Hard Krome 3 in, Hard Krome RES-TEC 3 in, Hard Krome Res-Tec 3 in

This site contains about 138,282 documents.

View by:

Page: 1 500 600 700 800 900 1,000 1,100 1,200 1,300 1,490 1,500 1,510 1,520 1,530 1,540 1,550 1,560 1,570 1,583 1,584 1,585 1,586 1,587 1,588 1,589 1,590 1,591 1,592 1,593 1,594 1,595 1,596 1,597 1,598 1,599 1,600 1,601 1,602 1,603 1,604 1,605 1,606 1,607 1,608 1,609 1,610 1,611 1,612 1,620 1,630 1,640 1,650 1,660 1,670 1,680 1,690 1,700 1,800 1,900 2,000 2,100 2,200 2,300 2,400 2,500 3,000 4,000 4,610

$160.99 Exhaust: Leo Vince ZX Hand-Made Scooter Exhaust 4579
Manufacturer: Leo Vince
Dennis Kirk Part #: 4403053
Leo Vince ZX Hand-Made Scooter Exhaust: Manufacturer part # 4579 - Open, double-expansion chamber design is 10/10mm stainless steel. Noise levels are kept acceptable with internal spaces covered with a sound-deadening material. Natural machined finish with a protective varnish coating or chrome finish on expansion chamber. Glossy carbon-fiber finish muffler sleeve. Include all necessary hardware for installation. E-approved, meet all European Standards requirements for road use. , INCLUDED ITEMS:, (1) Exhaust Pipe, (3) Mounting Brackets, (1) Head Gasket, (2) 8mm-1.25 x 25mm Hex Head Bolts, (4) 8mm-1.25 x 35mm Hex Head Bolts, (2) 8mm-1.25 Nuts, (3) Springs, (12) 15mm x 12mm Spacers, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturers directly with questions regarding modifications that may need to be made during, or after, installing their product, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore it is not covered by warranty.. 4579
1 on hand

More Info/Options for Leo Vince ZX Hand-Made Scooter Exhaust 4579

$662.99 Exhaust: Vance & Hines Sideshots System 46001
Manufacturer: Vance & Hines
Dennis Kirk Part #: 4402649
Vance & Hines Sideshots System: Manufacturer part # 46001 - Yet another marvel from the team at Vance & Hines. Feature twin slash-cut end caps for a truly custom look. System also features Power Chamber technology for big gains in horsepower and torque. Monster full-length 2 1/2" header pipe and muffler heat shield. Removable baffles. All mounting hardware included. Include mounts for factory 02 sensors. Made in the U.S.A.. , , Included Items:. , 1. (2) #28 Hose Clamps. , 2. (5) #20 Hose clamps. , 3. (4) 5/16" x 5/8" flange head bolts. , 4. (1)11/16" x 9/16" spacer. , 5. (2) Nut plates. , 6. (3) 5/16" x 1 1/2" hex head bolts. , 7. (3) 5/16" flat washers. , 8. (2) nylon cable ties.. 46001
3 on hand

More Info/Options for Vance & Hines Sideshots System 46001

$668.99 Exhaust: Vance & Hines Big Radius Exhaust System 46029
Manufacturer: Vance & Hines
Dennis Kirk Part #: 4402642
Vance & Hines Big Radius Exhaust System: Manufacturer part # 46029 - Big 2 1/2 in. full header and muffler heat shield system is virtually blue-proof. Scalloped end caps for a unique look. Removable baffles and mounting hardware included. Made in the U.S.A.. 02 sensor plug, part no. 4402703 required on 86-06 FXST/FLST listed models. NOTE: For optional left passenger peg relocation kit use part number 495315 NOTE: There is no warranty on exhaust pipes and mufflers with any regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing., , See our Chems/Lubes section to help prevent or remove blueing.. , , Included Items:. , 1. (1) Front head pipe. , 2. (1) Rear head pipe. , 3. (1) Front heat shield. , 4. (1) Rear heat shield. , 5. (1) Front muffler heat shield. , 6. (1) Rear muffler heat shield. , 7. (2) Chrome tips (installed). , 8. (1) Bracket. , 9. (2) Nut plates. , 10. (5) #20 hose clamps. , 11. (4) #28 hose clamps. , 12. (2) 3/8" x 3/4" flange bolts. , 13. (4) 5/16" x 5/8" flange bolts. , 14. (1) 3/8" x 2 1/2" allen bolt. , 15. (1) Nylon cable tie. 46029
4 on hand

More Info/Options for Vance & Hines Big Radius Exhaust System 46029

$603.99 Exhaust: Vance & Hines Sideshots System 46033
Manufacturer: Vance & Hines
Dennis Kirk Part #: 4402640
Vance & Hines Sideshots System: Manufacturer part # 46033 - Yet another marvel from the team at Vance & Hines. Feature twin slash-cut end caps for a truly custom look. System also features Power Chamber technology for big gains in horsepower and torque. Monster full-length 2 1/2" header pipe and muffler heat shield. Removable baffles. All mounting hardware included. Include mounts for factory 02 sensors. 86-06 models require Oxygen sensor port plugs part number 4403276. Made in the U.S.A.. , , Included Items:. , 1. (2) Nut plates. , 2. (5) #20 hose clamps. , 3. (2) #28 hose clamps. , 4. (2) 3/8" x 3/4" flange bolts. , 5. (4) 5/16" x 5/8" flange nuts. , 6. (1) 3/8"x 2 1/2" allen bolt. , 7. (1) Nylon cable tie.. 46033
2 on hand

More Info/Options for Vance & Hines Sideshots System 46033

$625.99 Exhaust: Vance & Hines Sideshots System 46035
Manufacturer: Vance & Hines
Dennis Kirk Part #: 4402647
Vance & Hines Sideshots System: Manufacturer part # 46035 - Yet another marvel from the team at Vance & Hines. Feature twin slash-cut end caps for a truly custom look. System also features Power Chamber technology for big gains in horsepower and torque. Monster full-length 2 1/2" header pipe and muffler heat shield. Removable baffles. All mounting hardware included. Include mounts for factory 02 sensors. Made in the U.S.A.. NOTE: 04-06 models require Oxygen sensor port plugs part number 4403276 NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product. If a jet kit or fuel processor is recommended, see the FUEL/INTAKE section NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor, jetting, overheating, etc., and is not caused by defective manufacturing. See CHEMS/LUBES section for products to prevent or remove blueing., , Included items:, 1. (1) 4 header assembly, 2. (1) Rear heat shield, 3. (4) 1.75" SS clamp for H.D., 4. (4) 5/16-18 x 5/8 serrated flange bolt, 5. (1) 3/8-16 x 1" hex head zinc plated grade 5 bolt, 6. (1) Fuelpak mini brochure. 46035
3 on hand

More Info/Options for Vance & Hines Sideshots System 46035

$371.95 Exhaust: Cobra Dragster Exhaust Systems 4618
Manufacturer: Cobra
Dennis Kirk Part #: 4400387
Cobra Dragster Exhaust Systems: Manufacturer part # 4618 - Maintains clean, pure traditional drag-pipe look. Full-length, 2.5 in. heat shields. 222 degrees wraparound for a non-bluing appearance. Beautifully machined and chromed billet tips. Removable baffles. Easy to install. Made in the U.S.A.. INCLUDED ITEMS: (1) front exhaust with heatshield. (1) rear exhaust with heatshield. (1) exhaust bracket. (4) HS-24 clamps. (2) HS-28 clamps. (4) 5/16 in.-18 x 5/8 in. hex bolts. (2) 1/4 in.-20 x 3/8 in. button screws. (2) billet muffler tips. (1) instruction sheet. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 4618
4 on hand

More Info/Options for Cobra Dragster Exhaust Systems 4618

$371.95 Exhaust: Cobra Dragster Exhaust Systems 4619
Manufacturer: Cobra
Dennis Kirk Part #: 4400279
Cobra Dragster Exhaust Systems: Manufacturer part # 4619 - Maintains clean, pure traditional drag-pipe look. Full-length, 2.5 in. heat shields. 222 degrees wraparound for a non-bluing appearance. Beautifully machined and chromed billet tips. Removable baffles. Easy to install. Made in the U.S.A., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 4619
2 on hand

More Info/Options for Cobra Dragster Exhaust Systems 4619

$371.95 Exhaust: Cobra Dragster Exhaust Systems 4622
Manufacturer: Cobra
Dennis Kirk Part #: 4400280
Cobra Dragster Exhaust Systems: Manufacturer part # 4622 - Maintains clean, pure traditional drag-pipe look. Full-length, 2.5 in. heat shields. 222 degrees wraparound for a non-bluing appearance. Beautifully machined and chromed billet tips. Removable baffles. Easy to install. Made in the U.S.A., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 4622
1 on hand

More Info/Options for Cobra Dragster Exhaust Systems 4622

$368.99 Exhaust: Vance & Hines Dresser Dual Header Pipes 46737
Manufacturer: Vance & Hines
Dennis Kirk Part #: 4402645
Vance & Hines Dresser Dual Header Pipes: Manufacturer part # 46737 - Now you can complete your touring model exhaust system with Dresser Duals. Whether you already have a set of Vance & Hines mufflers or are still running stock, Dresser Duals will give your exhaust system what it needs. , , Vance & Hines Dresser Dual exhaust give your motorcycle the traditional look you want and the performance only Vance & Hines can deliver. 2 1/8inch 220 degree full coverage heat shields make this a blue proof system, proprietary bends and 1 3/4inch head pipes give the sound and performance you want. Add a pair of Vance & Hines Ovals, or Basic Slash Cut mufflers, to build up one of the best-looking, best-performing exhaust systems available. And Vance & Hines quality is built in from the start to make Dresser Duals the head pipe of choice to run with any Vance & Hines or stock slip-on muffler. Includes mounts for factory O2 Sensors. , , Included Items:. , 1. (1) Front header dresser. , 2. (1) Rear header dresser. , 3. (1) Front heat shield. , 4. (1) Rear heat shield. , 5. (1) Powder coated rear bracket. , 6. (1) Powder coated front bracket. , 7. (1) Header tube clamp chromed. , 8. (3) 1.63"-1.88" T-bolt clamp No. 58V. , 9. (3) 1/2x1x3/16 flat washer. , 10. (1) Nylon cable tie 8"x.14".. 46737
3 on hand

More Info/Options for Vance & Hines Dresser Dual Header Pipes 46737

$634.95 Exhaust: Hard Krome RES-TEC 3 in. Drag Pipes 47-2035
Manufacturer: Hard Krome
Dennis Kirk Part #: 4401630
Hard Krome RES-TEC 3 in. Drag Pipes: Manufacturer part # 47-2035 - 3 in. diameter mufflers constructed using RES-TEC (Reduced Exhaust Sound TEChnology) and patented True Doublewall Construction (U.S. Patent # 6,408,980). Features a stepped header design that progressively steps up from 1 3/4 in. to 1 7/8 in. to 2 in.. Comes with a RES-TEC muffler cartridge to reduce exhaust sound while maintaining performance. Included Items: , (2) Drag Pipes, (2) Mounting Brackets, (4) 3/8 in. Square Nuts, (4) 3/8-16 x 3/4 in. Hex Head Bolts, (4) 3/8 in. Lock Washers, (4) 3/8 in. Flat Washers. 47-2035
1 on hand

More Info/Options for Hard Krome RES-TEC 3 in. Drag Pipes 47-2035

$634.95 Exhaust: Hard Krome Res-Tec 3 in. Drag Pipe 47-2070
Manufacturer: Hard Krome
Dennis Kirk Part #: 4401631
Hard Krome Res-Tec 3 in. Drag Pipe: Manufacturer part # 47-2070 - 3" dia. mufflers constructed using RES-TEC (Reduced Exhaust Sound TEChnology) and patented True Doublewall Construction (U.S. Patent # 6,408,980). Features a stepped header design that progressively steps up from 1 3/4" to 1 7/8" to 2". Comes with a RES-TEC muffler cartridge to reduce exhaust sound while maintaining performance. Muffler cartridges are removable. Ceramic matte Black Star finish. , , Included Items: , (2) Drag Pipes, (1) Mounting Bracket, (4) 3/8"-16 X 3/4" Hex Bolts, (4) 3/8" Square Nuts, (4) 3/8" Flat Washers, (4) 3/8" Lock Washers, (2) Rubber Caps, (1) Instructions>, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 47-2070
1 on hand

More Info/Options for Hard Krome Res-Tec 3 in. Drag Pipe 47-2070

$634.95 Exhaust: Hard Krome Res-Tec 3 in. Drag Pipe 47-2080
Manufacturer: Hard Krome
Dennis Kirk Part #: 4401632
Hard Krome Res-Tec 3 in. Drag Pipe: Manufacturer part # 47-2080 - 3" dia. mufflers constructed using RES-TEC (Reduced Exhaust Sound TEChnology) and patented True Doublewall Construction (U.S. Patent # 6,408,980). Features a stepped header design that progressively steps up from 1 3/4" to 1 7/8" to 2". Comes with a RES-TEC muffler cartridge to reduce exhaust sound while maintaining performance. Muffler cartridges are removable. Ceramic matte Black Star finish. Included Items: , (2) Drag Pipes, (1) Mounting Bracket, (4) 3/8-16 x 3/4 in. Hex Bolts, (4) Square Nuts, (4) 3/8 in. Flat Washers, (4) 3/8 in. Lock Washers, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by warranty. 47-2080
2 on hand

More Info/Options for Hard Krome Res-Tec 3 in. Drag Pipe 47-2080

$634.95 Exhaust: Hard Krome Res-Tec 3 in. Drag Pipe 47-2090
Manufacturer: Hard Krome
Dennis Kirk Part #: 4401633
Hard Krome Res-Tec 3 in. Drag Pipe: Manufacturer part # 47-2090 - 3" dia. mufflers constructed using RES-TEC (Reduced Exhaust Sound TEChnology) and patented True Doublewall Construction (U.S. Patent # 6,408,980). Features a stepped header design that progressively steps up from 1 3/4" to 1 7/8" to 2". Comes with a RES-TEC muffler cartridge to reduce exhaust sound while maintaining performance. Muffler cartridges are removable. Polished Chrome finish. Includes:, 2 - head pipes/mufflers, 1 - support bracket, 4 - 3/8 in. X 1 in. hex bolts, 4 - 3/8 in. lock washers, 4 - 3/8 in. flat washers, 4 - 3/ 8 in.square nuts>, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 47-2090
1 on hand

More Info/Options for Hard Krome Res-Tec 3 in. Drag Pipe 47-2090

$634.95 Exhaust: Hard Krome Res-Tec 3 in. Drag Pipe 47-4010
Manufacturer: Hard Krome
Dennis Kirk Part #: 4401634
Hard Krome Res-Tec 3 in. Drag Pipe: Manufacturer part # 47-4010 - 3 inch dia. mufflers constructed using RES-TEC (Reduced Exhaust Sound TEChnology) and patented True Doublewall Construction (U.S. Patent # 6,408,980). Features a stepped header design that progressively steps up from 1 3/4 inch to 1 7/8 inch to 2 inch. Comes with a RES-TEC muffler cartridge to reduce exhaust sound while maintaining performance. Muffler cartridges are removable. Polished Chrome finish. INCLUDED ITEMS: , (2) Drag Pipes, (1) Mounting Bracket, (1) 6mm-1.25 x 30mm Hex Head Bolt, (4) 3/8-16 x 3/4 in. Hex Bolts, (4) 3/8 in. Square Nuts, (4) 3/8 in. Flat Washers, (4) 3/8 in. Lock Washers, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by warranty, NOTE: Will work on California models 2004-2005. 47-4010
1 on hand

More Info/Options for Hard Krome Res-Tec 3 in. Drag Pipe 47-4010

$634.95 Exhaust: Hard Krome Res-Tec 3 in. Drag Pipe 47-4020
Manufacturer: Hard Krome
Dennis Kirk Part #: 4401635
Hard Krome Res-Tec 3 in. Drag Pipe: Manufacturer part # 47-4020 - 3 inch dia. mufflers constructed using RES-TEC (Reduced Exhaust Sound TEChnology) and patented True Doublewall Construction (U.S. Patent # 6,408,980). Features a stepped header design that progressively steps up from 1 3/4 inch to 1 7/8 inch to 2 inch. Comes with a RES-TEC muffler cartridge to reduce exhaust sound while maintaining performance. Muffler cartridges are removable. Polished Chrome finish>, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 47-4020
1 on hand

More Info/Options for Hard Krome Res-Tec 3 in. Drag Pipe 47-4020

$634.95 Exhaust: Hard Krome Res-Tec 3 in. Drag Pipe 47-4025
Manufacturer: Hard Krome
Dennis Kirk Part #: 4401636
Hard Krome Res-Tec 3 in. Drag Pipe: Manufacturer part # 47-4025 - 3 inch dia. mufflers constructed using RES-TEC (Reduced Exhaust Sound TEChnology) and patented True Doublewall Construction (U.S. Patent # 6,408,980). Features a stepped header design that progressively steps up from 1 3/4 inch to 1 7/8 inch to 2 inch. Comes with a RES-TEC muffler cartridge to reduce exhaust sound while maintaining performance. Muffler cartridges are removable. Polished Chrome finish. , INCLUDED ITEMS: , (2) Head Pipes/Mufflers, (1) Support Bracket, (4) 3/8 in. x 1 in. Hex Bolts, (4) 3/8 in. Lock Washers, (4) 3/8 in. Flat Washers, (4) 3/8 in. Square Nuts>, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 47-4025