2 in, Hard Krome 2-into-2 - 2 3, Supertrapp 2 in, Hard Krome 2 3, Cobra 2 in

This site contains about 138,282 documents.

View by:

Page: 1 500 600 700 800 900 1,000 1,100 1,200 1,300 1,490 1,500 1,510 1,520 1,530 1,540 1,550 1,560 1,570 1,580 1,581 1,582 1,583 1,584 1,585 1,586 1,587 1,588 1,589 1,590 1,591 1,592 1,593 1,594 1,595 1,596 1,597 1,598 1,599 1,600 1,601 1,602 1,603 1,604 1,605 1,606 1,607 1,608 1,609 1,610 1,620 1,630 1,640 1,650 1,660 1,670 1,680 1,690 1,700 1,800 1,900 2,000 2,100 2,200 2,300 2,400 2,500 3,000 4,000 4,610

$639.95 Exhaust: Python Mamba Duals Complete 41713
Manufacturer: Python
Dennis Kirk Part #: 4402652
Python Mamba Duals Complete : Manufacturer part # 41713 - The complete true duals touring solution with 100 percent nonblueing one-piece full-coverage heat shields for both head pipes and mufflers. Everything you need in one box makes this a true duals system. Slash-cut ends finish off the look and O2 sensor mounts are included. Replacement baffle use part number 4403493 or for optional quiet baffles also available - 431326. , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration., , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. , , Included Items:. , 1. (1) Front header dresser, 2. (1) Front heat shield, 3. (1) Powder coated rear bracket, 4. (1) Powder coated rear bracket, 5. (1) Header tube clamp chromed, 6. (2) 2.25" SS clamp for Big Shot Gold seal, 7. (4) 1/2 x 1 x 3/16 flat washer, 8. (4) 5/16-18 x 5/8 serrated flange bolt, 9. (2) Nylon cable tie 8 in. X .14 in., 10. (1) 41713 INS. Rev 1.0, 11. (1) Rear Header dresser, 12. (1) Rear heat shield, 13. (1) Powder coated rear bracket, 14. (1) Powder coated rear bracket, 15. (1) 1.63 in-1.88 in. T-bolt clamp, 16. (7) 1.75 in SS clamp for H.D., 17. (2) Dog bone nut plates, 18. (2) 1/2 in.-13 X 1-1/4 in. long SHCS-zinc, 19. (2) SS 1/4 in.-20 X 5/16 in. Button SOC/Cap screw. 41713
1 on hand

More Info/Options for Python Mamba Duals Complete 41713

$399.95 Exhaust: Python True Dual Headers 41715
Manufacturer: Python
Dennis Kirk Part #: 4402653
Python True Dual Headers: Manufacturer part # 41715 - Complete your touring bike exhaust system with True Duals. Whether your bike already has a set of Python mufflers or is still running stock, True Duals will dramatically cut down the heat the stock crossover system generates on the right side. 2 1/8 in. 220 degrees full-coverage heat shields make this a blue-proof system. 1 3/4 in. headpipes provide the sound and performance you want. Includes mounts for factory O2 sensors. , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration., , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. , , Included Items:, 1. (1) Front header dresser, 2. (1) Front heat shield, 3. (1) Powder coated rear bracket, 4. (1) Header tube clamp-chromed, 5. (8) 1.75 in. SS clamp for H.D., 6. (3) 1/2 X 1 X 3/16 in. flat washer, 7. (1) Rear header dresser, 8. (1) Rear heat shield, 9. (1) Powder coated rear bracket, 10. (3) 1.63 in.-1.88 in. T-bolt clamp, 11. (2) 1/2 in.-13 X 1-1/4 in. long SHCS-zinc, 12. (1) Nylon cable tie 8 in. X .14 in.. 41715
3 on hand

More Info/Options for Python True Dual Headers 41715

$586.95 Exhaust: Hard Krome 2 3/4 in. K2 with Hard-Tips Exhaust System 421-2815B
Manufacturer: Hard Krome
Dennis Kirk Part #: 449399
Hard Krome 2 3/4 in. K2 with Hard-Tips Exhaust System: Manufacturer part # 421-2815B - Feature patented True Doublewall Construction that prevents pipes from discoloring. Designed for the aggressive rider who is looking for performance with an edge. Pipes kick up for better ground clearance. Outer pipe measures 2 3/4 inch diameter for most models and comes with Hard-Tips billet end caps. Polished Chrome finish. Baffles are removable. , , NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture. Please consult the exhaust manufacturer directly with questions regarding any modifications that may be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section. , , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore is not covered ny any warranty - See Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 421-2815B
1 on hand

More Info/Options for Hard Krome 2 3/4 in. K2 with Hard-Tips Exhaust System 421-2815B

$586.95 Exhaust: Hard Krome 2-into-2 - 2 3/4 in. K2 with Hard-Tips Exhaust System 421-2890B
Manufacturer: Hard Krome
Dennis Kirk Part #: 449745
Hard Krome 2-into-2 - 2 3/4 in. K2 with Hard-Tips Exhaust System: Manufacturer part # 421-2890B - Feature patented True Doublewall Construction that prevents pipes from discoloring. Designed for the aggressive rider who is looking for performance with an edge. Pipes kick up for better ground clearance. Outer pipe measures 2 3/4" diameter and comes with Straight-Cut Hard-Tip billet end caps. Optional Hard-Tip end caps:, Taper Style - 4-8257, Slash-Cut - 44-8254. Removable baffles. Optional Straight-thru baffles - 44-8260. Replacement Spiral baffles - 448270. Polished chrome finish. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture. Please consult the exhaust manufacturer directly with questions regarding any modifications that may be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section. , , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore is not covered ny any warranty - See Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 421-2890B
2 on hand

More Info/Options for Hard Krome 2-into-2 - 2 3/4 in. K2 with Hard-Tips Exhaust System 421-2890B

$586.95 Exhaust: Hard Krome 2-into-2 - 2 3/4 in. K2 with Hard-Tips Exhaust System 421-2895B
Manufacturer: Hard Krome
Dennis Kirk Part #: 449430
Hard Krome 2-into-2 - 2 3/4 in. K2 with Hard-Tips Exhaust System: Manufacturer part # 421-2895B - Feature patented True Doublewall Construction that prevents pipes from discoloring. Designed for the aggressive rider who is looking for performance with an edge. Pipes kick up for better ground clearance. Outer pipe measures 2 3/4" diameter and comes with Straight-Cut Hard-Tip billet end caps. Optional Hard-Tip end caps:, Slash-Cut - 44-8254, Taper-Cut - 44-8257. Removable baffles. Optional Straight-thru baffles - 44-8260. Replacement Spiral baffles - 44-8270. Polished chrome finish. , , NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture. Please consult the exhaust manufacturer directly with questions regarding any modifications that may be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section. , , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore is not covered ny any warranty - See Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 421-2895B
1 on hand

More Info/Options for Hard Krome 2-into-2 - 2 3/4 in. K2 with Hard-Tips Exhaust System 421-2895B

$586.95 Exhaust: Hard Krome 2 3/4 in. K2 with Hard-Tips 2-into-2 Exhaust System 421-4025B
Manufacturer: Hard Krome
Dennis Kirk Part #: 4401645
Hard Krome 2 3/4 in. K2 with Hard-Tips 2-into-2 Exhaust System: Manufacturer part # 421-4025B - Feature patented True Doublewall Construction that prevents pipes from discoloring. Designed for the aggressive rider who is looking for performance with an edge. Pipes kick up for better ground clearance. Outer pipe measures 2 3/4 in. diameter and comes with straight-cut Hard-Tips billet end caps. Optional Hard-Tip End Caps:, Taper Style - 44-8257, Slash-Cut - 44-8254. Optional straight-thru baffles - 44-8260. Replacement standard spiral type baffles - 44-8270. Polished chrome finish. , , INCLUDED ITEMS: , (1) Complete Exhaust System, (2) Support Brackets, (4) Square Nuts, (5) 3/8 in. x 1 in. Hex Bolts, (4) 3/8 in. Flat Washers, (4) 3/8 in. Lock Washers, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture. Please consult the exhaust manufacturer directly with questions regarding any modifications that may be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section. , , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore is not covered ny any warranty. See Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 421-4025B
1 on hand

More Info/Options for Hard Krome 2 3/4 in. K2 with Hard-Tips 2-into-2 Exhaust System 421-4025B

$586.95 Exhaust: Hard Krome 2 3/4 in. K2 with Hard-Tips 2-into-2 Exhaust System 421-4840B
Manufacturer: Hard Krome
Dennis Kirk Part #: 449747
Hard Krome 2 3/4 in. K2 with Hard-Tips 2-into-2 Exhaust System: Manufacturer part # 421-4840B - Feature patented True Doublewall Construction that prevents pipes from discoloring. Designed for the aggressive rider who is looking for performance with an edge. Pipes kick up for better ground clearance. Outer pipe measures 2 3/4& in. diameter and comes with straight-cut Hard-Tips billet end caps. Optional Hard-Tip end caps:, Taper style - 44-8257, Slash-cut - 44-8254. Optional straight-thru baffles - 44-8260. Polished chrome finish. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture. Please consult the exhaust manufacturer directly with questions regarding any modifications that may be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section. , , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore is not covered ny any warranty - See Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 421-4840B
1 on hand

More Info/Options for Hard Krome 2 3/4 in. K2 with Hard-Tips 2-into-2 Exhaust System 421-4840B

$586.95 Exhaust: Hard Krome 2 3/4 in. K2 with Hard-Tips 2-into-2 Exhaust System 421-4870B
Manufacturer: Hard Krome
Dennis Kirk Part #: 449394
Hard Krome 2 3/4 in. K2 with Hard-Tips 2-into-2 Exhaust System: Manufacturer part # 421-4870B - Feature patented True Doublewall Construction that prevents pipes from discoloring. Designed for the aggressive rider who is looking for performance with an edge. Pipes kick up for better ground clearance. Outer pipe measures 2 3/4 in. diameter and comes with straight-cut Hard-Tips billet end caps. Optional CNC-machined Hard-Tip end caps:, Taper Syle - 44-8257, Slash-Cut - 44-8254 Replacement standard spiral type baffles - 44-8270. Polished chrome finish. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture. Please consult the exhaust manufacturer directly with questions regarding any modifications that may be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section. , , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore is not covered ny any warranty - See Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 421-4870B
1 on hand

More Info/Options for Hard Krome 2 3/4 in. K2 with Hard-Tips 2-into-2 Exhaust System 421-4870B

$612.95 Exhaust: Hard Krome 2 3/4 in. K2 with Hard-Tips 2-into-2 Exhaust System 421-4880B
Manufacturer: Hard Krome
Dennis Kirk Part #: 4400356
Hard Krome 2 3/4 in. K2 with Hard-Tips 2-into-2 Exhaust System: Manufacturer part # 421-4880B - Feature patented True Doublewall Construction that prevents pipes from discoloring. Designed for the aggressive rider who is looking for performance with an edge. Pipes kick up for better ground clearance. Outer pipe measures 2 3/4 in. diameter and comes with Straight-Cut Hard-Tip billet end caps. Optional CNC-machined Hard-Tip end caps:, Taper Style - 44- 8257, Slash-Cut - 44-8254. Optional straight-thru baffles - 44-8260. Replacement standard Spiral baffles - 44-8270. Polished chrome finish. Includes Boost Port technology - Boost Port is a cross-over system that connects two exhaust pipes together. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture. Please consult the exhaust manufacturer directly with questions regarding any modifications that may be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section. , , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore is not covered ny any warranty - See Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 421-4880B
1 on hand

More Info/Options for Hard Krome 2 3/4 in. K2 with Hard-Tips 2-into-2 Exhaust System 421-4880B

$586.95 Exhaust: Hard Krome 2 3/4 in. K2 with Hard-Tips 2-into-2 Exhaust System 421-8025B
Manufacturer: Hard Krome
Dennis Kirk Part #: 4401650
Hard Krome 2 3/4 in. K2 with Hard-Tips 2-into-2 Exhaust System: Manufacturer part # 421-8025B - Feature patented True Doublewall Construction that prevents pipes from discoloring. Designed for the aggressive rider who is looking for performance with an edge. Pipes kick up for better ground clearance. Outer pipe measures 2 3/4 in. diameter models and comes with Straight-cut Hard-Tips billet end caps. Optional Hard-Tip end caps:, Taper Style - 44-8257, Slash-Cut - 44-8254. Optional Straight-thru baffles - 44-8260. Replacement Spriral type baffles - 44-8270. Polished chrome finish. , , INCLUDED ITEMS: , (2) Drag Pipes, (2) Mounting Brackets, (4) 3/8-16 x 3/4 in. Hex Bolts, (4) 3/8 in. Square Nuts, (4) 3/8 in. Flat Washers, (4) 3/8 in. Lock Washers, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture. Please consult the exhaust manufacturer directly with questions regarding any modifications that may be made during, or after, installing their product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore is not covered ny any warranty. See Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 421-8025B
1 on hand

More Info/Options for Hard Krome 2 3/4 in. K2 with Hard-Tips 2-into-2 Exhaust System 421-8025B

$227.99 Exhaust: Mac 2-into-1 Chrome Megaphone Style Exhaust System 4210401
Manufacturer: Mac
Dennis Kirk Part #: 25561
Mac 2-into-1 Chrome Megaphone Style Exhaust System: Manufacturer part # 4210401 - Economical replacement exhaust systems for many popular twins. Increased performance and the sound of power. Retains all convenience features, including centerstand, oil filter and drain plug access. Durable, dual nickel, all-chrome finish with a chrome megaphone style muffler. Removable, all-steel baffles, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 4210401
2 on hand

More Info/Options for Mac 2-into-1 Chrome Megaphone Style Exhaust System 4210401

$284.99 Exhaust: Mac 3/1 Chrome Megaphone Exhaust System 4210402
Manufacturer: Mac
Dennis Kirk Part #: 25655
Mac 3/1 Chrome Megaphone Exhaust System: Manufacturer part # 4210402 - Replace those worn out or rusty mufflers with economical, chrome plated MAC system. Complete chrome systems for Honda CBX and Yamaha XS750/850, featuring centerstand retention, oil filter and drain plug access and removable baffles, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 4210402
2 on hand

More Info/Options for Mac 3/1 Chrome Megaphone Exhaust System 4210402

$182.99 Exhaust: Supertrapp 2 in. Inlet Universal Aluminum External Disc Muffler 422-20000
Manufacturer: Supertrapp
Dennis Kirk Part #: 43948
Supertrapp 2 in. Inlet Universal Aluminum External Disc Muffler: Manufacturer part # 422-20000 - Aluminum body universal muffler includes all items shown, including eight 4 in. diffuser discs, closed end cap, re-packable baffle core and a weld-on mounting tab. Approximately 13 in. long tip-to-tip without discs or end cap. 2" inlet size Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 422-20000
2 on hand

More Info/Options for Supertrapp 2 in. Inlet Universal Aluminum External Disc Muffler 422-20000

$182.99 Exhaust: Supertrapp 2 1/2 in. Inlet Universal Aluminum External Disc Muffler 422-25000
Manufacturer: Supertrapp
Dennis Kirk Part #: 43950
Supertrapp 2 1/2 in. Inlet Universal Aluminum External Disc Muffler: Manufacturer part # 422-25000 - Aluminum body universal muffler includes all items shown, including eight 4 in. diffuser discs, closed end cap, re-packable baffle core and a weld-on mounting tab. Approximately 13 in. long tip-to-tip without discs or end cap. 2 1/2 in. inlet size Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 422-25000
1 on hand

More Info/Options for Supertrapp 2 1/2 in. Inlet Universal Aluminum External Disc Muffler 422-25000

$287.99 Exhaust: Supertrapp 2 in. Inlet Universal Stainless Steel Internal Disc Muffler 425-20190
Manufacturer: Supertrapp
Dennis Kirk Part #: 430363
Supertrapp 2 in. Inlet Universal Stainless Steel Internal Disc Muffler: Manufacturer part # 425-20190 - Internal Disc Silencer for maximum power and minimal sound. Stainless steel silencer incorporates the 4 in. Supertrapp diffuser disc system inside muffler body. Adjusts easily with eight discs and open or closed end cap for total power, sound and jetting control. Unique body clamp mounting system makes installation simple. 2" inlet size Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 425-20190