 12-Volt Model $30.99

BUB Rinehart 3 1/2 in. Slip-On Mufflers $549.95

Kuryakyn GranTour Bag 4141 $149.99

Vance & Hines Big Radius Exhaust 26003 $519.95

NGK Resistor Spark Plug BR9ES $2.60

JPS Blue Polyurethane Fuel Line $3.99

NGK Resistor Spark Plug BR8ES $6.80

HJC Universal Quick Release Buckle $7.99

RBI Inc Bearing OEM Standard No 62052RS $4.95

2 in, Bassani 2 in, 4 in, Bassani 4 in, Bassani 2 1, 25 in, Samson 10 in

$946.99 Exhaust: Caliber True-Dual Exhaust System FL-700 Manufacturer: Caliber Dennis Kirk Part #: H44095 Caliber True-Dual Exhaust System: Manufacturer part # FL-700 - The 4-step header design provides more than just good looks and great sound; it can boost power by as much as 25 percent. This system starts off at 1 3/4 in. at the port, then jumps to 1 7/8in., then 2 in. and finishes off in a 3 in. muffler. 3 in. mufflers feature engraved chrome billet end caps and two sets of patented, removable Varitech baffles (1 3/4 in. and 2 in. i.d.). Chrome 2 1/2 in. heat shields cover the entire header system and flow right into the mufflers for a smooth transition. Mounting hardware and instructions are included. Made in the U.S.A.. , , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. FL-700 2 on hand More Info/Options for Caliber True-Dual Exhaust System FL-700

$436.99 Exhaust: Samson Crossover Header Pipes for Dressers FL2-223 Manufacturer: Samson Dennis Kirk Part #: 4402000 Samson Crossover Header Pipes for Dressers: Manufacturer part # FL2-223 - Chrome-plated, heli-arc welded true dual-header system. Eliminate the scavange pipe, which allows the system to quickly move the exhaust gases; improves air flow and reduces heat on the right side. Heat shields, clamps and mounting brackets included. Crossover-style headers accept mufflers designed for use on OEM 95-08 pipes, such as Samson Rolled Thunder or Silver Bullet®. Must purchase mufflers separately. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. FL2-223 1 on hand More Info/Options for Samson Crossover Header Pipes for Dressers FL2-223

$797.99 Exhaust: Samson True Dual Exhaust System FL2-323 Manufacturer: Samson Dennis Kirk Part #: 4401403 Samson True Dual Exhaust System: Manufacturer part # FL2-323 - Full coverage heat shields are chrome. Baffles are integrated and non-removable. Include engraved billet end caps. Feature dual O2 sensor ports. Made in the U.S.A.. , NOTE: , For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 (except 08 Touring models), , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. FL2-323 1 on hand More Info/Options for Samson True Dual Exhaust System FL2-323

$797.99 Exhaust: Samson True Dark Duals for Dressers FL2-324 Manufacturer: Samson Dennis Kirk Part #: 4401405 Samson True Dark Duals for Dressers: Manufacturer part # FL2-324 - Full coverage heat shields are black. Baffles are integrated and non-removable. Include engraved billet end caps. Feature dual O2 sensor ports. Made in the U.S.A.. , NOTE: , For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 (except 08 Touring models), , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. FL2-324 1 on hand More Info/Options for Samson True Dark Duals for Dressers FL2-324

$797.99 Exhaust: Samson True Cholo Longtails Exhaust System FL2-435 Manufacturer: Samson Dennis Kirk Part #: 4401667 Samson True Cholo Longtails Exhaust System: Manufacturer part # FL2-435 - Full coverage heat shields are chrome. Baffles are integrated and non-removable. Include engraved billet end caps. Cholo Longtail has 39 in. Longtail mufflers. Made in the U.S.A.. , NOTE: , For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 (except 08 Touring models), , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. FL2-435 1 on hand More Info/Options for Samson True Cholo Longtails Exhaust System FL2-435

$946.99 Exhaust: Caliber True-Dual Exhaust System FL2-700 Manufacturer: Caliber Dennis Kirk Part #: 4401668 Caliber True-Dual Exhaust System: Manufacturer part # FL2-700 - The 4-step header design provides more than just good looks and great sound; it can boost power by as much as 25 percent. This system starts off at 1 3/4 in. at the port, then jumps to 1 7/8 in., then 2 in. and finishes off in a 3 in. muffler. 3 in. mufflers feature engraved chrome billet end caps and two sets of patented, removable Varitech baffles (1 3/4 in. and 2 in. i.d.). Chrome 2 1/2 in. heat shields cover the entire header system and flow right into the mufflers for a smooth transition. Mounting hardware and instructions are included). Dual O2 sensor ports accept OEM or aftermarket sensors; plugs are not included and are required on L85 -06 models. Made in the U.S.A.. , , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models (except 08 Touring models), , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. FL2-700 1 on hand More Info/Options for Caliber True-Dual Exhaust System FL2-700

$1044.99 Exhaust: Caliber True Dual Exhaust System with 3 1/2 in. Mufflers FL2-703 Manufacturer: Caliber Dennis Kirk Part #: 4402527 Caliber True Dual Exhaust System with 3 1/2 in. Mufflers: Manufacturer part # FL2-703 - Finished with Samson's Quad chrome for a deep, lasting shine. Increases gas mileage while producing more horsepower and torque. True Dual cross-over headers feature a four-step design starting at 1 3/4 in., swelling to 1 7/8 in., then 2 in. and finishing at a 3 1/2 in. muffler body (for 4 in. use 4402528). Full-coverage 2 1/2 in. heat shields merge smoothly with the mufflers. Chrome billet end caps adorn the mufflers. Mufflers feature removable Varitech baffles; optional high-performance baffles available separately (4402535). Dual O2 sensor ports accept OEM or aftermarket sensors; plugs are not included and are required on L85-06 models. C.A.R.B. approved. Made in the U.S.A.. , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , Included ItemsL, 1. (3) 5/16-18 x 1 in. hex head bolts, 2. (4) 5/16-18 x 3/4 in. hex head bolts, 3. (4) 5/16 in. split lock washer, 4. (3) 5/16 in. washer, 5. (3) Nylock nuts, 6. (2) 2 1/8 in. pinch clamps SP11-15, 7. (8) #24 hose clamps, 8. (1) 2 in. side clamp SP11-18. , 9. (2) 1/4 in.-20 button head screws, 10. (2) 10-32 button head screws. FL2-703 1 on hand More Info/Options for Caliber True Dual Exhaust System with 3 1/2 in. Mufflers FL2-703

$1044.99 Exhaust: Caliber True Dual Exhaust System w/4 in. Mufflers FL2-704 Manufacturer: Caliber Dennis Kirk Part #: 4402528 Caliber True Dual Exhaust System w/4 in. Mufflers: Manufacturer part # FL2-704 - Finished with Samson's Quad chrome for a deep, lasting shine. Increases gas mileage while producing more horsepower and torque. True Dual cross-over headers feature a four-step design starting at 1 3/4 in., swelling to 1 7/8 in., then 2 in. and finishing at a 4 in. muffler (for 3 1/2 in. use 4402527) body. Full-coverage 2 1/2 in. heat shields merge smoothly with the mufflers. Chrome billet end caps adorn the mufflers. Mufflers feature removable Varitech baffles; optional high-performance baffles available separately (4402536). Dual O2 sensor ports accept OEM or aftermarket sensors; plugs are not included and are required on L85-06 models. C.A.R.B. approved. Made in the U.S.A.. , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing, , Included Items:, 1. (3) 5/16-18 x 1 in. hex head bolts, 2. (3) 5/16-18 x 1/2 in. hex head bolts, 3. (4) 5/16 in. split lock washers, 4. (3) 5/16 in. washers, 5. (3) 5/16 in. nylock nuts, 6. (2) 2 1/8 in. pinch damps SP11-15, 7. (1) 2 in. side clamp SP11-18, 8. (6) # 24 hose clamps, 9. (2) Removeable baffles SP04-22, 10. (2) 1/4 in.-20 button head screws, 11. (2) 10-32 button head screws. FL2-704 1 on hand More Info/Options for Caliber True Dual Exhaust System w/4 in. Mufflers FL2-704

$441.99 Exhaust: Bassani Power Curve True-Dual Crossover Header Pipes FLH-211 Manufacturer: Bassani Dennis Kirk Part #: 4402444 Bassani Power Curve True-Dual Crossover Header Pipes: Manufacturer part # FLH-211 - Made from 16-gauge steel, finished in show-quality chrome and supplied with three custom-fit heat shields (reuse two existing heat shields). Direct bolt-on replacement for stock headpipes. Feature proper port angle and patented matched-length rear headpipe design that produces even performance from each cylinder. Offer improved low-end torque, appearance and an unmistakable exhaust tone. Crossover systems accept Bassani 4 in. mufflers listed or any 95-08 OEM-style mufflers (sold separately). Bassani 4 in. slip-on mufflers feature 16-gauge steel construction, removable flow-through baffles and show-chrome finish. Muffler Options , Megaphone w/billet end cap 80-88 in. - 4402453, Megaphone w/billet end cap 95+ in. - 4402454, Slant-Cut 80-88 in. - 4402457, Slant-Cut 95+ in. - 4402458, Scalloped slash-cut 80-88 in. - 4402459, Scalloped slash-cut 95+ in. - 4402460. , , Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See the Chems/Lubes section for products that will help to prevent or remove the blueing.. FLH-211 1 on hand More Info/Options for Bassani Power Curve True-Dual Crossover Header Pipes FLH-211

$446.99 Exhaust: Bassani Power Curve True-Dual Crossover Header Pipes FLH-211CL Manufacturer: Bassani Dennis Kirk Part #: 4402445 Bassani Power Curve True-Dual Crossover Header Pipes: Manufacturer part # FLH-211CL - Made from 16-gauge steel, finished in show-quality chrome and supplied with three custom-fit heat shields (reuse two existing heat shields). Direct bolt-on replacement for stock headpipes. Feature proper port angle and patented matched-length rear headpipe design that produces even performance from each cylinder. Offer improved low-end torque, appearance and an unmistakable exhaust tone. Crossover systems accept Bassani 4 in. mufflers listed or any 95-08 OEM-style mufflers (sold separately). Bassani 4 in. slip-on mufflers feature 16-gauge steel construction, removable flow-through baffles and show-chrome finish. Muffler Options , Megaphone w/billet end cap 80-88 in. - 4402453, Megaphone w/billet end cap 95+ in. - 4402454, Slant-Cut 80-88 in. - 4402457, Slant-Cut 95+ in. - 4402458, Scalloped slash-cut 80-88 in. - 4402459, Scalloped slash-cut 95+ in. - 4402460. , , Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See the Chems/Lubes section for products that will help to prevent or remove the blueing.. FLH-211CL 1 on hand More Info/Options for Bassani Power Curve True-Dual Crossover Header Pipes FLH-211CL

$441.99 Exhaust: Bassani 4 in. Scalloped Slash-Cut Slip-On Mufflers FLH-503S Manufacturer: Bassani Dennis Kirk Part #: 4402459 Bassani 4 in. Scalloped Slash-Cut Slip-On Mufflers: Manufacturer part # FLH-503S - 4 in. diameter slip-on mufflers feature 16-gauge steel construction, removable flow-through 2 in. baffles and show-chrome finish. Bolt to stock locations with supplied hardware. Sold in pairs. For use with 4402444 or 4402445 head pipes. , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing, , See lubrication products for products that will help prevent or remove blueing.. FLH-503S 1 on hand More Info/Options for Bassani 4 in. Scalloped Slash-Cut Slip-On Mufflers FLH-503S

$441.99 Exhaust: Bassani 4 in. Scalloped Slash-Cut Slip-On Mufflers FLH-503SL Manufacturer: Bassani Dennis Kirk Part #: 4402460 Bassani 4 in. Scalloped Slash-Cut Slip-On Mufflers : Manufacturer part # FLH-503SL - 4 in. diameter slip-on mufflers feature 16-gauge steel construction, removable flow-through 2 1/2 in. performance baffles and show-chrome finish. Bolt to stock locations with supplied hardware. Sold in pairs. For use with 4402444 or 4402445 head pipes. , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing, , See lubrication products for products that will help prevent or remove blueing.. FLH-503SL 2 on hand More Info/Options for Bassani 4 in. Scalloped Slash-Cut Slip-On Mufflers FLH-503SL

$408.99 Exhaust: Bassani 4 in. Slant-Cut Slip-On Mufflers w/2 in. Baffles FLH-509 Manufacturer: Bassani Dennis Kirk Part #: 4402457 Bassani 4 in. Slant-Cut Slip-On Mufflers w/2 in. Baffles: Manufacturer part # FLH-509 - 4" diameter slip-on mufflers feature 16-gauge steel construction, removable flow-through baffles and show-chrome finish. Bolt to stock locations with supplied hardware. Sold in pairs. For use with 4402444 or 4402445 head pipes. , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing, , See lubrication products for products that will help prevent or remove blueing.. FLH-509 1 on hand More Info/Options for Bassani 4 in. Slant-Cut Slip-On Mufflers w/2 in. Baffles FLH-509

$408.99 Exhaust: Bassani 4 in. Slant-Cut Slip-On Mufflers FLH-509L Manufacturer: Bassani Dennis Kirk Part #: 4402458 Bassani 4 in. Slant-Cut Slip-On Mufflers: Manufacturer part # FLH-509L - 4" diameter slip-on mufflers feature 16-gauge steel construction, removable flow-through 2 1/2 in. performance baffles and show-chrome finish. Bolt to stock locations with supplied hardware. Sold in pairs. For use with 4402444 or 4402445 head pipes. , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing, , See lubrication products for products that will help prevent or remove blueing.. FLH-509L 1 on hand More Info/Options for Bassani 4 in. Slant-Cut Slip-On Mufflers FLH-509L

$446.99 Exhaust: Bassani 4 in. Megaphone Slip-On Mufflers FLH-517 Manufacturer: Bassani Dennis Kirk Part #: 4402453 Bassani 4 in. Megaphone Slip-On Mufflers : Manufacturer part # FLH-517 - 4 in. diameter slip-on mufflers feature 16-gauge steel construction, removable flow-through 2 in. baffles and show-chrome finish. Bolt to stock locations with supplied hardware. Sold in pairs. Four use with 4402444 or 4402445 head pipes. , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. FLH-517 2 on hand More Info/Options for Bassani 4 in. Megaphone Slip-On Mufflers FLH-517

$446.99 Exhaust: Bassani 4 in. Megaphone Slip-On Mufflers FLH-517L Manufacturer: Bassani Dennis Kirk Part #: 4402454 Bassani 4 in. Megaphone Slip-On Mufflers : Manufacturer part # FLH-517L - 4 in. diameter slip-on mufflers feature 16-gauge steel construction, removable flow-through 2 1/2 in. performance baffles and show-chrome finish. Bolt to stock locations with supplied hardware. Sold in pairs. Four use with 4402444 or 4402445 head pipes. , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. FLH-517L 1 on hand