Hard Krome Res-Tec 3 in, Drag Pipe 47B-6070, Drag Pipe 47B-2035

This site contains about 138,282 documents.

View by:

Page: 1 600 700 800 900 1,000 1,100 1,200 1,300 1,400 1,500 1,510 1,520 1,530 1,540 1,550 1,560 1,570 1,580 1,584 1,585 1,586 1,587 1,588 1,589 1,590 1,591 1,592 1,593 1,594 1,595 1,596 1,597 1,598 1,599 1,600 1,601 1,602 1,603 1,604 1,605 1,606 1,607 1,608 1,609 1,610 1,611 1,612 1,613 1,620 1,630 1,640 1,650 1,660 1,670 1,680 1,690 1,700 1,800 1,900 2,000 2,100 2,200 2,300 2,400 2,500 3,000 4,000 4,610

$371.99 Exhaust: Vance & Hines Shortshots Staggered Exhaust System 47217
Manufacturer: Vance & Hines
Dennis Kirk Part #: 4402705
Vance & Hines Shortshots Staggered Exhaust System: Manufacturer part # 47217 - Vance & Hines brings you the short, fat, and straight-pipe appearance with twin slash-cut ends which has revolutionary blue-proof technology. An amazing value with high style and performance. 1 3/4 in. headpipes and 220 deg. coverage heat shields. Instructions, mounting hardware and removable baffles are included. Made in the U.S.A.. , , NOTE: , For optional quiet baffle order Part No. 44-9584, , There is no warranty on exhaust with any regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carb jetting, overheating, etc., and is not the result of defective manufacturing. Please see our Chems/Lubes section for products that help protect or remove blueing, , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. , , Included Items:. , 1. (1) Nylon cable tie. , 2. (2) Nut plates , 3. (2) #28 hose clamps. , 4. (3) 5/16" x 1 1/2" hex head bolts. , 5. (3) 5/16" flat washers. , 6. (4) 5/16" x 5/8" flange head bolts. , 7. (1) 11/16" x 9/16" spacer. , 8. (5) #20 hose clamps. , 9. (1) 398-P bracket. , 10. (1) Front head pipe. , 11. (1) Rear head pipe , 12. (1) Front heat shield. , 13.(1) Rear heat shield. 47217
6 on hand

More Info/Options for Vance & Hines Shortshots Staggered Exhaust System 47217

$378.99 Exhaust: Vance & Hines Shortshots Staggered Exhaust System 47219
Manufacturer: Vance & Hines
Dennis Kirk Part #: 4402648
Vance & Hines Shortshots Staggered Exhaust System: Manufacturer part # 47219 - Vance & Hines brings you the short, fat, and straight-pipe appearance with twin slash-cut ends which has revolutionary blue-proof technology. An amazing value with high style and performance. 1 3/4 in. headpipes and 220 deg. coverage heat shields. Instructions, mounting hardware and removable baffles are included. Made in the U.S.A.. , , NOTE: For optional quiet baffle order Part No. 44-9584, , There is no warranty on exhaust with any regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carb jetting, overheating, etc., and is not the result of defective manufacturing. Please see our Chems/Lubes section for products that help protect or remove blueing, , If using on 04-06 XL models, must purchase oxygen sensor port plugs (44-03276). 47219
More than 10 on hand

More Info/Options for Vance & Hines Shortshots Staggered Exhaust System 47219

$453.95 Exhaust: Cobra Shorts Hot Rod Speedster Exhaust System 4722
Manufacturer: Cobra
Dennis Kirk Part #: 449331
Cobra Shorts Hot Rod Speedster Exhaust System: Manufacturer part # 4722 - Tucked away behind those one-piece shields is the Cobra PowerPort, an engineering advancement that provides a performance increase similar to what you get form a 2-into-1 system. Cobra developed the PowerPort to increase power and to maintain overall rideability while remaining discreetly out of sight. And it does that while retaining all the great sound and style you expect from Cobra. Large 2 1/2 in., 222 degree, full-length heat shields fit from the exhaust ports to the billet tips for a seamless look and no blueing. Best fit and finish exhaust on the market. Easy installation. Made in the U.S.A., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 4722
1 on hand

More Info/Options for Cobra Shorts Hot Rod Speedster Exhaust System 4722

$378.99 Exhaust: Vance & Hines Shortshots Staggered Exhaust System 47221
Manufacturer: Vance & Hines
Dennis Kirk Part #: 4402641
Vance & Hines Shortshots Staggered Exhaust System: Manufacturer part # 47221 - Vance & Hines brings you the short, fat, and straight-pipe appearance with twin slash-cut ends which has revolutionary blue-proof technology. An amazing value with high style and performance. 1 3/4 in. headpipes and 220 deg. coverage heat shields. Instructions, mounting hardware and removable baffles are included. Made in the U.S.A.. 86-06 models require Oxygen sensor port plugs part number 4403276/LI>, , NOTE: , For optional quiet baffle order Part No. 44-9584, , There is no warranty on exhaust with any regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carb jetting, overheating, etc., and is not the result of defective manufacturing. Please see our Chems/Lubes section for products that help protect or remove blueing, , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. , , Included Items:. , 1. (1) Front head pipe. , 2. (1) Rear head pipe. , 3. (1) Front heat shield. , 4. (1) Rear heat shield. , 5. (1) 424-P bracket. , 6.(2) #28 hose clamps. , 7. (5) #20 hose clamps. , 8. (2) nut plates. , 9. (2) 3/8" x 3/4" flange bolts. , 10. (4) 5/16" x 5/8" flange bolts. , 11. (1) 3/8" x 2 1/2" allen bolt. , 12. (1) nylon cable tie. 47221
9 on hand

More Info/Options for Vance & Hines Shortshots Staggered Exhaust System 47221

$453.95 Exhaust: Cobra Shorts Hot Rod Speedster Exhaust System 4723
Manufacturer: Cobra
Dennis Kirk Part #: 449329
Cobra Shorts Hot Rod Speedster Exhaust System: Manufacturer part # 4723 - Tucked away behind those one-piece shields is the Cobra PowerPort, an engineering advancement that provides a performance increase similar to what you get form a 2-into-1 system. Cobra developed the PowerPort to increase power and to maintain overall rideability while remaining discreetly out of sight. And it does that while retaining all the great sound and style you expect from Cobra. Large 2 1/2 in., 222 degree, full-length heat shields fit from the exhaust ports to the billet tips for a seamless look and no blueing. Best fit and finish exhaust on the market. Easy installation. Made in the U.S.A., , Oxygen sensor eliminator part no.20-1032 is required for California and European models. ., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 4723
1 on hand

More Info/Options for Cobra Shorts Hot Rod Speedster Exhaust System 4723

$688.99 Exhaust: Vance & Hines Big Shot Duals 47925
Manufacturer: Vance & Hines
Dennis Kirk Part #: 4402643
Vance & Hines Big Shot Duals: Manufacturer part # 47925 - The complete package for late-model touring machines. Comes complete with 220 deg.wrap and 2 1/2 in. heat shields with blue-proof technology. 1 3/4 in. headpipes that flow into 2 1/8 in. muffler bodies are protected with heat shields. A clean and classic dresser look for both sides of your ride is supplied by a true 2-into-2 system that eliminates factory crossover. Create a classic Vance & Hines note with specially tuned baffles. Superior fit and an unrivalled finish when compared to other systems. Meticulously finished with straight-cut billet end caps. Optional distinctive Fishtaill II end caps or billet slash-cut end caps are available. Removable baffles and all mounting hardware included. Made in the U.S.A.. , , There is no warranty on exhaust with any regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carb jetting, overheating, etc., and is not cause by defective manufacturing. See Lubes/Chems section for products that help prevent or remove blueing. , , Included items:. , 1. (2) Mounting Bracket. , 2. (1) Left hand mounting bracket. , 3. (1) Right hand mounting bracket. , 4. (1) Front header. , 5. (1) Rear header. , 6. (1) Front heat shield. , 7. (1) Rear heat shield. 47925
2 on hand

More Info/Options for Vance & Hines Big Shot Duals 47925

$612.95 Exhaust: Hard Krome Res-Tec 3 in. Drag Pipe 47B-2035
Manufacturer: Hard Krome
Dennis Kirk Part #: 4401835
Hard Krome Res-Tec 3 in. Drag Pipe: Manufacturer part # 47B-2035 - 3" dia. mufflers constructed using RES-TEC (Reduced Exhaust Sound TEChnology) and patented True Doublewall Construction (U.S. Patent # 6,408,980). Features a stepped header design that progressively steps up from 1 3/4" to 1 7/8" to 2". Comes with a RES-TEC muffler cartridge to reduce exhaust sound while maintaining performance. Muffler cartridges are removable. Ceramic matte Black Star finish. Included Items: , (2) Drag Pipes, (2) Mounting Brackets, (4) 3/8 in. Square Nuts, (4) 3/8-16 x 3/4 in. Hex Head Bolts, (4) 3/8 in. Lock Washers, (4) 3/8 in. Flat Washers, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by warranty. 47B-2035
1 on hand

More Info/Options for Hard Krome Res-Tec 3 in. Drag Pipe 47B-2035

$612.95 Exhaust: Hard Krome Res-Tec 3 in. Drag Pipe 47B-2070
Manufacturer: Hard Krome
Dennis Kirk Part #: 4401836
Hard Krome Res-Tec 3 in. Drag Pipe: Manufacturer part # 47B-2070 - 3" dia. mufflers constructed using RES-TEC (Reduced Exhaust Sound TEChnology) and patented True Doublewall Construction (U.S. Patent # 6,408,980). Features a stepped header design that progressively steps up from 1 3/4" to 1 7/8" to 2". Comes with a RES-TEC muffler cartridge to reduce exhaust sound while maintaining performance. Muffler cartridges are removable. Ceramic matte Black Star finish. Included Items: , (1) Complete Exhaust System, (1) Support Bracket, (4) Square Nuts, (4) 3/8 in. x 1 in. Hex Bolts, (4) 3/8 in. Flat Washers, (4) 3/8 in. Lock Washers, (2) Rubber Bolt Caps, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by warranty. 47B-2070
2 on hand

More Info/Options for Hard Krome Res-Tec 3 in. Drag Pipe 47B-2070

$612.95 Exhaust: Hard Krome Res-Tec 3 in. Drag Pipe 47B-2080
Manufacturer: Hard Krome
Dennis Kirk Part #: 4401837
Hard Krome Res-Tec 3 in. Drag Pipe: Manufacturer part # 47B-2080 - 3" dia. mufflers constructed using RES-TEC (Reduced Exhaust Sound TEChnology) and patented True Doublewall Construction (U.S. Patent # 6,408,980). Features a stepped header design that progressively steps up from 1 3/4" to 1 7/8" to 2". Comes with a RES-TEC muffler cartridge to reduce exhaust sound while maintaining performance. , INCLUDED ITEMS: , (2) Head Pipes/Mufflers, (1) Support Bracket, (4) 3/8 in. x 1 in. Hex Bolts, (4) 3/8 in. Lock Washers, (4) 3/8 in. Flat Washers, (4) 3/8 in. Square Nuts, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by warranty. 47B-2080
1 on hand

More Info/Options for Hard Krome Res-Tec 3 in. Drag Pipe 47B-2080

$612.95 Exhaust: Hard Krome Res-Tec 3 in. Drag Pipe 47B-2090
Manufacturer: Hard Krome
Dennis Kirk Part #: 4401838
Hard Krome Res-Tec 3 in. Drag Pipe: Manufacturer part # 47B-2090 - 3" dia. mufflers constructed using RES-TEC (Reduced Exhaust Sound TEChnology) and patented True Doublewall Construction (U.S. Patent # 6,408,980). Features a stepped header design that progressively steps up from 1 3/4" to 1 7/8" to 2". Comes with a RES-TEC muffler cartridge to reduce exhaust sound while maintaining performance. Muffler cartridges are removable. Ceramic matte Black Star finish. , INCLUDED ITEMS: , (1) Complete Exhaust System, (1) Support Bracket, (4) 3/8 in. Square Nuts, (4) 3/8 in. x 1 in. Hex Bolts, (4) 3/8 in. Flat Washers, (4) 3/8 in. Lock Washers, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by warranty. 47B-2090
1 on hand

More Info/Options for Hard Krome Res-Tec 3 in. Drag Pipe 47B-2090

$612.95 Exhaust: Hard Krome Res-Tec 3 in. Drag Pipe 47B-4010
Manufacturer: Hard Krome
Dennis Kirk Part #: 4401839
Hard Krome Res-Tec 3 in. Drag Pipe: Manufacturer part # 47B-4010 - 3 inch dia. mufflers constructed using RES-TEC (Reduced Exhaust Sound TEChnology) and patented True Doublewall Construction (U.S. Patent # 6,408,980). Features a stepped header design that progressively steps up from 1 3/4 inch to 1 7/8 inch to 2 inch. Comes with a RES-TEC muffler cartridge to reduce exhaust sound while maintaining performance. Muffler cartridges are removable. Ceramic matte Black Star finish. Included Items: , (2) Drag Pipes, (1) Mounting Bracket, (4) 3/8 in. Square Nuts, (4) 3/8-16 x 3/4 in. Hex Head Bolts, (4) 3/8 in. Lock Washers, (4) 3/8 in. Flat Washers, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by warranty, NOTE: Will work on California models 2004-2005. 47B-4010
1 on hand

More Info/Options for Hard Krome Res-Tec 3 in. Drag Pipe 47B-4010

$612.95 Exhaust: Hard Krome Res-Tec 3 in. Drag Pipe 47B-4020
Manufacturer: Hard Krome
Dennis Kirk Part #: 4401840
Hard Krome Res-Tec 3 in. Drag Pipe: Manufacturer part # 47B-4020 - 3 inch dia. mufflers constructed using RES-TEC (Reduced Exhaust Sound TEChnology) and patented True Doublewall Construction (U.S. Patent # 6,408,980). Features a stepped header design that progressively steps up from 1 3/4 inch to 1 7/8 inch to 2 inch. Comes with a RES-TEC muffler cartridge to reduce exhaust sound while maintaining performance. Muffler cartridges are removable. ceramic matte Black Star finish, , Included Items: , (1) Front and Rear Headpipe, (1) Mounting Bracket, (4) 3/8-16 Hex Head Bolts, (4) 3/8-16 Square Nuts, (4) Flat Washers, (4) Lock Washers, (2) 8mm-1.25 Hex Head Bolts, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. 47B-4020
1 on hand

More Info/Options for Hard Krome Res-Tec 3 in. Drag Pipe 47B-4020

$612.95 Exhaust: Hard Krome Res-Tec 3 in. Drag Pipe 47B-4025
Manufacturer: Hard Krome
Dennis Kirk Part #: 4401841
Hard Krome Res-Tec 3 in. Drag Pipe: Manufacturer part # 47B-4025 - 3 inch dia. mufflers constructed using RES-TEC (Reduced Exhaust Sound TEChnology) and patented True Doublewall Construction (U.S. Patent # 6,408,980). Features a stepped header design that progressively steps up from 1 3/4 inch to 1 7/8 inch to 2 inch. Comes with a RES-TEC muffler cartridge to reduce exhaust sound while maintaining performance. Muffler cartridges are removable. Polished Chrome finish. , INCLUDED ITEMS: , (1) Complete Exhaust System, (1) Support Bracket, (4) Square Nuts, (4) 3/8 in. x 1 in. Hex Bolts, (4) 3/8 in. Flat Washers, (4) 3/8 in. Lock Washers, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by warranty. 47B-4025
1 on hand

More Info/Options for Hard Krome Res-Tec 3 in. Drag Pipe 47B-4025

$612.95 Exhaust: Hard Krome Res-Tec 3 in. Drag Pipe 47B-4040
Manufacturer: Hard Krome
Dennis Kirk Part #: 4401938
Hard Krome Res-Tec 3 in. Drag Pipe: Manufacturer part # 47B-4040 - 3 inch dia. mufflers constructed using RES-TEC (Reduced Exhaust Sound TEChnology) and patented True Doublewall Construction (U.S. Patent # 6,408,980). Features a stepped header design that progressively steps up from 1 3/4 inch to 1 7/8 inch to 2 inch. Comes with a RES-TEC muffler cartridge to reduce exhaust sound while maintaining performance. Muffler cartridges are removable. Polished Chrome finish. Included Items: , (2) Drag Pipes, (1) Mounting Bracket, (4) 3/8-16 x 3/4 in. Hex Bolts, (4) Square Nuts, (4) 3/8 in. Flat Washers, (4) 3/8 in. Lock Washers>, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 47B-4040
2 on hand

More Info/Options for Hard Krome Res-Tec 3 in. Drag Pipe 47B-4040

$612.95 Exhaust: Hard Krome Res-Tec 3 in. Drag Pipe 47B-4050
Manufacturer: Hard Krome
Dennis Kirk Part #: 4401842
Hard Krome Res-Tec 3 in. Drag Pipe: Manufacturer part # 47B-4050 - 3 inch dia. mufflers constructed using RES-TEC (Reduced Exhaust Sound TEChnology) and patented True Doublewall Construction (U.S. Patent # 6,408,980). Features a stepped header design that progressively steps up from 1 3/4 inch to 1 7/8 inch to 2 inch. Comes with a RES-TEC muffler cartridge to reduce exhaust sound while maintaining performance. Muffler cartridges are removable. Polished Chrome finish. Included Items. , 1. (2) Drag Pipes. , 2. (1) Mounting Bracket. , 3. (4) 3/8"-16 X 3/4" Hex Bolts. , 4. (2) 3/8"-16 X 1-1/4" Socket Head Bolts. , 5. (4) 3/8" Square Nuts. , 6. (2) 3/8" Nylock Nuts. , 7. (6) 3/8" Flat Washers. , 8. (6) 3/8" Lock Washers. , 9. (1) Instructions, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration. 47B-4050
2 on hand

More Info/Options for Hard Krome Res-Tec 3 in. Drag Pipe 47B-4050