Python3 Slash-Cut Exhaust System 41410

This site contains about 138,282 documents.

View by:

Page: 1 500 600 700 800 900 1,000 1,100 1,200 1,300 1,490 1,500 1,510 1,520 1,530 1,540 1,550 1,560 1,570 1,579 1,580 1,581 1,582 1,583 1,584 1,585 1,586 1,587 1,588 1,589 1,590 1,591 1,592 1,593 1,594 1,595 1,596 1,597 1,598 1,599 1,600 1,601 1,602 1,603 1,604 1,605 1,606 1,607 1,608 1,610 1,620 1,630 1,640 1,650 1,660 1,670 1,680 1,690 1,700 1,800 1,900 2,000 2,100 2,200 2,300 2,400 2,500 3,000 4,000 4,610

$170.99 Exhaust: Supertrapp 1 3/4 in. Inlet Universal Aluminum External Disc Muffler 412-17500
Manufacturer: Supertrapp
Dennis Kirk Part #: 43962
Supertrapp 1 3/4 in. Inlet Universal Aluminum External Disc Muffler: Manufacturer part # 412-17500 - Aluminum body universal muffler includes all items shown, including eight 4 in. diffuser discs, closed end cap, re-packable baffle core and a weld-on mounting tab. Approximately 13 in. long tip-to-tip without discs or end cap. 1 3/4" inlet size Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 412-17500
Expected Soon

More Info/Options for Supertrapp 1 3/4 in. Inlet Universal Aluminum External Disc Muffler 412-17500

$334.95 Exhaust: Python3 Tapered Exhaust System 41280
Manufacturer: Python3
Dennis Kirk Part #: H25600
Python3 Tapered Exhaust System: Manufacturer part # 41280 - The Python 3 by Drag Specialties is a completely re-engineered, quantum-leap forward in exhaust technology, function and style. Engineered to significantly crank up the output on stroker and other modified engines. Independent Dyno tests on an 89 in. modified Big Twin show an impressive 5% peak horsepower gain over even a Python II system. 1 3/4 in. equal-length header pipes flow into big 2 1/2 in. muffler bodies for maximum performance. Non-removable, free-flowing, heavy duty, fiberglass-wrapped baffles are engineered to give you that Big Block Sound reminiscent of years past. Deep, double-nickel chrome finish, polished to perfection on all sides, wraps around the entire system. Snakeskins heat shields let you dress up your system even further (sold separately - part no. H25-604). Made specifically for each model, Python 3 systems utilize OEM mounting flanges; all other necessary mounting hardware is included, except where noted. Designed, tested and manufactured in the U.S.A.. This system is a low-low system. , NOTE: , 00-06 models require H27-202 (chrome) or H27-203 (black) muffler supports, , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration., , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 41280
Expected Soon

More Info/Options for Python3 Tapered Exhaust System 41280

$229.95 Exhaust: Python3 Tapered Slip-On Mufflers 41293
Manufacturer: Python3
Dennis Kirk Part #: H44601
Python3 Tapered Slip-On Mufflers: Manufacturer part # 41293 - Now you can tap into the famous Python® 3 look and performance while still using your stock header pipes. Employs the exact same baffle as the Python® 3 full systems. An embossed Python® 3 logo can be found on each muffler. All necessary mounting brackets and instructions included. , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337, NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carb jetting, overheating etc., and is not caused by defective manufacturing. See Chems/Lubes for products that will help prevent or remove blueing., , NOTE: This will fit with Floorboards. 41293
Expected Soon

More Info/Options for Python3 Tapered Slip-On Mufflers 41293

$398.99 Exhaust: Leo Vince 4 Road Scooter Exhaust System 4132
Manufacturer: Leo Vince
Dennis Kirk Part #: 4401899
Leo Vince 4 Road Scooter Exhaust System: Manufacturer part # 4132 - Boosts horsepower and torque in 4-stroke scooter engines. TIG-welded AISI 304 stainless steel header pipes. Muffler sleeve is stainless steel. Interior of muffler is designed to enhance performance. E-approved, meets European Standards noise levels for road use. , NOTE: Fits Kymco Bet and Win 250 2004-2006, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective manufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 4132
1 on hand

More Info/Options for Leo Vince 4 Road Scooter Exhaust System 4132

$229.95 Exhaust: Python3 Slash-Cut Slip-On Mufflers 41383
Manufacturer: Python3
Dennis Kirk Part #: H44602
Python3 Slash-Cut Slip-On Mufflers: Manufacturer part # 41383 - Now you can tap into the famous Python® 3 look and performance while still using your stock header pipes. Employs the exact same baffle as the Python® 3 full systems. An embossed Python® 3 logo can be found on each muffler. All necessary mounting brackets and instructions included. , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337, , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 41383
Expected Soon

More Info/Options for Python3 Slash-Cut Slip-On Mufflers 41383

$229.95 Exhaust: Python Slash-Cut Slip-On Mufflers 41393
Manufacturer: Python
Dennis Kirk Part #: H44603
Python Slash-Cut Slip-On Mufflers: Manufacturer part # 41393 - Now you can tap into the famous Python® 3 look and performance while still using your stock header pipes. Employs the exact same baffle as the Python® 3 full systems. An embossed Python® 3 logo can be found on each muffler. All necessary mounting brackets and instructions included. , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337, , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , NOTE: Will fit with Floorboards. 41393
2 on hand

More Info/Options for Python Slash-Cut Slip-On Mufflers 41393

$334.95 Exhaust: Python3 Tapered Exhaust System 41395
Manufacturer: Python3
Dennis Kirk Part #: H25608
Python3 Tapered Exhaust System: Manufacturer part # 41395 - The Python 3 by Drag Specialties is a completely re-engineered, quantum-leap forward in exhaust technology, function and style. Engineered to significantly crank up the output on stroker and other modified engines. Independent Dyno tests on an 89 in. modified Big Twin show an impressive 5% peak horsepower gain over even a Python II system. 1 3/4 in. equal-length header pipes flow into big 2 1/2 in. muffler bodies for maximum performance. Non-removable, free-flowing, heavy duty, fiberglass-wrapped baffles are engineered to give you that Big Block Sound reminiscent of years past. Deep, double-nickel chrome finish, polished to perfection on all sides, wraps around the entire system. Snakeskins heat shields let you dress up your system even further (sold separately - part no. H25-610). Made specifically for each model, Python 3 systems utilize OEM mounting flanges; all other necessary mounting hardware is included, except where noted. Designed, tested and manufactured in the U.S.A.., , NOTE: 2003-05 Dyna models require exhaust flange kit Part No. H25-1325, , NOTES: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing, , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 41395
Expected Soon

More Info/Options for Python3 Tapered Exhaust System 41395

$249.95 Exhaust: Python Slash-Cut Slip-On Mufflers 41403
Manufacturer: Python
Dennis Kirk Part #: 4400114
Python Slash-Cut Slip-On Mufflers: Manufacturer part # 41403 - Now you can tap into the famous Python 3 look and performance while still using your stock header pipes. Employs the exact same baffle as the Python full systems. An embossed Python 3 logo can be found on each muffler. All necessary mounting brackets and instructions included, , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 41403
3 on hand

More Info/Options for Python Slash-Cut Slip-On Mufflers 41403

$334.95 Exhaust: Python3 Slash-Cut Exhaust System 41410
Manufacturer: Python3
Dennis Kirk Part #: H25612
Python3 Slash-Cut Exhaust System: Manufacturer part # 41410 - The Python 3 by Drag Specialties is a completely re-engineered, quantum-leap forward in exhaust technology, function and style. Engineered to significantly crank up the output on stroker and other modified engines. Independent Dyno tests on an 89 in. modified Big Twin show an impressive 5% peak horsepower gain over even a Python II system. 1 3/4 in. equal-length header pipes flow into big 2 1/2 in. muffler bodies for maximum performance. Non-removable, free-flowing, heavy duty, fiberglass-wrapped baffles are engineered to give you that Big Block Sound reminiscent of years past. Deep, double-nickel chrome finish, polished to perfection on all sides, wraps around the entire system. Snakeskins heat shields let you dress up your system even further (sold separately - part no. H25-613). Made specifically for each model, Python 3 systems utilize OEM mounting flanges; all other necessary mounting hardware is included, except where noted. Designed, tested and manufactured in the U.S.A.. , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See lubrication product pages in the Chems and Lubes section for products that will help prevent or remove blueing. 41410
Expected Soon

More Info/Options for Python3 Slash-Cut Exhaust System 41410

$334.95 Exhaust: Python3 Slash-Cut Exhaust System 41415
Manufacturer: Python3
Dennis Kirk Part #: H25601
Python3 Slash-Cut Exhaust System: Manufacturer part # 41415 - The Python 3 by Drag Specialties is a completely re-engineered, quantum-leap forward in exhaust technology, function and style. Engineered to significantly crank up the output on stroker and other modified engines. Independent Dyno tests on an 89 in. modified Big Twin show an impressive 5% peak horsepower gain over even a Python II system. 1 3/4 in. equal-length header pipes flow into big 2 1/2 in. muffler bodies for maximum performance. Non-removable, free-flowing, heavy duty, fiberglass-wrapped baffles are engineered to give you that Big Block Sound reminiscent of years past. Deep, double-nickel chrome finish, polished to perfection on all sides, wraps around the entire system. Snakeskins heat shields let you dress up your system even further (sold separately - part no. H25-604). Made specifically for each model, Python 3 systems utilize OEM mounting flanges; all other necessary mounting hardware is included, except where noted. Designed, tested and manufactured in the U.S.A.. Pictures as being a high-low system, but is a low-low system. , , NOTE: 2000-2006 models require H27-202 chrome or H27-203 black muffler support, , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration., , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing, , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 41415
1 on hand

More Info/Options for Python3 Slash-Cut Exhaust System 41415

$334.95 Exhaust: Python3 Slash-Cut Exhaust System 41420
Manufacturer: Python3
Dennis Kirk Part #: H25609
Python3 Slash-Cut Exhaust System: Manufacturer part # 41420 - The Python 3 by Drag Specialties is a completely re-engineered, quantum-leap forward in exhaust technology, function and style. Engineered to significantly crank up the output on stroker and other modified engines. Independent Dyno tests on an 89 in. modified Big Twin show an impressive 5% peak horsepower gain over even a Python II system. 1 3/4 in. equal-length header pipes flow into big 2 1/2 in. muffler bodies for maximum performance. Non-removable, free-flowing, heavy duty, fiberglass-wrapped baffles are engineered to give you that Big Block Sound reminiscent of years past. Deep, double-nickel chrome finish, polished to perfection on all sides, wraps around the entire system. Snakeskins heat shields let you dress up your system even further (sold separately - part no. H25-610). Made specifically for each model, Python 3 systems utilize OEM mounting flanges; all other necessary mounting hardware is included, except where noted. Designed, tested and manufactured in the U.S.A., , NOTE: 2003-05 Dyna models require exhaust flange kit Part No. H25-1325, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing. See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 41420
Expected Soon

More Info/Options for Python3 Slash-Cut Exhaust System 41420

$344.95 Exhaust: Python 3 1/2 in. Slip-On Mufflers 41501
Manufacturer: Python
Dennis Kirk Part #: H43223
Python 3 1/2 in. Slip-On Mufflers: Manufacturer part # 41501 - Maximum protection from heat discoloration. High-velocity shielded muffler cores (replacement core-4402276). Big time performance gains. Python logo on each muffler. Removable baffles. Concave-shape slash-cut end. Instructions and all mounting hardware included, , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 41501
5 on hand

More Info/Options for Python 3 1/2 in. Slip-On Mufflers 41501

$534.95 Exhaust: Python Staggered Duals Exhaust System 41503
Manufacturer: Python
Dennis Kirk Part #: 4400317
Python Staggered Duals Exhaust System: Manufacturer part # 41503 - Increase performance throughout your bikes entire rpm range. Subjected to the most stringent testing and development. Headpipes feature a big 1 3/4" flow into 2 1/4" muffler bodies. Every last drop of horsepower is squeezed out with the hidden crossover system; big performance, bigger sound. Full-coverage, full-length heat shields for a virtually blue-proof exhaust; add a 1/4" to pipes' size for a full 2 1/2" muffler body. Embossed Python logo on rear of pipe. Removable baffles for replacement baffles use part number 4403493. Include dual 02 sensor ports. For replacement heat shields order DK part nos: 4402070 - Front shield 4402071 - Rear shield. Include all necessary mounting hardware and instructions, Included Items: #28 Three hose clamps. #20 Five hose clamps. Two nut plates. One 6mm nylon lock. Two 10mm lock nuts. Two 1/2" washers. Two 10 x 30mm allen bolts. Four 5/16" x 5/8" flange head bolts. One 6 x 16mm flange bolt. Two 10 x 25mm button head allen bolt. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337. 41503
2 on hand

More Info/Options for Python Staggered Duals Exhaust System 41503

$364.95 Exhaust: Python 3 1/2 in. Round Slip-On Mufflers 41505
Manufacturer: Python
Dennis Kirk Part #: 4402417
Python 3 1/2 in. Round Slip-On Mufflers: Manufacturer part # 41505 - Maximum protection from heat discoloration. High-velocity shielded muffler cores (replacement core-4402276). Big-time performance gains. Python logo on each muffler. Removable baffles. Slash-cut ends. , Included Items: , 1. (1) Python dresser right hand muff, 2. (1) Python dresser left hand muff, 3. (2) 5/16-18 x 1 1/4 in. hex head zinc plated grade 5 bolt, 4. (2) HD muffler clamp chromed, 5. (2) 5/16-18 all metal loc nut, 6. (4) 5/16 SAE flat washer. 41505
1 on hand

More Info/Options for Python 3 1/2 in. Round Slip-On Mufflers 41505

$474.99 Exhaust: Leo Vince 4 Road Scooter Exhaust System 4151
Manufacturer: Leo Vince
Dennis Kirk Part #: 4401896
Leo Vince 4 Road Scooter Exhaust System: Manufacturer part # 4151 - Boosts horsepower and torque in 4-stroke scooter engines. TIG-welded AISI 304 stainless steel header pipes. Muffler sleeve is stainless steel. Interior of muffler is designed to enhance performance. E-approved, meets European Standards noise levels for road use, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 4151
1 on hand

More Info/Options for Leo Vince 4 Road Scooter Exhaust System 4151

$511.95 Exhaust: Python Staggered Duals Exhaust System 41601
Manufacturer: Python
Dennis Kirk Part #: H43222
Python Staggered Duals Exhaust System: Manufacturer part # 41601 - Increase performance throughout your bikes entire rpm range. Subjected to the most stringent testing and development. Headpipes feature a big 1 3/4 in. flow into 2 1/4 in. muffler bodies. Every last drop of horsepower is squeezed out with the hidden crossover system; big performance, bigger sound. Full-coverage, full-length heat shields for a virtually blue proof exhaust; add a 1/4 in. to pipes size for a full 2 1/2 in. muffler body. Repl. front heatshield - 44-01544. Repl.