Vance & Hines Longshots Exhaust System 17805

This site contains about 138,282 documents.

View by:

Page: 1 500 600 700 800 900 1,000 1,100 1,200 1,300 1,470 1,480 1,490 1,500 1,510 1,520 1,530 1,540 1,550 1,555 1,556 1,557 1,558 1,559 1,560 1,561 1,562 1,563 1,564 1,565 1,566 1,567 1,568 1,569 1,570 1,571 1,572 1,573 1,574 1,575 1,576 1,577 1,578 1,579 1,580 1,581 1,582 1,583 1,584 1,590 1,600 1,610 1,620 1,630 1,640 1,650 1,660 1,700 1,800 1,900 2,000 2,100 2,200 2,300 2,400 2,500 3,000 4,000 4,610

$453.95 Exhaust: Cobra Shorts Hot Rod Speedster Exhaust System 1730
Manufacturer: Cobra
Dennis Kirk Part #: 449325
Cobra Shorts Hot Rod Speedster Exhaust System: Manufacturer part # 1730 - Tucked away behind those one-piece shields is the Cobra PowerPort, an engineering advancement that provides a performance increase similar to what you get form a 2-into-1 system. Cobra developed the PowerPort to increase power and to maintain overall rideability while remaining discreetly out of sight. And it does that while retaining all the great sound and style you expect from Cobra. Large 2 1/2 in., 222 degree, full-length heat shields fit from the exhaust ports to the billet tips for a seamless look and no blueing. Best fit and finish exhaust on the market. Easy installation. Made in the U.S.A., , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty., , See Chems & Lubes section for products that will help prevent or remove blueing.. 1730
1 on hand

More Info/Options for Cobra Shorts Hot Rod Speedster Exhaust System 1730

$409.99 Exhaust: Vance & Hines 2-into-1 Pro Pipe HS Exhaust System 17521
Manufacturer: Vance & Hines
Dennis Kirk Part #: H25300
Vance & Hines 2-into-1 Pro Pipe HS Exhaust System: Manufacturer part # 17521 - 2-into-1 Pro-Pipes are the systems Byron Hines developed when Vance & Hines decided they wanted to make the absolute best-performing pipe on the market for Harley motors. Meticulous engineering - a hand-made race collector and specifically designed head pipes produce maximum scavenging of spent exhaust gasses, then a special baffle system provides just the right sound. The collector is virtually Blue-Proof with its own full coverage heatshield. True full-length 220 degree wrap heat shields on head pipes perfectly match the collectors heat shield. Removable baffle and all mounting hardware included. Made in the U.S.A.. Not for kickstart models. May not fit some models that have replacement driver floorboards. For replacement end cap order H44-339, replacement standard baffle order H44-335, for optional competition baffle order H44-718. , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration., , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 17521
2 on hand

More Info/Options for Vance & Hines 2-into-1 Pro Pipe HS Exhaust System 17521

$409.99 Exhaust: Vance & Hines 2-into-1 Pro Pipe HS Exhaust System 17523
Manufacturer: Vance & Hines
Dennis Kirk Part #: H25301
Vance & Hines 2-into-1 Pro Pipe HS Exhaust System: Manufacturer part # 17523 - 2-into-1 Pro-Pipes are the systems Byron Hines developed when Vance & Hines decided they wanted to make the absolute best-performing pipe on the market for Harley motors. Meticulous engineering - a hand-made race collector and specifically designed head pipes produce maximum scavenging of spent exhaust gasses, then a special baffle system provides just the right sound. The collector is virtually Blue-Proof with its own full coverage heatshield. True full-length 220 degree wrap heat shields on head pipes perfectly match the collectors heat shield. Removable baffle and all mounting hardware included. Made in the U.S.A.. May not fit some models that have optional driver floorboards. For replacement end cap use H44-339. For replacement standard baffle use H44-335, for optional competition baffle us H44-718. , , NOTES: . All Dyna 2003-05 applications must use exhaust flange kit #H25-1325, ,. Not for kick start models, ,. There is no warranty on exhaust pipes and mufflers with regard to any discoloration.Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing, , See lubrication products for products that will help prevent or remove blueing., ,. For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models. 17523
2 on hand

More Info/Options for Vance & Hines 2-into-1 Pro Pipe HS Exhaust System 17523

$540.95 Exhaust: Vance & Hines Stepped Drag Pipe 17527
Manufacturer: Vance & Hines
Dennis Kirk Part #: H44082
Vance & Hines Stepped Drag Pipe: Manufacturer part # 17527 - Only the company that has been racing motorcycles for over 20 years and winning, can bring you this quality craftsmanship and racing heritage. Free-flowing horsepower never looked or sounded so good. The Vance & Hines winning tradition continues with the proprietary bends and steps for increased horsepower and torque, delivering a deep, powerful growl. Full coverage chromed heat shields virtually eliminate bluing pipes. Unique three-step header pipe design. Mammoth 2 1/2 in. header pipe heat shields. Features 3 in. mufflers with billet end caps and removable baffles. All mounting hardware included. Made in the U.S.A., , For the best performance, a free-flowing air cleaner and carb re-jet kit or adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a speed's performance speedyflow air cleaner for most models. See 18-3336 for 93-99 EVO carb models or 18-3337 for all twin cam models , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 17527
1 on hand

More Info/Options for Vance & Hines Stepped Drag Pipe 17527

$435.99 Exhaust: Vance & Hines 2-into-1 Pro Pipe HS Exhaust System 17533
Manufacturer: Vance & Hines
Dennis Kirk Part #: H25302
Vance & Hines 2-into-1 Pro Pipe HS Exhaust System: Manufacturer part # 17533 - 2-into-1 Pro-Pipes are the systems Byron Hines developed when Vance & Hines decided they wanted to make the absolute best-performing pipe on the market for Harley motors. Meticulous engineering - a hand-made race collector and specifically designed head pipes produce maximum scavenging of spent exhaust gasses, then a special baffle system provides just the right sound. The collector is virtually Blue-Proof with its own full coverage heatshield. True full-length 220 degree wrap heat shields on head pipes perfectly match the collectors heat shield. Removable baffle and all mounting hardware included. Made in the U.S.A.. Not for kickstart models. May not fit some models that have optional driver floorboards. For replacement end cap order H44-339, replacement standard baffle order H44-335, for optoinal competition baffle order H44-718. , NOTE: , For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337, NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration., , Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 17533
1 on hand

More Info/Options for Vance & Hines 2-into-1 Pro Pipe HS Exhaust System 17533

$548.99 Exhaust: Vance & Hines Pro Rod 2-into-1 17535
Manufacturer: Vance & Hines
Dennis Kirk Part #: 4401514
Vance & Hines Pro Rod 2-into-1: Manufacturer part # 17535 - Conceived at the drag strip and delivered to the street. This 2-into-1 unleashes the roar of the 9,000 rpm Revolution motor. Pushes the muscle of the fastest machine bearing the bar and shield emblem to a higher level. Complete exhaust system integrates blue-proof technology with applications for all models in the VRSC family. Systems feature an eliptical muffler evocative of Vance & Hines performance-centered history. Include mounts for factory O2 sensor. Made in the U.S.A.. , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 17535
1 on hand

More Info/Options for Vance & Hines Pro Rod 2-into-1 17535

$558.99 Exhaust: Vance & Hines Pro Rod 2-into-1 17537
Manufacturer: Vance & Hines
Dennis Kirk Part #: 4401515
Vance & Hines Pro Rod 2-into-1: Manufacturer part # 17537 - Conceived at the drag strip and delivered to the street. This 2-into-1 unleashes the roar of the 9,000 rpm Revolution motor. Pushes the muscle of the fastest machine bearing the bar and shield emblem to a higher level. Complete exhaust system integrates blue-proof technology with applications for all models in the VRSC family. Systems feature an eliptical muffler evocative of Vance & Hines performance-centered history. Include mounts for factory O2 sensor. Made in the U.S.A.. , , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 17537
1 on hand

More Info/Options for Vance & Hines Pro Rod 2-into-1 17537

$487.99 Exhaust: Vance & Hines Pro-Pipe BP Exhaust System 17541
Manufacturer: Vance & Hines
Dennis Kirk Part #: 4401502
Vance & Hines Pro-Pipe BP Exhaust System: Manufacturer part # 17541 - A 100% blue-proof design makes this the most sought after 2-into-1 performance pipe for Harleys. Newly improved with the addition of blue-proof technology over the entire pipe.. With 2-1/8 in. header and collector heat shield and new full coverage megaphone heat shield, Pro Pipe BP carries on the heritage of track proven performance, now with a blue proof chrome finish. Includes mounts for factory O2 Sensors. Removable baffles. Made in the U.S.A.. Included Items:. , 1 (1) Softail HS BP 2-1 Header. , 2. (1) Rear Heat Shield. , 3. (1) 2006 Megaphone Clamp Chromed. , 4. (1) HD HS Megaphone Clamp Chromed. , 5. (1) Dog Bone Nut Plate. , 6. (2) 3/8-16 X3/4" Flange Bolt. , 7. (1)5/16-18 All Metal Loc Nut. , 8. (1) 3/16-18 2 1/2" Socket HD Cap Screw. , 9. 2.25" SS Clamp for Big Shot Gold Seal #H28SS. , 10. (1)17541 Instruction Rev 1. , 11. (1) Front Heat Shield. , 12. (1) HS Collector Heat Shield. , 13. (1) Powder Coaated bracket. , 14. (6) 1.75" SS Clamp for HD. , 15. (2) 5/16-18 X 5/8 Serrated Flange Bolt. , 16.(1) 5/16-18 X 1 1/4" Hex HD Zinc Plated Grade 5 Bolt. , 17. (2) 5/16 SAE Flat Washer. , 18. (2) 1.00-2.00" SS Hose Clamp No.24. , 19. (2) SS 1/4-20 X 1/2" Button Soc/Cap Screw. , 20. (1) Nylon Cable Tie 8" X .14". , , NOTE: For the best performance, A free-flowing air cleaner and adjustable fuel management system is recommended with this pipe. Dennis Kirk recommends a Speed's Performance speedyflow air cleaner for most models - See 18-3337 NOTE: There is no warranty on exhaust pipes and mufflers with any regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See our Chems/Lubes section to help prevent or remove blueing.. 17541
5 on hand

More Info/Options for Vance & Hines Pro-Pipe BP Exhaust System 17541

$459.99 Exhaust: Vance & Hines Pro-Pipe BP Exhaust System 17543
Manufacturer: Vance & Hines
Dennis Kirk Part #: 4401513
Vance & Hines Pro-Pipe BP Exhaust System: Manufacturer part # 17543 - A 100% blue-proof design makes this the most sought after 2-into-1 performance pipe for Harleys. Newly improved with the addition of blue-proof technology over the entire pipe.. With 2-1/8 in. header and collector heat shield and new full coverage megaphone heat shield, Pro Pipe BP carries on the heritage of track proven performance, now with a blue proof chrome finish. Includes mounts for factory O2 Sensors. Removable baffles. Made in the U.S.A.. There is no warranty on exhaust pipes and mufflers with any regard to discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See our Chems/Lubes section to help prevent or remove blueing.. 17543
2 on hand

More Info/Options for Vance & Hines Pro-Pipe BP Exhaust System 17543

$530.99 Exhaust: Vance & Hines Pro-Pipe BP Exhaust System 17545
Manufacturer: Vance & Hines
Dennis Kirk Part #: 4402555
Vance & Hines Pro-Pipe BP Exhaust System: Manufacturer part # 17545 - A 100% blue-proof design makes this the most sought after 2-into-1 performance pipe for Harleys. Newly improved with the addition of blue-proof technology over the entire pipe. With 2-1/8 in. header and collector heat shield and new full coverage megaphone heat shield, Pro Pipe BP carries on the heritage of track proven performance, now with a blue proof chrome finish. Removable baffles. Made in the U.S.A.. , , Included Items:. , 1. (1) Dresser 99-06 BP 2-1 header. , 2. (1) Rear heat shield. , 3. (1) 2007 megaphone heat shield. , 4. (1) Dresser 07 2-1 rear muffler , 5. (1) HD HS megaphone clamp chromed. , 6. (7) 1.75" SS clamp for H.D.. , 7. (2) 1.00-2.00 SS hose clamp No. 24. , 8. (1) 5/16-18 all metal loc nut. , 9. (1) Dog bone nut plate. , 10. (1) 2.25" SS clamp for Big Shot gold seal #H28SS. , 11. (1) 3/8-16 x 1" hex head zinc plated grade 5 bolt. , 12. (1) 3/8-16 zinc plated loc-nuts. , 13. (1) 17545 Inst. Rev 1.0. , 14. (1) Front heat shield. , 15. (1) HS collector heat shield. , 16. (Powder coated rear bracket. , 17. (1) Powder coated transmission bracket. , 18. (1) Header tube clamp chromed. , 19. (2) 5/16 SAE flat washer. , 20. (1) 5/16-18 x 1 1/4" hex HD zinc plated grade 5 bolt. , 21. (4) 1/2 x 1 x 3/16 flat washer. , 22. (2) 5/16-18 x 5/8 serrated flange bolt. , 23. (2) 1/2"-23 x 1 1/4" long SHCS-Zinc. , 24. (2) 3/8" flat washers. , 25. (2) SS 1/4-20 x 5/. " button soc/cap screw. 17545
2 on hand

More Info/Options for Vance & Hines Pro-Pipe BP Exhaust System 17545

$468.99 Exhaust: Vance & Hines Pro-Pipe BP Exhaust System 17549
Manufacturer: Vance & Hines
Dennis Kirk Part #: 4402065
Vance & Hines Pro-Pipe BP Exhaust System: Manufacturer part # 17549 - A 100% blue-proof design makes this the most sought after 2-into-1 performance pipe for Harleys. Newly improved with the addition of blue-proof technology over the entire pipe.. With 2-1/8 in. header and collector heat shield and new full coverage megaphone heat shield, Pro Pipe BP carries on the heritage of track proven performance, now with a blue proof chrome finish. Includes mounts for factory O2 Sensors. Removable baffles. Made in the U.S.A.. , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 17549
1 on hand

More Info/Options for Vance & Hines Pro-Pipe BP Exhaust System 17549

$574.99 Exhaust: Vance & Hines Pro Rod 2-into-1 17553
Manufacturer: Vance & Hines
Dennis Kirk Part #: 4402706
Vance & Hines Pro Rod 2-into-1: Manufacturer part # 17553 - Conceived at the drag strip and delivered to the street. This 2-into-1 unleashes the roar of the 9,000 rpm Revolution motor. Pushes the muscle of the fastest machine bearing the bar and shield emblem to a higher level. Complete exhaust system integrates blue-proof technology with applications for all models in the VRSC family. Systems feature an eliptical muffler evocative of Vance & Hines performance-centered history. Include mounts for factory O2 sensor. Made in the U.S.A.. , , Included Items:. , 1. (1) Streetrod 2-1 header. , 2. (1) Oval muffler casing V-rod. , 3. (1) Rear cylinder heat shield. , 4. (1) V-rod 2-1 muffler heat shield. , 5. (1) Powder coated rear bracket. , 6. (1) SS clamp for V-rod muffler HS. , 7. (2) Dog bone nut plates , 8. (2) 5/16-18 x 7/8 serrated flange bolt. , 9. (2) 5/16 SAE flat washers. , 10. (1) 17553 inst. rev 1.0. , 11. (1) Mid section. , 12. (1) Front cylinder heat shield. , 13. (1) Mid section heat shield. , 14. (1) V-rod 2-1 collector heat shield. , 15. (4) 2.25" SS clamp for Big Shot gold seal #H28SS. , 16. (6) 1.75" SS clamp for H.D.. , 17. (4) 5/16-18 x 5/8 serrated flange bolt. , 18. (2) 5/16-18 all metal loc nut. , 19. (2) 2.13"-2.31" T-bolt clamp n NO. 66.. 17553
1 on hand

More Info/Options for Vance & Hines Pro Rod 2-into-1 17553

$574.99 Exhaust: Vance & Hines Pro Rod 2-into-1 17555
Manufacturer: Vance & Hines
Dennis Kirk Part #: 4402707
Vance & Hines Pro Rod 2-into-1: Manufacturer part # 17555 - Conceived at the drag strip and delivered to the street. This 2-into-1 unleashes the roar of the 9,000 rpm Revolution motor. Pushes the muscle of the fastest machine bearing the bar and shield emblem to a higher level. Complete exhaust system integrates blue-proof technology with applications for all models in the VRSC family. Systems feature an eliptical muffler evocative of Vance & Hines performance-centered history. Include mounts for factory O2 sensor. Made in the U.S.A.. , , Included Items:. , 1. (1) Street 2-1 header. , 2. (1) Oval muffler casiing V-Rod. , 3. (1) Rear cyl heat shield. , 4. (1) V-Rod 2-1 muffler heat shield. , 5. (1) V-rod 2-1 muffler heat shield. , 6. (1) Powder coated rear bracket. , 7. (2) ST tube spacer .440" long. , 8. (2) SS clamp for V-rod muffler HS. , 9. (2) Dog bone nut plate. , 10. (2) 2.13"-2.31" T-bolt clmap No.66. , 11. (1) 8MM x 1.25 x 55mm SHCS zinc. , 12. (4) Washer zinc 8.4mm x 30mm. , 13. (2) M8-1.25 x 35mm SHCS zinc. , 14. (1) Mid section. , 15. (1) Front cyl heat shield. , 16. (1) Mid section heat shield. , 17. (1) V-rod 2-1 collector heat shield. , 18. (1) Powder coated rear bracket. , 19. (3) 2.25" SS clamp for Big Shit gold seal. , 20. (6) 1.75" SS clamp for H.D.. , 21. (4) 5/16-18 x 5/8 serrated flange bolt. , 22. (1) 8M-1.25 metal lock nut. , 23. (2) 9/16" ID x 1 1/16" OD grommet. , 24. (1) 17555 Inst. Rev 1.0.. 17555
1 on hand

More Info/Options for Vance & Hines Pro Rod 2-into-1 17555

$597.99 Exhaust: Supertrapp 2-into-1 Silent Series Straight Exhaust System 178-71454
Manufacturer: Supertrapp
Dennis Kirk Part #: 4402165
Supertrapp 2-into-1 Silent Series Straight Exhaust System: Manufacturer part # 178-71454 - Increase performance while maintaining near stock sound levels. Non-tunable straight body. Top-performing 2-into-1 headpipe. High-flow 2.5 in. collector. Core and packing is rebuildable. Includes heatshields. , , Included Items: , (1) 2-1 Exhaust System, (1) Exhaust Clamp, (6) Hose Clamps, (2) 3/8 in.-16 x 1 1/4 in. Hex Bolts, (2) 3/8 in. Flat Washers, (2) 3/8 in. Lock Washers, (2) 3/8 in. x 3/8 in. Spacer Washers, (2) 5/16 in.-18 x 3/4 in. Flange Bolts, , NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing.. 178-71454
1 on hand

More Info/Options for Supertrapp 2-into-1 Silent Series Straight Exhaust System 178-71454

$597.99 Exhaust: Supertrapp 2 into 1 Silent Series Straight Exhaust Systems for 250mm Wide Tires 178-71470
Manufacturer: Supertrapp
Dennis Kirk Part #: 4402166
Supertrapp 2 into 1 Silent Series Straight Exhaust Systems for 250mm Wide Tires: Manufacturer part # 178-71470 - Increase performance while maintaining near stock sound levels. Non-tunable straight body. Top-performing 2-into-1 headpipe. High-flow 2.5" collector. Core and packing is rebuildable. Includes heatshields and hardware. , , NOTE: , There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing)is the result of tuning characteristics, cam timing, carburetor jetting, overheating,etc. and is not caused by defective manufacturing., , See lubrication products for products that will help prevent or remove blueing., , Included Items:, 1. (1) 2-1 system, 2. (1) Exhaust clamp, 3. (6) Hose clamps. 178-71470
1 on hand

More Info/Options for Supertrapp 2 into 1 Silent Series Straight Exhaust Systems for 250mm Wide Tires 178-71470