BUB Slip-On Muffler 142010BB, Polished Aluminum Muffler Sleeve 14503

This site contains about 138,282 documents.

View by:

Page: 1 500 600 700 800 900 1,000 1,100 1,200 1,300 1,460 1,470 1,480 1,490 1,500 1,510 1,520 1,530 1,540 1,550 1,551 1,552 1,553 1,554 1,555 1,556 1,557 1,558 1,559 1,560 1,561 1,562 1,563 1,564 1,565 1,566 1,567 1,568 1,569 1,570 1,571 1,572 1,573 1,574 1,575 1,576 1,577 1,578 1,579 1,580 1,590 1,600 1,610 1,620 1,630 1,640 1,650 1,660 1,700 1,800 1,900 2,000 2,100 2,200 2,300 2,400 2,500 3,000 4,000 4,610

$759.99 Exhaust: Yoshimura TRC Dual Tri-Oval Bolt-On Mufflers w/Satin-Finish Titanium Muffler Sleeves 1416477
Manufacturer: Yoshimura
Dennis Kirk Part #: 4401331
Yoshimura TRC Dual Tri-Oval Bolt-On Mufflers w/Satin-Finish Titanium Muffler Sleeves: Manufacturer part # 1416477 - All the features of Yoshimura's race-winning TRC exhaust line now in a convenient slip-on package. The tri-oval muffler body design provides superior ground clearance and a unique exhaust note. A newly designed cone end cap features a vent system that dissipates unwanted heat from the exhaust tip; this results in increased performance. Available satin-finish titanium muffler sleeve. , NOTE: Dual Mufflers Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1416477
1 on hand

More Info/Options for Yoshimura TRC Dual Tri-Oval Bolt-On Mufflers w/Satin-Finish Titanium Muffler Sleeves 1416477

$452.95 Exhaust: BUB Big Willy Pipes 142004CG
Manufacturer: BUB
Dennis Kirk Part #: 449285
BUB Big Willy Pipes: Manufacturer part # 142004CG - Long, fat pipes feature oversized header and muffler bodies. Optimum flow without sacrificing torque. Plasma-cut full-length chrome heat shields included. 2 1/4 in. muffler bodies feature removable baffles. Mounting hardware and instructions included. NOTE: For Billet Slash-Cut End Caps which are sold separately order Part No. 44905, ,. This part will not fit 2004-05 California versions of this motorcycle. , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 142004CG
1 on hand

More Info/Options for BUB Big Willy Pipes 142004CG

$332.95 Exhaust: BUB Slip-On Muffler 142010BB
Manufacturer: BUB
Dennis Kirk Part #: 448715
BUB Slip-On Muffler: Manufacturer part # 142010BB - BUB has been manufacturing motorcycle exhaust pipes for over 27 years. They are dedicated to designing unique pipes that incorporate performance, quality and good looks Designed by Jeff Palheygyi; features an oversized megaphone shell with a slash-cut end. Finished with a chrome billet end cap that is removable to allow the addition or removal of fiberglass packing material. Laser-cut mounting bracket included; powder-coated to match the chassis. Additional bracket included to relocate the rear brake reservoir. Works with the stock header pipes. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 142010BB
1 on hand

More Info/Options for BUB Slip-On Muffler 142010BB

$452.95 Exhaust: BUB Big Willy Pipes 142015CG
Manufacturer: BUB
Dennis Kirk Part #: 430764
BUB Big Willy Pipes: Manufacturer part # 142015CG - Long, fat pipes feature oversized header and muffler bodies. Optimum flow without sacrificing torque. Plasma-cut full-length chrome heat shields included. 2 1/4 in. muffler bodies feature removable baffles. Mounting hardware and instructions included. NOTE: For Billet Slash-Cut End Caps which are sold separately order Part No. 44905, ,. Will not fit 2004-05 California version of this motorcycle , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 142015CG
2 on hand

More Info/Options for BUB Big Willy Pipes 142015CG

$469.95 Exhaust: BUB Sleepers Slip-On Mufflers 142020BB
Manufacturer: BUB
Dennis Kirk Part #: 430720
BUB Sleepers Slip-On Mufflers: Manufacturer part # 142020BB - Sleepers mufflers from BUB follow the same lines as the stock mufflers, but that is where the similarities end. Chrome end caps grace the ends of these beauties. Deep, throaty sound - as it should be, but not obnoxious. Baffles are removable so you can run them with or without packing. Half the weight of stock and increaced acceleration all more fun to your ride. Mounting hardware and instructions included. Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 142020BB
1 on hand

More Info/Options for BUB Sleepers Slip-On Mufflers 142020BB

$914.95 Exhaust: BUB 4-into-2 Exhaust System 142100BBG
Manufacturer: BUB
Dennis Kirk Part #: 4400072
BUB 4-into-2 Exhaust System: Manufacturer part # 142100BBG - Large-diameter free-flowing headers are utilized by the four-into-two header design. 2 1/4 in. diameter oversize heat shield is removable. Features Sleeper-style mufflers with chrome billet aluminum end caps. Optimum performance and a deep low-pitched sound are provided by the spiral louvered core baffles. Include removable baffles. Optional oversize baffles are sold separately. Amazing performance and sound, with significant weight savings is obtained by this outstanding system. NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installing their product., , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 142100BBG
1 on hand

More Info/Options for BUB 4-into-2 Exhaust System 142100BBG

$414.95 Exhaust: BUB Stubbies Drag Pipes 142119CG
Manufacturer: BUB
Dennis Kirk Part #: 4400071
BUB Stubbies Drag Pipes: Manufacturer part # 142119CG - Big sound and a bold look come from these short and fat 2 1/4 in. drag pipes. Any pipe blueing will be hidden by the full-coverage heat shields that run the complete length of the header pipe. Create a different look by removing the baffles and by rotating the billet end caps 90 degree. Made in the U.S.A, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 142119CG
1 on hand

More Info/Options for BUB Stubbies Drag Pipes 142119CG

$452.95 Exhaust: BUB Big Willy Pipes 142122CG
Manufacturer: BUB
Dennis Kirk Part #: 4400070
BUB Big Willy Pipes: Manufacturer part # 142122CG - Long, fat pipes feature oversized header and muffler bodies. Optimum flow without sacrificing torque. Plasma-cut full-length chrome heat shields included. 2 1/4 in. muffler bodies feature removable baffles. Mounting hardware and instructions included. NOTE: For Billet Slash-Cut End Caps which are sold separately order Part No. 44905, ,. This part fits all 50-state 06 versions of this motorcycle plus 04-05 California-only version , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 142122CG
3 on hand

More Info/Options for BUB Big Willy Pipes 142122CG

$835.99 Exhaust: Yoshimura TRC 4-into-1 Tri-Oval Exhaust System w/Stainless Steel Header Pipe & Polished Stainless Steel Muffler Sleeve 1425075
Manufacturer: Yoshimura
Dennis Kirk Part #: 4401979
Yoshimura TRC 4-into-1 Tri-Oval Exhaust System w/Stainless Steel Header Pipe & Polished Stainless Steel Muffler Sleeve: Manufacturer part # 1425075 - Yoshimura's newest championship-winning exhaust system. The tri-oval muffler body design provides superior ground clearance and a unique exhaust note. Cone end caps new design features a ventilation system that dissipates unwanted heat from the exhaust tip, which results in increased performance. Header and midpipe feature durable, MIG-welded stainless steel construction. Quick-release muffler is made of polished stainless steel. , , Included Items: , (1) Yoshimura Muffler Assembly, (1) Stainless Steel Muffler Clamp, (12) Medium Race Exhaust Spring, (1) Tailpipe, (1) Header, (4) Stainless Steel Manifold, (4) Aluminum Flange, (1) Muffler Clamps Heat Insulator, (1) Spring Puller Tool, (1) Yoshimura Vinyl Sticker, , NOTE: 4-into 1 design with muffler on the right side, , NOTE: Installation of a new exhaust system may change a motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding modifications that may need to be made during, or after, installing thier product. If a jet kit or Power Commander is recommended, see the Intake/Fuel section, NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing, therefore it is not covered by any warranty. See the Chems/Lubes section for products to help prevent or remove discoloration.. 1425075
1 on hand

More Info/Options for Yoshimura TRC 4-into-1 Tri-Oval Exhaust System w/Stainless Steel Header Pipe & Polished Stainless Steel Muffler Sleeve 1425075

$948.99 Exhaust: Yoshimura TRC Dual Tri-Oval Slip-On Mufflers w/Glossy Carbon Fiber Muffler Sleeve 1425272
Manufacturer: Yoshimura
Dennis Kirk Part #: 4401980
Yoshimura TRC Dual Tri-Oval Slip-On Mufflers w/Glossy Carbon Fiber Muffler Sleeve: Manufacturer part # 1425272 - All the features of Yoshimura's race-winning TRC exhaust line now in a convenient slip-on package. The tri-oval muffler body design provides superior ground clearance and a unique exhaust note. A newly designed cone end cap features a vent system that dissipates unwanted heat from the exhaust tip; this results in increased performance. Glossy carbon fiber muffler sleeve with carbon fiber cone end cap. , , NOTE: Dual Mufflers , , Included Items: . Right side muffler assembly with carbon fiber sleeve Left side muffler assembly with carbon fiber sleeve Three stainless steel muffler clamps Four medium race exhaust springs Right side tailpipe Left side tailpipe securing rivet Two stainless steel exhaust clamps M8 X 55 bolt Two Yoshimura vinyl stickers Two muffler clamp heat insulators Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1425272
1 on hand

More Info/Options for Yoshimura TRC Dual Tri-Oval Slip-On Mufflers w/Glossy Carbon Fiber Muffler Sleeve 1425272

$710.99 Exhaust: Yoshimura TRC Dual Tri-Oval Slip-On Muffler with Polished Stainless Steel Muffler Sleeve 1425275
Manufacturer: Yoshimura
Dennis Kirk Part #: 4401981
Yoshimura TRC Dual Tri-Oval Slip-On Muffler with Polished Stainless Steel Muffler Sleeve: Manufacturer part # 1425275 - All the features of Yoshimura's race-winning TRC exhaust line now in a convenient slip-on package. The tri-oval muffler body design provides superior ground clearance and a unique exhaust note. A newly designed cone end cap features a vent system that dissipates unwanted heat from the exhaust tip; this results in increased performance. Polished stainless steel. , , NOTE: Dual Mufflers. , , Included Items: . Right side muffler assembly with stainless steel sleeve Left side muffler assembly with stainless steel sleeve Three stainless steel muffler clamps Four medium race exhaust springs Right side tailpipe Left side tailpipe securing rivet Two stainless steel exhaust clamps M8 X 55 bolt Two Yoshimura vinyl stickers Two muffler clamp heat insulators Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1425275
1 on hand

More Info/Options for Yoshimura TRC Dual Tri-Oval Slip-On Muffler with Polished Stainless Steel Muffler Sleeve 1425275

$854.99 Exhaust: Yoshimura TRC Dual Tri-Oval Slip-On Mufflers w/Satin-Finish Titanium Muffler Sleeves 1425277
Manufacturer: Yoshimura
Dennis Kirk Part #: 4401982
Yoshimura TRC Dual Tri-Oval Slip-On Mufflers w/Satin-Finish Titanium Muffler Sleeves: Manufacturer part # 1425277 - All the features of Yoshimura's race-winning TRC exhaust line now in a convenient slip-on package. The tri-oval muffler body design provides superior ground clearance and a unique exhaust note. A newly designed cone end cap features a vent system that dissipates unwanted heat from the exhaust tip; this results in increased performance. Satin-finish titanium muffler sleeve. , , NOTE: Dual Mufflers. , , Included Items: . Right side muffler assembly with titanium sleeve Left side muffler assembly with titanium sleeve Three stainless steel muffler clamps Four medium race exhaust springs Right side tailpipe Left side tailpipe securing rivet Two stainless steel exhaust clamps M8 X 55 bolt Two Yoshimura vinyl stickers Two muffler clamp heat insulators Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available. Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. See the Chems/Lubes section for products to help remove or prevent exhaust discoloration.. 1425277
1 on hand

More Info/Options for Yoshimura TRC Dual Tri-Oval Slip-On Mufflers w/Satin-Finish Titanium Muffler Sleeves 1425277

$629.95 Exhaust: BUB Jug Hugger Exhaust System 143000CG
Manufacturer: BUB
Dennis Kirk Part #: 4401698
BUB Jug Hugger Exhaust System: Manufacturer part # 143000CG - Turndown exhaust systems feature stepped headers for optimum airflow and performance. 2 1/2" full-coverage heat shields. Include a new baffle chamber design that lets you adjust back pressure, airflow and sound levels. Removable high-flow baffles make the most torque of any ever tested by BUB. Optional chrome billet end caps available separately, , Included Items: , 1. (1) Front Pipe, 2. (1) Rear Pipe, 3. (1) Front Heat Shield, 4. (1) Rear Heat Shield, 5. (1) Mounting Bracket, 6. (2) .500 Spacers, 7. (2) .375 Spacers, 8. (2) M10 x 1.25 x 40mm Bolts, 9. (2) M10 x 1.25 x 30mm Bolts, 10. (4) 5/16-18 x 7/8" Hex Bolts, 11. (4) 5/16-18 Nylock Nuts, 12. (4) 5/16 Flat Washers, 13. (9) Heat Shield Clamps (#28), 14. (1) Zip-Tie, 15. (1) Instructions , , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product, NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty. 143000CG
1 on hand

More Info/Options for BUB Jug Hugger Exhaust System 143000CG

$452.95 Exhaust: BUB Big Willy Exhaust System 143001CG
Manufacturer: BUB
Dennis Kirk Part #: 4401699
BUB Big Willy Exhaust System: Manufacturer part # 143001CG - Long, fat pipes feature oversized header and muffler bodies. Optimum flow without sacrificing torque. Plasma-cut full-length chrome heat shields included. 2 1/4" muffler bodies feature removable baffles. Mounting hardware and instructions included. Optional billet slash-cut end caps available separately, , Included Items: , 1. (1) Front Pipe, 2. (1) Rear Pipe, 3. (1) Front Heat Shield, 4. (1) Rear Heat Shield, 5. (1) Mounting Bracket, 6. (2) .500 Spacers, 7. (2) .375 Spacers, 8. (2) M10 x 1.25 x 40mm Bolts, 9. (2) M8 x 1.25 x 30mm Bolts, 10. (4) 5/16-18 x 7/8" Hex Bolts, 11. (4) 5/16-18 Nylock Nuts, 12. (4) 5/16 Washers, 13. (6) Shield Clamps, 14. (1) Zip-tie, 15. (1) Instructions. , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product., NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It is not the result of defective manufacturing; therefore it is not covered by any warranty.. 143001CG
1 on hand

More Info/Options for BUB Big Willy Exhaust System 143001CG

$452.95 Exhaust: BUB Big Willy Exhaust System 143002CG
Manufacturer: BUB
Dennis Kirk Part #: 4401700
BUB Big Willy Exhaust System: Manufacturer part # 143002CG - Long, fat pipes feature oversized header and muffler bodies. Optimum flow without sacrificing torque. Plasma-cut full-length chrome heat shields included. 2 1/4" muffler bodies feature removable baffles. Optional billet slash-cut end caps available separately. Included Items . , 1. (2) Flange Nut 8MM. , 2. (4) 5/16"-18X3/4" Hex Bolt. , 3. (4) 5/16"-18 Lock Nuts. , 4. (4) 5/16" Flat Washers. , 5. (1) Mounting Bracket. , 6. (7) Clamps. , 7. (1) O2 Bung Plug. , 8. (2) Exhaust Flange. , 9. (2) Exhaust Rings. , 10. (1) Instructions, , NOTE: Installation of a new exhaust system may change your motorcycle's fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during, or after, installation of their product. If a jet kit or EFI controller is recommended, see the Intake & Fuel section, , NOTE: Exhaust discoloration (blueing) is caused by engine conditions such as cam timing, fuel-air mixture, operating temperature, etc. It s not the result of defective maufacturing; therefore is not covered by any warranty. See Chems & Lubes section for products that will help prevent or remove blueing.. 143002CG